Revision 1.0, March 2004 Part Number 82-000770-01 Copyright Infor

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Revision 1.0, March 2004 Part Number 82-000770-01 Copyright Infor

Datasheet Thumbnail

Top Searches for this datasheet

ADSP-TS201S EZ-KIT Lite® Evaluation System Manual
Revision 1.0, March 2004 Part Number 82-000770-01
Copyright Information
2004 Analog Devices, Inc., RIGHTS RESERVED. This document reproduced form without prior, express written consent from Analog Devices, Inc. Printed USA.
Limited Warranty
EZ-KIT Lite evaluation system warranted against defects materials workmanship period year from date purchase from Analog Devices from authorized dealer.
Disclaimer
Analog Devices, Inc. reserves right change this product without prior notice. Information furnished Analog Devices believed accurate reliable. However, responsibility assumed Analog Devices use; infringement patents other rights third parties which result from use. license granted implication otherwise under patent rights Analog Devices, Inc.
Trademark Service Mark Notice
Analog Devices logo, TigerSHARC, TigerSHARC logo, VisualDSP++, VisualDSP++ logo, CROSSCORE, CROSSCORE logo, EZ-KIT Lite registered trademarks Analog Devices, Inc. other brand product names trademarks service marks their respective owners.
Regulatory Compliance
ADSP-TS201S EZ-KIT Lite evaluation system been certified comply with essential requirements European directive 89/336/EEC (inclusive 93/68/EEC) and, therefore, carries "CE" mark. ADSP-TS201S EZ-KIT Lite evaluation system been appended Technical Construction File referenced "DSPTOOLS1" dated December 1997 awarded Certification appointed European Competent Body listed below. Technical Certificate Z600ANA1.019 Issued
Technology International (Europe) Limited Shrivenham Hundred Business Park Shrivenham, Swindon, 8TZ,
EZ-KIT Lite evaluation system contains (electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate human body equipment discharge without detection. Permanent damage occur devices subjected high-energy discharges. Proper precautions recommended avoid performance degradation loss functionality. Store unused EZ-KIT Lite boards protective shipping package.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
CONTENTS
PREFACE
Purpose This Manual Intended Audience Manual Contents xiii What's This Manual xiii Technical Customer Support Supported Processors Product Information MyAnalog.com Embedded Processor Product Information Related Documents Online Documentation xvii Printed Manuals xviii VisualDSP++ Documentation xviii Hardware Manuals xviii Data Sheets xviii Contacting Publications Notation Conventions
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
CONTENTS
GETTING STARTED
Contents EZ-KIT Lite Package Configuration Installation Tasks Installing VisualDSP++ EZ-KIT Lite Software Installing Registering VisualDSP++ EZ-KIT Lite License Setting EZ-KIT Lite Hardware Installing EZ-KIT Lite Driver Windows Driver Windows 2000 Driver 1-12 Windows Driver 1-13 Verifying Driver Installation 1-15 Starting VisualDSP++ 1-16
USING EZ-KIT LITE
EZ-KIT Lite License Restrictions Memory Using SDRAM Interface Using Flash Memory Using Programmable FLAG Pins Using Interrupt Pins Using Audio Interface Using Processor Link Ports Example Programs
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
CONTENTS
Using Flash Programmer Utility
EZ-KIT LITE HARDWARE REFERENCE
System Architecture External Port Expansion Interface JTAG Emulation Port Switch Settings Audio Amplification Selection (SW1) Processor Mode Selections (SW2) Processor Boot Strap Settings SYSCON/SDRCON Mode Settings Interrupt Enable Settings Link Port Width Settings FLAGs IRQs Switch Settings (SW10) Configuration Resistors 3-10 Processor Settings 3-10 Clock Mode Settings 3-12 Control Impedance Selection 3-14 Drive Strength Selection 3-15 LEDs Push Buttons 3-16 Power (LED1) 3-16 Reset LEDs (LED2 LED8) 3-17 FLAG LEDs (LED3-6) 3-17 Monitor (LED9) 3-17
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
CONTENTS
Programmable FLAG Push Buttons (SW6-9) 3-18 Interrupt Push Buttons (SW4 SW5) 3-18 Reset Push Button (SW3) 3-19 Connectors 3-19 Audio (P1-2) 3-20 Power (P3) 3-20 JTAG (P4) 3-21 (P5) 3-21 Expansion Interface (J1-3) 3-21 Link Ports (J4-7) 3-22 Specifications 3-22 Power Supply 3-22
BILL MATERIALS INDEX
viii
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
PREFACE
Thank purchasing ADSP-TS201S EZ-KIT Lite®, Analog Devices (ADI) evaluation system TigerSHARC® floating-point embedded processors. TigerSHARC processor Static Super Scalar (SSS) architecture targeted software-defined radio applications. these wireless infrastructure applications, TigerSHARC processor replacing field-programmable gate arrays (FPGAs) Chip Rate processing applications third generation cellular. performance, flexibility, multiprocessing capabilities TigerSHARC processor makes superior FPGA implementations. evaluation board designed used conjunction with VisualDSP++® development environment test capabilities ADSP-TS201S TigerSHARC processor. VisualDSP++ development environment gives ability perform advanced application code development debug, such Create, compile, assemble, link application programs written C++, ADSP-TS201S assembly Load, run, step-in, step-out, step-over, halt, breakpoints application program Read write data program memory Read write core peripheral registers Plot memory
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Access ADSP-TS201S processor from personal computer (PC) achieved through port optional JTAG emulator. interface gives unrestricted access ADSP-TS201S processor evaluation board peripherals. Analog Devices JTAG emulators offer faster communication between host target hardware. Analog Devices carries wide range in-circuit emulation products. learn more about Analog Devices emulators processor development tools, ADSP-TS201S EZ-KIT Lite provides example programs demonstrate capabilities evaluation board. VisualDSP++ license provided with this EZ-KIT Lite evaluation system limits size user program's code 128K words. board features: Analog Devices ADSP-TS201S processors Core Clock Speed Configurable Core Clock Mode Analog Devices AD1871 Analog-to-Digital Converter Line-In Stereo Jack Analog Devices AD1854 Digital-to-Analog Converter Line-Out Stereo Jack SDRAM Memory Flash Memory 512K Main Flash Memory Debugging Interface
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Preface
Interface Connectors 14-Pin Emulator Connector JTAG Interface LVDS Link Ports RJ-45 Connectors Expansion Interface Connectors (not populated) General-Purpose Push Button FLAGS (two each processor) Push Button Interrupts (one each processor) FLAG Outputs (two each processor) Analog Devices ADP3331, ADP3336, ADP3339 Voltage Regulation EZ-KIT Lite board contains external memories: Flash memory SDRAM. Flash memory used store user-specific boot code. configuring boot mode switch (SW2) programming Flash memory, board stand-alone unit. SDRAM shared both processors used store data external processors. more information, "Memory Map" page 2-2. EZ-KIT Lite board contains audio interface, facilitating creation audio signal processing applications. Additionally, EZ-KIT Lite board provides expansion connectors, allowing connect processor's external port (EP).
Purpose This Manual
ADSP-TS201S EZ-KIT Lite Evaluation System Manual provides instructions using hardware installing software your manual provides guidelines running your code ADSP-TS201S EZ-KIT Lite. This manual also describes operation
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Intended Audience
configuration components evaluation board. Finally, schematic bill materials provided reference future ADSP-TS201S board designs.
Intended Audience
This manual user's guide reference ADSP-TS201S EZ-KIT Lite evaluation system. Programmers familiar with Analog Devices TigerSHARC processor architecture, operation, programming primary audience this manual. Programmers unfamiliar with Analog Devices TigerSHARC processors this manual conjunction with ADSP-TS201 TigerSHARC Processor Hardware Reference ADSP-TS201 TigerSHARC Processor Programming Reference, which describe processor architecture instruction set. Programmers unfamiliar with VisualDSP++ should refer VisualDSP++ online Help VisualDSP++ user's getting started guides. locations these documents, refer "Related Documents".
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Preface
Manual Contents
manual consists Chapter "Getting Started" page Provides software hardware installation procedures, system requirements, basic board information. Chapter "Using EZ-KIT Lite" page Provides information EZ-KIT Lite from programmer's perspective outlines board's memory map. Chapter "EZ-KIT Lite Hardware Reference" page Provides information hardware aspects EZ-KIT Lite. Appendix "Bill Materials" page Provides list components used manufacture EZ-KIT Lite board. Appendix "Schematics" page Provides resources allow making modifications EZ-KIT Lite reference design. This appendix part online Help. online Help viewers should version ADSP-TS201S EZ-KIT Lite Evaluation System Manual located Docs\EZ-KIT Lite Manuals folder installation schematics.
What's This Manual
This first edition ADSP-TS201S EZ-KIT Lite Evaluation System Manual. manual documents hardware tools support ADSP-TS201S TigerSHARC processors.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
xiii
Technical Customer Support
Technical Customer Support
reach Tools Support following ways. Visit Development Tools website
Email questions
dsptools.support@analog.com
Phone questions 1-800-ANALOGD Contact your local sales office authorized distributor Send questions mail
Analog Devices, Inc. Division Technology P.O. 9106 Norwood, 02062-9106
Supported Processors
ADSP-TS201S EZ-KIT Lite evaluation system supports ADSP-TS201S TigerSHARC Analog Devices embedded processors.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Preface
Product Information
obtain product information from Analog Devices website, from product CD-ROM, from printed publications (manuals). Analog Devices online www.analog.com. website provides information about broad range products-analog integrated circuits, amplifiers, converters, embedded processors.
MyAnalog.com
MyAnalog.com free feature Analog Devices website that allows customization webpage display only latest information products interested also choose receive weekly email notification containing updates webpages that meet your interests. MyAnalog.com provides access books, application notes, data sheets, code examples, more. Registration: Visit www.myanalog.com sign Click Register MyAnalog.com. Registration takes about five minutes serves means select information want receive. already registered user, just Your user name your email address.
Embedded Processor Product Information
information embedded processors, visit website www.analog.com/processors, which provides access technical publications, data sheets, application notes, product overviews, product announcements.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Product Information
also obtain additional information about Analog Devices products following ways. Email questions requests information
dsp.support@analog.com
questions requests information 1-781-461-3010 (North America) 76903-157 (Europe)
Related Documents
information product related development software, following publications. Table Related Processor Publications
Title ADSP-TS201S Embedded Processor Datasheet ADSP-TS201 TigerSHARC Processor Hardware Reference ADSP-TS201 TigerSHARC Processor Programming Reference Description General functional description, pinout, timing Description internal processor architecture register functions Description allowed processor assembly instructions
Table Related VisualDSP++ Publications
Title Description
VisualDSP++ User's Guide 32-Bit Proces- Detailed description VisualDSP++ feasors tures usage VisualDSP++ Assembler Preprocessor Manual TigerSHARC Processors VisualDSP++ C/C++ Complier Library Manual TigerSHARC Processors Description assembler function commands TigerSHARC processors Description complier function commands TigerSHARC processors
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Preface
Table Related VisualDSP++ Publications (Cont'd)
Title VisualDSP++ Linker Utilities Manual 32-Bit Processors VisualDSP++ Loader Manual 32-Bit Processors Description Description linker function commands 32-bit processors Description loader function commands 32-bit processors
listed documents found through online Help Docs folder your VisualDSP++ installation. Most documents available printed form. plan EZ-KIT Lite board conjunction with JTAG emulator, refer documentation that accompanies emulator.
Online Documentation
Your software installation includes online Help part Windows® interface. These help files provide information about VisualDSP++ ADSP-TS201S EZ-KIT Lite evaluation system. view VisualDSP++ Help, click Help menu item Windows task bar, select Start->Programs->Analog Devices->VisualDSP++ 32-bit Processors->VisualDSP++ Documentation. view ADSP-TS201S EZ-KIT Lite Help, which part VisualDSP++ Help system, Contents Help window select Manuals->ADSP-TS201S EZ-KIT Lite. more documentation, please
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
xvii
Product Information
Printed Manuals
general questions regarding literature ordering, call Literature Center 1-800-ANALOGD (1-800-262-5643) follow prompts. VisualDSP++ Documentation Printed copies VisualDSP++ manuals purchased through Analog Devices Customer Service 1-781-329-4700; Customer Service representative. manuals purchased only kit. additional information, call 1-603-883-2430. have account with Analog Devices, will referred Analog Devices distributors. information distributors, onto Hardware Manuals Printed copies hardware reference instruction reference manuals ordered through Literature Center downloaded from Analog Devices website. phone number 1-800-ANALOGD (1-800-262-5643). manuals ordered title product number located back cover each manual. Data Sheets data sheets downloaded from Analog Devices website. general rule, printed copies data sheets with letter suffix obtained from Literature Center 1-800-ANALOGD (1-800-262-5643) downloaded from website. Data sheets without suffix downloaded from website only-no hard copies available. data sheet part name product number.
xviii
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Preface
want have data sheet faxed you, phone number that service 1-800-446-6212. Follow prompts list data sheet code numbers will faxed you. Call Literature Center first find requested data sheets available.
Contacting Publications
Please send your comments recommendations improve manuals online Help. contact emailing dsp.techpubs@analog.com.
Notation Conventions
following table identifies describes text conventions used this manual. Additional conventions, which apply only specific chapters, appear throughout this document.
Example Close command (File menu)
{this that}
Description Text bold style indicates location item within VisualDSP++ environment's boards' menu system user interface items. Alternative required items syntax descriptions appear within curly brackets separated vertical bars; read example this that. Optional items syntax descriptions appear within brackets separated vertical bars; read example optional this that. Optional item lists syntax descriptions appear within brackets delimited commas terminated with ellipsis; read example optional comma-separated list this. Registers, connectors, pins, commands, directives, keywords, code examples, feature names text with letter gothic font. Non-keyword placeholders appear text with italic style format.
[this that]
[this,.]
PF9-0
filename
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Notation Conventions
Example Note:
Description note providing information special interest identifying related topic. online version this book, word Note appears instead symbol. caution providing information about critical design programming issues that influence operation product. online version this book, word Caution appears instead symbol.
Caution:
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
GETTING STARTED
This chapter provides information need begin using ADSP-TS201S EZ-KIT Lite evaluation system. correct operation, install software hardware order presented "Installation Tasks" page 1-3. chapter includes following sections. "Contents EZ-KIT Lite Package" page Provides list components shipped with EZ-KIT Lite evaluation system. Configuration" page Describes minimum requirements work with EZ-KIT Lite evaluation system. "Installation Tasks" page Provides step-by-step procedures setting EZ-KIT Lite hardware software.
Contents EZ-KIT Lite Package
Your ADSP-TS201S EZ-KIT Lite package contains following items. ADSP-TS201S EZ-KIT Lite board EZ-KIT Lite Quick Start Guide VisualDSP++ Installation Quick Reference Card
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Contents EZ-KIT Lite Package
ADSP-TS201S EZ-KIT Lite Evaluation System Manual (this document) containing: VisualDSP++ 32-bit processors with limited license ADSP-TS201 EZ-KIT Lite debug software driver files Example programs Universal 7.5V power supply type cable Registration card (please fill return) item missing, contact vendor where purchased your EZ-KIT Lite contact Analog Devices, Inc.
