1991, 1992, 1994, 1996 Document C10943XJ6V0IF00 (Previous IEI-635

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

1991, 1992, 1994, 1996 Document C10943XJ6V0IF00 (Previous IEI-635

Datasheet Thumbnail

Top Searches for this datasheet

PACKAGE MANUAL
1991, 1992, 1994, 1996
Document C10943XJ6V0IF00 (Previous IEI-635, IEI-1213) Date Published January 1996 Printed Japan
CHAPTER PACKAGE OUTLINES EXPLANATION CHAPTER THROUGH HOLE PACKAGES
CHAPTER
SURFACE MOUNT PACKAGES
CHAPTER
PACKING PACKAGES
APPENDIX
REFERENCES
INTRODUCTION
Packages semiconductor products have been diversified become more complicated recent years chiefly because these packages have significant clue increasing density electronic systems where they semiconductor products they house employed. Take products example. through hole device (THD), whose representative package been dual in-line package (DIP), have increasingly employed newly developed packages such those with shrunk lead pitches, zig-zag line packages (ZIP), quad in-line packages (QUIP), grid array packages (PGA), order contribute increasing density board which device mounted. addition, order satisfy demands compact slim packages, surface mount device (SMD) packages such small outline packages (SOP), quad flat L-leaded packages (QFP), quad flat J-leaded packages (QFJ) have been developed increasingly made their through market. This manual describe packages THDs SMDs, including their dimensions packing style, order deepen your understanding these diversified packages. recommended that also refer "Semiconductor Device Mounting Technology Manual" (C10535E) separately available. January, 1996 Corporation Semiconductor Solution Engineering Div.
CONTENTS
CHAPTER PACKAGE OUTLINES EXPLANATION Types Packages
1.1.1 Classification packages 1.1.2 Outer view characteristics package
Standardization Packages Names NEC's Packages Package Codes EIAJ Dimension Code Example Dimensions
1.5.1 Example dimensions packages 1.5.2 Dimensional symbols
CHAPTER THROUGH HOLE PACKAGES Lineup Through Hole Packages List Through Hole Packages Dimensions Through Hole Packages
CHAPTER SURFACE MOUNT PACKAGES Lineup Surface Mount Packages List Surface Mount Packages Dimensions Surface Mount Packages CHAPTER PACKING PACKAGES Packing Styles Notes
4.1.1 Packing styles 4.1.2 Notes handling
Packing Packages
4.2.1 List packing 4.2.2 Packing dimensions packages
APPENDIX REFERENCES Glossary Packages
CHAPTER
PACKAGE OUTLINES EXPLANATION
CHAPTER
PACKAGE OUTLINES EXPLANATION
1.1.1
Types Packages Classification packages
following figure classifies packages semiconductor products:
QUIP Through hole mount type V-DIP
Shrink
Single in-line module Dual in-line module Piggyback Packages Shrink TSOP (Type WSOP (fine pitch) TQFP Surface mount type J-lead I-lead WQFN LQFP L-lead L-lead (Gull wing lead)
CHAPTER
PACKAGE OUTLINES EXPLANATION
1.1.2
Outer view characteristics package
Package Name Appearance Characteristics Terminals opposite sides package arranged rows. Lead pitch 2.54 (100 mil)
Shrink
Terminals opposite sides package arranged rows. Lead pitch 1.778 mil)
QUIP Through Hole Type
Terminals opposite sides package arranged four rows. Lead pitch 1.27 mil)
Terminals side package arranged row.
Terminals side package bent alternately within package thickness. Lead pitch 1.27 mil) 0.889 mil)
CHAPTER
PACKAGE OUTLINES EXPLANATION
Package Name V-DIP
Appearance
Characteristics Terminals side package bent through hole mounting.
Terminals surface package arranged grid array.
Through Hole Type
SINGLE IN-LINE MODULE
Module with single pins, terminals side module.
PIGGYBACK
THD's package with connection terminals mounting other packages.
CHAPTER
PACKAGE OUTLINES EXPLANATION
Package Name
Appearance
Characteristics Terminals opposite sides package formed gull wing shape. (L-shape) Lead pitch 1.27 mil)
SSOP
Terminals opposite sides package formed gull wing shape. (L-shape) Lead pitch 0.65
TSOP Surface Mount Type
Terminals opposite sides package's shortest side formed gull wing shape. (L-shape) Package seating height (Nom.) 1.27 (Max.). Lead pitch
TSOP (II)
Terminals opposite side package's longest side formed gull wing shape. (L-shape) Package seating height (Nom.) 1.27 (Max.). Lead pitch 1.27
WSOP
with transparent window
CHAPTER
PACKAGE OUTLINES EXPLANATION
Package Name
Appearance
Characteristics Terminals four sides package formed gull wing shape. (L-shape) Lead pitch 0.65
(FP)
Terminals four sides package formed gull wing shape. (L-shape) Lead pitch
Surface Mount Type
Terminals side package formed L-shape.
Terminals opposite sides package formed J-shape. Lead pitch 1.27 mil)
Terminals four sides package formed J-shape. Lead pitch 1.27 (PLCC)
CHAPTER
PACKAGE OUTLINES EXPLANATION
Package Name (Surface Mount Type)
Appearance
Characteristics Terminals surface package arranged grid array formed I-shape.
Package with contact electrodes top, side bottom face surface mounting purposes. (LCC)
Surface Mount Type
WQFN
with transparent window
Tape consisting insulation film with copper pattern, which bumped chip connected leads film pattern.
Balls surface package arranged grid array.
CHAPTER
PACKAGE OUTLINES EXPLANATION
Standardization Packages
necessary that packages standardized manufacturers that they easy users. Therefore, standardizes packages exchanging opinions with users, related system manufacturers, parts supplier, actively participating various activities standardization. These activities standardization packages, shown figure below, developed Japan, United States, European nations. international standardization activities promoted Working Group (WG7) Technical Committee (TC-47) International Electrotechnical Commission (IEC). Japan, these activities organized Technical Standardization Committee Semiconductor Device Package (EE-13), subcommittees subordinate organizations Electronic Industry Association Japan (EIAJ). United States, organization semiconductor packages (JC-11) Joint Electronic Device Committee, subordinate organization Electronic Industry Association, mainly responsible standardization activities. These standardization activity organizations shown Fig. 1-1. activities each organization periodically conducted actively promoted. Fig. Standardization Activity Organizations
World IEC; TC-47, (Deliberation: times/year) International Electrotechnical Commission
Committee Japan
Committee U.S.A
Committee each country
EIAJ Technical Standardization Committee Semiconductor Device Package; EE-13 (Deliberation: Once/2 months)
JEDEC; JC-11 (Deliberation: times/year)
Standardization organization each country
Sub-comittee Plastic Package Sub-committee Ceramic Package Sub-committee Discrete Semiconductor Package Sub-committee Semiconductor Packing
Electronic Industries Association Japan Electronic Industries Association JEDEC Joint Electron Device Engineering Council EIAJ
CHAPTER
PACKAGE OUTLINES EXPLANATION
[EIAJ Standards] EIAJ standards enacted Technical Standardization Committee Semiconductor Device Package (EE-13), which consists semiconductor manufacturers, package manufacturers, socket manufacturers, major standards related packages enacted this committee follows:
General Rules Preparation Outline Drawings Integrated Circuits ED-7402-1 ED-7402-2A ED-7402-3 ED-7402-4A ED-7403-1 ED-7404A ED-7405 ED-7405-1 ED-7406A ED-7407 ED-7408A ED-7409 ED-7410 ED-7412 ED-7413 ED-7414 ED-7415 ED-7417 ED-7418 ED-7419 ED-7421 ED-7422 ED-7423 ED-7424 ED-7431 ED-7432 ED-7433 Others ED-7400 ED-7400-1 ED-7400-2 ED-7401A Standards dimensions semiconductor devices (integrated circuits) Standards dimensions semiconductor devices (integrated circuits) Standards dimensions semiconductor devices (integrated circuits) Recommended practice General Rules preparation outline drawings semiconductor packages (Integrated Circuits, Discrete Semi conductor Device) Manual peparation outline drawings semiconductor device package (Integrated Circuits) Package name code semiconductor device package (Integrated Circuits) Method Measuring semiconductor device package Dimensions (Integrated Circuits) Recommended outline drawings Carriers Quad Tape Carrier Package carriers (QTP Carrier) Standards packages universal Memory-devices Standards dimensions semiconductor devices (discrete semiconductor devices) Standards dimensions semiconductor devices (discrete semiconductor devices) Recommended practice preparation outline drawings semiconductor packages (Discrete Semiconductor Device) (1990. (1990. (1991. Small outline package Shrink small outline package SSOP Thin small outline package (type TSOP Thin small outline package (type TSOP (II) Plastic dual in-line package Quad flat package Zigzag in-line package Shrink zigzag in-line package SZIP Small outline J-leaded package Quad flat J-leaded package grid array package Quad flat I-leaded package Small outline I-leaded package Quad flat leadless package Single in-line package Guard ring quad flat package GQFP Small outline package with head sink HSOP Bumpered quad flat package BQFP Glass seal quad flat package QFP-G Glass seal dual in-line package DIP-G Ceramic dual in-line package DIP-C Glass seal quad flat J-leaded package QFJ-G Ceramic quad flat J-leaded package QFJ-C Surface vertical package Quad tape carrier package Dual tape carrier package (Type Dual tape carrier package (Type (II) (1989. (1993. (1991. (1991. (1988.04.28) (1994. (1991. (1990. (1995. (1988. (1994. (1988. (1988. (1988. (1989. (1989. (1989. (1990. (1990. (1990. (1991. (1992. (1993. (1993. (1993. (1993.12) (1993.12)
(1995. (1994. (1994. (1994. (1994. (1991. (1990. (1992. (1992.
ED-7401-1 ED-7401-2 ED-7401-4 ED-7431-1 ED-7441 ED-7500 ED-7500-1 ED-7501
above rules standards readily available from Electronic Industry Association Japan (EIAJ).
CHAPTER
PACKAGE OUTLINES EXPLANATION
[JEDEC standards] JEDEC standards deliberated semiconductor package-related activity organization (JC-11), subordinate organization EIA, enacted sequence which standards registered, with type name given. Example semiconductor device (integrated circuit) package with more pins semiconductor device (transistor) package with more pins semiconductor device (diode) package with more pins [IEC standards] standards internationally standards deliberated enacted based proposals extended from standardization activity organizations major countries producing semiconductor devices. Here examples standards: IEC-Publication-148 IEC-Publication-191 IEC-Publication-747 IEC-Publication-286.3 Character codes semiconductor elements integrated circuits Package standardization semiconductor elements integrated circuits Ratings characteristics semiconductors measuring methods Parts packing style automatic mounting
CHAPTER
PACKAGE OUTLINES EXPLANATION
Names NEC's Packages indicates names packages following format:
Nominal dimensions (option) (300 mil)
Number pins
Material
style (option)
style
Supplement (option)
(Ex.)
Plastic Plastic Plastic Ceramic Ceramic
Shrink
(Straight) (Glass sealed)
Number pins principle, number pins based pitch indicated, i.e., number pins includes missing pins. preventing insertion wrong direction included number pins PGA. case outermost drawn out, above principle observed. Material sealing materials package indicated. distinguish between glass sealed seal ring products between cerdip seam weld products, code indicated position Supplement. Example 28-pin ceramic (cerdip) (300 mil) 72-pin ceramic (Glass sealed) Package style (option) following codes indicated package that features which cannot indicated package style (2): Example (Shrink). Reduced pitch Thin With window
CHAPTER
PACKAGE OUTLINES EXPLANATION
Package style most appropriate following codes indicated: Example DIP, SOP, Supplement (option) Information that supplements code package style package style indicated. Example (straight) (Glass sealed) Nominal dimensions (option) nominal dimensions always indicated package whose nominal dimensions determined. nominal dimensions each package follows:
CHAPTER
PACKAGE OUTLINES EXPLANATION
Package Name SDIP QUIP Slim
Symbol Direct terminal pitch
Nominal Dimensions 300, 400, 600, (mil), etc.
Maximum mounting height Amax
325, 400, 475, (mil), etc.
V-DIP SINGLE IN-LINE MODULE Piggyback SSOP TSOP
array: column)
Mount pitch Outermost dimensions package
225, 300, 375, 450, 525, (mil), etc.
(mm)
TSOP
Package width
300, 350, 400, 450, 500, 550, (mil)
TQFP
Package size
etc. Rectangle: etc. (mm)
Square:
Package width
300, 350, 400, (mil), etc.
Package size
350, 450, 650, 750, 950, 1350, 1650 Rectangle: 285, 290, 350, (mil) Square: 300, 350, 1150 (mil) Rectangle: 285, (mil) Tape width: (mm) Square:
Square:
1150,
Package size Tape width-Package size
(mm)
CHAPTER
PACKAGE OUTLINES EXPLANATION
Package Codes EIAJ
EIAJ regulates names codes package Integrated Circuit Dimension Rule "Package Name Code" ED-7401-2, follows: Package code configuration
Feature package appearance 2-characters designation (4-characters MAX.) Package name 4-characters designation Number pins 4-characters designation (8-characters MAX.) Package material characteristics 1-character designation Package reference dimensions 4-character designation Terminal spacing linear 4-characters designation Meanings package codes Features package appearance Priority Functional Classification Code Mount functional addition Outline functional addition Lead protection Package thickness Terminal pitch position Basic Type Package Packages fitted with post support mounting. Packages fitted with lead support mounting. Packages fitted with head sink heat release. Packages fitted with translucent window. Piggy back packages. Packages fitted with test pad. Packages fitted with bumper lead protection. Packaged fitted with guard ring lead protection. Packages fitted with insulator lead protection. Packages package body thickness. Packages package body thickness. Packages package body thickness. Packages where basic type package terminal straight line pitch been reduced. Packages where basic type package terminal straight line pitch been expanded. Packages which terminals face-centered cubic array. Application
Note: under terminal pitch position will apply packages.
CHAPTER
PACKAGE OUTLINES EXPLANATION
(ii) Names packages Form Code Package Name Quad Flat Package Quad Flat I-Leaded Package Quad Flat J-Leaded Package Quad Non-Leaded Package Dual Inline Package Small Outline Package Small Outline I-Leaded Package Small Outline J-Leaded Package Small Outline F-Leaded Package Small Outline Non-Leaded Package Single Inline Package Zigzag Inline Package Surface Vertical Package Grid Array Land Grid Array Ball Grid Array Dual Tape Carrier Package Quad Tape Carrier Package
(iii) Number package pins (example code) Code Number Package Terminals 0008 0014 0064 0144 0256
number packages basically indicates number actually existing with following exceptions. Note: example, case package with pins missing, five characters allowed, giving code 28/26.
CHAPTER
PACKAGE OUTLINES EXPLANATION
(iv) Package body material codes Code Material Ceramic Ceramic Metal Plastic Plastic/glass Tape Application Multi-layered construction packages. Glass sealed ceramic packages. Packages metal material composition. Packages formed from resin. Packages composed plastic glass compound board. Packages tape composition.
