August 1999, ver. Introduction This data sheet provides foll

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

August 1999, ver. Introduction This data sheet provides foll

Datasheet Thumbnail

Top Searches for this datasheet

Altera Device Package Information
August 1999, ver.
Introduction
This data sheet provides following package information Altera® devices:
Lead materials Thermal resistance Package weights Package outlines
this data sheet, packages listed order ascending count.
Lead Materials
Table shows available package types, package acronyms, lead materials, lead finishes Altera device packages.
Table Altera Device Lead Materials
Package Type
Ceramic dual in-line Plastic dual in-line Ceramic J-lead chip carrier Plastic J-lead chip carrier Ceramic pin-grid array Plastic small-outline integrated circuit Plastic quad flat pack Plastic thin quad flat pack Power quad flat pack Ball-grid array FineLine BGANotes:
Solder lead finishes 60/40 typical, solder plate lead finished 85/15 typical. industry-standard lead glass called T-187 (lead oxide glass) used seal packages. This material manufactured Sumitomo Corporation.
Package Acronym
CerDIP PDIP JLCC PLCC SOIC PQFP TQFP RQFP FineLine
Lead Material
Alloy Copper Alloy Copper Alloy Copper Copper Copper Copper Tin-lead alloy (63/37) Tin-lead alloy (63/37)
Lead Finish
Solder Solder plate Solder Solder plate Gold over nickel plate Solder plate Solder plate Solder plate Solder plate
Altera Corporation
A-DS-PKG-08
Altera Device Package Information
Thermal Resistance
Tables through provide (junction-to-ambient thermal resistance) (junction-to-case thermal resistance) values Altera APEX20K APEX 20KE, FLEX® FLEX 10KE, FLEX 8000, FLEX 6000, MAX® 9000, 7000, 5000, 3000A, ClassicTM, configuration devices.
Table Thermal Resistance APEX APEX 20KE Devices (Part
Device
EP20K60E
Count
Package
TQFP FineLine PQFP PQFP Fineline TQFP FineLine PQFP PQFP FineLine TQFP PQFP PQFP FineLine RQFP RQFP FineLine PQFP PQFP FineLine FineLine RQFP RQFP FineLine
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
33.0 30.6 35.0 30.0 27.6 15.0 33.0 30.6 35.0 30.0 27.6 15.0 33.0 35.0 30.0 15.0 21.0 18.0 20.0 15.0 21.0 35.0 30.0 15.0 21.0 26.0 29.5 24.0 22.0 26.3 12.0 26.0 29.5 24.0 22.0 26.3 12.0 26.0 24.0 22.0 12.0 17.0 12.0 13.0 12.0 17.0 24.0 22.0 12.0 17.0 22.0 28.2 18.0 17.0 24.9 22.0 28.2 18.0 17.0 24.9 22.0 18.0 17.0 14.0 10.0 14.0 18.0 17.0 14.0 20.0 25.4 14.0 14.0 22.2 20.0 25.4 14.0 14.0 22.2 20.0 14.0 14.0 13.0 13.0 14.0 14.0 13.0
EP20K100 EP20K100E
EP20K160E
EP20K200
EP20K200E
17.5 18.0 20.0
17.1 12.0 13.0
16.8 10.0
16.3
EP20K300E
17.5
17.1
16.8
16.3
Altera Corporation
Altera Device Package Information
Table Thermal Resistance APEX APEX 20KE Devices (Part
Device
EP20K400
Count
Package
FineLine RQFP RQFP FineLine FineLine FineLine FineLine FineLine
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
13.0 17.5 18.0 20.0 13.0 19.0 10.0 17.1 12.0 13.0 10.0 18.0 16.8 10.0 17.0 16.3 16.0
EP20K400E
EP20K600E
1020
18.0
17.0
16.0
15.0
EP20K1000E
1020
EP20K1500E
1020
Note:
thermal resistance values, contact Altera Applications.
Altera Corporation
Altera Device Package Information
Table Thermal Resistance FLEX Devices (Part Notes (1),
Device
EPF10K10
Count
Package
PLCC TQFP PQFP TQFP TQFP PQFP FineLine TQFP RQFP RQFP RQFP RQFP TQFP PQFP PQFP FineLine FineLine TQFP PQFP FineLine FineLine RQFP RQFP RQFP PQFP FineLine
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
11.0 10.0 35.0 33.0 35.0 44.0 33.0 35.0 33.0 33.0 18.0 20.0 18.0 20.0 15.0 33.0 35.0 30.0 28.0 15.0 23.9 33.0 35.0 28.0 23.9 18.0 20.0 20.0 15.0 12.0 10.0 30.0 15.0 23.0 23.0 26.0 24.0 38.0 26.0 24.0 30.0 26.0 12.0 13.0 12.0 13.0 12.0 26.0 24.0 22.0 26.0 12.0 22.0 26.0 24.0 26.0 22.0 12.0 13.0 13.0 12.0 10.0 22.0 12.0 22.0 18.0 22.0 18.0 34.0 22.0 18.0 28.0 22.0 10.0 10.0 22.0 18.0 17.0 24.0 20.7 22.0 18.0 24.0 20.7 10.0 10.0 17.0 21.5 14.0 20.0 14.0 31.0 20.0 14.0 26.0 20.0 20.0 14.0 14.0 23.0 19.5 20.0 14.0 23.0 19.5 14.0 20.0
EPF10K10A
EPF10K20
EPF10K30
EPF10K30A
EPF10K30E
EPF10K40 EPF10K50
EPF10K50V
Altera Corporation
Altera Device Package Information
Table Thermal Resistance FLEX Devices (Part Notes (1),
Device
EPF10K50E
Count
Package
TQFP PQFP PQFP FineLine FineLine TQFP PQFP PQFP FineLine FineLine RQFP
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
33.0 35.0 30.0 29.7 15.0 23.5 33.0 35.0 30.0 29.7 15.0 25.0 20.0 20.0 15.0 21.7 13.0 35.0 30.0 29.0 35.0 30.0 28.8 15.0 23.0 13.0 30.0 15.0 22.4 13.0 18.9 26.0 24.0 22.0 28.0 12.0 22.2 26.0 24.0 22.0 28.0 12.0 24.0 13.0 13.0 12.0 20.6 10.0 24.0 22.0 27.0 24.0 22.0 27.5 12.0 21.8 10.0 22.0 12.0 21.2 10.0 18.2 22.0 18.0 17.0 26.6 21.0 22.0 18.0 17.0 26.6 23.0 10.0 10.0 19.6 18.0 17.0 25.0 18.0 17.0 26.1 20.7 17.0 20.2 17.6 20.0 14.0 14.0 24.0 19.2 20.0 14.0 14.0 24.0 21.5 18.2 14.0 14.0 24.0 14.0 14.0 23.4 18.9 14.0 18.5 16.9
EPF10K50S
EPF10K70 EPF10K100
EPF10K100A
RQFP FineLine PQFP PQFP FineLine PQFP PQFP FineLine FineLine PQFP FineLine FineLine
EPF10K100B
EPF10K100E
EPF10K130V EPF10K130E
Altera Corporation
Altera Device Package Information
Table Thermal Resistance FLEX Devices (Part Notes (1),
Device
EPF10K200E
Count
Package
FineLine RQFP FineLine FineLine
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
13.0 17.8 20.0 15.0 21.0 13.0 20.0 10.0 17.3 13.0 12.0 17.0 10.0 19.7 17.0 10.0 14.0 19.4 16.4 13.0 19.0
EPF10K200S
Notes:
Bold type designates measured values. FLEX 10KA FLEX 10KE devices measured. Attached pin-fin heat sink. Attached motor driven heat sink.