EZ-KIT Lite evaluation system contains (electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate human body equipment discharge without detection. Permanent damage occur devices subjected high-energy discharges. Proper precautions recommended avoid performance degradation loss functionality. Store unused EZ-KIT Lite boards protective shipping package.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
Configuration
correct operation VisualDSP++ software EZ-KIT Lite, your computer must have minimum configuration:
Windows Windows 2000, Windows Intel comparable) processor Monitor color video card 2-button mouse free hard drive Full-speed port CD-ROM Drive
EZ-KIT Lite does under Windows Windows unless using JTAG emulator.
Installation Tasks
following task list provided safe effective installation ADSP-TS201S EZ-KIT Lite. Follow these instructions presented order ensure correct operation your software hardware. VisualDSP++ EZ-KIT Lite software installation VisualDSP++ EZ-KIT license installation registration EZ-KIT Lite hardware setup EZ-KIT Lite driver installation
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Installation Tasks
driver installation verification VisualDSP++ startup
Installing VisualDSP++ EZ-KIT Lite Software
This EZ-KIT Lite comes with latest version VisualDSP++ 32-bit processors. VisualDSP++ installation includes EZ-KIT Lite installations. install VisualDSP++ EZ-KIT Lite software: Insert VisualDSP++ installation into CD-ROM drive. Autoplay enabled your Install Shield Wizard Welcome screen. Otherwise, choose from Start menu, enter D:\ADI_Setup.exe Open field, where name your local CD-ROM drive. Follow on-screen instructions continue installing software. Custom Setup screen, select your EZ-KIT Lite from list available systems choose installation directory. Click icon Feature Description field selected system's description. When have finished, click Next. Ready Install screen, click Back change your install options, click Install install software, click Cancel exit install. When EZ-KIT Lite installs, Wizard Completed screen appears. Click Finish.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
Installing Registering VisualDSP++ EZ-KIT Lite License
VisualDSP++ EZ-KIT Lites licensed products. only copy software each license purchased. Once copy VisualDSP++ EZ-KIT Lite software installed your must install, register, validate your licence. VisualDSP++ Installation Quick Reference Card included your package will guide through licence installation registration process (refer Tasks
Setting EZ-KIT Lite Hardware
EZ-KIT Lite evaluation system contains (electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate human body equipment discharge without detection. Permanent damage occur devices subjected high-energy discharges. Proper precautions recommended avoid performance degradation loss functionality. Store unused EZ-KIT Lite boards protective shipping package.
ADSP-TS201S EZ-KIT Lite board designed outside your personal computer stand-alone unit. have open your computer case. connect EZ-KIT Lite board: Remove EZ-KIT Lite board from package. careful when handling boards avoid discharge static electricity, which damage some components. Figure shows default jumper settings, switches, connector locations, LEDs used installation.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Installation Tasks
Confirm that your board default configuration (Figure 1-1) before going step
Figure 1-1. EZ-KIT Lite Hardware Setup Plug provided power supply into EZ-KIT Lite board. Verify that green power (LED1) Also verify that RESET (LED8) RESET (LED2) LEDs quickly then off.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
While board booting, processor RESET (LED8) stays lit. Once turns off, connect cable available full-speed port ADSP-TS201S EZ-KIT Lite board. Follow driver installation instructions "Installing EZ-KIT Lite Driver".
Installing EZ-KIT Lite Driver
EZ-KIT Lite evaluation system requires full-speed port. driver installed following platforms. Windows described page 1-8. Windows 2000, described page 1-12. Windows described page 1-13. driver used debug agent Microsoft certified because intended development laboratory environment, commercial environment.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Installation Tasks
Windows Driver Before using ADSP-TS201S EZ-KIT Lite first time, Windows driver must installed. install driver: Insert into CD-ROM drive. connection ADSP-TS201S EZ-KIT Lite evaluation board port activates Windows Hardware Wizard shown Figure 1-2.
Figure 1-2. Windows Hardware Wizard Click Next.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
Select Search best driver your device, shown Figure 1-3.
Figure 1-3. Windows Searching Driver Click Next. Select CD-ROM drive, shown Figure 1-4.
Figure 1-4. Windows Searching CD-ROM ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Installation Tasks
Click Next. Windows locates WmUSBEz.inf file installation shown Figure 1-5.
Figure 1-5. Windows Locating Driver Click Next. Copying Files dialog appears (Figure 1-6).
Figure 1-6. Windows Searching .SYS File
1-10
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
Click Browse. Open dialog box, shown Figure 1-7, appears screen.
Figure 1-7. Windows Opening .SYS File Drives, select your CD-ROM drive. Click Copying Files dialog (Figure 1-8) appears.
Figure 1-8. Windows Copying .SYS File
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
1-11
Installation Tasks
Click driver installation complete, shown Figure 1-9.
Figure 1-9. Windows Completing Software Installation Click Finish exit wizard. Verify installation following instructions "Verifying Driver Installation" page 1-15. Windows 2000 Driver VisualDSP++ installation software pre-installs necessary drivers selected EZ-KIT Lite. install also upgrades older driver such detected system. Prior running VisualDSP++ installer, ensure there other Hardware Wizard windows running background. there wizard windows running, close them before starting installer.
1-12
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
install driver: VisualDSP++ already installed your system, step Otherwise, VisualDSP++ installation. Refer VisualDSP++ Installation Quick Reference Card detailed installation description. When installing VisualDSP++ Windows 2000, ensure appropriate EZ-KIT Lite component selected installation. Connect EZ-KIT Lite device your PC's port. Windows 2000 automatically detects EZ-KIT device automatically installs appropriate driver selected device (see step Verify installation following instructions "Verifying Driver Installation" page 1-15. Windows Driver VisualDSP++ installation software pre-installs necessary drivers selected EZ-KIT Lite. install also upgrades older driver such detected system. Prior running VisualDSP++ installer, ensure there other Hardware Wizard windows running background. there wizard windows running, close them before starting installer. install driver: VisualDSP++ already installed your system, step Otherwise, VisualDSP++ installation. Refer VisualDSP++ Installation Quick Reference Card detailed installation description. When installing VisualDSP++ Windows ensure appropriate EZ-KIT Lite component selected installation.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
1-13
Installation Tasks
Connect EZ-KIT Lite device your PC's port. connecting device port activate Windows Found Hardware Wizard, shown Figure 1-10.
Figure 1-10. Windows Found Hardware Wizard Select Install software automatically (Recommended) click Next. When Windows completes driver installation selected device (see step window shown Figure 1-11 appears screen.
Figure 1-11. Windows Completing Driver Installation 1-14 ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
Verify installation following instructions "Verifying Driver Installation".
Verifying Driver Installation
Before EZ-KIT Lite evaluation system, verify that driver software installed properly: Remove power unplug cable, then apply power evaluation board. Verify that RESET (LED8) stays seconds then turns off. Connect cable evaluation board. After RESET (LED8) turns off, verify that yellow monitor (LED9) lit. This signifies that board communicating properly with host ready VisualDSP++. Verify that driver software installed properly. Open Windows Device Manager verify that ADSP-TS201S EZ-KIT Lite shows under Development Tools with exclamation point, Figure 1-12. using EZ-KIT Lite Windows disconnect cable from board before booting When Windows booted logged re-connect cable board. operation should continue normally from this point.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
1-15
Installation Tasks
Figure 1-12. Device Manager Window
Starting VisualDSP++
session VisualDSP++: Verify that yellow monitor (LED9, located near connector) lit. This signifies that board communicating properly with host ready VisualDSP++. Press hold down keyboard Control (CTRL) key. Select Start button Windows taskbar, then choose Programs->Analog Devices->VisualDSP++ 32-bit processors->VisualDSP++ Environment. running VisualDSP++ first time, step already have existing sessions, Session List dialog appears screen. Click Session.
1-16
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Getting Started
Session dialog box, shown Figure 1-13, appears screen.
Figure 1-13. Session Dialog Debug Target, choose TigerSHARC Emulators/EZ-KITs. Platform, choose ADSP-TS201EZ-KIT Lite port. Type target name Session Name accept default name. Click return Session List dialog box. 10.Highlight session click Activate.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
1-17
Installation Tasks
1-18
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
USING EZ-KIT LITE
This chapter provides specific information assist with developing programs ADSP-TS201S EZ-KIT Lite evaluation board. information appears following sections. "EZ-KIT Lite License Restrictions" page Describes restrictions VisualDSP++ license shipped with EZ-KIT Lite. "Memory Map" page Describes ADSP-TS201S EZ-KIT Lite board's memory map. "Using SDRAM Interface" page Defines register values needed configure external memory SDRAM access. "Using Flash Memory" page Describes program Flash memory. "Using Programmable FLAG Pins" page Describes function programmable FLAG pins EZ-KIT Lite evaluation system. "Using Interrupt Pins" page Describes function interrupt pins EZ-KIT Lite evaluation system. "Using Audio Interface" page Describes configure audio interface.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite License Restrictions
"Using Processor Link Ports" page Describes configure link ports. "Example Programs" page Provides information about example programs included ADSP-TS201S EZ-KIT Lite evaluation system. "Using Flash Programmer Utility" page Provides information Flash Programmer utility included with VisualDSP++. detailed information about programming ADSP-TS201S TigerSHARC processor, documents referred "Related Documents".
EZ-KIT Lite License Restrictions
license shipped with EZ-KIT Lite imposes following restrictions. size user program limited program's code 128K words. connections simulator emulator sessions allowed. EZ-KIT Lite hardware must connected powered order VisualDSP++ with license.
Memory
ADSP-TS201S processor Mbits internal memory that used program storage data storage. configuration internal memory detailed ADSP-TS201 TigerSHARC Processor Hardware Reference.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using EZ-KIT Lite
ADSP-TS201S EZ-KIT Lite board contains 512K 8-bit external Flash memory. memory divided into eight uniform sections. This memory connects processor's ~BMS ~MSO pins. Flash memory accessed boot memory space well external memory bank zero space. board also contains 64-bit external SDRAM memory. This memory connects processor's SDRAM interface. Table 2-1. EZ-KIT Lite Evaluation Board Memory
Start Address Internal Memory
0x0000 0000 0x0004 0000 0x0008 0000 0x000C 0000 0x0010 0000 0x0014 0000 0x001E 0000 0x001F 0000 0x0C00 0000 0x1000 0000 0x1400 0000
Address
0001 FFFF 0x0005 FFFF 0x0009 FFFF 0x000D FFFF 0x0011 FFFF 0x0015 FFFF 0x001E 03FF 0x001F 03FF 0x0FFF FFFF 0x13FF FFFF 0x17FF FFFF 0x37FF FFFF
Content Internal Memory Internal Memory Internal Memory Internal Memory Internal Memory Internal Memory Internal Registers Registers Broadcast Processor Processor External Memory Space Bank (MS0); includes Flash Memory which ends 0x3007 FFFF. External Memory Space Bank External Memory Space (MSSD0); MSSD0 includes SDRAM which ends
0x407F FFFF.
External Memory
0x3000 0000
0x3800 0000 0x4000 0000
0x39FF FFFF 0x43FF FFFF
0x8000 0000
0xFFFF FFFF
Host
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using SDRAM Interface
Using SDRAM Interface
SDRAM EZ-KIT Lite evaluation board access SDRAM, SYSCON SDRCON registers must configured properly. SDRAM default values are:
SYSCON SDRCON
0x00189067 0x00005983
SDRCON
supplied memory, follows:
register should configured
SDRAM enable, latency cycles pipe depth zero, page boundary words refresh rate every 3700 cycles, precharge cycles precharge five cycles init sequence cycle follows refresh SYSCON SDRCON registers define control configuration. They written once only after reset cannot changed during system operation. emulation space, SYSCON SDRCON registers written many times needed. debug monitor operates emulation space allows "always writable" mode these registers.
Using Flash Memory
AT49BV040 chip provides total 512K 8-bits external Flash memory, arranged into eight uniform memory blocks. block addresses shown Table 2-2.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using EZ-KIT Lite
Table 2-2. Flash Memory
Start Address
0x3000 0000 0x3001 0000 0x3002 0000 0x3003 0000 0x3004 0000 0x3005 0000 0x3006 0000 0x3007 0000
Address
0x3000 FFFF 0x3001 FFFF 0x3002 FFFF 0x3003 FFFF 0x3004 FFFF 0x3005 FFFF 0x3006 FFFF 0x3007 FFFF
Content Uniform Block Uniform Block Uniform Block Uniform Block Uniform Block Uniform Block Uniform Block Uniform Block
program Flash memory with your boot code, must first create loader file from your processor code. loader VisualDSP++ depending plan boot Flash. information creating loader file, refer VisualDSP++ online help VisualDSP++ Loader Manual TigerSHARC DSPs. Next, loader file must programmed into Flash memory. This done using VisualDSP++ Flash Programmer utility (see "Using Flash Programmer Utility" page 2-9).
Using Programmable FLAG Pins
Each ADSP-TS201S processor four programmable FLAG pins. FLAG pins from each processor (FLAG0 FLAG1) allow interaction with running program through switch (SW6-9). FLAG2 FLAG3 pins from each processor connected LEDs (LED3-6). After processor reset, programmable FLAGs configured inputs. direction each programmable FLAG configured FLAGREG register. FLAG configured output, value
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using Interrupt Pins
output FLAGREG register. FLAG configured input, value FLAG read from SQSTAT register. Programmable FLAGs summarized Table 2-3. more information configure programmable FLAG pins, ADSP-TS201S TigerSHARC Processor Hardware Reference. Table 2-3. Programmable FLAG Summary
FLAG
FLAG0_A FLAG1_A FLAG0_B FLAG1_B FLAG2_A FLAG3_A FLAG2_B FLAG3_B
Connected
LED4 LED6 LED5 LED3
FLAG0 FLAG1 pins connected push buttons supply feedback program execution. instance, write user input trigger routine when push button pressed.
FLAG2 FLAG3 pins connected LEDs supply feedback during program execution.
Using Interrupt Pins
ADSP-TS201S processor includes four interrupt pins (IRQ3-0) interaction with running program. external interrupt from each processor directly accessible through push button switches EZ-KIT Lite board. Interrupts summarized Table 2-4. more information configuring interrupt pins, ADSP-TS201S TigerSHARC Processor Hardware Reference.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using EZ-KIT Lite
Table 2-4. Interrupt Summary
Interrupt
IRQ0_A IRQ0_B
Connected
IRQ0 interrupt connected push buttons supply feedback program execution. instance, write your code perform different function when interrupt detected.