Package nominal dimensions (code example) Package Name TSOP TSOP SSOP Nominal Dimensions Pakage body size (mm) Terminal pitch Package body size (square/rectangle) Package body size (square/rectangle) Package maximum attachment height Package maximum attachment height Terminal pitch Matrix size (cavity up/down) Distance between mount centers Outermost side dimensions (mm) Package body width Terminal pitch Package body width Package body width Package body size (mm) Package body width Code Example* 1010, 1420, etc. 0325, 0400, etc. S115, R400, etc. R285, S350, etc. 0240, 0440, etc. 0325, 0400, etc. 0300, 0400, etc. S10U, R11D, etc. 0225, 0300, etc. 1014, 0820, etc. 0300, 0400, etc. 0300, 0400, etc. 0300, 0400, etc. 0300, 0044, etc. 0516, 1336, etc. 0300, 0450, etc.
Note*:
English letters code examples indicate following contents: SQUARE RECTANGLE CAVITY CAVITY DOWN
CHAPTER
PACKAGE OUTLINES EXPLANATION
(vi) Terminal spacing linear (example code) Code 2.54 1.78 1.27 1.00 0.80 0.65 0.50 0.40 0.30 Example package code indication Usually, digits package code used. However, following abbreviated code also used: Basic codes examples Package Code *ZIP0020-P-0400-1.27 SDIP0064-C-0750-1.27 *PGA0144-C-S15U-2.54 *SOP0028-P-0450-1.27 *SOJ0026-P-0300-1.27 *QFP0080-P-1420-0.65 TSOPI0032-P-S115-1.27 *QFJ0084-P-S115-1.27 SSOP0040-P-0450-0.80 PSSVP0024-P-0516-0.15 DTPI0016-T-0300-1.27 Abbreviated codes examples Package Code ZIP20-P-400-1.27 SDIP64-C-750-1.27 PGA144-C-S15U-2.54 SOP28-P-450-1.27 SOJ26-P-399-1.27 QFP80-P-1420-0.65 TSOPI32-P-1014-1.27 QFJ84-P-S115-1.27 SOP40-P-450-0.80 PSSVP24-P-516-0.15 DTPI16-T-300-1.27 Terminal spacing linear 2.54 1.778 1.27 1.00 0.80 0.65 0.50 0.40 0.30 Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch
CHAPTER
PACKAGE OUTLINES EXPLANATION
1.5.1
Dimension Code Example Dimensions Example dimensions packages
Term Mounting height Stand-off height Main unit height Maximum terminal length Terminal width Terminal width (Max.) Direct terminal pitch Package overhang Package length Direct terminal pitch Package width Terminal thickness Terminal angle
Code
Meaning Distance from mounting surface edge package Distance from mounting surface base surface (bottom edge package) Height package itself Length terminal from munting surface terminal Width terminal inserted into mounting hole board Maximum width Terminal Direct true geometrical position center terminal Distance from true position terminal outermost position edge package Longest dimension package true geometrical position center terminal Width package Thickness terminal Angle between terminal line right angles mounting surface
CHAPTER
PACKAGE OUTLINES EXPLANATION
Base surface
Terminal neck
Term Mounting height Stand-off height Main unit height Maximum terminal length Terminal width Straight terminal pitch Package Package Distance rows Package Terminal overhang length between terminal width thickness
Code
Meaning Distance from mounting surface edge package Distance from mounting surface base surface (bottom edge package) Height package itself Length terminal from mounting surface terminal Width terminal inserted into mounting hole board Direct true geometrical position center terminal Distance from true position terminal outermost position edge package Longest dimension package true geometrical position center terminal Width package Thickness terminal
CHAPTER
PACKAGE OUTLINES EXPLANATION
Note
Heat sink
Orientation
ANote
Note Seated height includes heat sink height. (Case heat sink package) Heat sink dimensions mentions "E1" "D1". (Case heat sink package)
Term Mounting height Stand-off height Package body height Stopper diameter Terminal width Straight line spacing Package width Package length Terminal length Package overhang Heat sink width Heat sink length
Code
Meaning Distance from mounting surface edge package Distance from mounting surface base surface (bottom edge package) Height package itself Diameter stopper Diameter terminal inserted into mounting hole board Direct true geometrical position center terminal Width package Maximum dimensions package Length from mounting surface terminal Distance from true position terminal outermost position edge package Width heat sink Length heat sink
CHAPTER
PACKAGE OUTLINES EXPLANATION
Term Nominal size Seating plane Base plane Mounting height Stand-off height Package height Terminal width Terminal thickness Package length Package width Terminal spacing linear Package overhang Overall width Length flat part terminal Terminal length Tolerance terminal center Uniformity bottom face terminal
Code
Meaning Size package. Center-to-center distance mount pads Plane determined when placed horizontal surface Plane that runs along bottom surface package parallel with mounting surface Distance from mounting surface package Distance from mounting surface base surface Height package from base plane package Width each terminal Thikcness terminal (including plating) Length package Width package (excluding resin burr) Direct true geometrical position center terminal. Also called lead pitch Distance from true position terminal outermost position edge package Width including terminal length Length part projected terminal mounting surface contacting mounting Length terminal projected mounting surface package from terminal Difference center each from original position. Maximum measure condition (MMC) applied Maximum value difference each terminal from plane right angles mounting surface. Conventionally, this indicated (outline tolerance plane) indicated (parallel tolerance) compliance with international standards angle between terminal flat part mounting surface
Angle terminal flat part
CHAPTER
PACKAGE OUTLINES EXPLANATION
Detail lead
Term Nominal size Seating plane Mounting height Stand-off height Package height Terminal width Terminal thickness Package length Package width Terminal spacing linear Package overhang Overall length Overall width Length flat part terminal Terminal length Tolerance terminal center Uniformity bottom face terminal Angle terminal flat part
Code
Meaning Size package Plane determined when placed mount Distance from mounting surface package Distance from mounting surface base surface (bottom surface package) Height package from base plane package Width each terminal Thickness terminal (including plating) Maximum dimensions package, excluding terminal, parallel with mounting surface Maximum dimensions package, excluding terminal, parallel with mounting surface Direct true geometrical position center terminal. Also called lead pitch Distance from true position terminal outermost position edge package Dimensions including terminal length peripheral terminal existing longitudinal direction package Width including terminal length peripheral terminal existing latitudinal direction package Length part projected terminal mounting surface contacting mounting Length terminal projected mounting surface package from terminal Difference center each from original position Maximum measure condition (MMC) applied Maximum value difference terminal from mounting surface direction right angles mounting surface angle between terminal flat part mounting surface
CHAPTER
PACKAGE OUTLINES EXPLANATION
Term Nominal size Seating plane Seating height Stand-off height Package height Terminal height Tolerance terminal center Maximum terminal width Terminal width Terminal thickness Package length Package width Terminal spacing linear Package overhang Terminal spacing linear Overall length Overall width Uniformity bottom face terminal
Code e1E,
Meaning Size package Plant determined when placed mount Distance from mounting surface package Distance from mounting surface base surface (bottom surface package) Height package from base plant package Distance terminal projecting from package from surface mounting surface Difference center each from original position Maximum measure condition (MMC) applied Maximum width each terminal Width each terminal Thickness terminal (including plating) Maximum dimensions package, excluding terminal, parallel with mounting surface Maximum dimensions package, excluding terminal, parallel with mounting surface Direct true geometrical position center terminal. Also called lead pitch Distance from true position terminal outermost position edge package Direct center bending terminal Dimensions including terminal length peripheral terminal existing longitudinal direction package Width including terminal length peripheral terminal existing latitudinal direction package Maximum value difference terminal from mounting surface direction right angles mounting surface
CHAPTER
PACKAGE OUTLINES EXPLANATION
1.5.2
Dimensional symbols
Reference dimensions "true geometric location" Theoretical dimension enclosed square. Examples: 1.27 2.54 Dimensional indication geometric tolerance
Tolerance indication accoding Tolerance Type geometric tolerance (positional tolerance example)
Maximum material condition (MMC) Applied allowable positional tolerance terminals. (refer ISO/1101, Parts Positional tolerance terminals (See note) 0.25 Note Tolerance deviation from "true" position (the center each terminal) cumulative error. Example
0.25
terminal width (b1) maximum, allowable deviation from center terminal ("true" position) 0.25 terminal width (b1) less than maximum, tolerance increased proportionally.
CHAPTER
PACKAGE OUTLINES EXPLANATION
(Tolerance terminal center) Through hole packages (Standard DIP) terminal width (b1) maximum, allowable deviation from center terminal ("true" position) 0.25 terminal width (b1) less than maximum, tolerance increased proportionally. Terminal center figure below true position maximum terminal width (b1) tolerance standard are, respectively, 0.60 0.25 Therefore, allowable terminal existing range calculated follows: max. 0.60
0.25
0.25
0.85
0.50±0.10
0.25
0.60
0.25
0.25
0.60
0.85
2.54 Hole diameter
CHAPTER
PACKAGE OUTLINES EXPLANATION
Surface mount packages (SOP) terminal width (b1) maximum, allowable deviation from center terminal ("true" position) 0.12 terminal width (b1) less than maximum, tolerance increased proportionally. figure below shows that center shifted from true center maximum width, bMAX, 0.50 positional tolerance, 0.12 allowable existing range 0.62 obtained following expression: bMAX 0.50
0.12
0.12
0.62 recommended mounting width 0.76 allow position shift ±0.07 unless self-aligning effect cannot expected.
0.50
0.12
0.12
0.50
0.07
0.62
0.07
0.76
Mounting
Printed-circuit board 1.27
CHAPTER
THROUGH HOLE PACKAGES
CHAPTER
THROUGH HOLE PACKAGES
LINEUP THROUGH HOLE PACKAGES LIST THROUGH HOLE PACKAGES DIMENSIONS THROUGH HOLE PACKAGES Plastic (Dual In-line Package) Ceramic (Dual In-line Package) Plastic (Single In-line Package) Plastic V-DIP (Vertical Dual In-line Package) Plastic (Zig-zag In-line Package) QUIP (Quad In-line Package) Piggyback (DIP, QUIP, Shrink DIP) Ceramic (Pin Grid Array) Plastic (Pin Grid Array) outline dimensioned drawings subject change. Refer latest data sheet product before actually employing product. package weight rough estimate.
V-DIP
QUIP Piggyback
CHAPTER
THROUGH HOLE PACKAGES
Lineup Through Hole Packages
following show lineup Through Hole packages products. Plastic
Nominal Dimensions (mil) 1.778 2.54
Lead Pitch (mm)
Counts
Ceramic
Nominal Dimensions Lead Pitch (mm) (mil)
Cerdip
Counts
2.54
Seam weld
2.54
1.778
Window
2.54 1.778
CHAPTER
THROUGH HOLE PACKAGES
Plastic
Nominal Dimensions
Lead Pitch (mm) 1.27
Counts
2.54
Plastic V-DIP
Nominal Dimensions
Lead Pitch (mm) 1.27
Counts
Plastic
Nominal Dimensions (mil) 1.27 0.889
Lead Pitch (mm)
Counts
QUIP
Piggyback
Nominal Dimensions
Lead Pitch (mm) 1.27
Nominal Dimensions
Lead Pitch (mm) 1.27
Counts
1.778 2.54
CHAPTER
THROUGH HOLE PACKAGES
Ceramic
Classificaton Glass sealed Metal sealed
Lead Pitch (mm) 2.54 2.54 1.27 2.54
Counts
Seam weld 1.27 2.54 Heat sink 1.27 2.54 Metal slug 1.27
Plastic
Classificaton Heat sink
Lead Pitch (mm) 2.54 2.54 1.27
Counts
CHAPTER
THROUGH HOLE PACKAGES
List Through Hole Packages
Plastic (Dual In-line Package)
Package Count Nominal Dimensions Outline Drawing Features P8C-100-300A P8C-100-300B, With P8CT-100-300B2 P14C-100-300A, P14C-100-300B1-1 P14C-100-300B2 With Shrink Wide body Semi wide body P14CT-100-300B-1 P14C-70-300B-1 P16C-100-300A, P16C-100-300WA P16C-100-300SA P16C-100-300B-1 With Wide body Wide body Semi wide body P16CT-100-300B-1 P18C-100-300A, P18C-100-300WA P18C-100-300WA1 P18C-100-300SA P18C-100-300B Shrink Semi wide body Wide body Shrink Wide body Shrink Wide body Shrink Semi wide body Wide body Wide body P18C-70-300B-1 P20C-100-300A, P20C-100-300SA P20C-100-300WA P20C-70-300B-1 P22C-100-300WA-1 S22C-70-300B-1 P24C-100-300A-1 P24C-100-300WA S24C-70-300B-1 P28C-100-300SA P28C-100-300WA P32C-100-300WA Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Package Count Nominal Dimensions Outline Drawing Features P14C-100-400A P20C-100-400A, P20C-100-400B P22C-100-400A P22C-100-400B Shrink Shrink Shrink P24C-100-400A1 P28C-100-400-1 P28C-70-400A-1 S28C-70-400B-1 S30C-70-400B-1 P24C-100-600 P24C-100-600A2 P28C-100-600A1-1 P28C-100-600A2 P28C-100-600B P32C-100-600A P36CZ-100-600A P40C-100-600A-1 P40C-100-600A1 Shrink Shrink Shrink Shrink Shrink P40C-70-600A-1 P42C-100-600A, P42C-70-600A-1 P42C-70-600B P48C-100-600A-1 P48C-70-600B-1 P64C-70-750A, Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Package Classification Cerdip Count Nominal Dimensions Outline Drawing Features P8DH-100-300A, P14DH-100-300A1, P14DH-100-300A2 Semi wide body Wide body P16DH-100-300A1-1 P16DH-100-300A2 P16DH-100-300A3 P16DH-100-300A4, P16DH-100-300A5 P18DH-100-300A P20DH-100-300A P24DH-100-300A P22DH-100-400A P24DH-100-400A P28DH-100-400A P24DH-100-600A1 P24DH-100-600A2 Wide body Seam Weld P28DH-100-600A P28DH-100-600WA P40DH-100-600A P14D-100-300A P14D-100-300B P16D-100-300A1 P16D-100-300A2 P16D-100-300A3 Wide body P16D-100-300A4 P18D-100-300A1 P18D-100-300A2 P20D-100-300A P22D-100-300A P22D-100-400A, P24D-100-400A P28D-100-400A P24D-100-600A-1 P28D-100-600A1-1 P28D-100-600A2 P40D-100-600A Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Package Classification Seam Weld Count Nominal Dimensions Shrink Shrink Shrink Outline Drawing Features P42D-100-600A-1 P42D-70-600B P48D-100-600A-1 P48D-70-600B P64D-70-750A-1 P64D-70-750A1 Window Wide body P24DW-100-300A P24DW-100-600A P28DW-100-600A P28DW-100-600WA P28DW-100-600WA1 Wide body P32DW-100-600WA P32DW-100-600WA1-1 P32DW-100-600WA2-1 P32DW-100-600WA3-2 Wide body P40DW-100-600A P40DW-100-600WA P40DW-100-600WA1 P40DW-100-600WA2 P40DW-100-600WA3 Shrink Wide body Shrink P42DW-70-600A P42DW-100-600WA P64DW-70-750A P64DW-70-750A1 Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Single In-line Package)
Package Count SP-8 Outline Drawing Features P2J-254B P3J-127B P3H-170B-1 P3HP-230B P3HP-254B MP-45G Slim Power Slim Power Slim Power Power P3HF-254B-1 P4HP-200B P5HP-150B P7HA-254B-1 P7HP-254B-1 P8HA-254B-1 P8HP-254B-1 P9HA-254B-1 P9HP-254B-2 P10HP-254B1-1 P10HP-254B2 Power P12HP-254B1 P12HP-254B2-1 TO-126 equivalent TO-126 equivalent TO-126 equivalent TO-220 equivalent TO-92 equivalent TO-92 equivalent Remarks Page
Plastic-V-DIP (Vertical Dual In-line Package)
Package Count Outline Drawing Features P5VP-340B4-1 P5VP-340B3-2 Power P14VP-340B-1 P15VP-254B-1 Power P15VP-400B Horizontal mount type Vertical mount type Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Zig-zag In-line Package)
Package Count Outline Drawing Features P16V-254A-2 P19V-254B-2 P20V-254A-2 P20V-254-400A-1 P24V-254-400A-2 P24V-100-475A P28V-254-400A P40V-100-475A P40VF-70-475A Shrink Remarks Page
QUIP (Quad In-line Package)
Package Count Outline Drawing Features Forming (Plastic) Straight (Plastic) Window (Ceramic) P64GQ-100-36 P64GQ-100-37-1 P64RQ-100-A Remarks Page
Piggyback
Package Count Outline Drawing Features (Ceramic) (Ceramic) QUIP (Ceramic) Shrink (Ceramic) P40E-100-A-1 P42E-100-A-1 P64EQ-100-A-1 P64E-70-A-1 Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Package Classification Glass Sealed Count Outline Drawing Features X68RH-100A X68RH-100A1 Window With Chip Capacity X68RW-100A-1 X72RH-100A1 X84RH-100A X84RH-100A1 X132RH-100A X132RH-100A1 Metal Sealed With Chip Capacity X176RH-100A X208RH-100A X175RH-100A-1 X175RH-100A1-1 X175RH-100A2-1 X175RJ-100A Seam Weld X179RJ-100A X447RG-50A-2 X68R-100A-1 X68R-100A1 X72R-100A-1 X72R-100A1 X132R-100A-1 X132R-100A1 X144R-100A X176R-100A-1 X176R-100A1 X179R-100A X179RJ-100A1 X208R-100A-1 X208R-100A1-1 X208R-100A2 X280R-100A-1 X364R-100A X447RJ-50A X528R-50A1 Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Package Classification Heat Sink Count Outline Drawing Features X72RF-100A X132RF-100A1 X132RF-100A2 X132RF-100A3 X132RF-100A4 X132RF-100A5 X132RF-100A6 X132RF-100A7 X176RF-100A X179RF-100A-1 X208RF-100A1 X208RF-100A2 X208RF-100A3 X208RF-100A4 X208RF-100A5 X208RF-100A6 X208RF-100A7 X280RF-100A-1 X280RF-100A1 X280RF-100A2 X280RF-100A3 X280RF-100A4 X280RF-100A5 Metal Slug X364RF-100A X447RF-50A-1 X179RP-100A X447RP-50A Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Package Count Outline Drawing Features X72S-100A X72SA-100A Heat Sink X72SF-100A X84S-100A X84SA-100A X120S-100A X120SA-100A X132S-100A X132SA-100A Heat Sink X132SF-100A-1 X175S-100A X175S-100A1 Heat Sink Heat Sink Heat Sink X176S-100A-1 X208S-100A X208SF-100A X280SF-100A X447SF-100A Remarks Page
CHAPTER
THROUGH HOLE PACKAGES
Dimensions Through Hole Packages
Plastic (Dual In-line Package)