Altera Corporation
Altera Device Package Information
Table Thermal Resistance FLEX 8000 Devices
Device
EPF8282A EPF8282AV EPF8452A
Note
Count
Package
PLCC TQFP PLCC TQFP PQFP PLCC PQFP PQFP RQFP TQFP PQFP PQFP RQFP PQFP PQFP RQFP PQFP RQFP RQFP
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
11.0 10.0 11.0 10.0 11.0 35.0 44.0 35.0 44.0 35.0 20.0 35.0 20.0 16.0 35.0 18.0 33.0 20.0 16.0 35.0 18.0 28.0 35.0 14.0 30.0 20.0 30.0 20.0 14.0 20.0 23.0 38.0 23.0 38.0 26.0 13.0 23.0 13.0 11.0 24.0 12.0 26.0 13.0 11.0 24.0 12.0 19.0 24.0 10.0 22.0 13.0 22.0 13.0 10.0 13.0 18.0 34.0 18.0 34.0 20.0 10.0 18.0 10.0 18.0 22.0 10.0 18.0 14.0 18.0 17.0 10.0 17.0 10.0 10.0 14.0 31.0 14.0 31.0 16.0 14.0 14.0 20.0 14.0 11.0 14.0 14.0 14.0
EPF8636A
EPF8820A
EPF81188A
EPF81500A
Note:
Bold type designates measured values.
Altera Corporation
Altera Device Package Information
Table Thermal Resistance FLEX 6000 Devices
Device
EPF6010A EPF6016
Count
Package
TQFP TQFP TQFP PQFP PQFP TQFP FineLine TQFP PQFP FineLine TQFP PQFP PQFP FineLine
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
10.0 10.0 10.0 44.0 33.0 33.0 35.0 30.0 28.0 44.0 33.0 33.0 35.0 27.0 33.0 35.0 30.0 28.0 27.0 38.0 26.0 26.0 24.0 22.0 22.0 38.0 29.0 26.0 24.0 23.0 26.0 24.0 22.0 22.0 23.0 34.0 22.0 22.0 18.0 17.0 20.0 34.0 26.0 22.0 18.0 21.0 22.0 18.0 17.0 20.0 21.0 31.0 20.0 20.0 14.0 14.0 19.0 31.0 24.0 20.0 14.0 19.0 20.0 14.0 14.0 19.0 19.0
EPF6016A
EPF6024A
Table Thermal Resistance 9000 Devices
Device
EPM9320 EPM9320A
Notes (1),
Count
Package
PLCC RQFP PLCC RQFP RQFP RQFP RQFP RQFP RQFP RQFP
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
11.0 11.0 35.0 18.0 14.0 15.0 35.0 18.0 20.0 18.0 20.0 18.0 20.0 14.0 20.0 15.0 23.0 12.0 10.0 12.0 23.0 12.0 13.0 12.0 13.0 12.0 13.0 10.0 13.0 12.0 18.0 18.0 10.0 10.0 10.0 10.0 14.0 14.0
EPM9400
EPM9480 EPM9560 EPM9560A
Altera Corporation
Altera Device Package Information Data Sheet Notes:
Bold type designates measured values. Thermal resistance values 9000 devices preliminary.
Table Thermal Resistance 7000 Devices (Part
Device
EPM7032S EPM7032
Notes (1),
Count
Package
PLCC TQFP PLCC PQFP TQFP
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
19.0 18.0 19.0 19.0 19.0 19.0 11.0 10.0 19.0 12.0 11.0 10.0 19.0 10.0 25.2 12.0 11.0 11.0 11.0 10.0 11.0 14.7 52.0 64.0 52.0 63.0 64.0 52.0 64.0 52.0 64.0 52.0 64.0 35.0 44.0 52.0 64.0 44.0 35.0 44.0 52.0 64.0 44.0 65.0 44.0 35.0 50.0 35.0 44.0 50.0 42.0 33.0 35.0 35.0 45.0 56.0 45.0 55.0 56.0 45.0 56.0 45.0 56.0 45.0 56.0 23.0 38.0 45.0 56.0 33.0 23.0 38.0 45.0 56.0 38.0 61.0 33.0 23.0 43.0 23.0 38.0 43.0 39.0 26.0 26.0 33.3 41.0 50.0 41.0 48.0 50.0 41.0 50.0 41.0 50.0 41.0 50.0 18.0 34.0 41.0 50.0 25.0 18.0 34.0 41.0 50.0 34.0 58.0 25.0 18.0 38.0 18.0 34.0 38.0 37.0 22.0 20.0 31.6 36.0 45.0 36.0 43.0 45.0 36.0 45.0 36.0 45.0 36.0 45.0 14.0 31.0 36.0 45.0 20.0 14.0 31.0 36.0 45.0 31.0 55.0 20.0 14.0 34.0 14.0 31.0 34.0 36.0 20.0 16.0 28.0
EPM7032AE EPM7032B EPM7064S
PLCC TQFP PLCC TQFP PLCC TQFP PLCC TQFP PLCC TQFP PLCC PLCC TQFP PLCC TQFP TQFP FineLine PLCC PLCC PQFP PLCC TQFP PQFP FineLine
EPM7064
EPM7064AE EPM7064B
EPM7096
EPM7128A EPM7128E EPM7128S
TQFP PQFP FineLine
Altera Corporation
Altera Device Package Information
Table Thermal Resistance 7000 Devices (Part
Device
EPM7128B
Notes (1),
Count
Package
TQFP FineLine TQFP FineLine PLCC TQFP FineLine TQFP FineLine PLCC PQFP TQFP
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
10.0 10.0 11.0 10.0 19.3 12.9 11.0 11.0 10.0 10.0 10.0 10.0 10.0 10.3 44.0 33.0 33.0 27.0 35.0 44.0 50.1 33.0 43.6 35.0 50.0 44.0 35.0 35.0 20.0 35.0 44.0 33.0 33.0 20.0 35.0 16.0 35.0 18.0 28.0 34.0 44.0 33.0 33.0 35.0 28.0 33.0 38.0 29.0 26.0 23.0 23.0 38.0 47.9 26.0 41.4 23.0 43.0 38.0 26.0 26.0 13.0 26.0 38.0 29.0 26.0 13.0 26.0 11.0 24.0 12.0 22.0 32.0 38.0 29.0 26.0 24.0 22.0 31.0 34.0 26.0 22.0 21.0 18.0 34.0 45.6 22.0 39.2 18.0 38.0 34.0 20.0 20.0 10.0 20.0 34.0 26.0 22.0 10.0 20.0 18.0 20.0 29.0 34.0 26.0 22.0 18.0 20.0 29.5 31.0 24.0 20.0 19.0 14.0 31.0 41.1 20.0 35.3 14.0 34.0 33.0 16.0 16.0 16.0 31.0 24.0 20.0 16.0 14.0 19.0 28.0 31.0 24.0 20.0 14.0 19.0 26.6
EPM7128AE
EPM7160E EPM7160S
EPM7192S EPM7192E
PQFP PQFP PQFP
EPM7256A EPM7256B EPM7256E EPM7256S
TQFP FineLine
TQFP PQFP
PQFP RQFP
EPM7256AE
FineLine TQFP FineLine
TQFP PQFP FineLine
Altera Corporation
Altera Device Package Information
Table Thermal Resistance 7000 Devices (Part
Device
EPM7512AE EPM7512B
Notes (1),
Count
Package
TQFP PQFP FineLine
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
33.0 35.0 28.0 29.6 26.0 24.0 22.0 28.4 22.0 18.0 20.0 27.0 20.0 14.0 19.0 24.2
Notes:
Bold type designates measured values. Values measured 7000A devices. Thermal resistance values 7000A devices preliminary.