Using Audio Interface
audio interface EZ-KIT Lite board allows interface with board's analog-to-digital converter (ADC) digital-to-analog converter (DAC). audio interface consists main ICs: AD1871 AD1854. AD1871 stereo audio intended digital audio applications requiring high-performance analog-to-digital conversion. AD1871 provides THD+N dynamic range. AD1854 high-performance, single-chip stereo, audio delivering dynamic range sample rate. Because ADSP-TS201S processor does have SPORTs, Xilinx field-programmable gate array (FPGA) generates audio interface control signals between processor audio circuit. Setting FLAG3 signal "high" enables audio interface inside FPGA. Once audio interface been enabled, audio data transferred from processor generating DMAR0 cycle. audio data interfaces with processor lowest bits data (D23-0). Refer audio example program included EZ-KIT Lite's installation directory more information audio interface. Refer "Audio (P1-2)" page 3-20 information about audio connectors.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using Processor Link Ports
Using Processor Link Ports
link ports ADSP-TS201S processor LVDS signaling communicate with each another. Each processor (transmit) port (receive) port each link ports. RJ-45 connectors, Similarly, processor's link ports should respectively connected another processor's link port. this manner, processor connects other processor. link ports should connected using standard networking cable. length cable affect maximum frequency which data transferred. Refer ADSP-TS201S Embedded Processor Datasheet more information. There four link ports each processors EZ-KIT Lite. both processors connects field-programmable gate array (FPGA) U20. Link Port1 both processors connects expansion interface. Link Port2 each processors connects each other. Finally, Link Port3 connects RJ-45 connectors (J4-J7).
Link Port0
L0CLKIN_P both pulled internally FPGA. Similarly, L0CLKININ_N both pulled down internally FPGA. Finally, populated. this done avoid noise affecting EZ-KIT Lite operation. suppress noise from expansion interface, similar pull-up pull-down scheme been used Link Port1. board's R240 R239 used pull L1CLKIN_P both processors. Similarly, R242 R241 used pull down L1CLKIN_N both processors. Finally, populated avoid short between 2.5V power GND. link ports reactivated removing pull pull downs adding resistor R30.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using EZ-KIT Lite
Example Programs
Example programs provided with ADSP-TS201S EZ-KIT Lite demonstrate various capabilities evaluation board. These programs installed with EZ-KIT Lite software found \.\VisualDSP Please refer readme file provided with each example program more information.
Using Flash Programmer Utility
ADSP-TS201S EZ-KIT Lite evaluation system includes Flash Programmer utility. utility allows program Flash memory EZ-KIT Lite. Flash Programmer installed with VisualDSP++. Once utility installed, accessible from Tools pull-down menu. more information Flash Programmer utility, select Start choose Programs->Analog Devices->VisualDSP++ 32-bit Processors->VisualDSP++ Documentation.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Using Flash Programmer Utility
2-10
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT LITE HARDWARE REFERENCE
This chapter describes hardware design ADSP-TS201S EZ-KIT Lite board. following topics covered. "System Architecture" page Describes configuration ADSP-TS201S processor explains board components interface with EZ-KIT Lite. "Switch Settings" page Shows location describes function each configuration switch. "Configuration Resistors" page 3-10 Shows location describes function each configuration resistor. "LEDs Push Buttons" page 3-16 Shows location describes function LEDs push buttons. "Connectors" page 3-19 Shows location gives part number connectors board. addition, provides manufacturer part number information mating parts. "Specifications" page 3-22 Describes power connector.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
System Architecture
System Architecture
This section describes processor's configuration EZ-KIT Lite board.
Figure 3-1. System Architecture EZ-KIT Lite been designed demonstrate capabilities ADSP-TS201S TigerSHARC processor. processor powered three separate regulators core, internal DRAM,
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
processor core voltage 1.15V. internal DRAM powered external 1.5V regulator. Finally, external interface (IO) operates 2.5V accept 3.3V levels. oscillator conjunction with clock generator supply input clock processors. speed which core operates determined pull-up pull-down resistors both clock generator (U1) SCLKRAT[2:0] each processors. more information, "Clock Mode Settings" page 3-12. default, processor core runs (U1) (sclkrat) =500 MHz).
External Port
external port (EP) connects 512K 8-bit Flash memory. Flash memory connects boot memory select (~BMS) memory bank zero (~MS0), allowing memory used boot processor well store information during normal operation. Refer "Using Flash Memory" page information about Flash memory locations. also connects 64-bit SDRAM. Refer "Using SDRAM Interface" page information configure SDRAM registers.
Expansion Interface
expansion interface consists three connectors. following table shows interfaces each connector provides. exact pinout these connectors, refer Appendix "Schematics".
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
System Architecture
Table 3-1. Expansion Interface Connectors
Connector
Interfaces GND, Address, Data 2.5V, GND, SDRAM control signals, FLAGs, IRQs, TIMERs, Data GND, Reset, DMA, Memory Control, CLKOUT, Link Ports signals
When expansion interface, limits current interface speed must taken into consideration. maximum current limit depends capabilities regulator. Additional circuitry also extra loading signals, decreasing their maximum effective speed. Analog Devices does support responsible effects additional circuitry.
JTAG Emulation Port
JTAG emulation port allows emulator access processor's internal external memory, well special function registers through 14-pin header. "JTAG (P4)" page 3-21 more information about JTAG connector. learn more about available emulators, contact Analog Devices described "Embedded Processor Product Information" page -xv. more information about designing JTAG into custom board learn more about JTAG interface, please refer EE-68 found Analog Devices website.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Switch Settings
This section describes function switches SW1, SW2, SW10. location switches their respective default settings shown Figure 3-2.
Figure 3-2. Switch Locations
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Switch Settings
Audio Amplification Selection (SW1)
switch determines amplification right left signals connected Line-IN connector non-powered electret microphone used simply varying switch setting values shown Table 3-2. amplification gain factor achieved setting switch into electret microphone use. Table 3-2. Audio Amplification Selection (SW1)
Position
OFF1
Position
Position
Position
Audio Amplification Mode amplification electret microphone
Default settings
Processor Mode Selections (SW2)
switch configures several processor strap pins, which processor's operating modes after power hard reset: "Processor Boot Strap Settings" "SYSCON/SDRCON Mode Settings" "Interrupt Enable Settings" "Link Port Width Settings" switch settings should changed while power applied board. Many strap settings re-configured software after processor powered Refer ADSP-TS201S Embedded Processor Datasheet more information.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Processor Boot Strap Settings Position switch determines processor boots. Table shows available boot mode settings. Refer ADSP-TS201S Embedded Processor Datasheet more information. Table 3-3. Processor Boot Strap Settings (SW2 Position
Position
OFF1
Boot Mode EPROM Boot External Boot Link Port Boot
Default settings
SYSCON/SDRCON Mode Settings Position switch determines processor handles writes SYSCON SDRCON registers. Table shows setting type write. Refer ADSP-TS201S Embedded Processor Datasheet more information. Table 3-4. SYSCON/SRDCON Mode Settings (SW2 Position
Position
OFF1
SYSCON/SDRCON Mode SYSCON/SDRCON one-time writable SYSCON/SDRCON always writable
Default settings
emulation space, SYSCON SDRCON registers written many times needed. debug monitor operates emulation space allows "always writable" mode these registers.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Switch Settings
Interrupt Enable Settings Positions switch determine each processor handles interrupts. Table Table show settings interrupt modes. Refer ADSP-TS201S Embedded Processor Datasheet more information. Table 3-5. Interrupt Enable Settings (SW2 Position
Position
OFF1
Interrupt Enable Mode (U11) Disable interrupts, level-sensitive mode Enable interrupts, edge-sensitive mode
Default settings
Table 3-6. Interrupt Enable Settings (SW2 Position
Position
OFF1
Interrupt Enable Mode (U12) Disable interrupts, level-sensitive mode Enable interrupts, edge-sensitive mode
Default settings
Link Port Width Settings Positions switch determine link port data width. Table Table show settings types link ports data widths. Refer ADSP-TS201S Embedded Processor Datasheet more information. Table 3-7. Link Port Width Settings (SW2 Position
Position
OFF1
Link Port Data Width (U11) 1-Bit link port data width 4-Bit link port data width
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Default settings
Table 3-8. Link Port Width Settings (SW2 Position
Position
OFF1
Link Port Data Width (U12) 1-Bit link port data width 4-Bit link port data width
Default settings
FLAGs IRQs Switch Settings (SW10)
SW10 switch determines source FLAG signals connected each prospective DSPs. source modified that nets driven either push button switch external source Expansion Header. Refer "Programmable FLAG Push Buttons (SW6-9)" "Interrupt Push Buttons (SW4 SW5)" page 3-18 information FLAGs, IRQs, associated push buttons. Table shows setting interrupt modes. Table 3-9. FLAGs IRQs Switch Settings (SW10)
Position Position (FLAG0) (FLAG1)
With
Position Position Position Position (FLAG0) (FLAG1) (IRQ0) (IRQ0)
External source On-board push button switch
Default settings
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Configuration Resistors
Configuration Resistors
This section describes function TigerSHARC processors' configuration resistors. location configuration resistors their respective default settings shown Figure 3-3.
Figure 3-3. Resistor Locations (Bottom View Board)
Processor Settings
ADSP-TS201S processors EZ-KIT Lite factory-configured value zero value one. This means that cluster master. Although
3-10
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
recommended, value each processor varied placing resistors appropriate position. Table 3-10 Table 3-11 show available settings. EZ-KIT Lite must have processor with processor zero board. must present order allow initialization SDRAM external memory. Internal pull-up pull-downs certain pins, such memory interface arbitration, enabled only when ID=(000). Refer ADSP-TS201S TigerSHARC processor Hardware Reference more information. Table 3-10. Pins Configuration
R115 (Net: ID2_A) populated1 populated populated populated Populated Populated Populated Populated Default settings R117 (Net: ID1_A) populated populated Populated Populated populated populated Populated Populated R120 (Net: ID0_A) populated Populated populated Populated populated Populated populated Populated ID[2:0] Value
Table 3-11. Pins Configuration
R122 (Net: ID2_B) populated populated1 populated R123 (Net: ID1_B) populated populated Populated R124 (Net: ID0_B) populated Populated populated ID[2:0] Value
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
3-11
Configuration Resistors
Table 3-11. Pins Configuration (Cont'd)
R122 (Net: ID2_B) populated Populated Populated Populated Populated Default settings R123 (Net: ID1_B) Populated populated populated Populated Populated R124 (Net: ID0_B) Populated populated Populated populated Populated ID[2:0] Value
Clock Mode Settings
resistors clock generator (U1) resistors SCLKRAT pins[2:0] each processors determine frequency which processor operate. frequency supplied CLKIN processor also changed replacing oscillator (U18) shipped with board with different oscillator. Ensure that selected clock mode frequency exceed minimum maximum specifications ADSP-TS201S processor noted datasheet. final frequency which DSPs operate determined following equation:
(Freq U18)*(Mult Factor U1)*(Mult Factor SCLKRAT pins) Final Oper Freq
default frequency factory setting
MHz*5*5 MHz.
Table 3-12 through Table 3-14 show resistor settings clock generator SCLKRAT pins. more information clock modes, ADSP-TS201S Embedded Processor Datasheet. SCLK ratios must same value.
3-12
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Table 3-12. Clock Generator (U1) Settings
R215 populated populated populated Populated Populated1 Populated Populated Populated Populated R224 Populated Populated Populated Populated Populated Populated populated populated populated populated Populated Populated populated Populated Populated populated Populated Populated R223 Populated Populated populated Populated Populated populated Populated Populated populated Multiplication Factor
4.25 6.25
Reserved (Test mode)
Default settings
Table 3-13. SCLK Ratio Settings
R128 (SCLKRAT2) populated populated1 populated populated Populated Populated Populated Populated Default settings R127 (SCLKRAT1) populated populated Populated Populated populated populated Populated Populated R133 (SCLKRAT0) populated Populated populated Populated populated Populated populated Populated Multiplication Factor
Reserved
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
3-13
Configuration Resistors
Table 3-14. SCLK Ratio Settings
R126 (SCLKRAT2) populated populated1 populated populated Populated Populated Populated Populated Default settings R125 (SCLKRAT1) populated populated Populated Populated populated populated Populated Populated (SCLKRAT0) populated Populated populated Populated populated Populated populated Populated Multiplication Factor
Reserved
Control Impedance Selection
CONTROLIMP1 CONTROLIMP0 resistors impedance driver mode processors, described Table 3-15. resistors used together with drive strength pins determine actual impedance drive strength. Refer ADSP-TS201S Embedded Processor Datasheet more information. Table 3-15. Control Impedance Selection
R143 (CONTROLIMP1) Populated1 Populated populated populated Default settings R131 (CONTROLIMP0) populated Populated populated Populated Driver Mode Normal Pulse mode mode Pulse mode, mode
3-14
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Drive Strength Selection
DS[2:0] pins each processor determine digital drive strength, described Table 3-16 Table 3-17. Refer ADSP-TS201S Embedded Processor Datasheet more information. Table 3-16. Drive Strength Setting
R136 (DS2) Populated Populated Populated Populated populated populated1 R132 (DS1) populated populated Populated Populated populated populated Populated Populated R135 (DS0) Populated populated Populated populated Populated populated Populated populated Drive Strength 11.1% 23.8% 36.5% 49.2% 61.9% 74.6% 87.3% 100% Output Impedance
populated populated Default settings
Table 3-17. Drive Strength Setting
R138 (DS2) Populated Populated Populated Populated populated populated1 populated populated Default settings R139 (DS1) populated populated Populated Populated populated populated Populated Populated R137 (DS0) Populated populated Populated populated Populated populated Populated populated Drive Strength 11.1% 23.8% 36.5% 49.2% 61.9% 74.6% 87.3% 100% Output Impedance
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
3-15
LEDs Push Buttons
LEDs Push Buttons
This section describes function LEDs push buttons. Figure shows locations LEDs push buttons.
Figure 3-4. Push Button Locations
Power (LED1)
green LED, LED1, indicates that power being properly supplied board.
3-16
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Reset LEDs (LED2 LED8)
When LED2 lit, interface being reset. This interface only reset when configured. Once been configured, must remove power reset interface. When LED8 lit, indicates that master reset major active.
FLAG LEDs (LED3-6)
FLAG LEDs connect processor's FLAG pins (FLAG2 FLAG3). These LEDs active "high" output from processor. Refer "Using Programmable FLAG Pins" page information utilize FLAGs when programming processor. Table 3-18 shows FLAG signals corresponding LEDs. Table 3-18. FLAG LEDs
FLAG
FLAG2_A FLAG3_A FLAG2_B FLAG3_B
Reference Designator
LED4 LED6 LED5 LED3
Monitor (LED9)
monitor indicates that communication been initialized successfully, allowing connect processor using VisualDSP++. LED9 lit, resetting board and/or reinstalling driver (see "Installing EZ-KIT Lite Driver" page 1-7).
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
3-17
LEDs Push Buttons
Programmable FLAG Push Buttons (SW6-9)
Four push buttons provided general-purpose user input. SW6, SW7, SW8, push buttons connect processor's programmable FLAG pins. push buttons active "high" when pressed, send high processor. Refer "Using Programmable FLAG Pins" page more information FLAGs. Table 3-19 shows FLAG signals corresponding switches. Table 3-19. FLAG Push Buttons
FLAG
FLAG0_A FLAG1_A FLAG0_B FLAG1_B
Push Button Reference Designator
Interrupt Push Buttons (SW4-5)
push buttons, SW5, provided user interrupts. push buttons connect processor's interrupt pins. push buttons active "low" and, when pressed, send processor. Refer "Using Interrupt Pins" page more information interrupts. Table 3-20 shows interrupt signals corresponding switches. Table 3-20. Interrupt Push Buttons
Interrupt
IRQ0_A IRQ0_B
Push Button Reference Designator
3-18
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Reset Push Button (SW3)
RESET push button, SW3, resets board, except interface after been configured.
