OAT1049x-V5-z-yy (for 80km) OC-192/STM-64 SERDES Transceiver Modu

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

OAT1049x-V5-z-yy (for 80km) OC-192/STM-64 SERDES Transceiver Modu

Datasheet Thumbnail

Top Searches for this datasheet

OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
OAT1049x-V5-z-yy (for 80km)
OC-192/STM-64 SERDES Transceiver Module
Document Number OPS-0302-006 Revision DRAFT DATE Oct.17, 2002 Y.FUJISAKU Author ITOU Project Manager
Modification History
Rev.
DRAFT0.1 DRAFT0.2
Date
Apr.28, 2002 May30, 2002
Originator
T.ITOU T.ITOU
Comment
Revision "Block Diagram" Revision "Block Diagram" "Specifications" Addition "Absolute Maximum Ratings", "Operating Environment", "Mechanical Information", "Connector Pinout", "Precautions Handling", "Qualifications Reliability" "Laser Safety" Revision "Block Diagram", "Operation Environment", "Specifications", "Connector Pinout" "Ordering Information"
DRAFT0.3
Aug.19, 2002
Y.FUJISAKU
DRAFT0.4
Oct.17, 2002
Y.FUJISAKU
Features
SONET/SDH 9.95328Gbit/s Operation Support 10.3Gbit/s(10GbE), 10.66Gbit/s(FEC) 10.7Gbit/s(OTN) Rate Minimum Sensitivity: -22dBm Optical Output Power: +6dBm Wavelength: 1550nm Band Transmission Distance: 80km(1600ps/nm) Dispersion Penalty: <2dB 16-Bit Parallel 622.08Mbit/s (Equivalent Rate) LVDS Data Interface SERDES Timing Compliant with OIF1999.102.8 SFI-4 Interface Jitter Filter Built-in (Except Multi-Rate Type) Compact Size: 88.9 114.3 17.5 (mm) Supply Voltage: +3.3V, +1.8V -5.2V Power Consumption: max. typ.)
Applications
Metro Network SONET/SDH Systems Gigabit Ethernet Systems Forward Error Correction Systems Optical Transport Network (OTN) Systems
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
1.Block Diagram
MOD_RESET WDT_ALM EEPROM_ALM TxRESET TxALM TxFIFO TxDin[0:15]P/N TxPICLKP/N TxPICLKSEL TxFIFO TxSKEWSEL1/0
LsPOWMON LsBIASMON LsTEMPMON
DFB-LD Controller
LsPOWALM LsBIASALM LsTEMPALM LsENABLE
DFB-LD FIFO Automatic Bias Controller Jitter Filter Controller 16:1MUX Driver LN-M
OC192 Optical Output
ModBIASALM
TxREFSEL TxLOCKERR TxPCLKP/N TxMCLKP/N TxRATESEL1/0[1]
TxREFCLKP/N
RxPOWALM APD_FAIL_ALM RxPOWMON
RxDout[0:15]P/N RxPOCLKP/N RxMCLKP/N RxMUTE Dout RxLCKREF RxREFSEL RxMUTEPOCLK RxMUTEMCLK RxLOCKERR RxSIGALM RxRATESEL1/0 RxREFCLKP/N
DEMUX with
PreAmp
OC192 Optical Input
RxALM
+3.3V
+1.8V
-5.2V
Note[1]: TxREFSEL TxRATESEL1/0 available multi-rate type, OAT1049x-V5-C-yy Figure Block Diagram
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
2.Absolute Maximum Ratings
Parameter
Supply Voltage LVDS Output LVTTL Output Optical Input Power Tension Fiber Fiber Bending Radius Storage Temperature
Table Absolute Maximum Ratings Symbol Min. Max.
-0.5 -0.5 -5.75 +3.8 +2.0 +0.5 +2.0 +3.6
Unit
Tstg
3.Operating Environment
Parameter
Supply Voltage
Table Operating Environment Symbol Min. Typ.
3.13 1.71 -5.46 -5.2
Max.
3.46 1.89 -4.94
Unit
Supply Current Case Temperature Power Consumption
4.Specifications Optical Interfaces
Parameter Transmitter
Optical Output Power Optical Waveform Center Wavelength Extinction Ratio Spectral Maximum -20dB Width Side Mode Suppression Ratio SMSR c_rx
Table 4.1.1 Optical Interfaces Symbol Min. Max.
Pout OC-192/STM-64 Unamplified Mask Standard 1530 1565 1280 1580
Unit
Note
Figure 4.1.1 UIp-p BER=1x10-12 @PRBS231-1
Receiver
Minimum Sensitivity Minimum Overload Input Wavelength Return Loss
Jitter Performance
Jitter Generation Jitter Tolerance Transfer Compliant with GR-253 DLrmax 1600 ps/nm Bandpass filter; 80MHz Figure 4.1.2, 4.1.3
Optical Path
Dispersion Optical Path Penalty
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
1.25 0.75 Amplitude
Logic