Altera Corporation
Altera Device Package Information
Table Thermal Resistance 5000 Devices
Device
EPM5032
Note
C/W)
44.0 48.0 69.0 59.0 62.0 52.0 39.0 44.0 32.0 30.0 35.0 50.0 26.0 30.0 35.0 27.0
Count
Package
CerDIP PDIP JLCC PLCC
C/W)
12.0 19.0 10.0 15.0 11.0 12.0 11.0 10.0 11.0
EPM5064
JLCC PLCC
EPM5128 EPM5128A
JLCC PLCC
EPM5130
JLCC PLCC
PQFP
EPM5192
JLCC PLCC
Note:
Bold type designates measured values.
Table Thermal Resistance 3000A Devices
Device
EPM3032A
Count
Package
TQFP PLCC
C/W) C/W) C/W) C/W) C/W) Still ft./min. ft./min. ft./min.
19.0 10.0 11.0 10.0 10.0 64.0 52.0 44.0 35.0 44.0 44.0 33.0 33.0 35.0 56.0 45.0 38.0 23.0 38.0 38.0 26.0 26.0 24.0 50.0 41.0 34.0 18.0 34.0 34.0 22.0 22.0 18.0 45.0 36.0 31.0 14.0 31.0 31.0 20.0 20.0 14.0
EPM3064A
TQFP PLCC
EPM3128A EPM3256A
TQFP TQFP TQFP TQFP PQFP
Altera Corporation
Altera Device Package Information
Table Thermal Resistance Classic Devices
Device
EP600I
Note
C/W)
67.0 60.0 64.0 60.0 55.0 77.0 74.0 60.0 67.0 64.0 49.0 58.0 40.0 49.0 58.0 44.0 51.0 55.0 44.0 47.0 44.0 38.0
Count
Package
PDIP CerDIP
C/W)
22.0 18.0 16.0 10.0 18.0 17.0 13.0 18.0 22.0 16.0 23.0 10.0 12.0 23.0 10.0 17.0 29.0 16.0 13.0 12.0 13.0
EP610
PLCC CerDIP PDIP SOIC
EP610I
PLCC CerDIP PDIP
EP900I EP910
PLCC PDIP PLCC CerDIP PDIP
EP910I
PLCC CerDIP PDIP
EP1800I EP1810
PLCC PLCC JLCC PLCC
Table Thermal Resistance Configuration Devices (Part Note
Device
EPC1064 EPC1064V
Count
Package
PDIP PLCC TQFP PDIP PLCC
C/W)
C/W)
EPC1213
Altera Corporation
Altera Device Package Information
Table Thermal Resistance Configuration Devices (Part Note
Device
EPC1441
Count
Package
PDIP PLCC TQFP PDIP PLCC PLCC TQFP
C/W)
C/W)
EPC1
EPC2
Note tables:
Bold type designates measured values.
Package Weights
Table shows package weights Altera devices. device adds insignificant amount weight; therefore, these weights used device that package.
Table Package Weights Altera Devices (Part
Pins
Package
PDIP PLCC CerDIP PDIP SOIC PLCC PDIP CerDIP TQFP PDIP CerDIP PLCC JLCC PQFP TQFP JLCC PLCC PLCC JLCC
Weight grams)
13.2 10.4 10.9 10.6 Altera Corporation
Altera Device Package Information
Table Package Weights Altera Devices (Part
Pins
1020 Note:
package weight information, contact Altera Applications.
Package
PQFP TQFP FineLine TQFP PQFP FineLine PQFP RQFP RQFP PQFP FineLine RQFP FineLine FineLine FineLine FineLine
Weight grams)
14.2 19.9 24.1 10.8 25.5 15.1 29.5 26.3 29.5 59.0 69.0 12.0 14.9 74.9
Altera Corporation
Altera Device Package Information
Package Outlines
Package outlines listed order ascending count. Altera package outlines meet requirements JEDEC Publication Table lists JEDEC package outlines that used with Altera devices.
Table JEDEC Package Outline Cross Reference (Part
Pins
Note
Package
PDIP PLCC CerDIP PDIP SOIC SOIC PLCC JLCC PDIP CerDIP TQFP PDIP CerDIP PLCC JLCC PQFP TQFP JLCC PLCC JLCC PLCC PQFP TQFP FineLine TQFP PQFP FineLine
JEDEC Outline
MS-001 MS-018 MO-036 MS-001 MS-013 MS-013 MS-018 MO-087 MS-001 MO-058 MO-136 MS-011 MS-103 MS-018 MO-087 MO-108 MO-136 MO-067 MO-087 MS-018 MO-087 MS-018 MO-067 MO-108 MO-136 MO-067 MO-192 MO-136 MO-108 MO-067 MO-067 MO-192
Altera Corporation
Altera Device Package Information
Table JEDEC Package Outline Cross Reference (Part
Pins
1020 Notes table:
more information, contact Altera Applications (800) 800-EPLD. These packages exceed JEDEC dimension height.
Note
Package
PQFP RQFP RQFP PQFP FineLine RQFP FineLine FineLine FineLine FineLine
JEDEC Outline
MO-143 MO-143 MO-151 MO-067 MO-143 MO-143 MO-151 MO-192 MO-067 MO-143 MO-192 MO-192 MO-192 MO-192 MO-192 MO-192
Altera Corporation
Altera Device Package Information
Table shows different packages counts Altera devices.
Table Packages Counts (Part
Package
Code
Count
FineLine
1020
CerDIP
JLCC
PLCC
Altera Corporation
Altera Device Package Information
Table Packages Counts (Part
Package
PDIP
Code
Count
PQFP
RQFP
SOIC TQFP
Table summarizes maximum lead coplanarity Altera J-lead packages.