Connectors
This section describes connector functionality provides information about mating connectors. locations connectors shown Figure 3-5.
Figure 3-5. Connector Locations
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
3-19
Connectors
Audio (P1-2)
There stereo audio jacks.
Part Description stereo jack Manufacturer Shogyo Mating Connector stereo plug ste- Radio Shack cable L12-2397A Part Number SJ-0359AM-5
Power (P3)
power connector provides power necessary operate EZ-KIT Lite board.
Part Description Power Jack (P3) Manufacturer SWITCHCRAFT Digi-Key Part Number RAPC712 SC1152-ND
Mating Power Supply (shipped with EZ-KIT Lite) 7.5V Power Supply GlobTek TR9CC2000LCP-Y
3-20
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
JTAG (P4)
JTAG header connecting point JTAG in-circuit emulator pod. more information about designing JTAG into custom board learn more about JTAG interface, please refer EE-68 found Analog Devices website. missing provide keying. mating connector should have plug. When emulator connected JTAG header, debug interface disabled. When using emulator with EZ-KIT Lite board, follow connection instructions provided with emulator.
(P5)
connector standard Type receptacle.
Part Description Type receptacle Manufacturer Mill-Max Digi-Key Mating Connector cable (provided with kit) Assman Digi-Key AK672/2-3 AE1302-ND Part Number 897-30-004-90-000 ED90003-ND
Expansion Interface (J1-3)
Three board-to-board connectors provide signals most processor's peripheral interfaces. connectors located bottom board. more information about expansion interface, "Expansion Interface" page 3-3.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
3-21
Specifications
Part Description Position 0.05" Spacing
Manufacturer Samtec Mating Connector
Part Number SFC-145-T2-F-D-A
Position 0.05" Spacing (Through Hole) Position 0.05" Spacing (Surface Mount) Position 0.05" Spacing (Low Cost)
Samtec Samtec Samtec
TFM-145-x1 Series TFM-145-x2 Series TFC-145 Series
Link Ports (J4-7)
There four RJ-45 connectors EZ-KIT Lite. connectors used Link Port used Link Port
Part Description 8-Pin RJ-45 Connector Manufacturer TYCO Mating Cables Cable Foot) Gray Cable Meter) E-FILLIATE Digi-Key 119-5136 AE1233-ND Part Number 1-1609214-1
Specifications
This section provides requirements powering board.
Power Supply
power connector supplies power EZ-KIT Lite board. Table 3-21 shows power connector pinout.
3-22
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
Table 3-21. Power Connectors
Terminal Center Outer Ring Connection +7.5 VDC@2amps
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
3-23
Specifications
3-24
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
BILL MATERIALS
Manufacturer
Description
Reference
Reference Design
Quantity
3.3V-OCTAL-BUFFER
SN74LVT244BDW 74LVC14AD
HEX-INVER-SCHMITT-TR U14, IGGER 3.3V-OCTAL-BUFFER 200MA REGULATOR
ANALOG DEVICES DIGIKEY
IDT74FCT3244APY ADP3331ART
SINGLE-2-INPUT-NAND
U15, U31,
SN74AHC1G00DBVR SG-8002CA-PCC-ND
12.288MHz OSCILLA- ADJUSTABLE-3A-SWITCH-REG P-CHANNEL-MOSFET VR1-2
LINEAR TECH FAIRCHILD SEMI LINEAR TECH VISHAY MICRON
LT1765ES8
FDS6375
ADJ-7A-SWITCH-REG-CN TRLR N-CHANNEL-MOSFET 4MX32-SDRAM-166MHZ U24-25
LTC1773EMS
SI9804DY MT48LC4M32B2TG-7
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Manufacturer
Description
Reference
Reference Design
Quantity
3.3V GENERATOR 3.3V DRIVER
ATMEL
IDT5V928PGI IDT49FCT3805AQ AT49BV040-90JC 12065A102JAT2A 12065A222JAT050
512K-X-8-BIT-FLASH-3.3V 1000pF 2200pF C47-48 C22, C24, C56-57
0.1uF VOLTAGE-SUPERVISOR
ANALOG DEVICES ANALOG DEVICES NATIONAL ANALOG DEVICES ANALOG DEVICES ANALOG DEVICES ANALOG DEVICES
12065E104MAT2A ADM708SAR
3.3V 1.5A REGULATOR
ADP3339AKC-3.3-RL
DUAL AUDIO STERO-DAC
U6-8,
LMV722M AD1854JRS
STERO-DAC
AD1871YRS
500MA REGULATOR
ADP3336ARM-REEL
TigerSHARC ADSP-TS201S U11-12 Processor RUBBER FEET BLACK
ADSP-TS201SABP-ENG
MH1-2, MH4-5 MOUSER
517-SJ-5018BK
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Bill Materials
Manufacturer
Description
Reference
Reference Design
Quantity
2.5MM_JACK
SWITCHCRAFT PANASONIC SAMTEC DIGIKEY TYCO DIGIKEY
SC1152-ND12
SPST-MOMENTARY SW3-9 0.05 45X2 DIP6 RJ45 8PIN RIGHT ANGLE SWITCH 0.00 1/8W J1-3 SW2, SW10 J4-7
EVQ-PAD04M SFC-145-T2-F-D-A CKN1364-ND 1-1609214-1 CKN1363-ND 0.0ECT-ND
R76, R91, R104, YAGEO R107, R109-110, R113, R118, R178-179, R189, R202 LED3-6, C25, C1-2, C7-8 PANASONIC
AMBER-SMT 330pF 0.01uF 100V CERM 0.1uF CERM
LN1461C-TR 08055A331JAT 08051C103KAT2A 08055C104KAT
C51, C63, C66, C142-143, C145-149, C247-249 C10-11, C13-14 CT22-23 SPRAGUE
0.001uF 10uF TANT
08055A102JAT2A 293D106X9016C2T
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Manufacturer
Description
Reference
Reference Design
Quantity
100MW
R26, R39-42, R77, R86-87, R89, R92, R94, R100, R102, R108, R112, R116, R153, R158-160, R182-183, R187, R194, R195, R203, R213-215, R223-224, R235-236, R238-242 R93, R186, R188 R217 R227
CR21-103J-T
4.7K 100MW
CR21-4701F-T
10.7K 1/8W 10.5K 1/8W 2.00K 1/8W
DALE BECKMAN
CRCW1206-1072FRT1 BCR1/81052FT CR32-2001F-T
R37-38,R88, DALE R121, R156-157 R60,
49.9K 1/8W 100pF 100V
CR32-4992F-T 12061A101JAT2A
C12, C15, C20-21, C23, C27, C31, C52-53 CT1-3
10uF TANT SCHOT_RECT 100MW
TAJB106K016R
MICRO-SEMI HSM350J CR21-101J-T
R78, R85, R95, R99, R101, R103
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Bill Materials
Manufacturer
Description
Reference
Reference Design
Quantity
220pf SILICON RECTIFIER
C28, C32,
GENERAL SEMI
12061A221JAT2A
100MHZ 500MA FERRITE BEAD 1/8W
FER1-3, FER6-7 DIGIKEY
240-1019-1-ND
R46, R48, R50, R47,
CR32-2370F-T
750K 1/8W
DALEVISHAY PHYCOMP
CRCW12067503FRT1
5.76K 1/8W
R44,R53-57, R150, R152 R61-62 C16-19 C54, C70-72 R192 R201 C26, R68,
9C12063A5761FKHFT
11.0K 1/8W 120PF 47PF 100V 340K 1/8W 698K 1/8W 680PF 2.74K 1/8W 5.49K 1/8W 3.32K 1/8W
DALE PHILLIPS MURATA KEMET DALE DALE DALE
CRCW12061102FRT1 1206CG121J9B200 GRM40X7R105K016AL C1206C470K1GACTU CRCW0805-3403FT CRCW0805-6983FT 08055A681FAT2A CRCW12062741FRT1 ERJ-8ENF5491V CRCW12063321FRT1
R64-65, R69-70 PANASONIC R66, DALE
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Manufacturer
Description
Reference
Reference Design
Quantity
1.65K 1/8W 10UF ELEC 68UF ELEC SL22 SCHOTTKY
R67, CT4-5 CT6-7
PANASONIC DIG01 PANASONIC GENERAL SEMI PHILIPS
ERJ-8ENF1651V PCE3062TR-ND EEV-FC1E680P SL22
332K 1/10W 0.00 100MW
R234
9C08052A3323FKRT/R CRCW0805
R1-2, R7-10, VISHAY R130, R155, R161, R181, R184-185, R208-212, R226 FER5 MURATA
100MHZ FERRITE BEAD 35.7K 1/10W 10UH 1/10W
DLW5BSN191SQ2
R220 L1-2 R11, R24, R32, R34-35,R129, R205-207 C73-74 C37, C41, C44, C38-40, C42-43,
YAGEO PANASONIC
9C08052A3572FKHFT ELJ-FC100KF
VISHAY/DALE CRCW0805220JRT1
0.47UF
0805YC474KAT2A 0805ZC105KAT2A
1000PF
YAGEO
1206CG229C9B200
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Bill Materials
Manufacturer
Description
Reference
Reference Design
Quantity
4.7UF 6.3V 0.1UF
C61, C65,
08056D475KAT2A 0402ZD104KAT2A
C69, C75, C79-84, C155-162, C108,C110-115, C118, C120-122, C141, C144, C165-166, C182,C184-185, C187,C197-201, C221-225, C228-231, C237-239, C241 C68,C85-90, C92-99, C103-104, C107, C109, C129-140, C167, C181, C183,C202-205, C216,C218-220, C227, C232, C240, C242 RN3-4
0.01UF
0402YC103KAT2A
4.7K 31MW 1/10W
746X101472J CRCW08054990FRT1
R23, R25,R45, VISHAY R51,R111, R114, R124, R133, R140-146,R154 L4-5 DIGIKEY TYCO
5.9MOHMS 1.5UH 45MOHM
919AS-1RON=P3-ND DS6630-1R5M
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Manufacturer
Description
Reference
Reference Design
Quantity
0.01 1.5W 2.55K 1/10W 1/10W 80.6K 1/10W SUPERMINI SCHOTTKY
R219 R105 R218 R221 D6-7
VISHAY VISHAY VISHAY CENTRAL SEMI SEMI
LR2512-01-R010-F CRCW08052251FRT1 CRCW0805303JRT1 CRCW08058062FRT1 CMDSH-3
MBRS340T3 680uF 6.3V TANT-LOW-ESR 0.18uF CERM 100uF TANT-LOW-ESR 150uF TANT-LOW-ESR 2.2uF CERM 1000PF CERM
CT15
MBRS340T3 TPSE687K006R0045
C55, CT16-17
08053C184KAT2A TPSC107K010R0075
CT14
KEMET
T494D157K010AS
C59-60
0805ZD225KAT2A 04025C102JAT2A
C67, C168-180, C186,C188-196, C206-215, C217, C226, C233-236, C243-246 R191 R147-148 VISHAY VISHAY
64.9K 1/10W 57.6K 1/4W
CRCW08056492FRT1 CRCW12065762FRT1
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Bill Materials
Manufacturer
Description
Reference
Reference Design
Quantity
210K 1/4W
R190 R13, R15-22, R27, R29, R31, R33, R36, R43, R83, R96,R98, R230-233 R58-59, R228 R79-82, R84, R90, R151 R216, R222 R225 LED2,LED8
VISHAY VISHAY
CRCW08052103FRT1 CRCW08051000FRT1
1/10W
100K 1/8W 1/8W
CR1206-1003FRT1 CR32-271J-T
20MHZ 10.0K 1/8W 13.0K 1/8W RED-SMT GULL-WING
ECLIPTEK DALE PANASONIC PANASONIC PANASONIC DALE PANASONIC ANALOG DEVICES BERG RAYCHEM ELEC.