0.25 -0.25 Time(UI) Figure 4.1.1 Pattern Mask
Logic
Input Jitter Amplitude [UIpp]
Acceptable Range slope=-20dB/decade
slope=-20dB/decade 0.15 400k
Jitter Frequency [Hz]
Figure 4.1.2 Jitter Tolerance Mask
Jitter Gain [dB]
slope=-20dB/decade Acceptable Range
120k Frequency [Hz]
Figure 4.1.3 Jitter Transfer Mask
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Electrical Interfaces
Table 4.2.1 Reference Clock Characteristics Name Parameter Min. Max. Unit Logic Transmitter Reference Clock
622.08 155.52[2] 644.53 161.13[2] 666.51 166.63[2] 669.33 167.33[2] 155.52/161.13/166.63/167.33 622.08/644.53/666.51/669.33 -100 +100 155.52 622.08 161.13 644.53 166.63 666.51 167.33 669.33 155.52/161.13/166.63/167.33 622.08/644.53/666.51/669.33 -100 +100
Notes
OC-192/STM-64 10GbE
Frequency TxREFCLKP/N
Coupled Multi-rate type[3] OC-192/STM-64 10GbE Single-ended voltage swing OC-192/STM-64 10GbE Multi-rate type Coupled OC-192/STM-64 10GbE Single-ended voltage swing
Frequency Tolerance Duty Cycle Input Level
Receiver Reference Clock
Frequency RxREFCLKP/N Frequency Tolerance Duty Cycle Input Level
Note[2]: Though 622MHz operation TxREFCLK standard, 155MHz operation also available. Note[3]: Multi-rate type, OAT1049x-V5-C-yy select 155MHz 622MHz.
Name Transmitter
TxDin[0:15]P/N TxPICLKP/N TxPCLKP/N
Function
Table 4.2.2 Data/Clock Interfaces Logic
LVDS LVDS LVDS LVDS LVDS
Note
TxDin0: TxDin15:
Transmitter parallel data input Transmitter source synchronous parallel input clock Transmitter parallel output clock Receiver parallel data output Receiver source synchronous parallel output clock
Receiver
RxDout[0:15]P/N RxPOCLKP/N RxDout0: RxDout15:
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Table 4.2.3 Data/Clock Timings Name Parameter Symbol Min. Max. Transmitter Data/Clock Input Timing (622MHz Mode)
TxPICLK TxDin [0:15]P/N Duty Cycle Rise Time Fall Time Setup Time Hold Time Tw/To
Unit
Note
<TxPICLKP>
<TxDinP/N>
Data valid window
Transmitter Data/Clock Input Timing (311MHz Mode)
TxPICLK Duty Cycle Rise Time Fall Time Setup Time Hold Time Define Data Invalid Window Tw/To T_dib T_dia 1100
TxDin [0:15]P/N
<TxPICLK>
<TxDinP/N>
T_dia
T_dib Data valid window
T_dia
T_dib Data valid window
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Receiver Data/Clock Output Timing
RxPOCLK RxDout [0:15]P/N Duty Cycle Rise Time Fall Time Data/Clock Skew Tw/To Tcq_min, Tcq_max
<RxPOCLKP>
Tcq_min
<RxDoutP/N>
Tcq_max
Data invalid window
Name Transmitter
TxMCLKP/N
Function
Table 4.2.4 Monitor Clocks Interface
LVDS LVDS
Note
f=TxREFCLKP/N frequency f=RxREFCLKP/N frequency
Transmitter monitor clock Receiver monitor clock
Receiver
RxMCLKP/N
TxRATESEL1
Table 4.2.5 Transmitter Data Rate Select Function TxRATESEL0 Serial Data Rate Parallel Data Rate
Note
LVTTL interface Internal pull (R>10k)
9.95328Gbit/s 10.3125Gbit/s 10.664 10.709Gbit/s
622.08Mbit/s 644.54Mbit/s 666.51 669.33Mbit/s
Note[4]: TxRATESEL1/0 available multi-rate type, OAT1049x-V5-C-yy.
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Table 4.2.6 Receiver Data Rate Select Function Serial Data Rate Parallel Data Rate
9.95328Gbit/s 10.3125Gbit/s 10.664 10.709Gbit/s 622.08Mbit/s 644.54Mbit/s 666.51 669.33Mbit/s
RxRATESEL1
RxRATESEL0
Note
LVTTL interface Internal pull (R>10k)
Name Transmitter
TxSKEWSEL TxPICLKSEL LsENABLE TxREFSEL[5] TxRESET[6] TxFIFO
Function
Table 4.2.7 Digital Control Signals Logic Description
Delays TxPICLK 915ps Delays TxPICLK 1015ps Delays TxPICLK 715ps Delays TxPICLK 815ps Selects 622MHz Selects 311MHz Normal operation Laser disabled Selects 155MHz Selects 622MHz system reset Normal operation FIFO reset Normal operation Mutes RxDout[0:15] Normal operation Locks RxREFCLK Normal operation Selects 155MHz Selects 622MHz Mutes RxPOCLK Normal operation Mutes RxMCLK Normal operation Resets both Normal operation