Table Maximum Lead Coplanarity J-Lead, PLCC, BGA, FineLine Packages
Package
JLCC PLCC packages with lead pitch 0.65 greater packages with lead pitch packages with pins greater FineLine
Maximum Lead Coplanarity
0.006 inches (0.15 0.004 inches (0.10 0.004 inches (0.10 0.003 inches (0.08 0.003 inches (0.08 0.008 inches (0.20 0.008 inches (0.20
information device package ordering codes, Ordering Information this data book.
Altera Corporation
Altera Device Package Information
Dimension Formats
Package outline dimensions shown following formats: min. inches (min. millimeters) max. inches (max. millimeters) nominal inches tolerance (nominal millimeters tolerance) inches (millimeters) BSC, Min., Max., Ref., Typ., Dia.,
Table shows units used describe package outline dimensions.
Table Package Outline Units
Unit
Min. Max. Ref. Typ. Dia.
Description
Basic. Represents theoretical exact dimension dimension target. Minimum dimension specified. Maximum dimension specified. Reference. Represents dimension reference only. This value device specification. Typical. Provided general value. This value device specification. Radius. Represents curve dimension. Diameter. Represents curve dimension. Square. Indicates square feature package with equal length width dimensions.
following figures show package outlines Altera devices. Controlling dimensions noted package outline drawings. 984-pin 1020-pin FineLine package outline drawings will available future revisions this document.
Altera Corporation
Altera Device Package Information
Figure 8-Pin Plastic Dual In-Line Package (PDIP)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View) (End View) 0.300 (7.62) 0.325 (8.26) 0.130 (3.30)
0.360 (9.14) 0.380 (9.65) 0.240 (6.10) 0.260 (6.60)
0.100 (2.54)
0.170 Max. (4.32)
0.027 (0.686) 0.037 (0.940)
0.015 Min. (0.381)
0.055 (1.40) 0.065 (1.65) 0.016 (0.406) 0.020 (0.508)
0.125 (3.18) 0.135 (3.43)
0.008 (0.20) 0.012 (0.30)
0.300 (7.62)
Altera Corporation
Altera Device Package Information
Figure 20-Pin Plastic J-Lead Chip Carrier (PLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Bottom View) (Side View)
0.045 (1.14)
Detail
0.042 (1.07) 0.048 (1.22) 0.013 (0.33) 0.021 (0.53) 0.026 (0.66) 0.032 (0.81) 0.090 (2.29) 0.120 (3.04) 0.165 (4.19) 0.180 (4.57)
0.290 (7.37) 0.320 (8.13)
0.350 (8.89) 0.356 (9.04) 0.385 (9.78) 0.395 (10.03)
0.050 (1.27)
Detail
0.010 Max. (0.254)
0.020 Min. (0.508)
0.025 (0.64) 0.040 (1.14)
Altera Corporation
Altera Device Package Information
24-Pin Ceramic Dual In-Line Package (CerDIP)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View)
Window
0.005 Min. (0.13) 1.26 0.02 (32.00 0.51)
0.295 0.015 (7.49 0.38) 0.090 Max. (2.29)
(Side View) 0.028 0.013 (0.71 0.33) 0.200 Max. (5.08)
(End View) 0.305 0.015 (7.75 0.38)
0.010 0.002 (0.25 0.05) 0.100 (2.54) 0.018 0.003 (0.46 0.08) 0.125 Min. (3.18) 0.057 0.008 (1.45 0.20) 0.380 0.015 (9.65 0.38)
24-Pin Plastic Dual In-Line Package (PDIP)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.14) 0.060 (1.52) 0.020 Min. (0.508)
0.245 (6.22) 0.270 (6.86)
1.240 (31.48) 1.255 (31.88)
(Side View) 0.140 (5.51) 0.170 (4.32) 0.015 Min. (0.38)
(End View) 0.295 (7.49) 0.325 (8.26)
0.125 (3.18) 0.145 (3.68)
0.008 (0.20) 0.012 (0.30) 0.020 Min. (0.508) 0.100 (2.54) 0.016 (0.41) 0.020 (0.51) 0.125 (3.18) 0.135 (3.43) 0.310 (7.87) 0.360 (9.14)
Altera Corporation
Altera Device Package Information
24-Pin Plastic Small-Outline Integrated Circuit (SOIC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.599 (15.21) 0.614 (15.59)
0.291 (7.39) 0.299 (7.59) (End View)
(Side View) Typ. 0.093 (2.36) 0.104 (2.64) Typ.
0.394 (10.00) 0.419 (10.64) 0.013 (0.33)
Typ. 0.013 (0.330) 0.020 (0.508) 0.004 (0.10) 0.012 (0.30) 0.050 (1.27) 0.016 (0.41) 0.50 (1.27)
28-Pin Ceramic Dual In-Line Package (CerDIP)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View)
Window
0.005 Min. (0.127)
0.290 0.010 (7.37 0.25) 0.090 Max. (3.54) (End View) 0.305 0.015 (7.75 0.38)
1.450 0.010 (36.83 0.25)
0.025 0.010 (0.64 0.25)
(Side View)
0.200 Max. (5.08)
0.010 0.002 (0.25 0.05) 0.100 (2.54) 0.018 0.002 (0.46 0.05) 0.125 Min. (3.18) 0.057 0.008 (1.45 0.20) 0.380 0.015 (9.65 0.38)
Altera Corporation
Altera Device Package Information
28-Pin Plastic Dual In-Line Package (PDIP)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.14) 0.055 (1.39) 0.020 Min. (0.508) 0.270 (6.86) 0.295 (7.49)
Notch appear some packages.