EC1100HS-20.000M CRCW1206-1002FRT1 ERJ-8ENF1302V LN1261C LN1361C CRCW12066040FRT1 ECS-T1EY105R ADG774ABRQ
GREEN-SMT GULL-WING LED1 1/8W TANT QUICKSWITCH-257 R74-75 CT8-13 U22-23
2.5A RESETABLE 3.5MM STEREO_JACK
P1-2
54102-T08-07 SMD250-2 ST-323-5
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
Manufacturer
Description
Reference
Reference Design
Quantity
10uF 6.3V TANT
C91, C100, C154, C163, C164
08056D106KAT2A
A-10
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Part Number
ADSP-TS201S EZ-KIT Lite
ANALOG DEVICES
Approvals
Drawn Checked Engineering
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE TITLE
Board
3-1-2004_10:59
Size
Date
A0178-2002
Sheet
1.1C
A[0:31] MSSD2 MSSD3 ADSP-TS201S BP576 MSSD[0:3] MSSD0 MSSD1 MSSD0 MSSD1 MSSD2 MSSD3 SDA10 SDCKE SDWE SDA10 SDCKE SDWE LDQM HDQM LDQM HDQM BM_A BOFF BUSLOCK BOFF BUSLOCK BR[0:7] BRST BRST D[0:63] DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8 DATA9 DATA10 DATA11 DATA12 DATA13 DATA14 DATA15 DATA16 DATA17 DATA18 DATA19 DATA20 DATA21 DATA22 DATA23 DATA24 DATA25 DATA26 DATA27 DATA28 DATA29 DATA30 DATA31 DATA32 DATA33 AA15 DATA34 DATA35 DATA36 DATA37 DATA38 DATA39 DATA40 DATA41 TCK_DSP_A TRST DATA42 DATA43 DATA44 DATA45 DATA46 DATA47 DATA48 SCLK_DSP_A DATA49 0.00 0.00 10PF 10PF DATA50 DATA51 DATA52 SCLK1 SCLK2 DATA53 DATA54 DATA55 DATA56 DATA57 DATA58 DSP_RESET RST_IN DATA59 DATA60 0.00 RST_OUT DATA61 DATA62 POR_IN DATA63 ADDR0 ADDR1 ADDR2 ADDR3 ADDR4 ADDR5 ADDR6 ADDR7 ADDR8 ADDR9 ADDR10 ADDR11 ADDR12 ADDR13 ADDR14 ADDR15 ADDR16 ADDR17 ADDR18 ADDR19 ADDR20 ADDR21 ADDR22 ADDR23 ADDR24 ADDR25 ADDR26 ADDR27 ADDR28 ADDR29 ADDR30 ADDR31
LABEL "DSP near this
KEEP THESE NETS SAME LENGTH
PLACE CLOSE IDT5v929 PINS
SCLK_DSP_A 3.3V VDDQ1 VDDQ2 VDDQ3 VDDQ4 GND1 SCLKRAT0 SCLKRAT1 SCLKRAT2 SCLKRAT0_A SCLKRAT1_A SCLKRAT2_A 20MHZ OSC001 GND2 GND3 GND4 GND5 CLKOUT_EXP SDRAM_CLK1 SCLK_DSP_B 3.3V R224 R223 X1_I X2_O SDRAM_CLK0
DMAR0 DMAR1 DMAR2 DMAR3
DMAR0 DMAR1_A DMAR2_A DMAR3_A R215
IOWR IORD
IOWR IORD IOEN
IOEN
ID0_A ID1_A ID2_A
IDT5V928PGI TSSOP24
CONTROLIMP0 CONTROLIMP1
CONTROLIMP0 CONTROLIMP1
PLACE TEST POINTS NEXT EACH OTHER
DS0_A DS1_A DS2_A
PLACE CLOSE EACH OTHER
ENEDREG
ENEDREG_A
TMR0E
TMR0E_A
TDO_A
FLAG0 FLAG1 FLAG2 FLAG3 FLAG0_A FLAG1_A 3.3V FLAG2_A FLAG3_A 3.3V FLAG[3:0]_A
PLACE CLOSE PINS
TRST
IRQ0 IRQ1 IRQ2 IRQ3
IRQ0_A IRQ1_A IRQ2_A IRQ3_A
IRQ[3:0]_A
C108 0.1UF
C107 0.01UF
C103 0.01UF
C104 0.01UF
C141 0.1UF
IDT5V928PGI
20MHz
ADSP-TS201S BP576
ANALOG DEVICES
Approvals
Drawn Checked Engineering Size Board
3-1-2004_10:59
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE A0178-2002
Sheet
Date
1.1C
A[0:31] MSSD2 MSSD3 ADSP-TS201S BP576 MSSD[0:3] MSSD0 MSSD1 MSSD0 IRQ0 IRQ1 IRQ2 IRQ3 IRQ0_B IRQ1_B IRQ2_B IRQ3_B IRQ[3:0]_B SDA10 SDCKE SDWE SDA10 SDCKE SDWE LDQM HDQM LDQM HDQM TMR0E TMR0E_B DS0_B DS1_B DS2_B BM_B BOFF BUSLOCK BOFF BUSLOCK BR[0:7] BRST BRST DMAR0 DMAR1 DMAR2 DMAR3 DMAR0 DMAR1_B DMAR2_B DMAR3_B SDCKE IOWR IORD IOEN DMAR2_A IOWR DMAR3_A IORD BOFF IOEN DMAR1_B 4.7K RNET8 ID0_B ID1_B ID2_B DMAR0 DMAR1_A SCLKRAT0 SCLKRAT1 SCLKRAT2 SCLKRAT0_B SCLKRAT1_B SCLKRAT2_B DMAR3_B DMAR2_B CONTROLIMP0 CONTROLIMP1 CONTROLIMP0 CONTROLIMP1 4.7K RNET8 COM1 COM2 COM1 COM2 2.5V 4.7K 4.7K 2.5V 2.5V D[0:63] DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8 DATA9 DATA10 DATA11 DATA12 DATA13 DATA14 DATA15 DATA16 DATA17 DATA18 DATA19 DATA20 DATA21 DATA22 DATA23 DATA24 DATA25 DATA26 DATA27 DATA28 DATA29 DATA30 DATA31 DATA32 DATA33 AA15 DATA34 DATA35 DATA36 DATA37 DATA38 DATA39 DATA40 DATA41 TRST DATA42 DATA43 DATA44 DATA45 DATA46 DATA47 DATA48 SCLK_DSP_B DATA49 0.00 0.00 10PF 10PF DATA50 DATA51 DATA52 SCLK1 SCLK2 DATA53 DATA54 DATA55 DATA56 DATA57 DATA58 DSP_RESET RST_IN DATA59 DATA60 0.00 RST_OUT DATA61 DATA62 POR_IN DATA63
LABEL "DSP near this
ADDR0 ADDR1 ADDR2 ADDR3 ADDR4 ADDR5 ADDR6 ADDR7 ADDR8 ADDR9 ADDR10 ADDR11 ADDR12 ADDR13 ADDR14 ADDR15 ADDR16 ADDR17 ADDR18 ADDR19 ADDR20 ADDR21 ADDR22 ADDR23 ADDR24 ADDR25 ADDR26 ADDR27 ADDR28 ADDR29 ADDR30 ADDR31
ENEDREG
ENEDREG_B
TCK_DSP_B TDI_B TDO_B
FLAG0 FLAG1 FLAG2 FLAG3 FLAG0_B FLAG1_B FLAG2_B FLAG3_B FLAG[3:0]_B
PLACE CLOSE PINS
TRST
MSSD1 MSSD2 MSSD3
ADSP-TS201S BP576
ANALOG DEVICES
Approvals
Drawn Checked Engineering Size Board
3-1-2004_10:59
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE A0178-2002
Sheet
Date
1.1C
NETS THIS PAGE EXCEPT L?ACK?_? L?BCMP?_? DIFFERETIAL PAIRS THESE SIGNAL SHOULD ROUTING ACCORDING GUIDELINES EE-179
Link Port Link Port Link Port Link Port
FPGA RJ45
FPGA RJ45
2_5V_DSP_A
2_5V_DSP_B
L0DATO0_P L0DATO0_N L0DATO1_P L0DATO1_N L0DATO2_P L0DATO2_N L0DATO3_P L0DATO3_N L0CLKO_P L0CLKO_N L0ACKI L0BCMPO
L0DATO0_P_A L0DATO0_N_A L0DATI0_P_B L0CLKIN_P_B L0CLKOUT_P_A L0CLKOUT_N_A L0ACKI_A L0BCMPO_A L0CLKIN_N_B L0CLKIN_P_B L0CLKIN_N_B L0ACKO_B L0BCMPI_B L0DATI0_N_B
PLACE CLOSE PINS (CRITICAL)
L0DATI0_P_A L0CLKIN_P_A L0CLKIN_N_A L0DATI0_N_A
L0DATI0_P_A L0DATI0_N_A
L0DATI0_P L0DATI0_N L0DATI1_P L0DATI1_N L0DATI2_P L0DATI2_N L0DATI3_P L0DATI3_N L0CLKIN_P L0CLKIN_N L0ACKO L0BCMPI
PLACE CLOSE PINS (CRITICAL)
L0DATI0_P_B L0DATI0_N_B
L0DATI0_P
L0CLKIN_P_A L0CLKIN_N_A L0ACKO_A L0BCMPI_A
L0DATI0_N L0DATI1_P L0DATI1_N L0DATI2_P L0DATI2_N L0DATI3_P L0DATI3_N L0CLKIN_P L0CLKIN_N L0ACKO L0BCMPI
L0DATO0_P L0DATO0_N L0DATO1_P L0DATO1_N L0DATO2_P L0DATO2_N L0DATO3_P L0DATO3_N L0CLKO_P L0CLKO_N L0ACKI L0BCMPO
L0DATO0_P_B L0DATO0_N_B
L0CLKOUT_P_B L0CLKOUT_N_B L0ACKI_B L0BCMPO_B
L1DATI0_P_A 2_5V_DSP_A L1DATI0_N_A L1DATI0_N_A
L1DATI0_P L1DATI0_N L1DATI1_P L1DATI1_N L1DATI2_P L1DATI2_N L1DATI3_P L1DATI3_N L1CLKIN_P L1CLKIN_N L1ACKO L1BCMPI
L1DATI0_P_A
R240 L1CLKIN_P_A L1CLKIN_N_A
L1CLKIN_P_A L1CLKIN_N_A L1ACKO_A L1BCMPI_A
AA24 L1DATO0_P AA23 L1DATO0_N L1DATO1_P L1DATO1_N L1DATO2_P L1DATO2_N L1DATO3_P L1DATO3_N L1CLKO_P L1CLKO_N AC24 L1ACKI AA22 L1BCMPO
L1DATO0_P_A L1DATO0_N_A
2_5V_DSP_B L1DATI0_P_B R239 L1DATI0_N_B
L1DATI0_P_B L1DATI0_N_B
L1CLKOUT_P_A L1CLKOUT_N_A L1ACKI_A L1BCMPO_A L1CLKIN_P_B
L1CLKIN_N_B
L1CLKIN_P_B L1CLKIN_N_B L1ACKO_B L1BCMPI_B
L1DATI0_P L1DATI0_N L1DATI1_P L1DATI1_N L1DATI2_P L1DATI2_N L1DATI3_P L1DATI3_N L1CLKIN_P L1CLKIN_N L1ACKO L1BCMPI
AA24 L1DATO0_P AA23 L1DATO0_N L1DATO1_P L1DATO1_N L1DATO2_P L1DATO2_N L1DATO3_P L1DATO3_N L1CLKO_P L1CLKO_N AC24 L1ACKI AA22 L1BCMPO
L1DATO0_P_B L1DATO0_N_B
L1CLKOUT_P_B L1CLKOUT_N_B L1ACKI_B L1BCMPO_B
L2DATI0_P_A L2DATI0_N_A R242 L2DATI0_N_A L2DATI1_P_A L2DATI1_N_A L2DATI1_N_A L2DATI2_P_A L2DATI2_N_A L2DATI3_P_A L2DATI2_N_A L2DATI3_N_A L2CLKIN_P_A L2CLKIN_N_A L2DATI3_N_A L2ACKO_A L2BCMPI_A
AD21 AC21 AB20 AA20 AD20 AC20 AD19 AC19 AB19 AA19 AB21 AD23
L2DATI0_P L2DATI0_N L2DATI1_P L2DATI1_N L2DATI2_P L2DATI2_N L2DATI3_P L2DATI3_N L2CLKIN_P L2CLKIN_N L2ACKO L2BCMPI
L2DATI0_P_A L2DATI1_P_A L2DATI2_P_A L2DATI3_P_A
L2CLKIN_P_A L2CLKIN_N_A
AB16 L2DATO0_P AA16 L2DATO0_N AD17 L2DATO1_P AC17 L2DATO1_N AD18 L2DATO2_P AC18 L2DATO2_N AB18 L2DATO3_P AA18 L2DATO3_N AB17 L2CLKO_P AA17 L2CLKO_N AD16 L2ACKI AC16 L2BCMPO
L2DATO0_P_A L2DATO0_N_A L2DATO1_P_A L2DATO1_N_A L2DATO2_P_A L2DATO2_N_A L2DATO3_P_A L2DATO3_N_A L2CLKOUT_P_A L2CLKOUT_N_A L2ACKI_A L2BCMPO_A L2DATO3_P_A L2DATO2_P_A L2DATO1_P_A L2DATO0_P_A
L2DATO0_N_A L2DATO1_N_A L2DATO2_N_A L2DATO3_N_A L2CLKOUT_P_A L2CLKOUT_N_A
L2DATO0_P_A R241 L2DATO0_N_A L2DATO1_P_A L2DATO1_N_A L2DATO2_P_A L2DATO2_N_A L2DATO3_P_A L2DATO3_N_A L2CLKOUT_P_A L2CLKOUT_N_A L2ACKI_A L2BCMPO_A
AD21 L2DATI0_P AC21 L2DATI0_N AB20 L2DATI1_P AA20 L2DATI1_N AD20 L2DATI2_P AC20 L2DATI2_N AD19 L2DATI3_P AC19 L2DATI3_N AB19 L2CLKIN_P AA19 L2CLKIN_N AB21 L2ACKO AD23 L2BCMPI
AB16 L2DATO0_P AA16 L2DATO0_N AD17 L2DATO1_P AC17 L2DATO1_N AD18 L2DATO2_P AC18 L2DATO2_N AB18 L2DATO3_P AA18 L2DATO3_N AB17 L2CLKO_P AA17 L2CLKO_N AD16 L2ACKI AC16 L2BCMPO
L2DATI0_P_A L2DATI0_N_A L2DATI1_P_A L2DATI1_N_A L2DATI2_P_A L2DATI2_N_A L2DATI3_P_A L2DATI3_N_A L2CLKIN_P_A L2CLKIN_N_A L2ACKO_A L2BCMPI_A
L3DATI0_P_A L3DATI0_N_A
AD14 AC14 AB14 AA14 AB13 AA13
L3DATI0_P L3DATI0_N L3DATI1_P L3DATI1_N L3DATI2_P L3DATI2_N L3DATI3_P L3DATI3_N L3CLKIN_P L3CLKIN_N L3ACKO L3BCMPI
L3DATI0_P_A L3DATI0_N_A L3CLKIN_P_A L3CLKIN_P_A L3CLKIN_N_A L3CLKIN_N_A L3ACKO_A L3BCMPI_A
AD12 AC12 AD13 AC13 AC15 AD15
L3DATO0_P L3DATO0_N AB10 L3DATO1_P AA10 L3DATO1_N AD11 L3DATO2_P AC11 L3DATO2_N AB11 L3DATO3_P AA11 L3DATO3_N AD10 L3CLKO_P AC10 L3CLKO_N L3ACKI L3BCMPO
L3DATO0_P_A L3DATO0_N_A
L3DATI0_P_B L3DATI0_N_B
L3DATI0_P_B L3DATI0_N_B
L3CLKOUT_P_A L3CLKIN_P_B L3CLKOUT_N_A L3ACKI_A L3BCMPO_A
L3CLKIN_N_B
L3CLKIN_P_B L3CLKIN_N_B L3ACKO_B L3BCMPI_B
AD14 L3DATI0_P AC14 L3DATI0_N AB14 L3DATI1_P AA14 L3DATI1_N AB13 L3DATI2_P AA13 L3DATI2_N AD12 L3DATI3_P AC12 L3DATI3_N AD13 L3CLKIN_P AC13 L3CLKIN_N AC15 L3ACKO AD15 L3BCMPI
L3DATO0_P L3DATO0_N AB10 L3DATO1_P AA10 L3DATO1_N AD11 L3DATO2_P AC11 L3DATO2_N AB11 L3DATO3_P AA11 L3DATO3_N AD10 L3CLKO_P AC10 L3CLKO_N L3ACKI L3BCMPO
L3DATO0_P_B L3DATO0_N_B
L3CLKOUT_P_B L3CLKOUT_N_B L3ACKI_B L3BCMPO_B
2_5V_DSP_A
ADSP-TS201S BP576
2_5V_DSP_B
ADSP-TS201S BP576
R108
R116
R119
R153