Unit: (300 mil) 0.48
EIAJ CODE CODE (300 mil) 0.48
SC-504-8A* P8C-100-300A
10.16 MAX. 4.31 MAX.
5.08 MAX.
7.62
MIN.
0.51 MIN. 3.2±0.3 MIN. 0.50±0.10
2.54 1.27 MAX. 0.25+0.10 -0.05 0~15°
0.25
EIAJ CODE CODE (300 mil) 0.82
SC-504-8A* P8C-100-300B,
EIAJ CODE CODE P8CT-100-300B2
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (300 mil) 0.93
Plastic
V-DIP
EIAJ CODE CODE (300 mil) 0.93 SC-501-14A* P14C-100-300A, QUIP Piggyback
20.32 MAX. 4.31 MAX.
5.08 MAX.
7.62
0.51 MIN. 3.6-0.3 MIN. 0.50-0.10 0.25
2.54 2.54 MAX. 0.25+0.10 -0.05
EIAJ CODE CODE (300 mil) 0.93
SC-501-14A* P14C-100-300B1-1
EIAJ CODE CODE
SC-501-14A* P14C-100-300B2
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: with (300 mil)
20.32 MAX. 24.60 MAX.
7.62
4.31 MAX.
5.08 MAX.
0.51 MIN. 3.4-0.3
2.54 2.54 MAX. MIN. 4.74 0.50±0.10 0.25
0.30+0.10 -0.05 4.40±0.5
0~15°
EIAJ CODE CODE Shrink (300 mil)
P14CT-100-300B-1
16.01 MAX.
7.62 4.31 MAX.
5.08 MAX.
0.51 MIN. 3.2±0.3 0.85 MIN. 0.50±0.10 0.17
1.778 2.67 MAX. 0.25+0.10 -0.05 0~15°
EIAJ CODE CODE (300 mil)
SC-542-14* P14C-70-300B-1
EIAJ CODE CODE
SC-503-16A* P16C-100-300A,
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (300 mil)
Plastic
V-DIP
EIAJ CODE CODE (300 mil) SC-503-16A* P16C-100-300WA QUIP Piggyback
EIAJ CODE CODE (300 mil)
SC-503-16A* P16C-100-300SA
20.32 MAX.
4.31 MAX.
7.62 MIN.
5.08 MAX.
0.51MIN.
3.5-0.3
MIN. 0.50-0.10 0.25 2.54 1.27 MAX.
0.25 +0.10 -0.05
0~15°
EIAJ CODE CODE
SC-503-16A* P16C-100-300B-1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: with (300 mil)
20.32 MAX. 24.60 MAX.
7.62 4.31 MAX.
5.08 MAX.
MIN.
0.51 MIN. 3.4±0.3 MIN.
2.54 1.27 MAX. 3.17±0.50 4.12 0.50±0.10 0.25
0.30+0.10 -0.05
0~15°
EIAJ CODE CODE P16CT-100-300B-1
(300 mil)
22.86 MAX. 4.31 MAX.
7.62
MIN.
5.08 MAX.
0.51 MIN. 3.5-0.3
2.54 MIN. 0.50-0.10 0.25
1.27 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE CODE (300 mil)
SC-505-18A* P18C-100-300A,C-1
EIAJ CODE CODE
SC-505-18A* P18C-100-300WA
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (300 mil)
Plastic
V-DIP
EIAJ CODE SC-505-18A* CODE P18C-100-300WA1 (300 mil) QUIP Piggyback
EIAJ CODE CODE (300 mil)
SC-505-18A* P18C-100-300SA
EIAJ CODE CODE
SC-505-18A* P18C-100-300B
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: Shrink (300 mil) 0.93
19.57 MAX. 4.31 MAX.
5.08 MAX.
7.62
0.51 MIN. 3.2-0.3
1.778 0.85 MIN. 0.50-0.10 0.17
2.67 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE CODE (300 mil)
SC-544-18* P18C-70-300B-1
25.40 MAX. 4.31 MAX.
7.62
MIN.
5.08 MAX.
0.51 MIN. 3.5-0.3
MIN. 0.50-0.10 0.25
2.54 1.27 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE CODE (300 mil)
SC-541-20A* P20C-100-300A,
25.40 MAX.
4.31 MAX.
7.62 MIN.
3.2±0.3 5.08 MAX.
0.51 MIN.
MIN. 0.50 ±0.10 0.25
2.54 1.27 MAX. 0.25 +0.10 -0.05
0~15°
EIAJ CODE CODE
SC-541-20A* P20C-100-300SA
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (300 mil)
Plastic
V-DIP
EIAJ CODE CODE Shrink (300 mil) 0.95
SC-541-20A* P20C-100-300WA
QUIP Piggyback
19.57 MAX. 4.31 MAX.
7.62
5.08 MAX.
0.51 MIN. 3.2±0.3 0.85 MIN. 0.50±0.10 0.17
1.778 1.78 MAX. 0.25+0.10 -0.05 0~15°
EIAJ CODE CODE (300 mil)
SC-545-20* P20C-70-300B-1
27.94 MAX.
7.62 4.31 MAX. MIN. 7.35
5.08 MAX.
0.51 MIN. 3.2±0.3
MIN. 0.50±0.10 0.25
2.54 1.27 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE CODE
SC-554-22B* P22C-100-300WA-1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: Shrink (300 mil)
23.12 MAX.
4.31 MAX.
7.62
5.08 MAX. 0.51 MIN. 3.2-0.3
0.85 MIN. 0.50-0.10 0.17 1.778 2.67 MAX.
0.25 +0.10 0.05
0~15°
EIAJ CODE CODE (300 mil)
SC-546-22* S22C-70-300B-1
33.02 MAX.
7.62
4.31 MAX.
MIN.
5.08 MAX.
0.51 MIN. 3.5-0.3
MIN. 0.50-0.10 0.25
2.54 2.54 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE CODE (300 mil)
SC-555-24B* P24C-100-300A-1
EIAJ CODE CODE
SC-555-24B* P24C-100-300WA
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: Shrink (300 mil)
Plastic
4.31 MAX.
23.12 MAX. 7.62
V-DIP
5.08 MAX.
3.2-0.3 0.51 MIN.
0.85 MIN. 0.50-0.10 0.17
1.778 1.78 MAX. 0.25 +0.10 -0.05
0~15°
SC-547-24* S24C-70-300B-1 QUIP Piggyback
EIAJ CODE CODE (300 mil)
EIAJ CODE CODE (300 mil) P28C-100-300SA
EIAJ CODE CODE P28C-100-300WA
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (300 mil)
EIAJ CODE CODE (400 mil) P32C-100-300WA
EIAJ CODE CODE (400 mil) P14C-100-400A
EIAJ CODE CODE
SC-506-20C* P20C-100-400A,
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (400 mil)
Plastic
V-DIP
EIAJ CODE CODE (400 mil) SC-506-20C* P20C-100-400B QUIP Piggyback
EIAJ CODE CODE (400 mil)
SC-502-22E* P22C-100-400A
EIAJ CODE CODE
SC-502-22E* P22C-100-400B
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (400 mil)
EIAJ CODE CODE (400 mil)
SC-507-24A* P24C-100-400A1
35.56 MAX.
10.16
4.31 MAX.
MIN.
5.72 MAX.
0.51 MIN. 3.5-0.3
MIN. 0.50-0.10 0.25
2.54 1.27 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE Shrink (400 mil) CODE
SC-508-28A* P28C-100-400-1
28.46 MAX.
10.16
4.31 MAX.
5.08 MAX.
0.51 MIN. 3.2-0.3
MIN. 0.50-0.10 0.17
1.778 2.67 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE CODE
SC-548-28B* P28C-70-400A-1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: Shrink (400 mil)
Plastic
28.46 MAX.
4.31 MAX.
10.16
5.08 MAX.
V-DIP
0.51MIN.
0.85 MIN. 0.50-0.10 0.17
3.2-0.3
1.778 2.67 MAX.
0.25+0.10 -0.05
0~15°
EIAJ CODE CODE Shrink (400 mil)
SC-548-28B* S28C-70-400B-1
QUIP Piggyback
28.46 MAX.
10.16 4.31 MAX.
5.08 MAX.
0.51 MIN. 3.2-0.3
0.85 MIN. 0.50-0.10 0.17
1.778 0.25+0.10 -0.05 1.78 MAX.
0~15°
EIAJ CODE CODE (600 mil)
SC-549-30* S30C-70-400B-1
EIAJ CODE CODE
SC-509-24E* P24C-100-600
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (600 mil)
EIAJ CODE CODE (600 mil)
SC-509-24E* P24C-100-600A2
38.10 MAX.
4.31 MAX.
15.24 13.2
5.72 MAX.
0.51MIN.
3.6-0.3
MIN. 0.50-0.10 0.25
2.54 2.54 MAX.
0.25 +0.10 -0.05
0~15°
EIAJ CODE CODE
SC-510-28E* P28C-100-600A1-1
(600 mil)
EIAJ CODE CODE
SC-510-28E* P28C-100-600A2
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (600 mil)
Plastic
V-DIP
EIAJ CODE CODE (600 mil) SC-510-28E* P28C-100-600B QUIP Piggyback
EIAJ CODE CODE (600 mil)
P32C-100-600A
45.58 MAX.
15.24 MIN. 13.2
3.2±0.2
0.35 MIN.
MAX. 4.15 MAX.
MIN. 0.50±0.10
0.25 2.54 0.25+0.10 -0.05 MAX. 0~15°
EIAJ CODE CODE P36CZ-100-600A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (600 mil)
53.34 MAX. 4.31 MAX. 5.72 MAX.
15.24 13.2
0.51 MIN. 3.6-0.3 MIN. 0.50-0.10 0.25
2.54
0.25+0.10 -0.05
0~15°
2.54 MAX.
EIAJ CODE CODE (600 mil)
SC-511-40E* P40C-100-600A-1
EIAJ CODE CODE Shrink (600 mil)
SC-511-40E* P40C-100-600A1
39.13 MAX. 4.31 MAX.
15.24 13.2
5.08 MAX.
0.51 MIN. 3.2-0.3 MIN. 0.50-0.10 0.17
1.778
0.25+0.10 -0.05
0~15°
2.67 MAX.
EIAJ CODE CODE
SC-550-40* P40C-70-600A-1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (600 mil)
Plastic
55.88 MAX. 4.31 MAX.
5.72 MAX.
15.24 13.2
V-DIP
0.51 MIN. 3.6-0.3 MIN. 0.50-0.10 0.25
0.25+0.10 -0.05 2.54 2.54 MAX.
0~15°
SC-512-42E* P42C-100-600A, QUIP Piggyback
EIAJ CODE CODE Shrink (600 mil)
39.13 MAX.
4.31 MAX.
15.24 13.2
3.2-0.3
5.08 MAX. 0.51 MIN.
MIN. 0.50-0.10 0.17
1.778 1.78 MAX. 0.25+0.10 -0.05
0~15°
EIAJ CODE CODE Shrink (600 mil)
SC-551-42* P42C-70-600A-1
EIAJ CODE CODE
SC-551-42* P42C-70-600B
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Dual In-line Package)
Unit: (600 mil)
63.50 MAX. 4.31 MAX.
5.72 MAX.
15.24 13.8
0.51 MIN. 3.6-0.3 MIN. 0.50-0.10 2.54 0.25
0.25+0.10 -0.05
0~15°
2.54 MAX.
EIAJ CODE CODE Shrink (600 mil) P48C-100-600A-1
44.46 MAX. 4.31 MAX.
5.72 MAX.
15.24 13.2
0.51 MIN. 3.2-0.3 0.85 MIN. 0.50-0.10 1.778 0.17
0.25+0.10 -0.05
0~15°
1.78 MAX.
EIAJ CODE CODE Shrink (750 mil)
SC-552-48* P48C-70-600B-1
58.68 MAX.
4.31 MAX.
19.05 17.0
5.08 MAX.
0.51 MIN.
3.2-0.3
MIN. 0.50-0.10 0.17
0.25+0.10 -0.05 1.778 1.78 MAX.