Note
Internal pull (R>10k) Applicable only when TxPICLKSEL Internal pull down (R>10k) Internal pull down (R>10k) Internal pull (R>10k) Internal pull (R>10k) Internal pull (R>10k) Internal pull (R>10k) Internal pull (R>10k) Internal pull down (R>10k) Internal pull (R>10k) Internal pull (R>10k)
Adjust skew TxPICLK (MSB, LSB) Selects speed input TxPICLK Enables/Disables laser Selects TxREFCLK frequency Transmitter asynchronous system reset FIFO reset
LVTTL
LVTTL LVTTL LVTTL LVTTL LVTTL
Receiver
RxMUTE Dout RxLCKREF RxREFSEL RxMUTEPO RxMUTEMC Mutes RxDout[0:15] logical zero Locks RxPOCLK RxREFCLK Selects RxREFCLK frequency Mutes RxPOCLK logical zero Mutes RxMCLK logical zero Module asynchronous system reset LVTTL LVTTL LVTTL LVTTL LVTTL
Others
MOD_RESET LVTTL Internal pull (R>10k)
Note[5]: TxREFSEL available multi-rate type, OAT1049x-V5-C-yy. Note[6]: TxRESET includes function resetting modulator bias quadrature point around
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Name Transmitter
TxLOCKERR LsPOWALM LsBIASALM LsTEMPALM TxALM ModBIASAL TxFIFO
Function
Indicates loss TxPLL lock Loss laser average power alarm Laser bias current alarm Laser temperature alarm Electrical "OR" alarms Modulator bias alarm FIFO error indicator
Table 4.2.8 Alarms Logic Description
LVTTL LVTTL LVTTL LVTTL Open collector LVTTL LVTTL Indicates loss lock Normal operation Alarm active Normal operation Alarm active Normal operation Alarm active Normal operation Alarm active Normal operation Alarm active Normal operation Alarm active Normal operation Indicates loss lock Normal operation Alarm active Normal operation Alarm active Normal operation Alarm active Normal operation high voltage range Normal operation Alarm active Normal operation error Normal operation Program load error Normal operation
Note
Output degrades below (BOL) 150mA (typ.) Without range Excluding functions +/-0.1K local
Receiver
RxLOCKERR RxPOWALM RxSIGALM RxALM APD_FAIL_ WDT_ALM EEPROM_AL Loss lock RxPOCLK Loss receiver average power alarm Loss receiver a.c. power alarm Electrical "OR" alarms High voltage DC/DC converter error Electrical "OR" alarms watch timer error Program load error LVTTL LVTTL LVTTL Open collector LVTTL Open collector LVTTL LVTTL
Pin<-25dBm (typ.) Pin<-30dBm (typ.) Excluding functions Local function Excluding local functions Figure 4.2.1 Local function Local function local
Others
1ms(min.) Alarm Auto Reset
Normal Operation
Abnormal Operation
Figure 4.2.1 Operation WDT_ALM
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Table 4.2.9 Monitor Signals Min.
0.44 17.8
Name Transmitter
LsPOWMON LsTEMPMON LsBIASMON RxPOWMON[7]
Function
Typ.
0.25
Max.
0.56 22.5
Unit
mV/K mV/mA V/mW
Laser output power monitor (BOL) variation laser power Laser temperature monitor Laser temperature monitor slope Laser bias current monitor Receiver power monitor
Receiver Note[7]: RxPOWMON incorrect case -5dBm. Table 4.2.10 LVDS Interfaces Symbol Min. Input
LVDS Common Mode Input Voltage LVDS Differential Input Swing LVDS Input High Voltage LVDS Input Voltage LVDS Differential Input Impedance LVDS Rise Fall Times (VA+VB)/2 VA-VB 1100 1200 2200 2400 1300 mVpp mVpp
Typ.
Max.
Unit
Output
LVDS Common Mode Output Voltage LVDS Differential Output Swing LVDS Output High Voltage LVDS Output Voltage LVDS Differential Output Impedance LVDS Rise Fall Times (VA+VB)/2 VA-VB
Table 4.2.11 LVTTL Interfaces Symbol Min. Input
Input High Voltage Input Voltage 2000 -300 2400
Typ.
Max.