1.345 (34.16) 1.370 (34.80) (End View) (Side View) 0.140 (3.56) 0.180 (4.57) 0.020 Typ. (0.51) 0.295 (7.49) 0.325 (8.26)
0.125 (3.18) 0.145 (3.68)
0.008 (0.2) 0.012 (0.3) 0.028 Min. (0.711) 0.100 (2.54) 0.015 (0.38) 0.021 (0.53) 0.125 (3.18) 0.135 (3.43) 0.310 (7.87) 0.360 (9.14)
Altera Corporation
Altera Device Package Information
28-Pin Ceramic J-Lead Chip Carrier (JLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.14) (Bottom View) (Side View)
Detail Window
0.026 (0.66) 0.032 (0.81) 0.300 Ref. (7.62)
0.390 (9.91) 0.430 (10.92) 0.017 (0.43) 0.043 (0.58)
0.050 (1.27) 0.442 (11.23) 0.458 (11.63)
0.030 (0.762) 0.040 (1.02) 0.090 (2.29) 0.120 (3.05) 0.155 (3.94) 0.180 (4.57)
Detail
0.485 (12.32) 0.495 (12.58) 0.006 (0.15) 0.010 (0.25) 0.020 Min. (0.508)
0.035 (0.89)
0.008 (0.20)
Altera Corporation
Altera Device Package Information
28-Pin Plastic J-Lead Chip Carrier (PLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.14) (Bottom View) 0.042 (1.07) 0.056 (1.42) (Side View)
0.050 (1.27)
Detail
0.300 Ref. (7.62)
0.042 (1.07) 0.048 (1.22)
0.390 (9.91) 0.430 (10.92) 0.013 (0.33) 0.021 (0.53)
0.450 (11.43) 0.456 (11.58) 0.485 (12.32) 0.495 (12.57)
0.026 (0.66) 0.032 (0.81)
0.020 Min. (0.508) 0.090 (2.29) 0.120 (3.05) 0.165 (4.19) 0.180 (4.57)
Detail
0.010 Max. (0.254)
0.020 Min. (0.508)
0.025 (0.64) 0.040 (1.14)
Altera Corporation
Altera Device Package Information
32-Pin Plastic Thin Quad Flat Pack (TQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View) 0.002 (0.05) 0.006 (0.15)
0.05 Max. (1.27) 0.012 (0.30) 0.018 (0.45)
Detail
0.005 (0.135) 0.007 (0.180)
Detail
0.018 (0.45) 0.029 (0.75) 0.031 (0.80) 0.275 (7.00) 0.354 (9.00) 0.396 Ref. (1.00)
40-Pin Ceramic Dual In-Line Package (CerDIP)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View)
Window
0.550 0.040 (13.97 1.02) 0.090 Max. (2.29) 2.050 0.020 (52.07 0.51) (Side View) 0.005 Min. (0.127) (End View) 0.225 Max. (5.75) 0.610 0.010 (15.49 0.25)
0.025 0.010 (0.64 0.25)
0.010 0.002 (0.25 0.05) 0.100 (2.54) 0.057 0.008 (1.45 0.20) 0.125 Min. (3.18)
0.018 0.002 (0.46 0.05)
0.660 0.020 (16.76 0.51)
Altera Corporation
Altera Device Package Information
40-Pin Plastic Dual In-Line Package (PDIP)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.14) 0.055 (1.40) 0.020 Min. (0.508)
0.530 (13.46) 0.550 (13.97)
2.058 (52.27) 2.070 (52.58)
(0.508)
(End View) 0.165 (4.19) 0.190 (4.83) 0.600 (15.24) 0.625 (18.88) 0.020 Typ. (0.508) 0.008 (0.2) 0.012 (0.3)
0.145 (3.68) 0.155 (3.94)
(Side View)
0.020
Min.
0.100 (2.54) 0.015 (0.381) 0.020 (0.508)
0.120 (3.05) 0.130 (3.30)
0.610 (15.49) 0.660 (16.76)
Altera Corporation
Altera Device Package Information
44-Pin Ceramic J-Lead Chip Carrier (JLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.14) (Bottom View) (Side View)
Window
Detail
0.026 (0.66) 0.032 (0.81) 0.590 (14.99) 0.630 (16.00) 0.500 Ref. (12.70)
0.017 (0.43) 0.023 (0.58)
0.642 (16.31) 0.658 (16.71) 0.685 (17.40) 0.695 (17.65)
0.050 (1.27)
0.030 (0.76) 0.040 (1.02) 0.090 (2.29) 0.120 (3.05)
Detail
0.155 (3.94) 0.180 (4.57)
0.035 (0.089)
0.006 (0.15) 0.010 (0.25) 0.020 (0.508) Min.
0.008 (0.20)
Altera Corporation
Altera Device Package Information
44-Pin Plastic J-Lead Chip Carrier (PLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.14) (Bottom View) 0.500 Ref. (12.7) (Side View)
Detail
0.042 (1.07) 0.048 (1.22)
0.590 (14.99) 0.630 (16.00)
0.013 (0.33) 0.021 (0.53)
0.650 (16.51) 0.656 (16.66) 0.685 (17.39) 0.695 (17.65)
0.050 (1.27)
0.026 (0.66) 0.032 (0.81)
0.020 Min. (0.508) 0.090 (2.29) 0.120 (3.05) 0.165 (4.19) 0.180 (4.57)
Detail
0.010 Max. (0.254)
0.020 Min. (0.508)
0.025 (0.64) 0.045 (1.14)
Altera Corporation
Altera Device Package Information
44-Pin Plastic Quad Flat Pack (PQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Side View) 0.077 (1.95) 0.083 (2.10) (Top View)
0.0118 (0.30) 0.0177 (0.45)
0.096 Max. (2.45)
Detail
0.0315 (0.80)
0.390 (9.90) 0.398 (10.10) 0.510 (12.95) 0.530 (13.45) 0.0065 0.001 (0.165 0.035)
Detail
0.063 0.008 (1.6 0.2)
0.0315 0.007 (0.80 0.15)
0.0098 Min. (0.25)
Altera Corporation
Altera Device Package Information
44-Pin Plastic Thin Quad Flat Pack (TQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Side View) 0.00197 Min. (0.05) (Top View)
0.0118 (0.30) 0.0158 (0.40)
0.05 Max. (1.27)
Detail
0.0315 (0.80)
0.390 (9.90) 0.398 (10.10) 0.462 (11.75) 0.482 (12.25)
Detail
0.0035 (0.09) 0.0079 (0.20)
0.0180 (0.45) 0.0295 (0.75) 0.039 Ref. (1.00)
Altera Corporation
Altera Device Package Information
68-Pin Ceramic J-Lead Chip Carrier (JLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.045 (1.143) (Bottom View) (Side View)
Window
0.800 Ref. (20.32)
Detail
0.026 (0.66) 0.032 (0.81)
0.890 (22.61) 0.930 (23.62)
0.017 (0.43) 0.023 (0.58)
0.942 (23.93) 0.958 (24.33) 0.985 (25.02) 0.995 (25.27)
0.050 (1.27)
0.030 (0.762) 0.040 (1.02) 0.090 (2.29) 0.120 (3.05)
Detail
0.155 (3.94) 0.200 (5.08)
0.035 (0.889)
0.006 (0.15) 0.010 (0.25) 0.020 Min. (0.508)
0.008 (0.203)
Altera Corporation
Altera Device Package Information
68-Pin Plastic J-Lead Chip Carrier (PLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Bottom View) 0.042 (1.07) 0.056 (1.42) 0.042 (1.07) 0.048 (1.22) (Side View)
0.045 (1.143)
0.800 Ref. (20.32)
Detail
0.026 (0.660) 0.032 (0.813) 0.890 (22.61) 0.930 (23.62)
0.013 (0.330) 0.021 (0.533)
0.950 (24.13) 0.958 (24.33) 0.985 (25.00) 0.995 (25.27)
0.050 (1.27)
0.020 Min. (0.508) 0.090 (2.29) 0.130 (3.30)
Detail
0.165 (4.19) 0.200 (5.08)
0.010 Max. (0.254)
0.020 Min. (0.508)
0.025 (0.64) 0.045 (1.14)
Altera Corporation
Altera Device Package Information