0~15°
EIAJ CODE CODE
SC-553-64A* P64C-70-750A,
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
Ceramic
7.62
3.80
10.16 MAX.
5.08 MAX.
V-DIP
0.89 MIN.
6.30
0.51 MIN.
3.0-0.3
1.42 MIN. 2.54 1.27 MAX. 0.46-0.05 0.25
0.25-0.05
0~15°
EIAJ CODE CODE P8DH-100-300A,
QUIP Piggyback
(300 mil)
20.32 MAX.
7.62
5.08 MAX.
0.51 MIN.
3.0-0.3
3.80
6.30
1.42 MIN. 2.54 2.54 MAX. 0.46-0.05 0.25
0.25-0.05
0~15°
EIAJ CODE CODE P14DH-100-300A1, (300 mil)
EIAJ CODE CODE P14DH-100-300A2
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
20.32 MAX.
5.08 MAX.
7.62
3.70
0.89 MIN.
6.75
0.51 MIN.
3.0-0.3
1.42 MIN. 0.46-0.05
2.54 1.27 MAX. 0.25
0.25-0.05
0~15°
EIAJ CODE CODE (300 mil) P16DH-100-300A1-1
EIAJ CODE CODE (300 mil) P16DH-100-300A2
EIAJ CODE CODE P16DH-100-300A3
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
Ceramic
V-DIP
EIAJ CODE CODE P16DH-100-300A4, (300 mil) QUIP Piggyback
EIAJ CODE CODE (300 mil) P16DH-100-300A5
EIAJ CODE CODE P18DH-100-300A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
EIAJ CODE CODE (300 mil) P20DH-100-300A
EIAJ CODE CODE (400 mil) P24DH-100-300A
EIAJ CODE CODE P22DH-100-400A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (400 mil)
Ceramic
V-DIP
EIAJ CODE CODE (400 mil) P24DH-100-400A QUIP Piggyback
EIAJ CODE CODE (600 mil) P28DH-100-400A
EIAJ CODE CODE P24DH-100-600A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil)
EIAJ CODE CODE (600 mil) P24DH-100-600A2
EIAJ CODE CODE (600 mil) P28DH-100-600A
EIAJ CODE CODE P28DH-100-600WA
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil)
Ceramic
V-DIP
EIAJ CODE CODE P40DH-100-600A QUIP Piggyback
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
EIAJ CODE CODE (300 mil) P14D-100-300A
EIAJ CODE CODE (300 mil) P14D-100-300B
EIAJ CODE CODE P16D-100-300A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
Ceramic
V-DIP
EIAJ CODE CODE (300 mil) P16D-100-300A2 QUIP Piggyback
EIAJ CODE CODE (300 mil) P16D-100-300A3
EIAJ CODE CODE P16D-100-300A4
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
EIAJ CODE CODE (300 mil) P18D-100-300A1
EIAJ CODE CODE (300 mil) P18D-100-300A2
EIAJ CODE CODE P20D-100-300A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil)
Ceramic
V-DIP
EIAJ CODE CODE (400 mil) P22D-100-300A QUIP Piggyback
EIAJ CODE CODE (400 mil) P22D-100-400A,
EIAJ CODE CODE P24D-100-400A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (400 mil)
34.77 MAX.
4.18 MAX.
10.16
2.74
1.03 MIN.
9.80
0.51 MIN.
1.25 MIN. 0.46 0.05 0.25
1.02 MAX.
0.25 0.05
0~15°
2.54
EIAJ CODE CODE (600 mil)
P28D-100-400A
33.02 MAX.
4.57 MAX.
15.24
2.64
14.93
MIN.
3.5-0.3
0.92 MIN. 0.46-0.05 0.25
2.54 2.54 MAX.
0.25-0.05
0~15°
EIAJ CODE CODE (600 mil)
P24D-100-600A-1
38.10 MAX.
4.57 MAX.
15.24
2.64
14.93
MIN.
3.5-0.3
0.92 MIN. 0.46-0.05 0.25
2.54 2.54 MAX. 0.25-0.05 0~15°
EIAJ CODE CODE P28D-100-600A1-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil)
Ceramic
V-DIP
EIAJ CODE CODE (600 mil) P28D-100-600A2 QUIP Piggyback
EIAJ CODE CODE (600 mil) P40D-100-600A
4.57 MAX.
55.88 MAX. 15.24 14.93
MIN.
3.5-0.3
2.64
0.92 MIN. 0.46-0.05 0.25
2.54 2.54 MAX. 0.25-0.05 0~15°
EIAJ CODE CODE P42D-100-600A-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: Shrink (600 mil)
EIAJ CODE CODE (600 mil) P42D-70-600B
4.57 MAX.
63.50 MAX. 15.24 14.93
MIN.
3.5-0.3
2.74
0.92 MIN. 0.46-0.05 0.25
2.54 2.54 MAX. 0.25±0.05 0~15°
EIAJ CODE CODE Shrink (600 mil) P48D-100-600A-1
EIAJ CODE CODE P48D-70-600B
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: Shrink (750 mil)
Ceramic
58.68 MAX. 5.08 MAX. 19.05 2.62 18.8
V-DIP
MIN.
3.5-0.3
MIN. 0.46-0.05 0.25
1.778 1.78 MAX. 0.25-0.05 0~15°
EIAJ CODE CODE Shrink (750 mil)
QUIP Piggyback P64D-70-750A-1
58.16 MAX.
5.08 MAX.
19.05
3.14
18.8
3.5-0.3
1.02 MIN.
MIN. 0.46-0.05
0.25
1.521 1.778 MAX.
0.25-0.05
0~15°
EIAJ CODE CODE P64D-70-750A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (300 mil) (Window)
EIAJ CODE CODE (600 mil) (Window) P24DW-100-300A
EIAJ CODE CODE (600 mil) (Window) P24DW-100-600A
EIAJ CODE CODE P28DW-100-600A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil) (Window)
Ceramic
V-DIP
EIAJ CODE CODE (600 mil) (Window) P28DW-100-600WA QUIP Piggyback
EIAJ CODE CODE (600 mil) (Window) P28DW-100-600WA1
EIAJ CODE CODE P32DW-100-600WA
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil) (Window)
EIAJ CODE CODE P32DW-100-600WA1-1 (600 mil) (Window)
EIAJ CODE CODE P32DW-100-600WA2-1 (600 mil) (Window)
EIAJ CODE CODE P32DW-100-600WA3-2
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil) (Window)
Ceramic
V-DIP
EIAJ CODE CODE (600 mil) (Window) P40DW-100-600A QUIP Piggyback
EIAJ CODE CODE (600 mil) (Window) P40DW-100-600WA
EIAJ CODE CODE P40DW-100-600WA1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil) (Window)
EIAJ CODE CODE (600 mil) (Window) P40DW-100-600WA2
18.0
4-R2.0 53.34 MAX.
15.24
5.08 MAX.
14.66
3.5-0.3
0.51 MIN.
3.80
1.20 MIN. 0.50-0.10
0.25
2.54 2.54 MAX.
0.25-0.05
0~15°
EIAJ CODE CODE (600 mil) (Window)
12.0
P40DW-100-600WA3
38.25 MAX. 4-R3.0
5.282 MAX. 3.026
15.24 14.99
1.02 MIN.
0.85 MIN. 0.46- 0.05
0.25
1.345 1.778 MAX.
0.25- 0.05
0°~15°
EIAJ CODE CODE P42DW-70-600A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Dual In-line Package)
Unit: (600 mil) (Window)
19.0
Ceramic
4-R2.0 3.5-0.3 5.08 MAX. 55.88 MAX.
15.24 14.66
V-DIP
0.51 MIN.
3.80
1.20 MIN. 0.46-0.05 0.25
0.25- 0.05 2.54 2.54 MAX.
0~15°
EIAJ CODE CODE P42DW-100-600WA
QUIP Piggyback
(600 mil) (Window)
EIAJ CODE CODE (750 mil) (Window) P64DW-70-750A
EIAJ CODE CODE P64DW-70-750A1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Single In-line Package)
Unit: 0.29
EIAJ CODE CODE P2J-254B 0.69
EIAJ CODE CODE P3J-127B
EIAJ CODE CODE P3H-170B-1
EIAJ CODE CODE P3HP-230B
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Single In-line Package)
Unit:
V-DIP
QUIP Piggyback
EIAJ CODE CODE 0.71 P3HP-254B
EIAJ CODE CODE P3HF-254B-1
EIAJ CODE CODE P4HP-200B
EIAJ CODE CODE P5HP-150B
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Single In-line Package)
Unit: slim 0.51 power
20.32 MAX.
20.32 MAX.
2.8±0.2
15.0-0.1
3.8-0.2
5.08 MAX.
5.75 MAX.
13.8 MAX.
3.2±0.5
0.51 MIN.
8.2-0.3
0.50±0.10
0.25
2.54 MAX.
MAX.
MIN. 0.80-0.10 0.25
6.5-0.7
MIN.
2.54
0.25+0.10 -0.05
MIN.
2.54 2.54 MAX.
0.35-0.10 MAX.
EIAJ CODE CODE slim 0.47 P7HA-254B-1 power
EIAJ CODE CODE P7HP-254B-1
20.32 MAX.
3.5-0.2
3.6-0.1
1.3-0.1
20.32 MAX.
2.8-0.2
5.08 MAX.
5.75 MAX.
11.9-0.3
3.2-0.5
0.51 MIN.
MIN.
MIN. 0.50-0.10 MIN. 0.25
2.54 1.27 MAX.
0.25+0.10 -0.05 MAX.
MIN. 0.75-0.10 0.85 MIN. 0.25
6.5-0.7
15.0 MAX.
2.54 1.27 MAX.
0.40-0.10 MAX.
EIAJ CODE CODE P8HA-254B-1
EIAJ CODE CODE P8HP-254B-1
15.0 MAX.
3.6-0.1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Single In-line Package)
Unit: slim 0.59 power
22.86 MAX. 2.8-0.2
25.4 MAX. 21.4
5.08 MAX. 5.75 MAX.
3.5-0.2
0.6-0.1
12.0
3.6-0.1
V-DIP
13.5 MAX. 11.7-0.3 15.2 MAX.
3.2-0.5
0.51 MIN.
MIN. 0.50-0.10 MIN. 0.25
2.54 1.27 MAX.
0.25+0.10 -0.05 MAX.
QUIP Piggyback
4.8-0.7 MIN.
MIN. 0.75-0.10 0.25
2.54 2.54 MAX.
0.65-0.10 MAX.
EIAJ CODE CODE power P9HA-254B-1 power
EIAJ CODE CODE P9HP-254B-2
26.86 MAX. 25.0 12.0-0.1 4.0-0.2
3.5-0.1
0.45-0.1
12.0-0.3
6.0-0.7 MIN.
MIN. 0.55-0.10 0.25
2.54 MAX.
0.50-0.10 1.85 MAX.
EIAJ CODE CODE P10HP-254B1-1
15.2 MAX.
EIAJ CODE CODE P10HP-254B2
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Single In-line Package)
Unit: power power
33.02 MAX. 24.0-0.1 4.8-0.2
13.8 MAX.
8.2-0.3
6.5-0.7
MIN.
MIN. 0.80-0.10 0.25
2.54 2.54 MAX.
0.35-0.10 MAX.
EIAJ CODE CODE P12HP-254B1
EIAJ CODE CODE P12HP-254B2-1
15.0 MAX.
3.6-0.1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Zig-zag In-line Package)
Unit: (325 mil) 0.81
21.59 MAX.
2.8-0.2
MAX.
0.51 MIN.
3.3-0.7
0.50-0.10
0.25
2.54
1.27 MAX. 1.27
MAX.
0.25+0.10 -0.05 2.54
EIAJ CODE CODE (350 mil)
SC-557-16A* P16V-254A-2
25.4 MAX.
3.0-0.2
MAX.
3.3-0.7
MIN.
0.50-0.10
0.25
2.54
1.27 MAX. 1.27
MAX.
0.35+0.10 -0.05 2.54
EIAJ CODE CODE (325 mil)
26.67 MAX. 2.8-0.2
P19V-254B-2
MAX.
MIN.
3.3-0.7
0.50-0.10
0.25
2.54
1.27 MAX. 1.27
EIAJ CODE CODE
MAX.
0.25+0.10 -0.05 2.54
SC-557-20A* P20V-254A-2
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Zig-zag In-line Package)
Unit: (400 mil)
V-DIP
EIAJ CODE CODE (400 mil) SC-558-20A P20V-254-400A-1 QUIP Piggyback
31.75 MAX. 2.8-0.2
MAX.
MIN.
3.3-0.5
0.50-0.10
0.25
2.54
1.27 MAX. 1.27
10.16 MAX.
0.25+0.10 -0.05 2.54
EIAJ CODE CODE (475 mil)
SC-558-24A P24V-254-400A-2
EIAJ CODE CODE P24V-100-475A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Zig-zag In-line Package)
Unit: (400 mil)
EIAJ CODE CODE (475 mil)
SC-558-28A P28V-254-400A
EIAJ CODE CODE Shrink (475 mil)
36.22 MAX. 2.2±0.1
P40V-100-475A
10.45 MAX. 3.16±0.2 MIN.
0.25+0.10 -0.05 0.85 MAX. 0.40±0.10 0.25
1.778 0.889
1.778
EIAJ CODE CODE P40VF-70-475A
12.0 MAX.
2°~6°
CHAPTER
THROUGH HOLE PACKAGES
QUIP (Quad In-line Package)
Unit: plastic QUIP
V-DIP
EIAJ CODE CODE plastic QUIP (Straight) P64GQ-100-36 QUIP Piggyback
EIAJ CODE CODE Ceramic QUIP (Window) P64GQ-100-37-1
EIAJ CODE CODE P64RQ-100-A
CHAPTER
THROUGH HOLE PACKAGES
Piggyback
Unit: Ceramic Piggyback
EIAJ CODE CODE Ceramic Piggyback P40E-100-A-1
EIAJ CODE CODE Ceramic Piggyback P42E-100-A-1
EIAJ CODE CODE P64EQ-100-A-1
CHAPTER
THROUGH HOLE PACKAGES
Piggyback
Unit: Ceramic Piggyback
V-DIP
EIAJ CODE CODE P64E-70-A-1 QUIP Piggyback
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Glass Sealed)
EIAJ CODE CODE Ceramic (Glass Sealed) X68RH-100A
EIAJ CODE CODE X68RH-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Window) (Glass Sealed)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Glass Sealed) X68RW-100A-1
EIAJ CODE CODE X72RH-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Glass Sealed)
EIAJ CODE CODE Ceramic (Glass Sealed) X84RH-100A
30.48±0.3
3.24
21.5
1.25
30.48±0.3 21.5
Index mark
4.76 MAX. 2.54±0.22
Index mark
3.3±0.35
1.02 MIN.
1.27±0.13 0.46±0.05
0.254
1.27 2.54
EIAJ CODE CODE X84RH-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Glass Sealed)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Glass Sealed) X132RH-100A
EIAJ CODE CODE X132RH-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Glass Sealed)
EIAJ CODE CODE Ceramic (Glass Sealed) X176RH-100A
EIAJ CODE CODE X208RH-100A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Metal Sealed)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Metal Sealed) X175RH-100A-1
40.0-0.4 1.25 17.27
Index mark
5.60 MAX. 3.60
1.27-0.13 0.46-0.05
0.55 MIN. 3.3-0.18
2.54
2.22
0.254
40.0-0.4
17.27
EIAJ CODE CODE X175RH-100A1-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Metal Sealed)
40.0-0.4 2.56 24.38
1.25
40.0-0.4 24.38
Index mark
5.60 MAX. 3.60
1.27-0.13 0.46-0.05
0.55 MIN. 3.3-0.18
2.54
2.22
0.254
EIAJ CODE CODE Ceramic (Metal Sealed)
40.0-0.41
X175RH-100A2-1
2.56
24.38 PNML
Index mark
MAX.
