High Frequency Vibration Measurement Compatible Ground Isolated with F

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

High Frequency Vibration Measurement Compatible Ground Isolated with F

Datasheet Thumbnail

Top Searches for this datasheet

Model 5220-HF
High Frequency Vibration Measurement Compatible Ground Isolated with Faraday Shielding Resonance Suppression Circuitry
ENDEVCO
MODEL 5220-HF
DESCRIPTION
ENDEVCO® Model 5220-HF series accelerometer complies with requirements designed specifically wide bandwidth vibration measurement rugged environments industrial machinery monitoring. This accelerometer incorporates internal signal conditioning provide impedance output. Model 5220-HF offers very wide dynamic range extremely noise floor. Model 5220-HF incorporates active 2-pole low-pass filter resonance suppression. Signal ground isolated from mounting surface outer case prevent ground loops, sensor hermetically sealed ensure long-term operation with excellent stability. Model 5220-HF incorporates faraday shielding limit sensitivity minimum. Model 5220-HF features ENDEVCO's PIEZITE® Type crystal element, operating shear mode, electrically isolated sensor charge amplifier unit. Model 5220-HF provided with 1/4-28 mounting stud 1.25-6g metric adaptor mounting stud. following performance specifications conform ISA-RP-37.2 (1-64) typical values, referenced +24°C (+75°F), supply, constant current unless otherwise noted. Calibration data, traceable National Institute Standards Technology (NIST), supplied.
DYNAMIC CHARACTERISTICS RANGE VOLTAGE SENSITIVITY ±10% FREQUENCY RESPONSE RESONANCE FREQUENCY (Typical) AMPLITUDE RESPONSE TEMPERATURE RESPONSE -50°C (-58°F) +120°C (+248°F) TRANSVERSE SENSITIVITY AMPLITUDE LINEARITY peak Units mV/g
.877 (22.28) .865 (21.97)
ENDEVCO IDENTIFICATION INFORMATION THIS SURFACE DIA. (21.3)
.655 (16.64)
1.90 (48.3) 1.25 (31.8) (19.0) (6.3) .0005 1/4-28 UNF-2B MTG. THREAD DIA. (7.3) DIA. (20.3) (5.1)
(1.27)
Typical Curve
TYPICAL TEMPERATURE RESPONSE
TYPICAL AMPLITUDE RESPONSE
DEVIATION
DEVIATION
10000
1000
(-51)
(-7)
(38)
(82)
(127)
FREQUENCY HERTZ
TEMPERATURE (°C)
APPLIES CALIFORNIA FACILITY
ENDEVCO
MODEL 5220-HF
SPECIFICATIONS
following performance specifications conform ISA-RP-37.2 (1964) typical values, referenced +75°F (+24°C), supply, unless otherwise noted. Calibration data, traceable National Institute Standards Technology (NIST), supplied.
OUTPUT CHARACTERISTICS OUTPUT POLARITY OUTPUT BIAS VOLTAGE with peak vibration input: 24°C (75°F) -50°C +99°C (-58°F +211°F) +100°C +120°C (+212°F +248°F) OUTPUT IMPEDANCE FULL SCALE OUTPUT VOLTAGE RESIDUAL NOISE typical (max) 120° typical (max) typical (max) 120° typical (max) GROUNDING ISOLATION -58°F 248°F (-50°C +120°C) POWER REQUIREMENT SUPPLY VOLTAGE SUPPLY CURRENT OVER VOLTAGE PROTECTION WARM-UP TIME within final bias REVERSE POLARITY PROTECTION ENVIRONMENTAL CHARACTERISTICS TEMPERATURE RANGE HUMIDITY SINUSOIDAL VIBRATION LIMIT SHOCK LIMIT BASE STRAIN SENSITIVITY PHYSICAL CHARACTERISTICS DIMENSIONS WEIGHT CASE MATERIAL MATING PLUG MOUNTING TOUQUE CALIBRATION SUPPLIED: SENSITIVITY
ACCESSORIES MODEL 2984-2 MODEL 2984-8 ACCESSORIES MODEL 6923M9 MODEL 6923M16
Units Acceleration directed into base produces positive output 11.5 12.5 10.0 13.5 ±100 mV/°C mV/°F (600) (600) (60) (80) Signal ground isolated from case connected Faraday shield
Provided
equiv. pk/µ strain
-50°F +120°F (-58°C +248°C) Hermetic sealed 5000 .002
without cable
in-lbs (N-m)
Outline Drawing (3.17) 316L Stainless Steel MS3106 10SL (2.9)
mV/g
INCLUDED 1/4-28 Adaptor Stud 1/4-28 UNF/M8 1.25-6g Adaptor Stud OPTIONAL Cable Assembly (MS3456L-10SL-4S Connector), single shield Cable Assembly (MS3456L-10SL-4S Connector), double shield
ISOTRON (each channel)
Constant Current Source
Voltage Supply
Biased Output
Decoupling Capacitor
Unbiased Output
NOTES Also available with corner frequency down 0.08 Optional connector options also available specifying following: 5220M4 Two-pin spring terminals easy detachment 5220M5 Three-pin quick disconnect mating with PT06-83S connector 5220M6 quick disconnect mating with coax cable assemblies. 5220M6 does allow signal ground isolation
Maintain high levels precision accuracy using Endevco's factory calibration services. Call Endevco's inside sales force 800-982-6732 recommended intervals, pricing turn-around time these services well quotations standard products.
Continued product improvement necessitates that Endevco reserve right modify these specifications without notice. Endevco maintains program constant surveillance over products ensure high level reliability. This program includes attention reliability factors during product design, support stringent Quality Control requirements, compulsory corrective action procedures. These measures, together with conservative specifications have made name Endevco synonymous with reliability. ENDEVCO CORPORATION, 30700 RANCHO VIEJO ROAD, JUAN CAPISTRANO, 92675 (800) 982-6732 (949) 493-8181 (949) 661-7231 www.endevco.com Email:applications@endevco.com 1100

High Frequency Vibration Measurement Compatible Ground Isolated with F

Top Searches for this datasheet

Other recent searches