R235
R236
R237
R238
ANALOG DEVICES
Approvals
Drawn Checked Engineering Size Board
3-1-2004_10:59
Cotton Road Nashua, 03063 1-800-ANALOGD
L0BCMPI_B L0BCMPI_A L1BCMPI_B L1BCMPI_A L2BCMPO_A L2BCMPI_A L3BCMPI_B L3BCMPI_A
Date
Title
ADSP-TS201S EZ-KIT LITE LINK PORTS A0178-2002
Sheet
Date
1.1C
3.3V
2.5V 1V_DSP_A 1V_DSP_B
R121 2.00K 1206
2.00K 1206
10UH 1008
10UH 1008
DSP_SCLK_VREF
DSP_VREF A1V_DSP_A A1V_DSP_B
2.00K 1206
2.00K 1206
PLACE CLOSE TOGETHER least vias connection PLACE CLOSE TOGETHER least vias connection
1.0V 1V_DSP_A 1_5V_DSP_A 1.5V
1_5V_DSP_B 1.5V VDD_DRAM1F12 VDD_DRAM2F15 VDD_DRAM3F16 VDD_DRAM4G11 VDD_DRAM5G12 VDD_DRAM6G15 VDD_DRAM7G16 VDD_DRAM8K18 VDD_DRAM9K19 VDD_DRAM10L18 VDD_DRAM11L19 VDD_DRAM12P18 VDD_DRAM13P19 VDD_DRAM14R18 VDD_DRAM15R19 VDD_DRAM16U11 VDD_DRAM17V11 VDD_DRAM18V12 VDD_DRAM19V15 VDD_DRAM20V16 VDD_DRAM21W11 VDD_DRAM22W12 VDD_DRAM23W15 VDD_DRAM24W16 VDD_DRAM25 AB23 VDD_IO1AB24 VDD_IO2AC22 VDD_IO3AC3 VDD_IO4AD22 VDD_IO5AD3 VDD_IO6C23 VDD_IO7C24 VDD_IO8E10 VDD_IO9E11 VDD_IO10E12 VDD_IO11E13 VDD_IO12E14 VDD_IO13E15 VDD_IO14E17 VDD_IO15E19 VDD_IO16E6 VDD_IO17E8 VDD_IO18F20 VDD_IO19F5 VDD_IO20G20 VDD_IO21H20 VDD_IO22H5 VDD_IO23K20 VDD_IO24K5 VDD_IO25L20 VDD_IO26L5 VDD_IO27M20 VDD_IO28M5 VDD_IO29N20 VDD_IO30N5 VDD_IO31P20 VDD_IO32P5 VDD_IO33R20 VDD_IO34R5 VDD_IO35U20 VDD_IO36U5 VDD_IO37V20 VDD_IO38W20 VDD_IO39W5 VDD_IO40Y10 VDD_IO41Y11 VDD_IO42Y12 VDD_IO43Y13 VDD_IO44Y14 VDD_IO45Y15 VDD_IO46Y17 VDD_IO47Y19 VDD_IO48Y6 VDD_IO49Y8 VDD_IO50 VREF
VDD_DRAM1F12 VDD_DRAM2F15 VDD_DRAM3F16 VDD_DRAM4G11 VDD_DRAM5G12 VDD_DRAM6G15 VDD_DRAM7G16 VDD_DRAM8K18 VDD_DRAM9K19 VDD_DRAM10L18 VDD_DRAM11L19 VDD_DRAM12P18 VDD_DRAM13P19 VDD_DRAM14R18 VDD_DRAM15R19 VDD_DRAM16U11 VDD_DRAM17V11 VDD_DRAM18V12 VDD_DRAM19V15 VDD_DRAM20V16 VDD_DRAM21W11 VDD_DRAM22W12 VDD_DRAM23W15 VDD_DRAM24W16 VDD_DRAM25 AB23 VDD_IO1AB24 VDD_IO2AC22 VDD_IO3AC3 VDD_IO4AD22 VDD_IO5AD3 VDD_IO6C23 VDD_IO7C24 VDD_IO8E10 VDD_IO9E11 VDD_IO10E12 VDD_IO11E13 VDD_IO12E14 VDD_IO13E15 VDD_IO14E17 VDD_IO15E19 VDD_IO16E6 VDD_IO17E8 VDD_IO18F20 VDD_IO19F5 VDD_IO20G20 VDD_IO21H20 VDD_IO22H5 VDD_IO23K20 VDD_IO24K5 VDD_IO25L20 VDD_IO26L5 VDD_IO27M20 VDD_IO28M5 VDD_IO29N20 VDD_IO30N5 VDD_IO31P20 VDD_IO32P5 VDD_IO33R20 VDD_IO34R5 VDD_IO35U20 VDD_IO36U5 VDD_IO37V20 VDD_IO38W20 VDD_IO39W5 VDD_IO40Y10 VDD_IO41Y11 VDD_IO42Y12 VDD_IO43Y13 VDD_IO44Y14 VDD_IO45Y15 VDD_IO46Y17 VDD_IO47Y19 VDD_IO48Y6 VDD_IO49Y8 VDD_IO50 VREF A22VSS1 A24VSS2 A3VSS3 AA12VSS4 AA21VSS5 AA4VSS6 AB1VSS7 AB12VSS8 AB15VSS9 AB2VSS10 AB22VSS11 AB3VSS12 AC2VSS13 AC23VSS14 AD1VSS15 AD24VSS16 B2VSS17 B22VSS18 B23VSS19 B3VSS20 C1VSS21 C13VSS22 C2VSS23 C22VSS24 C3VSS25 D13VSS26 D21VSS27 D4VSS28 E16VSS29 E18VSS30 E20VSS31 E5VSS32 E7VSS33 E9VSS34 G2VSS35 G5VSS36 H1VSS37 H10VSS38 H11VSS39 H12VSS40 H13VSS41 H14VSS42 H15VSS43 H16VSS44 H17VSS45 H8VSS46 H9VSS47 J10VSS48 J11VSS49 J12VSS50 J13VSS51 J14VSS52 J15VSS53 J16VSS54 J17VSS55 J20VSS56 J3VSS57 J5VSS58 J8VSS59 J9VSS60 K10VSS61 K11VSS62 K12VSS63 K13VSS64 K14VSS65 K15VSS66 K16VSS67 K17VSS68 K8VSS69 K9VSS70 L10VSS71 L11VSS72 L12VSS73 L13VSS74 L14VSS75 L15VSS76 VSS77 ADSP-TS201S BP576 VSS78L17 VSS79L8 VSS80L9 VSS81M10 VSS82M11 VSS83M12 VSS84M13 VSS85M14 VSS86M15 VSS87M16 VSS88M17 VSS89M21 VSS90M22 VSS91M8 VSS92M9 VSS93N10 VSS94N11 VSS95N12 VSS96N13 VSS97N14 VSS98N15 VSS99N16 VSS100N17 VSS101N2 VSS102N8 VSS103N9 VSS104P10 VSS105P11 VSS106P12 VSS107P13 VSS108P14 VSS109P15 VSS110P16 VSS111P17 VSS112P3 VSS113P8 VSS114P9 VSS115R1 VSS116R10 VSS117R11 VSS118R12 VSS119R13 VSS120R14 VSS121R15 VSS122R16 VSS123R17 VSS124R22 VSS125R8 VSS126R9 VSS127T10 VSS128T11 VSS129T12 VSS130T13 VSS131T14 VSS132T15 VSS133T16 VSS134T17 VSS135T20 VSS136T5 VSS137T8 VSS138T9 VSS139U12 VSS140U13 VSS141U14 VSS142U15 VSS143U16 VSS144U17 VSS145U8 VSS146U9 VSS147V5 VSS148Y16 VSS149Y18 VSS150Y20 VSS151Y5 VSS152Y7 VSS153Y9 VSS154
1.0V
1V_DSP_B
R110 0.00 1206
F13VDD1 F14VDD2 F17VDD3 F18VDD4 F19VDD5 F6VDD6 F7VDD7 F8VDD8 F9VDD9 G10VDD10 G13VDD11 G14VDD12 G17VDD13 G18VDD14 G19VDD15 G6VDD16 G7VDD17 G8VDD18 G9VDD19 H18VDD20 H19VDD21 H6VDD22 H7VDD23 J18VDD24 J19VDD25 J6VDD26 J7VDD27 K6VDD28 K7VDD29 L6VDD30 L7VDD31 M18VDD32 M19VDD33 M6VDD34 M7VDD35 N18VDD36 N19VDD37 N6VDD38 N7VDD39 P6VDD40 P7VDD41 R6VDD42 R7VDD43 T18VDD44 T19VDD45 T6VDD46 T7VDD47 U10VDD48 U18VDD49 U19VDD50 U6VDD51 U7VDD52 V10VDD53 V13VDD54 V14VDD55 V17VDD56 V18VDD57 V19VDD58 V6VDD59 V7VDD60 V8VDD61 V9VDD62 W10VDD63 W13VDD64 W14VDD65 W17VDD66 W18VDD67 W19VDD68 W6VDD69 W7VDD70 W8VDD71 W9VDD72 VDD73 N4VDD_A1 VDD_A2 R3SCLK_VREF1 SCLK_VREF2 ADSP-TS201S BP576 A22VSS1 A24VSS2 A3VSS3 AA12VSS4 AA21VSS5 AA4VSS6 AB1VSS7 AB12VSS8 AB15VSS9 AB2VSS10 AB22VSS11 AB3VSS12 AC2VSS13 AC23VSS14 AD1VSS15 AD24VSS16 B2VSS17 B22VSS18 B23VSS19 B3VSS20 C1VSS21 C13VSS22 C2VSS23 C22VSS24 C3VSS25 D13VSS26 D21VSS27 D4VSS28 E16VSS29 E18VSS30 E20VSS31 E5VSS32 E7VSS33 E9VSS34 G2VSS35 G5VSS36 H1VSS37 H10VSS38 H11VSS39 H12VSS40 H13VSS41 H14VSS42 H15VSS43 H16VSS44 H17VSS45 H8VSS46 H9VSS47 J10VSS48 J11VSS49 J12VSS50 J13VSS51 J14VSS52 J15VSS53 J16VSS54 J17VSS55 J20VSS56 J3VSS57 J5VSS58 J8VSS59 J9VSS60 K10VSS61 K11VSS62 K12VSS63 K13VSS64 K14VSS65 K15VSS66 K16VSS67 K17VSS68 K8VSS69 K9VSS70 L10VSS71 L11VSS72 L12VSS73 L13VSS74 L14VSS75 L15VSS76 VSS77 ADSP-TS201S BP576 VSS78L17 VSS79L8 VSS80L9 VSS81M10 VSS82M11 VSS83M12 VSS84M13 VSS85M14 VSS86M15 VSS87M16 VSS88M17 VSS89M21 VSS90M22 VSS91M8 VSS92M9 VSS93N10 VSS94N11 VSS95N12 VSS96N13 VSS97N14 VSS98N15 VSS99N16 VSS100N17 VSS101N2 VSS102N8 VSS103N9 VSS104P10 VSS105P11 VSS106P12 VSS107P13 VSS108P14 VSS109P15 VSS110P16 VSS111P17 VSS112P3 VSS113P8 VSS114P9 VSS115R1 VSS116R10 VSS117R11 VSS118R12 VSS119R13 VSS120R14 VSS121R15 VSS122R16 VSS123R17 VSS124R22 VSS125R8 VSS126R9 VSS127T10 VSS128T11 VSS129T12 VSS130T13 VSS131T14 VSS132T15 VSS133T16 VSS134T17 VSS135T20 VSS136T5 VSS137T8 VSS138T9 VSS139U12 VSS140U13 VSS141U14 VSS142U15 VSS143U16 VSS144U17 VSS145U8 VSS146U9 VSS147V5 VSS148Y16 VSS149Y18 VSS150Y20 VSS151Y5 VSS152Y7 VSS153Y9 VSS154
0.00 1206
F13VDD1 F14VDD2 F17VDD3 F18VDD4 F19VDD5 F6VDD6 F7VDD7 F8VDD8 F9VDD9 G10VDD10 G13VDD11 G14VDD12 G17VDD13 G18VDD14 G19VDD15 G6VDD16 G7VDD17 G8VDD18 G9VDD19 H18VDD20 H19VDD21 H6VDD22 H7VDD23 J18VDD24 J19VDD25 J6VDD26 J7VDD27 K6VDD28 K7VDD29 L6VDD30 L7VDD31 M18VDD32 M19VDD33 M6VDD34 M7VDD35 N18VDD36 N19VDD37 N6VDD38 N7VDD39 P6VDD40 P7VDD41 R6VDD42 R7VDD43 T18VDD44 T19VDD45 T6VDD46 T7VDD47 U10VDD48 U18VDD49 U19VDD50 U6VDD51 U7VDD52 V10VDD53 V13VDD54 V14VDD55 V17VDD56 V18VDD57 V19VDD58 V6VDD59 V7VDD60 V8VDD61 V9VDD62 W10VDD63 W13VDD64 W14VDD65 W17VDD66 W18VDD67 W19VDD68 W6VDD69 W7VDD70 W8VDD71 W9VDD72 VDD73 N4VDD_A1 VDD_A2 R3SCLK_VREF1 SCLK_VREF2 ADSP-TS201S BP576 1000PF 1000PF 1000PF R109 0.00 1206
R113 0.00 1206
0.00 1206
R104 0.00 1206
IDC2X1
IDC2X1
IDC2X1
IDC2X1 2_5V_DSP_A
2_5V_DSP_B
2.5V
2.5V
R118 0.00 1206
R107 0.00 1206
IDC2X1
IDC2X1
A1V_DSP_B DSP_SCLK_VREF
A1V_DSP_A DSP_SCLK_VREF
DSP_VREF
DSP_VREF
1000PF
1000PF
1000PF
PLACE CLOSE PINS PLACE CLOSE PINS
ANALOG DEVICES
Approvals
Drawn Checked Engineering Size Board
3-1-2004_10:59
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE POWER A0178-2002
Sheet
Date
1.1C
2.5V
2.5V
ID[2-0] have internal 5Kohm pull-down resistors ID(2-0) Proc 2.5V
R115
R117
R120
R122
R123
R124
PLACE LABEL "HIGH" NEAR SW2.12 PLACE LABEL SIGNAL NAME NEXT PINS
ID2_A ID1_A ID0_A
ID2_B ID1_B ID0_B
Default
Default
THESE RESISTORS NEED VERY CLOSE POSSIBLE WOULD LIKE THEM BOTTOM BOARD ORGANIZED GROUPS SIMILAR SHOW HERE DEPENDING MUCH ROOM LEAVE NEAR THEM WOULD LIKE LABEL SOME THEM
R140
R141
R142
R144
R145
R146
BUSLOCK BM_A TMR0E_A BM_B TMR0E_B
2.5V
2.5V
SWT017 DIP6
SCLKRAT[2-0] have internal 5Kohm pull-down resistors R128 R127 R133 R126 R125 SCLKRAT(2-0) Ratio RESERVED
SCLKRAT2_A SCLKRAT1_A SCLKRAT0_A
SCLKRAT2_B SCLKRAT1_B SCLKRAT0_B
strap pins have internal 5Kohm pull-down resistors during reset Switch (Signal Pulled Low) Switch (Signal Pulled High) EPROM Boot External link port boot Disable interupts, level sensitive Enable interupts, edge sensitive TMR0E 1-bit Link Port Data Width 4-bit Link Port Data Width BUSLOCK SYSCON/SDRCON one-time writable SYSCON/SDRCON always writable indicates DEFAULT
Default Ratio CCLK 500MHz
Default Ratio CCLK 500MHz
KEEP STUB SIGNAL SMALL POSSIBLE
2.5V
L1BCMPO_A L2BCMPO_A R131 DEFAULT NORMAL CONTROLIMP0 internal 5Kohm pull-down resistor CONTROLIMP1 internal 5Kohm pull-up resistor CONTROLIMP(1:0) Driver Mode Normal Pulse Mode Mode Pulse Mode, Mode L3BCMPO_A REALLY (L1BCMP0_B)
L1BCMPO_B L2BCMPI_A L3BCMPO_B
CONTROLIMP0 CONTROLIMP1
R134
R106
R111
R114
R143
ENEDREG_A 2.5V 2.5V ENEDREG_B
R154
R132
R139 internal 5Kohm pull-down resistor have internal 5Kohm pull-up resistors DS(2-0) Drive Strength 11.1% 23.8% 36.5% 49.2% 61.9% 74.6% 87.3% 100% OUTPUT
DS2_A DS1_A DS0_A
DS2_B DS1_B DS0_B
DEFAULT
R135
R136
R137
R138
ANALOG DEVICES
Approvals
Drawn Checked Engineering Size Board
3-4-2004_10:58
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE CONFIG A0178-2002