0.55 MIN.
3.3-0.18
3.55
1.27-0.13
2.54
2.22
0.46-0.05
0.254
40.0-0.41
24.38
EIAJ CODE CODE X175RJ-100A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Metal Sealed)
47.24- 0.47
1.60 MIN.
26.92 33.92
V-DIP
QUIP Piggyback
1.08 MAX. 1.54MAX.
Index mark
5.60 MAX.
47.24- 0.47
36.46
29.46
Ceramic
0.635 MIN.
3.33
3.3-
1.27- 0.46 0.05
0.254
2.03 2.54
EIAJ CODE CODE Ceramic (Metal Sealed) X179RJ-100A
52.32- 0.52
1.60 MIN.
26.92
33.72
6.19 MAX.
Index mark
4.34
0.635 MIN.
0.42 MAX.
3.3-
1.27- 0.46 0.05 0.254
2.54
1.54 MAX.
1.27 2.03
52.32- 0.52
36.26
29.46
EIAJ CODE CODE X447RG-50A-2
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
EIAJ CODE CODE Ceramic (Seam Weld) X68R-100A-1
EIAJ CODE CODE X68R-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
27.94-0.4
Index mark Orientation
V-DIP
QUIP Piggyback
4.57 MAX.
27.94-0.4
Ceramic
MIN.
2.8-
1.2- 0.46-0.05
2.54
1.25
EIAJ CODE CODE X72R-100A-1
Ceramic (Seam Weld)
27.9±0.3
Index mark
4.02 MAX. 2.81
27.9±0.3
Orientation
2.8±0.3 MIN.
1.2±
2.54
1.25
0.46 0.05
0.254
EIAJ CODE CODE X72R-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
35.56-0.3
Index mark
4.57 MAX.
35.56-0.3
Orientation
2.95 MIN.
2.8-0.3
1.2-0.2 0.46-0.05 0.254
2.54
1.27
EIAJ CODE CODE Ceramic (Seam Weld) X132R-100A-1
EIAJ CODE CODE X132R-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Seam Weld)
38.1-
Index mark Orientation
X144R-100A
4.57 MAX.
2.8-
MIN.
2.81
1.2- 0.46 0.05
2.54
1.27
38.1-
EIAJ CODE CODE X176R-100A-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
38.1- 0.35
2.8- MIN.
4.67 MAX. 3.11
Index mark
38.1- 0.35
Orientation
1.2- 0.46 0.05
0.254
1.27 2.54
EIAJ CODE CODE Ceramic (Seam Weld)
47.24- 0.47
X176R-100A1
33.92
Index mark
5.62 MAX.
1.17 MIN.
3.3-
1.27- 0.46 0.05
1.50 MAX.
3.22
47.24- 0.47
36.46
0.254
2.03 2.54
EIAJ CODE CODE X179R-100A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
47.24- 0.47
1.60 MIN.
26.92 33.92
Index mark
V-DIP
QUIP Piggyback
6.11 MAX.
1.08 MAX.
1.54MAX.
47.24- 0.47
36.46
29.46
0.635 MIN.
3.3-
Ceramic
1.27-
0.46 0.05
2.54
2.03
0.254
EIAJ CODE CODE X179RJ-100A1
Ceramic (Seam Weld)
43.18-
Orientation
Index mark
5.08 MAX.
1.2-0.2 0.46-0.05
MIN. 3.8-
2.54
1.27
43.18-
EIAJ CODE CODE X208R-100A-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
48.26-0.4
Index mark
48.26-0.4
Orientation
4.57 MAX.
MIN.
2.8-0.3
1.2-0.2 0.46-0.05
2.54
1.27
EIAJ CODE CODE Ceramic (Seam Weld) X208R-100A1-1
43.18±0.4 2.04
1.15 1.15
2.31
Index mark
4.90 MAX.
43.18±0.4
Orientation
3.8±0.23
MIN.
3.31
1.2±0.1 0.46±0.05
1.27
0.254
2.54
EIAJ CODE CODE X208R-100A2
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
48.26-0.4
Index mark
V-DIP
QUIP Piggyback
48.26-0.4
Orientation
4.57 MAX.
Ceramic
1.2-0.2 0.46-0.05
MIN.
2.8-0.3
2.54
1.27
EIAJ CODE CODE Ceramic (Seam Weld) X280R-100A-1
43.18±0.45
43.18 ±0.45
Index mark
Orientation
5.08 MAX.
1.016 MIN.
3.17
1.2±0.2 0.46 ±0.05 0.254
2.54
1.27 1.27
±0.2
EIAJ CODE CODE X364R-100A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Seam Weld)
52.32-0.52 1.60 MIN. 26.92
33.72 6.83 MAX. 0.42 MAX. 1.54 MAX. 1.27 2.03 2.54
Index mark
4.46
0.635 MIN.
3.3-0.2
1.27-0.2 0.46-0.05
0.254
52.32-0.52
36.26
29.46
EIAJ CODE CODE Ceramic (Seam Weld) X447RJ-50A
54.86-0.4
Index mark
54.86-0.4
Orientation
3.3-0.3 MIN.
4.41 MAX. 3.29
1.2-0.2 0.46-0.05 0.254
2.54
1.27 2.03
EIAJ CODE CODE X528R-50A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Heat Sink) X72RF-100A
EIAJ CODE CODE X132RF-100A1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
EIAJ CODE CODE Ceramic (Heat Sink) X132RF-100A2
EIAJ CODE CODE X132RF-100A3
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Heat Sink) X132RF-100A4
EIAJ CODE CODE X132RF-100A5
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
EIAJ CODE CODE Ceramic (Heat Sink) X132RF-100A6
EIAJ CODE CODE X132RF-100A7
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Heat Sink) X176RF-100A
47.24- 0.47 44.0
Index mark
23.03 MAX.
0.635 MIN.
2.82
3.3-
1.27- 0.46 0.05
0.254
2.03 2.54
47.24- 0.47
44.0
EIAJ CODE CODE X179RF-100A-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
EIAJ CODE CODE Ceramic (Heat Sink) X208RF-100A1
EIAJ CODE CODE X208RF-100A2
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Heat Sink) X208RF-100A3
EIAJ CODE CODE X208RF-100A4
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
EIAJ CODE CODE Ceramic (Heat Sink) X208RF-100A5
EIAJ CODE CODE X208RF-100A6
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Heat Sink) X208RF-100A7
EIAJ CODE CODE X280RF-100A-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
EIAJ CODE CODE Ceramic (Heat Sink) X280RF-100A1
EIAJ CODE CODE X280RF-100A2
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
V-DIP
QUIP Piggyback
Ceramic
EIAJ CODE CODE Ceramic (Heat Sink) X280RF-100A3
48.26- 0.45 40.33
Index mark
22.2 MAX.
48.26- 0.45
40.33
Orientation
2.8- 0.717 MIN.
1.2- 0.46 0.05
0.254
1.27 2.54
EIAJ CODE CODE X280RF-100A4
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
48.26-0.45 40.39
40.39 48.26-0.45
10.80 MAX.
Index mark
3.45
Orientation
0.635 MIN.
3.3-0.2
1.2-0.1
2.54
1.27
0.46-0.05
0.254
EIAJ CODE CODE Ceramic (Heat Sink) X280RF-100A5
EIAJ CODE CODE X364RF-100A
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Heat Sink)
52.32- 0.52 44.0
52.32- 0.52 44.0
V-DIP
Index mark
24.04 MAX.
QUIP Piggyback
0.635 MIN.
3.07
Ceramic
3.3-
1.27- 0.46 0.05
0.254
1.27 2.03 2.54
EIAJ CODE CODE X447RF-50A-1
CHAPTER
THROUGH HOLE PACKAGES
Ceramic (Pin Grid Array)
Unit: Ceramic (Metal Slug)
47.24-0.47
1.60 MIN.
25.0 15.0 2-10-32UNF 33.92
2-M3
Index mark
10.67 MAX. MIN.
3.38
0.635 MIN.
3.3-0.2
1.27-0.2 0.46-0.05
2.54
2.03
0.254
47.24-0.47
36.46
21.59
29.50
EIAJ CODE CODE Ceramic (Metal Slug) X179RP-100A
52.32- 0.52
1.60 MIN.
25.0 15.0 2-10-32UNF
2-M3 33.72
Index mark
11.69 MAX. MIN.
3.07
0.635 MIN.
3.3-
1.27 2.03
1.27- 0.46 0.05
2.54
0.254
29.50 52.32- 0.52
36.26
21.59
EIAJ CODE CODE X447RP-50A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic
V-DIP
QUIP Piggyback
Plastic
EIAJ CODE CODE Plastic X72S-100A
EIAJ CODE CODE X72SA-100A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic (Heat Sink)
27.94- 27.2
Index mark
MAX.
27.94-
27.2
Orientation
0.25 MIN.
1.92
3.3-
1.2- 0.48 0.05
1.27 2.54
EIAJ CODE CODE Plastic X72SF-100A
30.48±0.4 0.64
2.81
1.25
10.7
MAX.
Index mark
3.3±0.3
MIN.
1.2±0.2 0.48±0.05
1.27 2.54
30.48±0.4
10.7
EIAJ CODE CODE X84S-100A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic
V-DIP
QUIP Piggyback
Plastic
EIAJ CODE CODE Plastic X84SA-100A
EIAJ CODE CODE X120S-100A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic
EIAJ CODE CODE Plastic X120SA-100A
EIAJ CODE CODE X132S-100A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic
V-DIP
QUIP Piggyback
Plastic
EIAJ CODE CODE Plastic X132SA-100A
35.56 33.56
35.56-
33.56
Index mark
Orientation
10.0 MAX. 3.3-
0.25 MIN.
2.12
0.48 0.05
1.27 2.54
EIAJ CODE CODE X132SF-100A-1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic
40.0±0.4 9.21 1.25 15.0
11.38
4.45 MAX.
3.3±0.3
MIN.
2.13
1.2±0.2 0.48±0.05
2.22
2.54
40.0±0.4
12.7
EIAJ CODE CODE Plastic X175S-100A
40.0- 9.21 1.25 12.7
11.38
4.45 MAX.
3.3-
MIN.
2.13
1.2- 0.48 0.05
2.22 2.54
40.0-
15.0
EIAJ CODE CODE X175S-100A1
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic
V-DIP
QUIP Piggyback
Plastic
EIAJ CODE CODE Plastic X176S-100A-1
43.18-
43.18-
MAX.
Orientation
2.32 MIN.
3.0-
1.2- 0.48 0.05
1.27 2.54
EIAJ CODE CODE X208S-100A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic (Heat Sink)
43.18- 33.56 PNML
10.2 MAX.
43.18-
33.56
Orientation
2.32
0.25 MIN.
3.3-
1.2- 0.48 0.05
1.27
2.54
EIAJ CODE CODE Plastic (Heat Sink) X208SF-100A
48.2-0.4 44.2 UTSRQPNMLKJHGFEDCBA Index mark
11.1 MAX.
MIN.
3.2-0.25
1.2-0.2 0.46-0.05
2.54
1.24
48.2-0.4
44.2
EIAJ CODE CODE X280SF-100A
CHAPTER
THROUGH HOLE PACKAGES
Plastic (Pin Grid Array)
Unit: Plastic (Heat Sink)
52.32-0.1 44.2
52.32-0.1 44.2
V-DIP
10.45 MAX.
QUIP Piggyback
Plastic
3.3-0.25 0.85 MIN.
1.2-0.2 0.46-0.05 0.254
1.27 2.03 2.54
EIAJ CODE CODE X447SF-100A
CHAPTER
SURFACE MOUNT PACKAGES
CHAPTER
SURFACE MOUNT PACKAGES
LINEUP SURFACE MOUNT PACKAGES LIST SURFACE MOUNT PACKAGES DIMENSIONS SURFACE MOUNT PACKAGES Plastic (Small Outline Package) Ceramic WSOP (Small Outline Package with Window) Plastic shrink (Shrink Small Outline Package) Plastic TSOP (Thin Small Outline Package) Plastic TSOP (II) (Thin Small Outline Package) Plastic (Quad Flat Package) Plastic (Fine Pitch) (Quad Flat Package) Plastic (Surface Vertical Package) Plastic (Small Outline J-leaded Package)
(10) Plastic (Quad Flat J-leaded Package) (11) Ceramic (Quad Flat Non-leaded Package) (12) Ceramic WQFN (Quad Flat Non-leaded Package with Window) (13) Ceramic (Pin Grid Array) I-lead Type (14) Plastic (Ball Grid Array) Note that outlined dimensioned drawings subject change. Refer latest version data sheet product before employing product. package weight rough estimate.