68-Pin Small Outline Ceramic Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.120 0.020 (27.94 0.51) (Bottom View) 1.005 0.005 (25.53 0.13) 0.100 (2.54) 0.070 Dia. Typ. (1.78) 0.008 Ref. (0.20) 0.050 0.005 (1.27 0.13) 0.730 Max. (18.54) 0.127 0.013 (3.23 0.33) (Side View)
0.180 0.005 (4.57 0.13)
0.005 (0.13) 0.018 0.002 (0.457 0.05)
0.050 Dia. (1.27)
Window
Indicates location
Altera Corporation
Altera Device Package Information
84-Pin Ceramic J-Lead Chip Carrier (JLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Bottom View) (Side View)
0.045 (1.143)
Window
1.00 Ref. (25.4)
Detail
Indicates relative location
0.26 (0.66) 0.32 (0.81)
1.090 (27.69) 1.130 (28.70)
0.017 (0.432) 0.023 (0.584)
1.142 (29.01) 1.158 (29.41) 1.185 (30.10) 1.195 (30.35)
0.050 (1.27)
0.030 (0.762) 0.040 (1.02) 0.090 (2.29) 0.120 (3.05)
Detail
0.155 (3.94) 0.200 (5.08)
0.006 (0.15) 0.010 (0.25) 0.035 (0.889) 0.020 Min. (0.508) 0.008 (0.203)
Altera Corporation
Altera Device Package Information
84-Pin Plastic J-Lead Chip Carrier (PLCC)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Bottom View) (Side View) 0.042 (1.07) 0.056 (1.42) 0.045 (1.143) 0.042 (1.07) 0.048 (1.22)
Detail
Indicates relative location
1.090 (27.69) 1.130 (28.70)
0.013 (0.33) 0.021 (0.53)
1.150 (29.20) 1.158 (29.41) 1.185 (30.09) 1.195 (30.35)
0.050 (1.27) 1.00 Ref. (25.4)
0.026 (0.660) 0.032 (0.813)
0.020 Min. (0.508) 0.090 (2.29) 0.130 (3.30) 0.165 (4.19) 0.200 (5.08)
Detail
0.020 Min. (0.508)
0.010 Max. (0.254)
0.025 (0.64) 0.045 (1.14)
Altera Corporation
Altera Device Package Information
84-Pin Ceramic Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.120 0.020 (28.45 0.51) (Bottom View) 1.005 0.005 (25.53 0.13) 0.100 (2.54) 0.070 (1.78) Dia. Typ. 0.050 0.005 (1.27 0.13) 0.830 (21.08) Max. 0.050 Dia. (1.27) 0.127 0.013 (3.23 0.33) 0.180 0.005 (4.57 0.13) (Side View)
0.005 (0.127) Ref. 0.018 0.002 (0.457 0.05)
Window Indicates location
0.008 (0.20) Ref.
100-Pin Ceramic Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.320 0.020 (33.53 0.51) (Bottom View) 1.200 0.015 (30.48 0.30) 0.100 (2.54) 0.070 Dia. Typ. (1.79) 0.050 0.005 (1.27 0.13) 0.050 Dia. (1.27) 0.830 (21.08) Max. 0.005 Ref. (0.127) 0.018 0.002 (0.457 0.05) 0.127 0.013 (3.23 0.33) (Side View)
0.180 0.005 (4.57 0.13)
Window
Indicates location
0.008 Ref. (0.20)
Altera Corporation
Altera Device Package Information
100-Pin FineLine
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.425 (10.80) 0.441 (11.20) (Side View) 0.031 Typ. (0.785)
Indicates location Ball
0.025 Typ. (0.635)
(Bottom View) 0.040 Typ. (1.00) 0.040 Typ. (1.00)
0.083 (2.10)
0.040 Typ. (1.00)
0.040 Typ. (1.00)
Ball Corner
Altera Corporation
Altera Device Package Information
100-Pin Plastic Quad Flat Pack (PQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View) 0.134 Max. (3.40)
0.667 (16.95) 0.687 (17.44)
0.0098 Min. (0.25)
Detail Indicates location
0.904 (22.95) 0.923 (23.45) 0.0087 (0.22) 0.0150 (0.38)
(0.65)
0.783 (19.90) 0.791 (20.10)
0.0256
0.547 (13.90) 0.555 (14.10)
Detail
0.0256 (0.65) 0.0374 (0.95)
Altera Corporation
Altera Device Package Information
100-Pin Plastic Thin Quad Flat Pack (TQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View) 0.0020 (0.05) 0.0059 (0.15) 0.050 Max. (1.27)
Indicates location
0.0067 (0.17) 0.0106 (0.27)
Detail
0.0197 (0.50)
0.531 (13.50) 0.571 (14.50) 0.622 (15.80) 0.638 (16.20)
0.0295 (0.75)
Detail
0.0035 (0.09) 0.0079 (0.20)
0.0177 (0.45) 0.039 Ref. (1.00)
Altera Corporation
Altera Device Package Information
144-Pin Plastic Thin Quad Flat Pack (TQFP)
Controlling measurement millimeters, shown parenthesis. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View) 0.0020 (0.05) 0.0059 (0.15) 0.063 Max. (1.60)
Indicates location
0.0067 (0.17) 0.0106 (0.27)
Detail
0.0197 (0.50)
0.0295 (0.75) 0.787 (20.00) 0.866 (22.00)
Detail
0.0035 (0.09) 0.0079 (0.20)
0.0177 (0.45) 0.039 Ref. (1.00)
Altera Corporation
Altera Device Package Information
160-Pin Ceramic Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.560 0.020 (39.624 0.51) 1.250 0.012 (31.75 0.30) (Bottom View) (Side View) 0.140 0.020 (3.56 0.51) 0.090 0.010 (2.286 0.25) 0.180 (4.572)
1.400 0.012 (35.56 3.05) 0.100 (2.54) 0.050 (1.27) 0.070 Dia. Typ. (1.79)
0.018 0.002 Dia. (0.457 0.05)
0.050 Dia. (1.27)
Indicates location
Orientation Index
0.008 Ref. (0.203)
Altera Corporation
Altera Device Package Information
160-Pin Plastic Quad Flat Pack (PQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View) 0.160 Max. (4.07) 0.0150 Chamfer (0.38) Typ. Places) 0.010 Min. (0.25)
0.060 (1.52)
Indicates location
Detail
0.009 (0.22) 0.015 (0.38) 0.998 Ref. (25.35)
0.0256 (0.65)
1.098 (27.90) 1.106 (28.10) 1.219 (30.95) 1.238 (31.45)
0.125 (3.17) 0.144 (3.67)
Detail
0.0045 (0.1143) 0.0250 Min. (0.635)
0.020 (0.508) 0.030 (0.762)
Altera Corporation
Altera Device Package Information
192-Pin Ceramic Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Bottom View) 1.760 0.018 (45.15 0.46) 1.600 0.015 (41.03 0.38) (Side View) 0.142 0.015 (3.64 0.38) 0.085 0.004 (2.18 0.10) 0.180 0.010 (4.62 0.25) 0.005 (0.128) 0.018 0.002 Dia. (0.457 0.05)
0.100 (2.54)
0.070 Dia. Typ. (1.79)
0.050 Dia. (1.28)
(Top View) 0.050 0.005 (1.28 0.13) 0.008 Ref. (0.203)
Indicates location
1.450 0.010 (3.68 0.25)
Indicates location
Altera Corporation
Altera Device Package Information
196-Pin FineLine
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.583 (14.80) 0.598 (15.20) 0.040 Typ. (1.00)
(Bottom View) 0.040 Typ. (1.00)
(Side View)
Ball Corner
0.031 Typ. (0.785) 0.025 Typ. (0.635) 0.040 Typ. (1.00)
Indicates Location Ball
0.040 Typ. (1.00)
0.083 Max. (2.10)
Altera Corporation
Altera Device Package Information
208-Pin Plastic Quad Flat Pack (PQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View)
0.161 (4.10) Max.