5500
Unit
Output
Output High Voltage Output Voltage
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Mechanical Information
View
Figure Package Outline (Unit:mm) Table 5.1.1 Dimensions (with Heat Sink) Dimensions Unit
Width Length Height 88.9 114.3 17.5
Table 5.1.2 Connectors
Optical Electrical SC/PC type standard Other connectors available @FC, 300pin BERG MegArray @84501-10X
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy
Document QPS-0302-006 Rev. DRAFT
6.Connector Pinout
RxRATESEL0 (+)3.3V (+)3.3V (+)3.3V (+)3.3V RxMUTEPOCLK (-)5.2V (-)5.2V RxMUTEMCLK (-)5.2V (-)5.2V (+)3.3V (+)3.3V TxRATESEL0 (+)3.3V (+)3.3V TxRESET (-)5.2V (-)5.2V TxFIFO (-)5.2V (-)5.2V TxFIFO RxRATESEL1 WDT_ALM RxALM TxALM ModBIASALM TxRATESEL1 APD_FAIL_ALM EEPROM_ALM RxDout12P RxDout12N RxDout13P RxDout13N RxDout14P RxDout14N RxDout15P RxDout15N TxDin12P TxDin12N TxDin13P TxDin13N TxDin14P TxDin14N TxDin15P TxDin15N TxPICLKP TxPICLKN (+)1.8V (+)1.8V RxPOWMON (+)3.3V (+)3.3V RxPOWALM (+)3.3V (+)3.3V (-)5.2V (-)5.2V RxSIGALM (-)5.2V (-)5.2V RxREFSEL (+)1.8V (+)1.8V LsBIASMON (+)3.3V (+)3.3V LsENABLE (+)3.3V (+)3.3V LsBIASALM (-)5.2V (-)5.2V LsTEMPALM (-)5.2V (-)5.2V TxREFSEL RxDout8P RxDout8N RxDout9P RxDout9N RxDout10P RxDout10N RxDout11P RxDout11N RxPOCLKP RxPOCLKN TxDin8P TxDin8N TxDin9P TxDin9N TxDin10P TxDin10N TxDin11P TxDin11N TxPCLKP TxPCLKN MOD_RESET LsPOWMON LsTEMPMON LsPOWALM RxDout4P RxDout4N RxDout5P RxDout5N RxDout6P RxDout6N RxDout7P RxDout7N RxMCLKP RxMCLKN TxDin4P TxDin4N TxDin5P TxDin5N TxDin6P TxDin6N TxDin7P TxDin7N TxMCLKP TxMCLKN RxMUTE Dout RxLCKREF RxLOCKERR TxSKEWSEL0 TxSKEWSEL1 TxPICLKSEL TxLOCKERR RxDout0P RxDout0N RxDout1P RxDout1N RxDout2P RxDout2N RxDout3P RxDout3N RxREFCLKP RxREFCLKN TxDin0P TxDin0N TxDin1P TxDin1N TxDin2P TxDin2N TxDin3P TxDin3N TxREFCLKP TxREFCLKN
NUC: User Connection
Electric Industry Co., Optical Component Company
OC-192/STM-64 SERDES Transceiver Module Specification; OAT1049x-V5-z-yy Document QPS-0302-006 Rev. DRAFT
Precautions Handling
circuits these modules operate very small signal. order avoid degradation optical sensitivity external noise, bottom pattern these modules should ground pattern with impedance. mount/pattern device/circuits which generate high frequency noise close module. order operate module stable against power noise, install power supply noise reduction circuits. impedance between power ground pattern power circuit should possible. elements around module should mounted close pins module. optical power exceeding absolute maximum ratings module, optical receiver damaged. optical input power appropriately when these modules.
Qualifications Reliability
help ensure high product reliability customer satisfaction, committed intensive quality program that starts design phase proceeds through manufacturing process. Optical transceiver modules qualified internal standards using MIL-STD-883 test methods procedures using sample techniques consistent with Telcordia requirements. This qualification program fully meets intent Telcordia reliability practices GR-468-CORE.
Laser Safety
version transceiver Class Laser products complies with 1040.10 1040.11 requirements. Also, versions Class Laser products 825-1.
Ordering Information
OAT1049x-V5-z-yy
Table 10.1 Ordering Information
Optical connector
rate(Gbit/s)
9.95 10.3 9.95/10.3/10.6/10.7 10.7 10.6
Fiber length(m)
(blank)
TxREFCLK frequency
622MHz 155MHz
Note[8]: case z=A, added when 155MHz specified TxREFCLK frequency.
Electric Industry Co., Optical Component Company

OAT1049x-V5-z-yy (for 80km) OC-192/STM-64 SERDES Transceiver Modu

Top Searches for this datasheet

Other recent searches