SSOP TSOP
CHAPTER
SURFACE MOUNT PACKAGES
Lineup Surface Mount Packages
following show lineup Surface Mount Packages products. Available, Plastic
Nominal Dimensions (mil) 1.27 Lead Pitch (mm) Counts
Under development)
Plastic Shrink
Nominal Dimensions (mil) 0.65 0.65 Lead Pitch (mm) Counts
Ceramic WSOP
Nominal Dimensions (mil) Lead Pitch (mm) 1.27
Plastic TSOP
Nominal Dimensions (mm) (mil) 13.4 Lead Pitch (mm) Counts
Plastic TSOP (II)
Nominal Dimensions (mil) Lead Pitch (mm) 1.27 0.65 1.27 Counts
0.55
1.27
CHAPTER
SURFACE MOUNT PACKAGES
Plastic
Nominal Dimensions (mm)
Lead Pitch (mm) 0.65
Counts
0.65 0.65 0.65
0.65
0.65 0.65
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Fine Pitch)
Nominal Dimensions (mm) Lead Pitch Classification (mm) TQFP TQFP TQFP LQFP LQFP LQFP LQFP LQFP: Package height TQFP: Package height LQFP TQFP LQFP LQFP TQFP Counts
QFP: Package height
Plastic
Nominal Dimensions (mm) Lead Pitch (mm) 0.65 Counts
CHAPTER
SURFACE MOUNT PACKAGES
Plastic
Nominal Dimensions (mil) 1.27
Lead Pitch (mm)
Counts
Plastic
Nominal Dimensions (mil) 1150 1150 1.27
Lead Pitch (mm)
Counts
Ceramic
Classificaton
Lead Pitch (mm) 1.016
Counts
Glass sealed
1.27 2.54
Seam weld
1.27
Ceramic WQFN
Classificaton
Lead Pitch (mm) 0.65
Counts
Window 1.27
CHAPTER
SURFACE MOUNT PACKAGES
Ceramic (I-Lead Type)
Classification Seam weld
Lead Pitch (mm)
Counts
1.27 Heat sink
Plastic
Lead Pitch (mm) 1.27 Cavity 1.27 Cavity Down Counts
Classification
CHAPTER
SURFACE MOUNT PACKAGES
List Surface Mount Packages
Plastic (Small Outline Package)
Package height (Unit: Package Counts Nominal Dimensions Outline Drawing Type Features S8GM-50-225B-4 S14GM-50-225B, S16GM-50-225B, P8GM-50-300B-3 P14GM-50-300B-4 P16GM-50-300B-4 P20GM-50-300B, P24GM-50-300B-4 P16GM-50-375A-2 P16GM-50-375B-3 P16GT-50-375B Normal Forming Reverse Forming Thick type P20GM-50-375B-4 P20GT-50-375B-1 P24GM-50-375B-3 P24GT-50-375B-1 P28GM-50-375B-3 P28GT-50-375B-1 P24GM-50-450A-2 P28GM-50-450A1-2 P28GM-50-450A2-2 P28GU-50-450A-1 S32GM-50-525A-2 P40GW-50-525A P44GX-50-600A-1 P44GX-50-600A1-1 2.25 High stand-off Remarks Page
CHAPTER
SURFACE MOUNT PACKAGES
Ceramic WSOP (Small Outline Package) Type Window
Package Counts Nominal Dimensions Outline Drawing Type Features Window P32BW-50-525A-2 P32BW-50-525A1-3 Window (Thin type) P32BW-50-525A2 P32BW-50-525A3 Remarks Page
Plastic Shrink (Shrink Small Outline Package)
Lead pitch (Unit: Package Counts Nominal Dimensions Outline Drawing Type Features 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 P14GM-65-225B-2 P16GM-65-225B-2 P20GR-65-225C-1 P20GM-65-300B-2 P24GS-65-300B-1 P30GS-65-300B-1 P36GM-80-300B-3 P38GS-65-300B-1 S30GT-65-375B P38GT-65-375B S42GT-80-375B-1 P48GT-65-375B-1 P64GW-80-525A-1 Remarks Page
Plastic TSOP (Thin Small Outline Package)
(Unit: Package Counts Nominal Dimensions Outline Drawing Pitch Features Normal Forming Reverse Forming 13.4 0.55 Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming S24GX-50-JJH-1 S24GX-50-JKH-1 P28GW-55-9JL-1 P28GW-55-9KL-1 S32GX-50-EJA-1 S32GX-50-EKA-1 S32GZ-50-KJH-1 S32GZ-50-KKH-1 S40GZ-50-LJH-1 S40GZ-50-LKH-1 S48GY-50-MJH-1 S48GY-50-MKH-1 (20) (20) Remarks Page
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Package Counts Nominal Dimensions Outline Drawing Features Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming Normal Forming Reverse Forming S26GS-50-9JD-2 S26GS-50-9KD-2 S26G3-50-7JD-1 S26G3-50-7KD-1 S26G3-50-7JD1 S26G3-50-7KD1 S26G3-50-9JD S26G3-50-9KD S28G5-50-7JD-2 S28G5-50-7KD-2 S28G5-50-7JD1-1 S28G5-50-7KD1-1 S28G5-50-7JD2-1 S28G5-50-7KD2-1 S28G5-50-7JD3 S28G5-50-7KD3 S28G5-50-7JD4 S28G5-50-7KD4 S28G5-50-7JD5 S28G5-50-7KD5 S32G5-50-7JD-2 S32G5-50-7KD-2 S32G5-50-7JD1-1 S32G5-50-7KD1-1 S32G5-50-7JD2 S32G5-50-7KD2 S44G5-80-7JF-1 S44G5-80-7KF-1 S44G5-80-7JF1-1 S44G5-80-7KF1-1 S44G5-80-7JF2 S44G5-80-7KF2 S44G5-80-7JF3 S44G5-80-7KF3 S44G5-80-7JF4 S44G5-80-7KF4 S44G5-80-7JF5 S44G5-80-7KF5 S50G5-80-7JF-1 S50G5-80-7KF-1 S50G5-80-7JF1 S50G5-80-7KF1 S50G5-80-7JF2 S50G5-80-7KF2 S50G5-80-7JF3 S50G5-80-7KF3 S50G5-80-7JF4 S50G5-80-7KF4 S70G5-65-7JG S70G5-65-7KG S34G7-50-7JD S34G7-50-7KD S54G7-80-7JF S54G7-80-7KF S48G8-80-7JF-1 S48G8-80-7KF-1 (44) (44) (68) (68) (44) (44) (40) (40) (40) (40) (24) (24) (24) (24) (20) (20) (24) (24) (24) (24) (20) (20) Remarks Page
(Lead Chip) Type Stand-off height 0.05 0.05 (mm) Stand-off height 0.05 (mm)
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Quad Flat Package)
Terminal length, Package Height (Unit: Package Counts Pitch Package Size Outline Drawing Features P44G-80-22-2 P44GB-80-3B4-3 S44GB-80-3B4-2 S44GB-80-3BS 0.65 P48GB-65-2A5-3 P48GH-80-2A5-4 P52GC-100-3B6, 3BH-2 S52GC-100-3BH-3 P52GC-100-AB6-3 0.65 S56GB-65-3B7-3 S56GB-65-1A7-3 0.65 LQFP S56GH-80-3B7-1 P64GK-65-8A8-1 P64G-80-22-2 P64GC-80-AB8-3 P64GC-80-3BE-2 S64GC-80-3BE-2 P64GF-100-3B8, 3BE, 3BR-2 S64GF-100-3B8, 3BE-3 0.65 0.65 S68GH-65-2AK-2 S74GJ-100-5BJ-3 S80GC-65-3B9-3 S80GC-65-7ET-2 P80G-80-12-2 P80GF-80-3B9-3 S80GF-80-3B9-3 P80GF-80-3L9-1 0.65 S94GJ-80-5BG-3 P100G-65-12-2 P100GF-65-3BA-3 P100GF-65-3BA1-2 S100GF-65-3BA-3 P100GF-65-3LA-1 LQFP S100GF-65-8ET S100GF-65-JBT P120GD-80-5BB-3 P120GD-80-LBB, MBB-1 2.35 2.35 Remarks Page
CHAPTER
SURFACE MOUNT PACKAGES
Package Counts Pitch 0.65 0.65 Package Size Outline Drawing Features P136GD-65-5BC-3 P160GD-65-5BD-3 P160GD-65-LBD, S160GD-65-LGD, 0.65 0.65 P184GN-65-LGT-1 S208GL-65-6GL-1 Remarks Page
Plastic (Fine Pitch) (Quad Flat Package)
Package height (Unit: Package Counts Pitch Package Size LQFP LQFP LQFP LQFP TQFP TQFP TQFP TQFP TQFP TQFP Outline Drawing Features S48GA-50-2E5-1 S48GA-50-9EU-1 S64GB-50-9EU-1 S72GB-50-2EP-2 P80GK-50-BE9-4 S80GK-50-9EU S88GK-50-3EQ-1 P100GC-50-7EA-2 S100GC-50-9EU-1 S120GC-40-9EV S120GJ-50-3EB-2 S144GJ-50-3EN-2 S144GJ-50-JEU, S144GJ-50-8EU-2 S160GM-50-3ED, JED, KED-2 S160GM-50-JMD, S160GM-50-8ED-2 S176GM-50-3EU, JEU, KEU-2 S176GM-50-8EU-2 S208GD-50-5EL-1 S208GD-50-5ML-2 P208GD-50-LML, MML-2 S208GD-50-8EU-2 P240GN-50-LMU, MMU-1 S256GD-40-LMV, MMV-2 S272GP-50-LMU, MMU-1 P304GL-50-NMU, PMU-1 S376GL-40-LMV, 1.05 Remarks Page
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Surface Vertical Package)
Package Counts Nominal Dimensions (mil) Outline Drawing Remarks Page
S32VN-65-9
Plastic (Small Outline J-Leaded Package)
Package Counts Terminal Spacing Linear Nominal Dimensions (mil) Outline Drawing Remarks Page
P24LA-50A-2 P26LA-50A-2 S26LA-300A-1 (20) (24)
(20) (20) (24)
P28LA-300A-1 P32LA-300A-1 P26LA-350A-2 P26LB-350A-1
P28LA-400A-2 P28LE-400A-1 P28LE-400A1
P32LE-400A P36LE-400A P40LE-400A-2 P42LE-400A P44LE-400A S34LG-500A
(Lead Chip) Type (10) Plastic (Quad Flat J-leaded Package)
Package Counts Terminal Spacing Linear Nominal Dimensions (mil) 1150 1150 Outline Drawing Remarks Page
P18L-50A-2 P28L-50A1-2 P32L-50A-2 P44L-50A1-2 P52L-50A1-2 P68L-50A1-2 P84L-50A3-2
CHAPTER
SURFACE MOUNT PACKAGES
(11) Ceramic (Quad Flat Non-leaded Package)
Package Classification Glass Sealed Counts 50A2 abnormal type 51A1 abnormal type Corner, with back Seam Weld Corner, with Corner, with back Corner, with back Features Outline Drawing X16KH-A-1 X18KH-50A-1 X20KH-50A-1 X22KH-50A-1 X24KH-50A1-1 X24KH-50A2-1 X28KH-50A1-1 X28KH-50A2-1 X32KH-50A-1 X48KH-40A-1 X64KH-40A-1 X24K-50A1-1 X24K-50A2-1 X28K-50A1-1 X28K-50A2-1 Remarks Page
(12) Ceramic WQFN (Quad Flat Non-leaded Package with Window)
Lead pitch (Unit: Package Classification Window Counts Features Outline Drawing X32KW-50A-1 X44KW-50A-2 X64KW-100A-2 X64KW-80A X64KW-80A1 X64KG-80A-1 X68KW-50A-1 X74KW-100A-1 X80KW-80A-1 X80KW-80A1 X80KW-65A-1 X80KK-65A X84KW-50A-1 X84KW-50A1-1 X94KW-80A-1 X100KW-65A-1 X100KL-65A X100KL-65A1 X120KW-80A-1 0.65 0.65 Remarks Page
CHAPTER
SURFACE MOUNT PACKAGES
(13) Ceramic (Pin Grid Array) I-lead Type
Package Classification Seam Weld Counts Heat Sink Features Outline Drawing X288R-50A-1 X528R-50A X528RF-50A-1 Remarks Page
(14) Plastic (Ball Grid Array)
(Unit: Package Counts Pitch 1.27 Package Size Outline Drawing Features Cavity Type P119S1-R4 P225S1-B1-1 S225S1-B1-1 1.27 1.27 1.27 S256S1-B6-1 S313S1-F5-1 S352S1-F6-1 P396S1-F1 P396S1-F11 1.27 1.27 1.27 Cavity Down Type S416S2-H6 S480S2-K6-1 S672S2-K6-1 Remarks Page
CHAPTER
SURFACE MOUNT PACKAGES
Dimensions Surface Mount Packages
Plastic (Small Outline Package) Unit: (225 mil) 0.08
Detail lead
5.37 MAX.
MAX.
1.49
0.15 +0.10 -0.05
0.1-
1.27 0.40 +0.10 -0.05
0.78 MAX.
0.10
Plastic
EIAJ CODE CODE SC-527-8AA* S8GM-50-225B-4
0.12
SSOP TSOP
(225 mil)
0.14
Detail lead
10.46 MAX.
MAX. 1.49
0.15 +0.10 -0.05
1.27 0.40 +0.10 -0.05 0.12
0.10
1.42 MAX.
EIAJ CODE CODE
SC-529-14AA* S14GM-50-225B,
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (225 mil) 0.15
Detail lead
10.46 MAX.
MAX. 1.49
0.15 +0.10 -0.05
1.27 0.40 +0.10 -0.05 0.12
0.10
0.78 MAX.
EIAJ CODE CODE (300 mil) 0.13
SC-530-16AA* S16GM-50-225B,
Detail lead
6.65 MAX.
7.7- 1.05
1.55
MAX.
0.125 0.075
0.15 -0.05
+0.10
1.27 0.40 +0.10 -0.05
1.42 MAX. 0.12
0.6-
0.10
EIAJ CODE CODE P8GM-50-300B-3
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (300 mil) 0.20
Detail lead
10.46 MAX.
1.55
0.20 +0.10 -0.05
MAX.
0.1-
1.27 0.40 +0.10 -0.05 0.12
1.42 MAX.
0.10
Plastic
EIAJ CODE CODE (300 mil) 0.22
SC-529-14BA* P14GM-50-300B-4
SSOP TSOP
Detail lead
10.46 MAX.
7.7-
EIAJ CODE CODE SC-530-16CA* P16GM-50-300B-4
MAX.
1.55
0.20 +0.10 -0.05
0.1-
0.6-
1.27 0.40 +0.10 -0.05
0.10 0.12
0.78 MAX.
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (300 mil) 0.28
Detail lead
13.00 MAX.
7.7-
1.55
0.20 +0.10 -0.05
MAX.
0.1-
0.6-
1.27 0.40 +0.10 -0.05
0.10 0.12
0.78 MAX.
EIAJ CODE CODE (300 mil) 0.34
SC-531-20AA* P20GM-50-300B,
Detail lead
15.54 MAX.
1.55 MAX.
7.7-
0.20 +0.10 -0.05
0.1-
0.6-
1.27 0.40 +0.10 -0.05
0.10 0.12
0.78 MAX.
EIAJ CODE CODE P24GM-50-300B-4
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (375 mil) 0.41
Detail lead
11.73 MAX.
10.5±
2.50
MAX.
0.15 +0.10 -0.05
0.1±
1.27 0.40 0.10 0.12
1.42 MAX.
0.8±
0.10
Plastic
EIAJ CODE CODE (375 mil) 0.38
SC-530-16BA* P16GM-50-375A-2
SSOP
TSOP
Detail lead
10.46 MAX.
10.3-0.3
2.50
MAX.
0.125-0.075
0.15 +0.10 -0.05
1.27 0.40 +0.10 -0.05 0.12
0.78 MAX.
0.8-0.2
0.15
EIAJ CODE CODE SC-530-16B* P16GM-50-375B-3
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (375 mil)
Detail lead
10.46 MAX.
2.50-0.2
10.3-0.3
0.15+0.10 -0.05
7.2-0.2
3°+7°
1.6-0.2
MAX. 0.125-0.075
1.27 0.40+0.10 -0.05 0.12
0.805 MAX.
0.8-0.2
0.10
EIAJ CODE CODE (375 mil) 0.45 P16GT-50-375B
Detail lead
13.00 MAX.
10.3-0.3
2.50
MAX.
0.125-0.075
1.27 0.40 +0.10 -0.05 0.12
0.78 MAX.
0.15 +0.10 -0.05 0.8-0.2
0.15
EIAJ CODE CODE
SC-531-20B* P20GM-50-375B-4
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (375 mil) 0.48
Detail lead
13.00 MAX.
2.50-0.2
10.3-0.3 7.2-0.2 1.6-0.2
MAX.
0.125-0.075
1.27 0.40 -0.05
+0.10
0.785 MAX. 0.10 0.12
0.15 -0.05
+0.10
0.8-0.2
Plastic
EIAJ CODE CODE (375 mil) 0.55
SC-531-20BA* P20GT-50-375B-1
SSOP TSOP
Detail lead
0.8-0.2 0.15
15.54 MAX.
2.50
10.3-0.3
MAX.
0.1-0.1
1.27 0.40 +0.10 -0.05 0.12
0.78 MAX.
0.15 -0.05
+0.10
EIAJ CODE CODE
SC-532-24A* P24GM-50-375B-3
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (375 mil) 0.58
Detail lead
15.71 MAX.
2.50-0.2
10.3-0.2 7.2-0.2 1.6-0.2
MAX.
