61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter Audi
|
|
|
Top Searches for this datasheet
2015, 2016 2015-P
61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter
Audio analyzing Total Harmonic Distortion DMMs
Model 2015-P Audio Analyzing Digital Multimeter Models 2015 2016 Total Harmonic Distortion Multimeters combine audio band quality measurements analysis with fullfunction 61/2-digit DMM. Test engineers make broad range voltage, resistance, current, frequency, distortion measurements, with same compact, half-rack measurement instrument. Model 2016 twice sine wave generator output Model 2015 applications that require test signals greater than 8Vrms. Model 2015-P offers additional processing capacity frequency spectrum analysis. Frequency Domain Distortion Analysis applications such assessing non-linear distortion components, devices, systems, DSPbased processing allows Models 2015-P, 2015, 2016 provide frequency domain analysis conventional time domain instruments. They measure Total Harmonic Distortion (THD) over complete 20Hz 20kHz audio band. They also measure over wide input range 750Vrms) have residual distortion (-87dB). reading expressed either decibels percentage. addition THD, Models 2015-P, 2015, 2016 compute THD+Noise Signal-to-Noise plus Distortion (SINAD). analyses which individual harmonics criteria greatest interest, instruments report harmonic magnitudes that included distortion measurements. user program actual number harmonics included computation, accuracy, speed, complexity optimized specific application. Optimized Production Testing Models 2015-P, 2015, 2016 perform fast frequency sweeps characterizing audio-band circuitry production test systems. example, instruments execute single sweep frequencies transmit both voltage readings readings computer only seconds. With that data, complete frequency response analysis harmonic distortion frequency analysis performed very short time. Thus high speed testing audio performance high volume device such cellular telephone performed without reducing number tests reducing measurements each test. With these instruments, which optimized production testing, test engineers lower test times, comparison test speeds achievable with general purpose audio analyzers, without sacrificing production test quality. Dual Output Source Models 2015-P, 2015, 2016 include internal audio band sine wave source generating stimulus signals. second output, inverse first output, also available, simplifying testing differential input circuits common mode noise cancellation performance. Models 2015 2015-P have 4Vrms singleended output 8Vrms differential source output. tests that require higher stimulus signal, Model 2016 provides 9.5Vrms single-ended output 19Vrms differential output.
THD, THD+Noise, SINAD measurements 20Hz-20kHz sine wave generator Fast frequency sweeps 2015-P: Identifies peak spectral components 2015: 4Vrms single-ended 8Vrms differential output 2016: 9.5Vrms single-ended 19Vrms differential output Individual harmonic magnitude measurements standard audio shaping filters functions (61/2 digits)
APPLICATIONS
Wireless communication device audio quality testing Component linearity testing Lighting ballast limit conformance testing Telephone automotive speaker testing
1.888.KEITHLEY
(U.S. only)
www.keithley.com
2015, 2016 2015-P
Ordering Information
2015
61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter
Wide Selection Audio Filters Five industry-standard bandpass filters provided shaping input signal audio telecommunication applications. Available filters include CCITT weighting filter, CCIR filter, C-message filter, CCIR/ARM filter, weighting filter. Models 2015-P, 2015, 2016 provide programmable, high cutoff (low pass) cutoff (high pass) filters. Furthermore, filters implemented together form bandpass filter. programmable filters used filter noise generated electromechanical machinery production floor simulate other types system transmission characteristics. Broad Measurement Flexibility addition their THD, THD+Noise, SINAD, individual harmonic measurement capabilities, instruments provide comprehensive functions, including DCV, ACV, DCI, ACI, temperature, frequency, period, dBm, continuity measurements, well diode testing. This multi-functional design minimizes added equipment costs when configuring test setups.
Audio analyzing Total Harmonic Distortion DMMs
Total Harmonic Distortion 61/2-Digit Multimeter 2015-P Audio Analyzing 2016 Total Harmonic Distortion 61/2-Digit w/9V Source Output
These products available with Extended Warranty. Accessories Supplied Model 1751 Safety Test Leads, User Manual, Service Manual.
Figure Total Harmonic Distortion Analysis Frequency Response Portable Wireless Telecommunication Device
Device Under Test
Figure 2nd, 3rd, Harmonics Function Frequency
THD: Levels relative fundamental: harmonic harmonic harmonic
Relative Output Level (dB)
Output Transducer Input Transducer
-100
1000
10000
Source Output
Signal Input
Frequency,
2015 MULTIMETER
Figure Frequency Response
Model 2015
Figures demonstrate Model 2015-P, 2015, 2016 provide both time domain frequency domain measurements single test protocol. Figure shows sample test system schematic with telecommunication device loop back mode test. Model 2015 source provides stimulus frequency sweep, Model 2015 measures response from microphone circuit. Figure shows resulting frequency domain analysis first three harmonics function frequency. Figure shows time domain analysis microphone circuit output voltage function frequency.
Relative Output (dB)
1000 10000
Frequency (Hz)
1.888.KEITHLEY
(U.S. only)
www.keithley.com
2015, 2016 2015-P
Wide Band Narrow Band Noise Measurements Models 2015-P, 2015, 2016 capable measuring both wide band noise narrow band noise. Alternatively, these instruments' (digital signal processing) capabilities allow users make frequency domain measurements voltage noise over 20Hz-20kHz frequency audio band narrow portion band. Furthermore, noise measurements extracted presence stimulus signal fast signal-to-noise computations. Spectrum Analysis Model 2015-P internal computational capabilities that allow characterize acquired signal spectrum. This instrument identify report frequency amplitude highest value complete spectrum within specified frequency band. also identify additional peaks descending order magnitude. Model 2015-P's on-board capabilities make simple obtain thorough analysis frequency spectrum more quickly with little need external analysis software.