Sheet
Date
1.1C
SDRAM 256Mb (32MB 64bits)
LABEL "SDRAM(LOW)"
D[0:63] A[0:18] SDA10 3.3V HDQM DQM0 DQM1 DQM2 DQM3 SDWE SDRAM_CS SDCKE SDRAM_CLK1 SDA10
FLASH (512Kbx8)
LABEL "SDRAM(HIGH)"
DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQ16 DQ17 DQ18 DQ19 DQ20 DQ21 DQ22 DQ23 DQ24 DQ25 DQ26 DQ27 DQ28 DQ29 DQ30 DQ31 AT49BV040 PLCC32RS SN74AHC1G00 SOT23-5 SN74AHC1G00 SOT23-5
DQ10 DQ11 DQ12
DQ13 DQ14 DQ15
SDRAM_CS SDCKE SDRAM_CLK0
DQ16 DQ17 DQ18 DQ19
SDWE
DQ20 DQ21 DQ22 DQ23
LDQM
DQM0 DQM1 DQM2 DQM3
DQ24 DQ25 DQ26 DQ27 DQ28
3.3V
DQ29 DQ30 DQ31
VDD1
VSS1 VSS2 VSS3 VSS4
VDD1 VDD2 VDD3 VDD4
VDD2 VDD3 VDD4
VSS1 VSS2 VSS3 VSS4 R155 0.00 MSSD[0:1] MSSD0 R149 0.00 MSSD1 SDRAM_CS
3.3V
3.3V
3.3V
VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8
VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8
VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8
VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8
C113 0.1UF
C112 0.1UF
C109 0.01UF
PLACE CLOSE (not critical)
SN74AHC1G00 SN74AHC1G00 AT49BV040
MT48LC4M32B2 TSOP86 3.3V
MT48LC4M32B2 TSOP86 3.3V
C129 0.01UF
C130 0.01UF
C132 0.01UF
C131 0.01UF
C136 0.01UF
C135 0.01UF
C133 0.01UF
C134 0.01UF
C140 0.01UF
C139 0.01UF
C137 0.01UF
C138 0.01UF
ANALOG DEVICES
Approvals
Drawn Checked Engineering
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE MEMORY
Board
3-4-2004_11:06
Size
SDRAM
SDRAM
Date
A0178-2002
Sheet
1.1C
KEEP THESE COMPONENTS OVER AGND PLANE
PLACE NEAR CONNECTOR
FER2 1206 10UF CAP002 5.76K 1206 INL-_AMPIN 120PF 1206 R148 57.6K 1206
KEEP TRACES SHORT POSSIBLE
100K 1206
100PF 1206
3.3V AGND LMV722M SOIC8 5.76K 1206 5.76K 1206 0.001UF 100PF 1206 INL-_AMPOUT 1206 INL-
LABEL "LINE
CON001 STEREO_JACK AUDIO_IN_LEFT LOOPBACK_LEFT LOOPBACK_RIGHT AUDIO_IN_RIGHT
VREF_AUDIO
LEFT
CAPLN CAPLP VINLP VINLN CASC XCTRL CCLK/{256~/512} COUT/{DF0} CIN/{DF1} CLATCH/{M~/S} LRCLK BCLK DOUT VREF
120PF 1206 AGND 750K 1206 1206 LMV722M SOIC8 AGND AGND FER1 1206 10UF CAP002 5.76K 1206 INR-_AMPIN MCLK 100K 1206 100PF 1206 120PF 1206 RESET MCLK RESET AD1871YRS SSOP28 AGND INR-_AMPOUT 1206 INRR147 57.6K 1206 INL+ 0.001UF
SLAVE MODE MCLK SAMPLE RATE MODE
VINRP VINRN CAPRN CAPRP
LRCLK BCLK
VREF_AUDIO
0.1UF
10UF
PLACE NEAR CONNECTOR
5.76K 1206
LMV722M SOIC8 5.76K 1206
0.001UF 100PF 1206
100PF 1206
100PF 1206 AGND
RIGHT
120PF 1206 AGND
0.01UF
0.01UF
0.01UF
0.01UF
750K 1206 LMV722M SOIC8 AGND AGND
0.001UF
KEEP THESE CLOSE AD1871
INR+ AGND
1206
LMV722M SOIC8
AGND PLANES SHOULD FROM
3.3V R179 0.00 1206
R157 2.00K 1206 WHEN USING ELECTRET MICROPHONE PLACE SW1.1 SW1.2 POSITION PLACE SW1.3 SW1.4 POSITION R156 2.00K 1206 R150 5.76K 1206 R152 5.76K 1206
AGND C147 0.1UF C146 0.1UF C145 0.1UF C148 0.1UF C249 0.1UF C149 0.1UF
PLACE RESISTOR BETWEEN AD1871 AD1854
VREF_AUDIO
LMV722M SOIC8
INR-_AMPIN
AUDIO_IN_RIGHT AUDIO_IN_LEFT INR-_AMPOUT INL-_AMPOUT AGND NEAR AGND NEAR AGND NEAR AGND AD1871 AD1871 AD1871
ANALOG DEVICES
Approvals
Drawn Checked Engineering Size Board
3-4-2004_10:58
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
SWT018 DIP4
ADSP-TS201S EZ-KIT LITE AUDIO A0178-2002
Sheet
INL-_AMPIN
Date
1.1C
KEEP THESE COMPONENTS OVER AGND PLANE
5.49K 1206 11.0K 1206 3.32K 1206
100PF 1206
AGND PLANES SHOULD FROM
LEFT
330PF 100PF 1206
68UF CAP003
96/48~ 384/256~ X2MCLK MCLK BCLK LRCLK SDATA FILTR FILTB 3.3V CCLK CLATCH CDATA ZEROL ZEROR 10UF 0.1UF 1206 10UF OUTROUTR+ OUTROUTR+ OUTLOUTL+ OUTLOUTL+
1206
5.49K 1206 680PF 1.65K 1206 LMV722M SOIC8 2200PF 1206 49.9K 1206
MCLK BCLK LRCLK
2.74K 1206 220PF 1206
LABEL "LINE OUT"
AGND VREF_AUDIO AGND LOOPBACK_LEFT LOOPBACK_RIGHT CON001 STEREO_JACK
RESET
RESET
DEEMP MUTE 11.0K 1206
5.49K 1206 3.32K 1206
100PF 1206
IDPM0 IDPM1 AD1854JRS SSOP28
AGND
RIGHT
100PF 1206
330PF
68UF CAP003
1206
SLAVE MODE MCLK SAMPLE RATE MODE
5.49K 1206
680PF
1.65K 1206
LMV722M SOIC8
2200PF 1206 49.9K 1206
2.74K 1206 220PF 1206 AGND
C142 0.1UF
C143 0.1UF
C153 0.1UF AGND
AGND AD1854 AD1854
AGND NEAR
ANALOG DEVICES
Approvals
Drawn Checked Engineering
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE AUDIO
Board
3-1-2004_10:59
Size
Date
A0178-2002
Sheet
1.1C
3.3V
3.3V
LABEL "FLAG0_A"
LABEL "IRQ_A"
3.3V 74LVC14A SOIC14 3.3V IRQ0_A_S
74LVC14A SOIC14
SWT013 SPST-MOMENTARY
74LVC14A SOIC14
SWT013 SPST-MOMENTARY
USB_CONFIGURED
LABEL "RESET"
3.3V 3.3V SWT013 SPST-MOMENTARY
RESET RESET
SN74AHC1G00 SOT23-5 RESET R130 0.00 DSP_RESET USB_RESET
LABEL "FLAG1_A"
LABEL "IRQ_B"
74LVC14A SOIC14 SWT013 SPST-MOMENTARY
R100
ADM708SAR SOIC8
74LVC14A SOIC14 CT10
IRQ0_B_S
SOFT_RESET
SWT013 SPST-MOMENTARY CT13
74LVC14A SOIC14 3.3V
3.3V RESET LED2 RED-SMT LED001 RESET LED8 RED-SMT LED001
LABEL "USB RESET"
3.3V
LABEL "RESET"
R112 R103 SWT013 SPST-MOMENTARY CT12 74LVC14A SOIC14
R160
R158
R159 USB_RESET RESET FLAG2_A FLAG2_B FLAG3_A FLAG3_B IDT74FCT3244APY SSOP20
1206
1206
LABEL "FLAG0_B"
74LVC14A SOIC14 74LVC14A SOIC14 74LVC14A SOIC14 3.3V 74LVC14A SOIC14
3.3V
FLAG3_B LED3 AMBER-SMT LED001
FLAG3_A/AUDIO LED6 AMBER-SMT LED001
FLAG2_B LED5 AMBER-SMT LED001
FLAG2_A LED4 AMBER-SMT LED001
POWER LED1 GREEN-SMT LED001
LABEL "FLAG1_B"
R101
R102
SW10 74LVC14A SOIC14 IRQ0_A_S IRQ0_B_S
FLAG0_A FLAG1_A FLAG0_B FLAG1_B IRQ0_A IRQ0_B 3.3V 3.3V 3.3V 3.3V 3.3V
1206
1206
1206
1206
R151 1206
SWT013 SPST-MOMENTARY CT11
LABEL "POWER" LABEL "FLAG3_B" LABEL "FLAG2_B" LABEL "FLAG3_A/AUDIO" LABEL "FLAG2_A"
Switch Pushbutton will drive net. Switch come from external source DEFAULT Switches
SWT017 DIP6
C114 0.1UF
C118 0.1UF
C111 0.1UF
C120 0.1UF
C144 0.1UF
ANALOG DEVICES
Approvals
Drawn
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE RESET/PB/LED
Board
3-1-2004_10:59
SN74AHC1G00 74LVC14
74LVC14 IDT74FCT3244APY ADM708
Checked Engineering
Size
Date
A0178-2002
Sheet
1.1C
Expansion Interface (TYPE
PLACE LABEL "EXPANSION INTERFACE (TYPE NEAR MIDDLE CONNECTOR
2.5V 2.5V 3.3V
WARNING: WHEN CONNECTING ANOTHER BOARD MAKE SURE CONNECTOR GOES CONNECTOR CROSSOVER CABLE
D[0:63] A[0:31] 45X2 CON019 IRQ1_A IRQ3_A IRQ1_B IRQ3_B FLAG1_A FLAG3_A FLAG1_B FLAG3_B CLKOUT_EXP SDCKE HDQM 45X2 CON019 BM_A IRQ0_A IRQ2_A IRQ0_B IRQ2_B TMR0E_A BUSLOCK IOEN L1DATO0_N_B L1CLKOUT_N_B L1BCMPO_B L1DATI0_N_B L1CLKIN_N_B L1BCMPI_B FLAG0_A FLAG2_A FLAG0_B FLAG2_B RESET L1DATO0_N_A L1CLKOUT_N_A L1BCMPO_A L1DATI0_N_A L1CLKIN_N_A L1BCMPI_A SDWE SDA10 LDQM MSSD0 DMAR3_B IOWR MSSD1 MSSD3 45X2 CON019 L3CLKOUT_P_A L3CLKOUT_N_A L3DATO0_P_A DMAR0 L3ACKI_A DMAR1_A L3DATO0_N_A DMAR2_B L3BCMPO_A IORD MSSD2 BM_B CON_RJ45
L1DATO0_P_B L1CLKOUT_P_B L1ACKI_B L1DATI0_P_B L1CLKIN_P_B L1ACKO_B BOFF L1DATO0_P_A L1CLKOUT_P_A L1ACKI_A L1DATI0_P_A L1CLKIN_P_A L1ACKO_A
LABEL "DSP
L3CLKIN_P_A L3CLKIN_N_A L3DATI0_P_A L3ACKO_A L3DATI0_N_A L3BCMPI_A CON_RJ45
LABEL "DSP
L3CLKOUT_P_B L3CLKOUT_N_B L3DATO0_P_B L3ACKI_B L3DATO0_N_B L3BCMPO_B CON_RJ45
LABEL "DSP
BRST L3CLKIN_P_B L3CLKIN_N_B L3DATI0_P_B L3ACKO_B L3DATI0_N_B L3BCMPI_B CON_RJ45
LABEL "DSP
ANALOG DEVICES
Approvals
Drawn Checked Engineering
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE EXPANSION
Board
3-1-2004_10:59
Size
Date
A0178-2002
Sheet
1.1C
3.3V
PLACE CLOSE
R129 AUDIOCLK
interface circuitry considered proprietary been omitted from this schematic. When designing your JTAG interface please refer Engineer Engineer Note EE-68 which found http://www.analog.com
3.3V
12.288MHZ OSC003 R182 R213 R214
R186 4.7K
PLACE CLOSE FPGA
R205 MCLK R206 BCLK R207 LRCLK LRCLK_S BCLK_S MCLK_S USB_TMS 3.3V USB_TCK D[0:23] FLAG3_A AUDIO_RD AUDIO_WRL AUDIO_EN ADUIO_DMAR AUDIO_SELECT AUDIO_D0 AUDIO_D1 AUDIO_D2 AUDIO_D3 AUDIO_D4 AUDIO_D5 AUDIO_D6 AUDIO_D7 AUDIO_D8 AUDIO_D9 AUDIO_D10 AUDIO_D11 AUDIO_D12 AUDIO_D13 AUDIO_D14 AUDIO_D15 AUDIO_D16 AUDIO_D17 AUDIO_D18 AUDIO_D19 AUDIO_D20 AUDIO_D21 AUDIO_D22 AUDIO_D23 LA_DATI0_P LA_DATI0_N LA_CLKIN_P LA_CLKIN_N LA_ACKO LA_BCOMPI LA_DATO0_P LA_DATO0_N LA_CLKO_P LA_CLKO_N LA_ACKI LA_BCOMPO L0DATI0_P_A L0DATI0_N_A L0CLKIN_P_A L0CLKIN_N_A L0ACKO_A L0BCMPI_A R208 0.00 C115 0.1UF C110 0.1UF C121 0.1UF C122 0.1UF TDO_A TDI_B 3.3V 3.3V 3.3V 3.3V OE_B ADG774A QSOP16 R183 IN_B OUT_B1 OUT_B2 OUT_B3 OUT_B4 OUT_B5 IDC7X2 USB_TDO USB_EMU 3.3V IN_A OUT_A1 OUT_A2 OUT_A3 OUT_A4 OUT_A5 R184 0.00 TCK_DSP_A R185 0.00 TCK_DSP_B SN74LVT244DW SOIC20 ADG774A QSOP16 R188 4.7K R210 0.00 TRST R161 0.00 R211 0.00 R212 0.00 R181 0.00
R203
R187
USB_TRST
USB_TDI
DMAR0
BCLK_S LRCLK_S
AUDIO_DOUT AUDIO_DIN AUDIO_BCLK AUDIO_LRCLK
MCLK_S
AUDIO_MCLK
AUDIOCLK
AUDIO_CLK
JTAG HEADER
OE_A
PLACE CLOSE FPGA PINS (CRITICAL)
DSP_RESET
0.00 DSP_RESET
R230 L0DATO0_P_A R231 L0CLKOUT_P_A L0CLKOUT_N_A L0BCMPO_A L0DATO0_N_A L0CLKOUT_P_A L0CLKOUT_N_A L0ACKI_A L0DATO0_P_A L0DATO0_N_A
IDT49FCT3805 QSOP20
R233 L0DATO0_P_B R232 L0CLKOUT_P_B L0CLKOUT_N_B L0DATO0_N_B
L0DATO0_P_B L0DATO0_N_B L0CLKOUT_P_B L0CLKOUT_N_B L0ACKI_B L0BCMPO_B
LB_DATI0_P LB_DATI0_N LB_CLKIN_P LB_CLKIN_N LB_ACKO LB_BCOMPI
LB_DATO0_P LB_DATO0_N LB_CLKO_P LB_CLKO_N LB_ACKI LB_BCOMPO
L0DATI0_P_B L0DATI0_N_B L0CLKIN_P_B L0CLKIN_N_B L0ACKO_B L0BCMPI_B
R180 0.00
R209 0.00 TDO_B
12.288MHz
IDT74FCT3244