0.125-0.075
1.27 0.40 -0.05
+0.10
0.87 MAX. 0.10 0.12
0.15 -0.05
+0.10
0.8-0.2
EIAJ CODE CODE (375 mil) 0.66
SC-532-24AA* P24GT-50-375B-1
Detail lead
18.07 MAX.
2.50
10.3-0.3
MAX.
0.15 -0.05
+0.10
0.1-0.1
1.27 0.40 +0.10 -0.05 0.12
0.78 MAX.
0.8-0.2 0.15
EIAJ CODE CODE
SC-533-28B* P28GM-50-375B-3
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (375 mil) 0.69
Detail lead
18.2 MAX.
2.50-0.2
10.3-0.3 7.2-0.2 1.6-0.2
MAX.
0.125-0.075
1.27
+0.10 0.40 -0.05
0.10 0.12
0.845 MAX.
0.15 -0.05
+0.10
0.8-0.2
Plastic
EIAJ CODE CODE (450 mil) 0.52
SC-533-28BA* P28GT-50-375B-1
SSOP
TSOP
Detail lead
16.51 MAX.
5°-5°
12.2
2.00
MAX.
0.15 -0.05
+0.10
+0.2
1.27 0.40 -0.10 0.12
1.27 MAX.
0.10
EIAJ CODE CODE
SC-532-24BA* P24GM-50-450A-2
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (450 mil) 0.62
Detail lead
19.05 MAX.
11.8 2.00 0.15 +0.10 0.05 MAX.
+0.2
1.27 0.40 -0.10
0.10 0.12
1.27 MAX.
0.7-
EIAJ CODE CODE (450 mil) 0.79
5°-5°
SC-533-28CA* P28GM-50-450A1-2
Detail lead
19.05 MAX.
2.55
11.8
MAX.
0.15 +0.10 0.05
-0.1
1.27 0.40-0.10
0.10 0.12
1.27 MAX.
0.7-
EIAJ CODE CODE
5°-5°
SC-533-28CA* P28GM-50-450A2-2
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (450 mil) 0.79
Detail lead
19.05 MAX.
2.55-0.1
11.8-0.3 8.4-0.1
0.20+0.07 -0.03
5°-5°
1.7-0.2
MAX. 0.2-0.1
0.10 1.27 0.40-0.10 0.12
1.27 MAX.
0.7-0.2
Plastic
EIAJ CODE CODE (525 mil)
SC-533-28CA* P28GU-50-450A-1
SSOP
TSOP
Detail lead
5°-5°
20.61 MAX.
14.1 11.3
0.20 +0.10 0.05
2.85 MAX.
0.05 -0.05
1.27 0.40 +0.10 0.05
0.10 0.12
0.78 MAX.
0.8-
EIAJ CODE CODE S32GM-50-525A-2
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (525 mil)
Detail lead
25.69 MAX.
2.4±0.1
14.1±0.3
0.15 -0.05
+0.10
11.24±0.1
5°±5°
MAX.
1.4±0.2
0.2±0.1
1.27
0.40±0.10 0.12
0.10
MAX.
0.8±0.2
EIAJ CODE CODE (600 mil) P40GW-50-525A
Detail lead
28.23 MAX.
2.7-0.1
16.04-0.3 13.24-0.1 1.4-0.2
MAX.
0.15-0.1
0.10 1.27 0.40-0.10 0.12
0.20+0.10 -0.05
0.78 MAX.
0.8-0.2
5°-5°
EIAJ CODE CODE
SC-660 P44GX-50-600A-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic (Small Outline Package)
Unit: (600 mil)
Detail lead
5°-5°
28.23 MAX.
0.15-0.1
0.40-0.10 1.27
0.12
MAX.
2.7-0.1
0.20+0.10 -0.05
0.10
0.78 MAX.
0.8-0.2
13.24-0.1 16.04-0.3
1.4-0.2
Plastic
EIAJ CODE CODE
SC-660 P44GX-50-600A1-1
SSOP TSOP
CHAPTER
SURFACE MOUNT PACKAGES
WSOP: Ceramic (Small Outline Package) Type Window
Unit: WSOP (525 mil) Type Window
13.0
Detail lead
MAX.
1.85 MAX.
21.59 MAX.
0.05 MIN.
14.2 11.35
1.42
1.27 0.40-0.10 0.12
0.15
1.27 MAX. 0.8-
0.14 +0.10 -0.05
EIAJ CODE CODE WSOP (525 mil) Type Window P32BW-50-525A-2
10.0
Detail lead
MAX.
1.85 MAX.
21.59 MAX.
0.05 MIN.
14.2 11.35 1.42
1.27 0.40-0.10 0.12
0.15
1.27 MAX. 0.8-
0.14 +0.10 -0.05
EIAJ CODE CODE P32BW-50-525A1-3
CHAPTER
SURFACE MOUNT PACKAGES
WSOP: Ceramic (Small Outline Package) Type Window
Unit: WSOP (525 mil) (Thin type)
10.92
1.20 MAX. 1.27 MAX.
Detail lead
20.85 MAX.
+0.2 -0.1
14.2 11.3
0.14 +0.10 -0.05
1.42
1.27 0.40-0.05
0.15 0.12
MAX. 0.8-
Plastic WSOP
P32BW-50-525A2
EIAJ CODE CODE WSOP (525 mil) (Thin type)
SSOP
7.85
Detail lead
TSOP
1.27 MAX.
1.20 MAX.
20.85 MAX.
+0.2 -0.1
14.2 11.3 1.42
1.27 0.40-0.05
0.15 0.12
MAX. 0.8-
0.14 +0.10 -0.05
EIAJ CODE CODE P32BW-50-525A3
CHAPTER
SURFACE MOUNT PACKAGES
Plastic Shrink (Shrink Small Outline Package)
Unit: Shrink (225 mil)
0.08
Detail lead
5.40 MAX.
6.2-0.3
MAX.
1.44
0.125-0.075
0.65 0.30 +0.10 -0.05
0.75 MAX. 0.10
0.15 +0.10 -0.05
0.5-0.2
0.10
EIAJ CODE CODE Shrink (225 mil) 0.08 P14GM-65-225B-2
Detail lead
5.50 MAX.
6.2-0.3 4.4-0.2
1.44
0.9-0.2
MAX.
0.125-0.075
0.65 0.10 0.20-0.10
0.475 MAX.
0.15 +0.10 -0.05
0.5-0.2
0.10
EIAJ CODE CODE P16GM-65-225B-2
CHAPTER
SURFACE MOUNT PACKAGES
Plastic Shrink (Shrink Small Outline Package)
Unit: Shrink (225 mil) 0.09
Detail lead
7.00 MAX.
6.4-0.2
1.15-0.1
4.4-0.1
1.0-0.2
1.45 MAX.
0.1-0.1
0.10 0.65 0.22 +0.10 -0.05 0.10
0.575 MAX.
0.15 +0.10 -0.05
0.5-0.2
P20GR-65-225C-1
EIAJ CODE CODE Shrink (300 mil) 0.17
SSOP
TSOP
Detail lead
7.00 MAX.
8.1-0.3 6.1-0.2 1.0-0.2
MAX.
0.125-0.075
0.65 0.30-0.10
0.10 0.12
0.575 MAX.
0.15 +0.10 -0.05 0.5-0.2
EIAJ CODE CODE P20GM-65-300B-2
CHAPTER
SURFACE MOUNT PACKAGES
Plastic Shrink (Shrink Small Outline Package)
Unit: Shrink (300 mil)
0.19
Detail lead
8.21 MAX.
1.7-0.1
8.1-0.3 6.1-0.2 1.0-0.2
MAX.
0.125-0.075
0.10
0.15 +0.10 -0.05
0.65 0.30-0.10 0.10
0.51 MAX.
0.5-0.2
EIAJ CODE CODE Shrink (300 mil) 0.24 P24GS-65-300B-1
Detail lead
10.11 MAX.
8.1-0.2 6.1-0.2 1.0-0.2
MAX.
1.7-0.1
0.125-0.075
0.65 0.30 -0.05
+0.10
0.10 0.51 MAX. 0.10
0.15 -0.05
+0.10
0.5-0.2
EIAJ CODE CODE P30GS-65-300B-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic Shrink (Shrink Small Outline Package)
Unit: Shrink (300 mil) 0.34
Detail lead
15.54 MAX.
7.7-0.3
1.55
MAX.
0.20 +0.10 -0.05
0.125-0.075
0.6-0.2
0.35 +0.10 -0.05
0.10 0.10
0.97 MAX.
P36GM-80-300B-3
EIAJ CODE CODE Shrink (300 mil) 0.30
SSOP
TSOP
Detail lead
12.71 MAX.
8.1-0.3 6.1-0.2 1.0-0.2
1.7-0.1
MAX.
0.125-0.075
0.10
0.65 0.30-0.10 0.10
0.51 MAX.
0.15 +0.10 -0.05
0.5-0.2
EIAJ CODE CODE P38GS-65-300B-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic Shrink (Shrink Small Outline Package)
Unit: Shrink (375 mil)
0.32
Detail lead
10.11 MAX.
1.7-0.1
10.0-0.2 8.0-0.2 1.0-0.2
MAX.
0.15 +0.10 -0.05
0.125-0.075
0.65 0.30-0.10 0.10
0.10
0.51 MAX.
0.5-0.2
EIAJ CODE CODE Shrink (375 mil) 0.42 S30GT-65-375B
Detail lead
12.8 MAX.
10.0-0.2 1.7-0.1 8.0-0.2 0.17-0.07 1.0-0.2
MAX.
0.125-0.075
0.65 0.32-0.08 0.10
0.10
0.55 MAX.
0.5-0.15
EIAJ CODE CODE P38GT-65-375B
CHAPTER
SURFACE MOUNT PACKAGES
Plastic Shrink (Shrink Small Outline Package)
Unit: Shrink (375 mil) 0.69
Detail lead
18.16 MAX.
2.5-0.2
10.3-0.3 7.15-0.2 1.6-0.2
MAX.
0.125-0.075
0.35 +0.10 -0.05
0.10
1.13 MAX.
0.15 +0.10 -0.05
0.8-0.2
S42GT-80-375B-1
0.10
EIAJ CODE CODE Shrink (375 mil) 0.51
SSOP
TSOP
Detail lead
16.21 MAX.
1.7-0.1
10.0-0.3 8.0-0.2 1.0-0.2
MAX.
0.125-0.075
0.65 0.30-0.10 0.10
0.10
0.63 MAX.
0.15 +0.10 -0.05
0.5-0.2
EIAJ CODE CODE P48GT-65-375B-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic Shrink (Shrink Small Outline Package)
Unit: Shrink (525 mil)
Detail lead
26.30 MAX.
13.8-0.3
11.8-0.1
MAX.
1.0-0.2
0.15-0.05
0.10
0.35-0.05
0.75 MAX. 0.10
0.20 +0.10 -0.05
0.5-0.2
EIAJ CODE CODE P64GW-80-525A-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (Thin Small Outline Package)
Unit: TSOP 0.21
Detail lead
MAX.
16.0-0.2 0.8-0.2
0.125 +0.10 -0.05
0.5-0.1
15.0-0.2 0.10
0.20-0.10
0.45 MAX. 0.08
1.02 MAX.
14.4-0.2
0.05-0.05
6.0-0.2
5°-5°
SSOP
EIAJ CODE CODE TSOP 0.21
SC-662 S24GX-50-JJH-1
Detail lead
0.05-0.05 5°-5°
TSOP
0.10 15.0-0.2
0.125 -0.05
+0.10
MAX.
0.20-0.10 0.5-0.1
0.08
0.45 MAX.
1.02 MAX.
0.8-0.2
14.4-0.2 16.0-0.2
6.0-0.2
EIAJ CODE CODE
SC-662 S24GX-50-JKH-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (Thin Small Outline Package)
Unit: TSOP 13.4) 0.23
Detail lead
MAX.
3°+7° 0.1-0.05
13.4-0.2 11.8-0.1 0.8-0.2 8.0-0.1
12.4-0.2 0.5-0.1
0.145+0.025 -0.015
0.55 0.10 0.22+0.08 -0.07 0.08
MAX.
EIAJ CODE CODE TSOP 13.4) 0.23 P28GW-55-9JL-1
Detail lead
0.1-0.05
MAX.
3°+7°
0.145+0.025 -0.015
0.10 12.4-0.2 0.5-0.1
0.22+0.08 -0.07
0.08 0.55
MAX.
11.8-0.1 13.4-0.2
0.8-0.2
8.0-0.1
EIAJ CODE CODE P28GW-55-9KL-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (Thin Small Outline Package)
Unit: TSOP (600 mil)
0.28
Detail lead
1.27 MAX.
MAX.
0.05-0.05
15.3-0.2 13.7
5°-5°
0.125 +0.10 -0.05
0.8-0.2
1.05
14.3-0.2 0.10
0.20-0.10 0.08
0.45 MAX.
0.5-0.1
EIAJ CODE CODE TSOP (600 mil)
S32GX-50-EJA-1
0.28
SSOP
TSOP
Detail lead
0.05-0.05
5°-5°
1.27 MAX.
MAX.
0.20-0.10 1.05
0.08
0.10 0.125 +0.10 -0.05 14.3-0.2 0.5-0.1
0.45 MAX.
13.7 15.3-0.2
0.8-0.2
EIAJ CODE CODE S32GX-50-EKA-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (Thin Small Outline Package)
Unit: TSOP 0.36
Detail lead
MAX.
20.0-0.2
0.05-0.05
5°-5°
0.125 +0.10 -0.05
18.4-0.2
0.8-0.2
8.0-0.2
0.5-0.1 0.10
19.0-0.2
0.20-0.10 0.08
0.45 MAX.
EIAJ CODE CODE TSOP 0.36
SC-664 S32GZ-50-KJH-1
Detail lead
5°-5°
0.10
0.125 -0.05
+0.10
MAX.
0.05-0.05
19.0-0.2
0.5-0.1
0.20-0.10
0.08
0.45 MAX.
1.02 MAX.
0.8-0.2
18.4-0.2 20.0-0.2
8.0-0.2
EIAJ CODE CODE
SC-664 S32GZ-50-KKH-1
1.02 MAX.
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (Thin Small Outline Package)
Unit: TSOP 0.44
MAX.
Detail lead
20.0-0.2
0.125 -0.05
+0.10
0.05-0.05
5°-5°
18.4-0.2
0.8-0.2
10.0-0.2
0.5-0.1 0.10
19.0-0.2
0.20-0.10 0.08
0.45 MAX.
1.02 MAX.
SSOP
EIAJ CODE CODE TSOP 0.44
SC-666 S40GZ-50-LJH-1
Detail lead
0.05-0.05
TSOP
MAX.
5°-5°
0.10
+0.10 -0.05
19.0-0.2
0.5-0.1
0.20-0.10
0.08
1.02 MAX.
0.45 MAX.
0.125
0.8-0.2
18.4-0.2 20.0-0.2
10.0-0.2
EIAJ CODE CODE
SC-666 S40GZ-50-LKH-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (Thin Small Outline Package)
Unit: TSOP 0.50
Detail lead
MAX.
0.125 +0.05 -0.035
18.0-0.2 16.4-0.1
0.05-0.05
12.0 -0.1 0.8-0.2
+0.2
0.5-0.1
17.0-0.2 0.10 0.20-0.10 0.08
0.45 MAX.
EIAJ CODE CODE TSOP 0.50
SC-668 S48GY-50-MJH-1
Detail lead
0.05-0.05
MAX.