0.060 (1.52)
1.195 (30.35)
0.126 (3.20) 0.142 (3.60)
0.010 Min. (0.25)
1.098 (27.90) 1.106 (28.10)
Indicates location Detail
0.0067 (0.17) 0.0106 (0.27)
0.0197 (0.50)
0.015 Chamfer (0.38) Typ. Places)
Detail
0.0045 (0.1143)
0.020 (0.50) 0.030 (0.75) 0.016 Min. (0.40)
Altera Corporation
Altera Device Package Information
208-Pin Power Quad Flat Pack (RQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats. Metal heat sink shown side view.
(Top View) 1.195 (30.35) 1.215 (30.85) 1.098 (27.90) 1.106 (28.10) 0.060 (1.52) 0.161 Max. (4.10) 0.126 (3.20) 0.142 (3.60) 0.010 Min. (0.25) (Side View)
Indicates location
Detail
0.0067 (0.17) 0.0106 (0.27)
Metal Heat Sink
0.0197 (0.50)
0.015 Chamfer (0.38) Typ. Places)
Detail
0.0045 (0.1143)
0.018 (0.46) 0.026 (0.66) 0.025 Min. (0.635)
Altera Corporation
Altera Device Package Information
225-Pin Ball-Grid Array (BGA)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.056 (26.80) 1.071 (27.20) 0.94 (24.00) 0.97 (24.70) 0.118 (3.00) Ref. 0.0591 Typ. (1.50) (Bottom View)
Indicates location
0.024 (0.60) 0.035 (0.90)
0.32 Ref. (8.05)
Chamfer Places)
0.039 (1.0) Ref.
(Side View)
0.020 (0.50) 0.028 (0.70)
0.045 (1.15) 0.049 (1.25)
0.079 (2.00) 0.091 (2.30)
0.012 (0.31) 0.016 (0.41)
Altera Corporation
Altera Device Package Information
232-Pin Ceramic Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.760 0.018 (44.70 0.46) 1.450 0.012 (36.83 0.30) 0.142 0.008 (3.61 0.20) (Side View)
0.090 0.009 (2.286 0.228)
Indicates location
0.018 0.002 (0.457 0.050)
0.050 0.005 Places) (1.27 0.127)
0.010 (0.25) 0.050 0.005 (1.27 0.127) (Bottom View) 1.600 0.010 (40.64 0.254) 0.070 0.100 Dia. Typ. (1.778) (2.54)
0.070 Index (1.778)
0.008 Ref. (0.20) 0.180 0.010 (4.572 0.254)
0.020 (0.51) Places)
Indicates location
Altera Corporation
Altera Device Package Information
240-Pin Plastic Quad Flat Pack (PQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.161 Max. (4.10) 1.352 (34.35) 1.372 (34.85) 1.256 (31.90) 1.264 (32.10) 0.130 (3.30) 0.138 (3.50) 0.010 Min. (0.25) (Side View)
0.060 (1.52)
Indicates location
Detail
0.0067 (0.17) 0.0106 (0.27)
0.0197 (0.50)
0.015 Chamber (0.38) Typ. Places)
Detail
0.0045 (0.1143)
0.018 (0.46) 0.026 (0.66) 0.016 Min. (0.40)
Altera Corporation
Altera Device Package Information
240-Pin Power Quad Flat Pack (RQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats. Metal heat sink shown side view.
(Top View) 0.161 Max. (4.10) 1.352 (34.35) 1.372 (34.85) 1.256 (31.90) 1.264 (32.10) 0.130 (3.30) 0.138 (3.50) 0.010 Min. (0.25) (Side View)
0.060 (1.52)
Indicates location
Detail
0.0067 (0.17) 0.0106 (0.27)
Metal Heat Sink
0.0197 (0.50)
0.015 Chamfer (0.38) Typ. Places)
Detail
0.0045 (0.1143)
0.018 (0.46) 0.026 (0.66) 0.016 Min. (0.40)
Altera Corporation
Altera Device Package Information
256-Pin FineLine
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.661 (16.80) 0.667 (17.20) 0.040 Typ. (1.00)
(Bottom View)
(Side View)
0.040 Typ. (1.00)
0.040 Typ. (1.00)
0.031 Typ. (0.785)
Indicates location
0.025 Typ. (0.635)
0.040 Typ. (1.00)
0.083 Max. (2.10)
Altera Corporation
Altera Device Package Information
256-Pin Ball-Grid Array (BGA)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats. Metal heat sink shown side view.
(Top View) (Bottom View)
1.056 (26.80) 1.071 (27.20)
Corner
0.94 (24.00) 0.97 (24.70) 0.32 Ref. (8.05) 0.024 (0.60) 0.035 (0.90)
Corner
Indicates location
0.05 (1.27)
Chamfer (all corners)
0.057 Ref. (1.44)
(Side View)
0.057 Ref. (1.44)
0.019 (0.50)
(for corners)
0.079 (2.00) 0.020 (0.50) 0.091 (2.30) 0.028 (0.70)
0.012 (0.31) 0.016 (0.41)
0.045 (1.15) 0.049 (1.25)
Altera Corporation
Altera Device Package Information
280-Pin Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View)
1.960 0.018 (49.78 0.457) 1.650 0.012 (41.91 0.30) 0.135 0.010 (3.43 0.254)
0.088 0.007 (2.24 0.178)
Indicates location
0.018 0.002 (0.457 0.050)
0.050 0.005 Places) (1.27 0.127)
0.010 (0.25)
(Bottom View)
0.020 (0.5) Places)
1.800 0.010 (45.72 0.254) 0.070 0.100 Dia. Typ. Typ. (1.778) (2.54)
0.050 0.005 (1.27 0.127)
0.008 Ref. (0.20) 0.180 0.010 (4.572 0.254)
Indicates quadrant containing location
Altera Corporation
Altera Device Package Information
304-Pin Power Quad Flat Pack (RQFP)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats. Metal heat sink shown side view.