QS3257
QS3257
ANALOG DEVICES
XC2S150E FT256
Cotton Road Nashua, 03063 1-800-ANALOGD
Approvals
Drawn Checked Engineering
Date
Title
ADSP-TS201S EZ-KIT LITE JTAG/FPGA
Board
3-4-2004_11:17
Size
Date
A0178-2002
Sheet
1.1C
SCHOT_RECT DO214AB UNREG_IN
2.5A FUS001
FER5 CHOKE_COIL
1000PF 1206 S2A_RECT DO-214AA FER7 1206
7_5V_POWER CON005 2.5MM_JACK
1000PF 1206 FER6 1206
SHGND SHGND SHGND
1.8V UNREG_IN 3.3V R234 332K OUT1 OUT2 OUT3 INPUT OUTPUT ADP3331ART SOT23-6 R178 0.00 1206 FER3 1206 R202 0.00 1206 UNREG_IN INPUT OUTPUT ADP3339AKC-33 SOT-223 CT23 10UF C248 0.1UF 3.3V
ADP3336ARM MSOP8
R190 210K
0.47UF
0.47UF
R192 340K
R228 100K 1206
CT22 10UF
C247 0.1UF
R191 64.9K
R201 698K
AGND
2.5V UNREG_IN UNREG_IN CMDSH-3 100MA SOD-323 SHDN SYNC BOOST 2200PF 1206 SL22 DO-214AA R105 2.55K CT16 100UF 4.7UF 0.1UF CT14 150UF 220PF 1206 R218 0.1UF 0.18UF 1.5UH IND003 1.5V R219 0.01 2512
IND004 1.0V
R227 10.5K 1206
0.1UF R225 13.0K 1206 2.2UF
47PF 1206
FDS6375 SOIC8 SYNC/FCB RUN/SS
SENSE
LT1765 SO-8
R222 10.0K 1206
SI9804DY SOIC8 R220 35.7K
LTC1773 MSOP10 CMDSH-3 100MA SOD-323 R226 0.00 SHDN SYNC BOOST 2200PF 1206 SL22 DO-214AA R217 10.7K 1206 CT17 100UF 4.7UF 0.18UF 1.5UH IND003 R189 0.00 1206 100PF 1206 2.5V R221 80.6K
MBRS340T3 DIO002
CT15 680UF
4.7UF
UNREG_IN
100PF 1206
2.2UF
LT1765 SO-8
R216 10.0K 1206
ANALOG DEVICES
Approvals
Drawn Checked Engineering Size Board
3-1-2004_10:59
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE POWER A0178-2002
Sheet
Date
1.1C
1V_DSP_A
(1.0V) Bypass Caps (per DSP) 0.01uF 0.1uF 100uF
C173 1000PF
C174 1000PF
C175 1000PF
C176 1000PF
C177 1000PF
C178 1000PF
C179 1000PF
C180 1000PF
C219 0.01UF
C218 0.01UF
C216 0.01UF
C220 0.01UF
C221 0.1UF
C222 0.1UF
C223 0.1UF
C224 0.1UF
C225 0.1UF
1V_DSP_B
BYPASS CAPS SHOULD PLACED CLOSE POSSIBLE CORISPONDING TRACES FROM COMPONENT CAPACITOR FROM CAPACITOR SHOULD SHORT POSSIBLE PRIORITY PLACEMENT: 1V_DSP_X 1_5V_DSP_X 2_5V_DSP_X
C206 1000PF
C196 1000PF
C207 1000PF
C208 1000PF
C209 1000PF
C210 1000PF
C195 1000PF
C211 1000PF
C203 0.01UF
C204 0.01UF
C205 0.01UF
C202 0.01UF
C201 0.1UF
C200 0.1UF
C199 0.1UF
C198 0.1UF
C197 0.1UF
1_5V_DSP_A 1_5V_DSP_B
VDD_DRAM (1.5V) Bypass Caps (per DSP) 0.01uF 0.1uF 100uF
1000PF
C168 1000PF
C169 1000PF
C170 1000PF
C171 1000PF
C172 1000PF
0.01UF
C167 0.01UF
C165 0.1UF
C166 0.1UF
0.1UF
0.1UF
C212 1000PF
C226 1000PF
C217 1000PF
C215 1000PF
C214 1000PF
C213 1000PF
C232 0.01UF
C227 0.01UF
C229 0.1UF
C228 0.1UF
C230 0.1UF
C231 0.1UF
2_5V_DSP_A
2_5V_DSP_B
VDD_IO (2.5V) Bypass Caps (per DSP) 0.01uF 0.1uF 100uF
C194 1000PF
C193 1000PF
C192 1000PF
C191 1000PF
C190 1000PF
C189 1000PF
C188 1000PF
C186 1000PF
C181 0.01UF
C183 0.01UF
C182 0.1UF
C187 0.1UF
C185 0.1UF
C184 0.1UF
C234 1000PF
C246 1000PF
C236 1000PF
C245 1000PF
C233 1000PF
C244 1000PF
C243 1000PF
C235 1000PF
C242 0.01UF
C240 0.01UF
C241 0.1UF
C237 0.1UF
C238 0.1UF
C239 0.1UF
ANALOG DEVICES
Approvals
Drawn Checked Engineering
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE BYPASS
Board
3-1-2004_10:59
Size
Date
A0178-2002
Sheet
1.1C
3.3V 3.3V PROGRAM_D0 PROGRAM_D1 PROGRAM_D2 PROGRAM_D3 PROGRAM_D4 PROGRAM_D5 PROGRAM_D6 PROGRAM_D7
C155 0.1UF
C156 0.1UF
C157 0.1UF
C162 0.1UF
C158 0.1UF
C159 0.1UF
C160 0.1UF
C161 0.1UF
C154 10UF
0.01UF
0.01UF
0.01UF
0.01UF
0.01UF
10UF
C100 10UF
R194
R195
PROGRAM PROGRAM_CCLK PROGRAM_CS PROGRAM_WR
FPGA_M0 FPGA_M1 FPGA_M2
SPARTANIIe FPGA
3.3V
2.5V 1.8V
2.5V
0.01UF
0.01UF
0.01UF
0.01UF
0.01UF
0.01UF
0.01UF
0.01UF
0.01UF
C164 10UF
0.1UF
0.1UF
0.1UF
0.1UF
0.1UF
0.1UF
C163 10UF
1.8V
VCCO1_B0 VCCO2_B0 VCCO3_B0 VCCO4_B1 VCCO5_B1 VCCO6_B1 VCCO7_B2 VCCO8_B2 VCCO9_B2 VCCO10_B3 VCCO11_B3 VCCO12_B3 VCCO13_B4 VCCO14_B4 VCCO15_B4 VCCO16_B5 VCCO17_B5 VCCO18_B5 VCCO19_B6 VCCO20_B6 VCCO21_B6 VCCO22_B7 VCCO23_B7 VCCO24_B7
PROGRAM_INIT PROGRAM_DONE
FPGA_TCK FPGA_TDI FPGA_TDO FPGA_TMS
GND1 GND2 GND3 GND4 GND5 GND6 GND7 GND8 GND9 GND10 GND11 GND12 GND13 GND14 GND15 GND16
SPARTANIIe FPGA
SPARTANIIe FPGA VCCINT1 VCCINT2 VCCINT3 VCCINT4
GND17 GND18 GND19 GND20 GND21 GND22 GND23 GND24 GND25 GND26 GND27 GND28
VCCINT5 VCCINT6 VCCINT7 VCCINT8 VCCINT9 VCCINT10 VCCINT11 VCCINT12
XC2S150E FT256
ANALOG DEVICES
Approvals
Drawn Checked Engineering
Cotton Road Nashua, 03063 1-800-ANALOGD
Date
Title
ADSP-TS201S EZ-KIT LITE CONTROLLER
Board
3-1-2004_10:59
Size
Date
A0178-2002
Sheet
1.1C
INDEX
Symbols ~BMS, boot memory select pin, 2-3, ~MS0, memory bank zero pin, 2-3, AD1854, AD1871, Hardware Wizard, Windows ADSP-TS201S processor clock frequency, 3-12 core speed, core voltage, drive strength, 3-15 driver modes, 3-14 external Flash memory, impedance selection, 3-14 input clock, internal memory, memory map, memory restrictions, SDRAM interface, amplification, analog-to-digital converters (ADCs), audio
amplification, connectors (P1, P2), 3-20 data transfer, interface, also AD1854 also AD1871 bill materials, board peripherals, boot code, memory select (~MS0), memory space, strap settings, broadcast, control configuration, clock frequency, 3-12 generator (U1), 3-3, 3-12 modes, 3-12 ratios, 3-12 configuration resistors, 3-10 connecting, EZ-KIT Lite board, connectors, 1-5, 3-19
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
INDEX
J1-J3 (expansion interface), 3-4, 3-21 J4-J7 (link ports), 3-22 (audio), 3-6, 3-20 (audio), 3-20 (power), (JTAG), 3-4, 3-21 (USB), 1-7, 3-21 contents, EZ-KIT Lite package, control impedance, 3-14 CONTROLIMP resistors, 3-14 conventions, manual, -xix core power regulator, current limit, customer support, -xiv data (D23-0), memory, transfer, Device Manager window, 1-15 digital-to-analog converters (DACs), switches switches DMAR0 cycle, DRAM, drive strength, 3-15 2-7, 2-8, 3-10, 3-15 2-8, 3-10, 3-15 electrostatic discharge, emulation, 2-2,
port, space, EPROM boot, example programs, expansion header, interface, 3-3, 3-21 external interface regulator, interrupts, memory, 2-3, ports, external regulator, EZ-KIT Lite board architecture, features, features, EZ-KIT Lite board, field-programmable gate arrays (FPGAs), 2-7, FLAG LEDs (LED3-6), 3-17 pins, 2-5, 3-17, 3-18 push buttons (SW6-9), 3-18 source switch (SW10), FLAG0 signal, 2-5, 2-6, 3-18 FLAG1 signal, 2-5, 2-6, 3-18 FLAG2 signal, 2-5, 2-6, 3-17 FLAG3 signal, 2-5, 2-6, 2-7, 3-17 FLAGREG register, flash memory, 2-4, programmer utility,
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
INDEX
Found Hardware Wizard Windows 2000, 1-14 general-purpose Help, online, xvii, host, installation, summary, installing EZ-KIT Lite driver, VisualDSP++ EZ-KIT Lite license, software, interface connectors, internal DRAM power regulator, memory, 2-2, 2-3, interrupt enable settings, mode switch (SW10), modes, pins, 2-6, 3-18 push buttons (SW4, SW5), 3-18 power regulator, push buttons, 3-18 IRQ0_A (SW4) interrupt pin, 2-7, 3-18 IRQ0_B (SW5) interrupt pin, 2-7, 3-18
JTAG emulation port, emulator, header, 3-21 jumper settings, L0CLKIN pins, LEDs, LED1 (power), 1-6, 3-16 LED2 (USB reset), 1-6, 3-17 LED3 (FLAG3_B), 2-5, 2-6, 3-17 LED4 (FLAG2_A), 2-5, 2-6, 3-17 LED5 (FLAG2_B), 2-5, 2-6, 3-17 LED6 (FLAG3_A), 2-5, 2-6, 3-17 LED8 (processor reset), 1-6, 1-15, 3-17 LED9 (USB monitor), 1-15, 1-16, 3-17 license restrictions, link ports, 2-8, loader file, LVDS signaling, master processor, 3-10 memory blocks, flash memory map, ADSP-TS201S processor microphone,
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
INDEX
networking cable, noise, oscillator (U18), 3-3, 3-12 package contents, configuration, peripheral interfaces, 3-21 power connector (P3), 3-20 (LED1), 3-16 supply, 3-22 processor 2-3, 3-10 program memory, programmable FLAG pins FLAG pins push buttons (reset), 3-19 (interrupt), 2-6, 3-18 (interrupt), 2-6, 3-18 (FLAG0_B), 2-6, 3-18 (FLAG1_B), 2-6, 3-18 (FLAG1_A), 2-6, 3-18 (FLAG0_A), 2-6, 3-18 registering, this product, 1-2, reset LEDs (LED2, LED8), 3-17 push button (SW3), 3-19
resistors, 3-10, 3-12, 3-14 locations 3-10 RJ-45 connectors, 2-8, 3-22 SCLKRAT bit, 3-3, 3-12 SDRAM, default values, memory, registers, SDRCON registers, 2-4, setting EZ-KIT Lite hardware, simulator session, registers, specifications, power connector, 3-22 SQSTAT registers, starting VisualDSP++, 1-16 switches, SW1, SW10, SW2, 3-7, SW6-9, 2-5, SYSCON registers, 2-4, system architecture, EZ-KIT Lite board, requirements, cable, 1-2, connector (P7), 3-21 debug monitor, 2-4, driver installation, Windows 2000, 1-12
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
INDEX
driver installation, Windows driver installation, Windows 1-13 interface, 3-17 monitor (LED9), 3-17 port, verifying driver installation, 1-15 VisualDSP++
documentation, xviii Flash Programmer utility, installation, license, online Help, xvii requirements, starting, 1-16 voltage regulators,
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
INDEX
ADSP-TS201S EZ-KIT Lite Evaluation System Manual

Revision 1.0, March 2004 Part Number 82-000770-01 Copyright Infor

Top Searches for this datasheet

Other recent searches