0.10
0.125 -0.035
+0.05
0.20-0.10 0.5-0.1
0.08
17.0-0.2
0.45 MAX.
0.97
0.8-0.2
16.4-0.1 18.0-0.2
12.0 -0.1
+0.2
EIAJ CODE CODE
SC-668 S48GY-50-MKH-1
0.97
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (300 mil) 0.33
Detail lead
1.13 MAX. 0.05-0.05
17.54 MAX.
9.22-0.2
0.125 +0.10 -0.05
7.62-0.1
5°-5°
0.8-0.2
0.10 1.27 0.40-0.10 0.21
1.18 MAX.
0.5-0.1
S26GS-50-9JD-2
EIAJ CODE CODE TSOP (II) (300 mil) 0.33
SSOP
Detail lead
0.05-0.05 5°-5°
TSOP (II)
17.54 MAX.
0.40-0.10 1.27
0.21
1.13 MAX.
1.18 MAX. 0.10
0.125 +0.10 -0.05
0.5-0.1
0.8-0.2
7.62-0.1 9.22-0.2
S26GS-50-9KD-2
EIAJ CODE CODE
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (300 mil) 0.33
Detail lead
MAX.
17.40 MAX.
9.22-0.2 7.62-0.10 0.125 +0.10 -0.05 0.97 0.8-0.2
0.10 1.27 0.40-0.10 1.06 MAX. 0.21
0.5-0.1
EIAJ CODE CODE TSOP (II) (300 mil) 0.33 S26G3-50-7JD-1
Detail lead
0.05-0.05 5°-5°
17.40 MAX.
0.40-0.10 1.27
0.97
0.21
1.06 MAX.
0.5-0.1
0.125 +0.10 -0.05
0.10
MAX.
7.62-0.1 9.22-0.2
0.05-0.05
5°-5°
0.8-0.2
EIAJ CODE CODE S26G3-50-7KD-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (300 mil) 0.33
Detail lead
MAX. 0.1-0.05
17.36 MAX.
9.22-0.2 7.62-0.1
0.145 +0.025 -0.015
0.8-0.2
0.97
0.10 1.27 0.42 +0.08 -0.07 1.06 MAX. 0.21
0.5-0.1
S26G3-50-7JD1
EIAJ CODE CODE TSOP (II) (300 mil) 0.33
SSOP
TSOP (II)
Detail lead
0.1-0.05
MAX.
17.36 MAX.
0.42 +0.08 -0.07 1.27 0.10 0.21
1.06 MAX.
0.5-0.1
0.145 +0.025 -0.015
7.62-0.1 9.22-0.2 0.8-0.2
0.97
EIAJ CODE CODE S26G3-50-7KD1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (300 mil) 0.33
Detail lead
MAX.
17.36 MAX.
0.1-0.05
9.22-0.2
0.145 +0.025 -0.015
7.62-0.1
0.8-0.2
0.10 1.27 0.42 +0.08 -0.07 0.21
1.06 MAX.
0.5-0.1
EIAJ CODE CODE TSOP (II) (300 mil) 0.33 S26G3-50-9JD
Detail lead
0.1-0.05 3°+7°
7.62-0.1 9.22-0.2
17.36 MAX. 0.42 +0.08 -0.07 1.27 0.10
0.21
1.06 MAX.
0.145 +0.025 -0.015
MAX.
0.5-0.1
0.8-0.2
EIAJ CODE CODE S26G3-50-9KD
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.45
Detail lead
MAX.
18.81 MAX.
0.05-0.05
11.76-0.2 10.16-0.1
3°-3°
0.10 1.27 0.40-0.10 1.15 MAX. 0.21
0.125 +0.10 -0.05
0.8-0.2
0.97
0.5-0.1
S28G5-50-7JD-2
EIAJ CODE CODE TSOP (II) (400 mil)
0.45
SSOP
Detail lead
0.05-0.05
TSOP (II)
MAX.
3°-3°
18.81 MAX.
0.40-0.10 1.27
0.21
1.15 MAX.
0.10
0.125 +0.10 -0.05
0.5-0.1
0.97
10.16-0.1 11.76-0.2 0.8-0.2
S28G5-50-7KD-2
EIAJ CODE CODE
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.42
Detail lead
MAX.
18.81 MAX.
11.76-0.2 10.16-0.1 0.8-0.2
0.10 1.27 0.40-0.10 1.15 MAX. 0.21
0.125 -0.05
0.97
+0.10
0.5-0.1
0.05-0.05
EIAJ CODE CODE TSOP (II) (400 mil) 0.42 S28G5-50-7JD1-1
Detail lead
0.05-0.05
18.81 MAX.
0.40-0.10 1.27
0.97
0.21
1.15 MAX.
0.125 -0.05
+0.10
0.10
0.5-0.1
MAX.
10.16-0.1 11.76-0.2
3°-3°
3°-3°
0.8-0.2
EIAJ CODE CODE S28G5-50-7KD1-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.42
Detail lead
MAX.
18.81 MAX.
0.05-0.05
11.76-0.2 10.16-0.1
0.125 +0.10 -0.05 0.97
5°-5°
0.8-0.2
0.10 1.27 0.40-0.10 1.15 MAX. 0.21
0.5-0.1
S28G5-50-7JD2-1
EIAJ CODE CODE TSOP (II) (400 mil) 0.42
SSOP
TSOP (II)
Detail lead
0.05-0.05
5°-5°
MAX.
18.81 MAX.
0.40-0.10 1.27
0.21
1.15 MAX.
0.125 +0.10 -0.05
0.10
0.97
0.5-0.1
10.16-0.1 11.76-0.2
0.8-0.2
EIAJ CODE CODE S28G5-50-7KD2-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.45
Detail lead
MAX.
18.63 MAX.
0.1-0.05
11.76-0.2 10.16-0.1 0.145 +0.025 -0.015 0.97 0.8-0.2
0.10 1.27 0.42 +0.08 -0.07 1.075 MAX. 0.21
0.5-0.1
EIAJ CODE CODE TSOP (II) (400 mil) 0.45 S28G5-50-7JD3
Detail lead
0.1-0.05
18.63 MAX.
0.42 +0.08 -0.07 1.27
0.21
1.075 MAX. 0.10
0.145 +0.025 -0.015
0.5-0.1
0.97
MAX.
10.16-0.1 11.76-0.2
0.8-0.2
EIAJ CODE CODE S28G5-50-7KD3
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.42
Detail lead
MAX.
18.63 MAX.
11.76-0.2 10.16-0.1 0.8-0.2
0.10 1.27 0.42 +0.08 -0.07 1.075 MAX. 0.21
0.145 -0.015
0.97
+0.025
0.5-0.1
0.1-0.05
S28G5-50-7JD4
EIAJ CODE CODE TSOP (II) (400 mil) 0.42
SSOP
TSOP (II)
Detail lead
0.1-0.05
18.63 MAX.
0.42 +0.08 -0.07 1.27
0.97
0.21
0.10
0.145 -0.015
+0.025
1.075 MAX.
0.5-0.1
MAX.
10.16-0.1 11.76-0.2 0.8-0.2
EIAJ CODE CODE S28G5-50-7KD4
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.45
Detail lead
MAX.
18.63 MAX.
0.1-0.05
11.76-0.2 10.16-0.1
0.10 1.27 0.42 +0.08 -0.07 1.075 MAX. 0.21
0.145 +0.025 -0.015
0.8-0.2
0.97
0.5-0.1
EIAJ CODE CODE TSOP (II) (400 mil) 0.45 S28G5-50-7JD5
Detail lead
0.1-0.05
18.63 MAX.
0.42 +0.08 -0.07 1.27
0.21
0.145 +0.025 -0.015
0.10 0.97
1.075 MAX.
0.5-0.1
MAX.
10.16-0.1 11.76-0.2
0.8-0.2
EIAJ CODE CODE S28G5-50-7KD5
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.54
Detail lead
MAX.
21.17 MAX.
0.05-0.05
11.76-0.2 10.16-0.1
0.125 +0.10 -0.05 0.97
3°-3°
0.8-0.2
0.10 1.27 0.40-0.10 0.21
1.06 MAX.
0.5-0.1
S32G5-50-7JD-2
EIAJ CODE CODE TSOP (II) (400 mil) 0.54
SSOP
Detail lead
0.05-0.05
TSOP (II)
3°-3°
MAX.
21.17 MAX.
0.40-0.10 1.27
0.21
1.06 MAX. 0.5-0.1 0.125 +0.10 -0.05
0.10 0.97
10.16-0.1 11.76-0.2 0.8-0.2
S32G5-50-7KD-2
EIAJ CODE CODE
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.54
Detail lead
MAX.
21.17 MAX.
11.76-0.2 10.16-0.1
0.125 +0.10 -0.05
0.05-0.05
5°-5°
0.8-0.2
0.97
1.27 0.40-0.10
0.10 0.21
1.06 MAX.
0.5-0.1
EIAJ CODE CODE TSOP (II) (400 mil) 0.54 S32G5-50-7JD1-1
Detail lead
0.05-0.05 5°-5°
10.16-0.1 11.76-0.2
21.17 MAX.
0.40-0.10 1.27
0.21
0.125 +0.10 -0.05
0.10
1.06 MAX.
0.5-0.1
0.97
MAX.
0.8-0.2
EIAJ CODE CODE S32G5-50-7KD1-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.54
Detail lead
MAX.
21.17 MAX.
11.76-0.2 0.145 +0.025 -0.015 10.16-0.1 0.8-0.2
0.97
1.27 0.42 +0.08 -0.07
0.10 0.21
1.075 MAX.
0.5-0.1
0.1-0.05
S32G5-50-7JD2
EIAJ CODE CODE TSOP (II) (400 mil) 0.54
SSOP
TSOP (II)
Detail lead
0.1-0.05
21.17 MAX.
0.10
0.145 +0.025 -0.015
0.42 +0.08 -0.07 1.27
0.21
1.075 MAX.
0.5-0.1
MAX.
0.97
10.16-0.1 11.76-0.2 0.8-0.2
EIAJ CODE CODE S32G5-50-7KD2
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.49
Detail lead
MAX.
18.81 MAX.
0.125 +0.10 -0.05
11.76-0.2 10.16-0.1
0.05-0.05
3°-3°
0.8-0.2
0.97
0.30-0.10 0.13
0.10
MAX.
0.5-0.1
EIAJ CODE CODE TSOP (II) (400 mil) 0.49 S44G5-80-7JF-1
Detail lead
0.05-0.05 3°-3°
18.81 MAX.
0.30-0.10
0.13
0.10
0.125 +0.10 -0.05
MAX.
0.5-0.1
0.97
MAX.
10.16-0.1 11.76-0.2
0.8-0.2
EIAJ CODE CODE S44G5-80-7KF-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.50
Detail lead
MAX.
18.81 MAX.
0.125 +0.10 -0.05
11.76-0.2 10.16-0.1
0.05-0.05
0.8-0.2
0.97
0.30-0.10 0.13
0.10
MAX.
0.5-0.1
S44G5-80-7JF1-1
EIAJ CODE CODE TSOP (II) (400 mil) 0.50
SSOP
TSOP (II)
Detail lead
0.05-0.05
MAX.
18.81 MAX.
0.30-0.10
0.13
0.10
0.125 +0.10 -0.05
MAX.
0.5-0.1
0.97
10.16-0.1 11.76-0.2 0.8-0.2
S44G5-80-7KF1-1
EIAJ CODE CODE
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.50
Detail lead
MAX.
18.63 MAX.
0.125 +0.10 -0.05
11.76-0.2 10.16-0.1
0.05-0.05
0.8-0.2
0.97
0.30-0.10 0.13
0.10
0.93 MAX.
0.5-0.1
EIAJ CODE CODE TSOP (II) (400 mil) 0.50 S44G5-80-7JF2
Detail lead
0.05-0.05
18.63 MAX.
0.30-0.10
0.13
0.10
0.93 MAX.
0.125 +0.10 -0.05
0.5-0.1
0.97
MAX.
10.16-0.1 11.76-0.2
0.8-0.2
EIAJ CODE CODE S44G5-80-7KF2
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.50
Detail lead
MAX.
18.63 MAX.
0.145 +0.025 -0.015
11.76-0.2 10.16-0.1
0.1-0.05
0.8-0.2
0.97
0.32 +0.08 -0.07 0.13
0.10
0.93 MAX.
0.5-0.1
S44G5-80-7JF3
EIAJ CODE CODE TSOP (II) (400 mil) 0.50
SSOP
TSOP (II)
Detail lead
0.1-0.05
MAX.
18.63 MAX.
0.32 +0.08 -0.07
0.97
0.13
0.93 MAX.
0.145 +0.025 -0.015
0.10
0.5-0.1
10.16-0.1 11.76-0.2 0.8-0.2
EIAJ CODE CODE S44G5-80-7KF3
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.49
Detail lead
MAX.
18.63 MAX.
0.145+0.025 -0.015
11.76-0.2 10.16-0.1
0.1-0.05
0.8-0.2
0.97
0.32 +0.08 -0.07 0.13
0.10
0.93 MAX.
0.5-0.1
EIAJ CODE CODE TSOP (II) (400 mil) 0.49 S44G5-80-7JF4
Detail lead
0.1-0.05
18.63 MAX.
0.32 +0.08 -0.07
0.97
0.13
0.10
0.145 +0.025 -0.015
0.93 MAX.
0.5-0.1
MAX.
10.16-0.1 11.76-0.2
0.8-0.2
EIAJ CODE CODE S44G5-80-7KF4
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.50
Detail lead
MAX.
18.63 MAX.
0.145+0.025 -0.015
11.76-0.2 10.16-0.1
0.1-0.05
0.8-0.2
0.97
0.32 +0.08 -0.07 0.13
0.10
0.93 MAX.
0.5-0.1
S44G5-80-7JF5
EIAJ CODE CODE TSOP (II) (400 mil) 0.50
SSOP
TSOP (II)
Detail lead
0.1-0.05
18.63 MAX.
MAX.
0.32 +0.08 -0.07 0.13
0.145 +0.025 -0.015
0.10
0.93 MAX.
0.5-0.1
10.16-0.1 11.76-0.2 0.8-0.2
0.97
EIAJ CODE CODE S44G5-80-7KF5
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.62
Detail lead
MAX.
21.45 MAX.
0.05-0.05
11.76-0.2 10.16-0.1
0.125 +0.10 -0.05 0.97
5°-5°
0.8-0.2
0.10 0.30-0.10 1.13 MAX. 0.13
0.5-0.1
EIAJ CODE CODE TSOP (II) (400 mil) 0.62 S50G5-80-7JF-1
Detail lead
0.05-0.05 5°-5°
21.45 MAX.
0.30-0.10
0.13
1.13 MAX.
0.125 +0.10 -0.05
0.10
0.5-0.1
0.97
MAX.
10.16-0.1 11.76-0.2
0.8-0.2
EIAJ CODE CODE S50G5-80-7KF-1
CHAPTER
SURFACE MOUNT PACKAGES
Plastic TSOP (II) (Thin Small Outline Package)
Unit: TSOP (II) (400 mil) 0.51
Detail lead
MAX.
21.45 MAX.
0.05-0.05
11.76-0.2 10.16-0.1
0.125 +0.10 -0.05 0.97
0.8-0.2
0.10 0.30-0.10 1.1

1991, 1992, 1994, 1996 Document C10943XJ6V0IF00 (Previous IEI-635

Top Searches for this datasheet

Other recent searches