(Top View) 0.177 Max. (4.50) 0.146 (3.70) 0.154 (3.90) 0.010 Min. (0.25) (Side View)
1.667 (42.35) 1.687 (42.85) 1.571 (39.90) 1.579 (40.10)
Indicates location Detail
0.0067 (0.17) 0.0106 (0.27)
Metal Heat Sink
0.0197 (0.50)
Detail
0.004 (0.09) 0.008 (0.20) 0.051 Ref. (1.30)
0.016 Min. (0.40)
0.016 (0.40) 0.024 (0.60)
Altera Corporation
Altera Device Package Information
324-Pin FineLine
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats. Metal heat sink shown side view.
(Top View) 0.740 (18.80) 0.756 (19.20) 0.040 Typ. (1.00)
(Bottom View)
(Side View)
0.040 Typ. (1.00)
Ball Corner
0.031 Typ. (0.785)
Indicates Location Ball
0.040 Typ. (1.00)
0.025 Typ. (0.635)
0.040 Typ. (1.00) 0.083 Max. (2.10)
Altera Corporation
Altera Device Package Information
356-Pin Ball-Grid Array (BGA)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.38 0.0039 (35.00 0.10) (Bottom View)
1.25 0.0039 (31.75 0.10)
0.030 0.0059
Indicates location
(0.75 0.15)
0.050 Typ. (1.27)
(Side View)
0.034 0.0024 (0.87 0.06)
0.059 0.0051 (1.50 0.13)
0.025 0.0028 (0.63 0.07)
Altera Corporation
Altera Device Package Information
403-Pin Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parenthesis, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) (Side View) 0.050 0.005 (1.27 0.127) 0.008 Typ. (0.20) 0.050 Dia. Typ. (1.27)
1.960 0.019 (49.78 0.48)
Indicates location
0.018 0.002 Dia. (0.46 0.05)
0.090 0.009 (2.29 0.229) (Bottom View) 1.800 (45.72) 0.180 0.010 (4.572 0.254)
0.100 (2.54) 0.050 (1.27)
Standoff Places)
Indicates location (not pin)
0.020 Rad. Typ. (0.51) Places)
Altera Corporation
Altera Device Package Information
484-Pin FineLine
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 0.898 (22.80) 0.913 (23.20)
(Side View)
0.060 (1.50)
Typ.
Indicates location
0.025 Typ. (0.635)
0.083 Max. (2.10) (Bottom View) 0.040 Typ. (1.00)
0.040 Typ. (1.00)
0.040 Typ. (1.00)
0.040 Typ. (1.00)
Altera Corporation
Altera Device Package Information
503-Pin Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 2.260 0.015 (57.40 0.381) 1.600 0.012 (40.64 0.304) 1.500 0.010 (38.10 0.254) 0.145 Max. (3.68) 0.050 Dia. Typ. (1.27) (Side View)
0.180 0.010 (4.572 0.254)
Indicates location (not pin)
0.018 0.002 Dia. (0.46 0.051)
0.038 (0.966) 0.048 (1.22) 0.050 0.005 (1.27 0.127) 0.008 0.005 (0.20 0.127)
(Bottom View) 2.100 (53.34) 1.095 0.011 (27.81 0.279)
0.100 (2.54)
0.050 (1.27)
1.334 0.014 (33.88 3.56)
Standoff Places)
Indicates quadrant containing location
0.020 Rad. Typ. (0.51) Places)
Altera Corporation
Altera Device Package Information
599-Pin Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats. Metal heat sink shown side view.
(Top View) 2.46 0.015 (62.484 0.381) 0.012 (40.64 0.3048) 0.01 (38.1 0.254) 0.145 Max. (3.683) 0.05 Dia. Typ. (1.27) 0.18 0.01 (4.572 0.254) (Side View)
Indicates location (not pin)
0.018 0.002 Dia. (0.4572 0.0508)
(Bottom View) 2.30 (58.42) 1.015 0.01 (25.781 0.254)
0.04 (1.016) 0.05 0.005 (1.27 0.127) (2.54) 0.05 (1.27)
0.008 0.005 (0.2032 0.127)
1.45 0.015 (36.83 0.381)
Standoff Places)
Indicates quadrant containing location
Altera Corporation
Altera Device Package Information
600-Pin Ball-Grid Array (BGA)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats. Metal heat sink shown side view.
(Top View)
1.768 (44.90) 1.776 (45.10)
Ball Corner Indicates location
(Bottom View)
0.024 (0.60) 0.035 (0.90)
1.696 (43.08) 1.704 (43.28)
0.05 (1.27)
0.054 (1.37) 0.064 (1.63)
0.043 (1.09) 0.048 (1.23) (Side View)
0.0220 (0.56) 0.0276 (0.70)
Altera Corporation
Altera Device Package Information
652-Pin Ball-Grid Array (BGA)
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View)
1.768 (44.90) 1.776 (45.10)
Ball Corner Indicates location
(Bottom View)
0.024 (0.60) 0.035 (0.90)
1.696 (43.08) 1.704 (43.28)
0.05 (1.27)
0.059 0.0028 (1.50 0.13)
0.0234 0.0024 (0.87 0.061)
(Side View)
0.025 0.0028 (0.63 0.07)
Altera Corporation
Altera Device Package Information
655-Pin Pin-Grid Array (PGA)
Controlling measurement inches. Millimeter measurements, shown parentheses, reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 2.460 .015 (62.48 0.38) 1.600 .012 (40.54 0.31) 1.500 .010 (38.1 0.25) .050 .005 0.27 0.13 (Side View)
.180 .005 0.20 0.13 .008 .005 0.20 0.13
.005 Dia. (1.27)
0.002 Dia. 0.46 0.05
Indicates location (not pin)
.040 (3.68)
.145 Max. (3.68)
(Bottom View) 0.10 (2.54)
.050 (1.27)
Indicates quadrant containing location
2.30 (58.42)
Altera Corporation
Altera Device Package Information
672-Pin FineLine
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.056 (26.80) 1.071 (27.20) (Side View)
0.060 (1.50)
Typ.
Indicates location Ball
0.025 Typ. (0.635)
0.083 Max. (2.10) (Bottom View) 0.080 Typ. (2.00)
0.040 Typ. (1.00)
0.080 Typ. (2.00)
0.040 Typ. (1.00)
Ball Corner
Altera Corporation
Altera Device Package Information
Figure 672-Pin Thermally Enhanced FineLine
Note
Controlling measurement millimeters, shown parentheses. Inch measurements reference only. "Dimension Formats" page this data sheet dimension formats.
(Top View) 1.056 (26.80) 1.071 (27.20) (Side View)
0.103 (2.60)
Typ.
Indicates location Ball
0.025 Typ. (0.635)
0.138 (3.5)
Max.
(Bottom View)
0.040 Typ. (1.00)
Ball Corner
0.080 Typ. (2.00)
0.080 Typ. (2.00)
0.040 Typ. (1.00)
Note:
Only available APEX devices.
Altera Corporation
Copyright 1995, 1996, 1997, 1998, 1999 Altera Corporation, Innovation Drive, Jose, 95134, USA, rights reserved. accessing this information, agree bound terms Altera's Legal Notice.

August 1999, ver. Introduction This data sheet provides foll

Top Searches for this datasheet

Other recent searches