61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter
Figure Model 2015-P directly identifies peak values frequency spectrum.
Frequency Spectrum
Maximum peak peak Maximum left peak peak Maximum right peak
-100 -120 1.0kHz
1.1kHz
1.2kHz
1.3kHz
1.4kHz
Frequency
ACCESSORIES AVAILABLE
CABLES/ADAPTERS
7007-1 7007-2 8501-1, 8501-2 8502 8503 7009-5 4288-1 4288-2 Shielded IEEE-488 Cable, (3.3 Shielded IEEE-488 Cable, (6.6 Trigger-Link Cables, (3.3 ft), (6.6 Trigger Link Adapter Trigger Link Cable male BNCs,1m (3.3 RS-232 Cable Single Fixed Rack Mount Dual Fixed Rack Mount
OTHER
KPCI-488 KPC-488.2AT KPC-TestPoint 1050 2015-EW 2015-P-EW 2016-EW IEEE-488 Interface/Controller IEEE-488 Interface Card PC/AT (full slot) Trigger Master Interface Test Development Software Padded Carrying Case Year Warranty Extension Year Warranty Extension Year Warranty Extension
RACK MOUNT KITS
1.888.KEITHLEY
(U.S. only)
www.keithley.com
Audio analyzing Total Harmonic Distortion DMMs
Between 1.0kHz 1.4kHz
Magnitude (dBV)
2015, 2016 2015-P
61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter
GENERATOR CHARACTERISTICS
FREQUENCY RANGE: 10-20kHz. FREQUENCY RESOLUTION: 0.007Hz. FREQUENCY ACCURACY: ±(0.015% reading 0.007Hz)1. FREQUENCY TEMPERATURE COEFFICIENT: <100ppm over operating temperature range.
DISTORTION CHARACTERISTICS
VOLTAGE RANGE: 100mV 100V 750V (user selectable). INPUT IMPEDANCE: paralleled <100pF. DISPLAY RANGE: 0-100% 0-100.00dB. RESOLUTION: 0.0001% 0.00001dB. FUNDAMENTAL FREQUENCY RANGE: 20Hz-20kHz. HARMONIC FREQUENCY RANGE: 40Hz-50kHz. FREQUENCY RESOLUTION: 0.008Hz. FREQUENCY ACCURACY: ±0.01% reading. FREQUENCY TEMPERATURE COEFFICIENT: 100ppm over operating temperature range. MEASUREMENT ACCURAC RESIDUAL MODE Year, 23°C ±5°C) DISTORTION1 individual harmonic magnitudes SINAD Level ±0.8dB, 20Hz 20kHz2 ±1.5 100Hz 20kHz2 ±1.5dB 100Hz 20kHz2 ±(0.13% reading 0.009% range) 20Hz 20kHz 0.004% -87dB 20Hz 20kHz 0.056% -65dB 20Hz 20kHz +65dB 20Hz 20kHz
Model 2015, 2015-P, 2016 Specifications
SOURCE OUTPUT:
2015-P, 2015: 600) 2016: 600) 9.5V AMPLITUDE RESOLUTION: 2015-P, 2015: 0.5mV 600) 2016: 1.25mV 600) 2.5mV AMPLITUDE ACCURACY: 2015-P, 2015: ±(0.3% setting 2mV)1, 2016: ±(0.3% setting 5mV)1, AMPLITUDE TEMPERATURE COEFFICIENT: Typically 0.015%/°C. AMPLITUDE FLATNESS: ±0.1dB1, OUTPUT IMPEDANCE: user selectable. THD: -64dB6. NOISE: 2015-P, 2015: 100µV rms2. 2016: 250µV rms2. OFFSET VOLTAGE: 2015-P, 2015: ±1.2mV1. 2016: ±3mV1. WAVEFORM: Sinewave. AMPLITUDE RANGE:
DISTORTION MEASUREMENT AUDIO FILTERS
None C-Message CCITT Weighting CCIR/ARM CCIR Weighting NUMBER HARMONICS INCLUDED CALCULATION: (user selectable). CUTOFF FILTERS (bus settable): 20Hz-50kHz. combined form brickwall bandpass filter.
INV/PULSE OUTPUT (SINEWAVE MODE):
FREQUENCY: Same source output. AMPLITUDE RANGE: 2015-P, 2015: 600) 2016: 600) 9.5V AMPLITUDE RESOLUTION: 2015-P, 2015: 0.5mV 600) 2016: 1.25mV 600) 2.5mV AMPLITUDE ACCURACY: 2015-P, 2015: ±(2.0% setting 2mV)1, 2016: ±(2.0% setting 5mV)1, AMPLITUDE FLATNESS: ±0.1dB1, OUTPUT IMPEDANCE: Same Source Output setting. THD: -64dB6. NOISE: 2015-P, 2015: 100µV rms2. 2016: 250µV rms2. OFFSET VOLTAGE: 2015-P, 2015: ±1.1mV typ., ±13mV max.1 2016: ±3mV typ., ±13mV max.1
DISTORTION MEASUREMENT READING RATE3
FUNDAMENTAL FREQUENCY ACQUISITION MODE Single acquisition stored value Automatic FUNDAMENTAL FREQUENCY RANGE MINIMUM READINGS SECOND
INV/PULSE OUTPUT (PULSE MODE):
FREQUENCY: Same source output. DUTY CYCLE: ±3%. OUTPUT IMPEDANCE: Same output impedance source output. AMPLITUDE: 0.0V ±0.07V 4.9V ±0.12V pulse open circuit1, 0.0V ±0.05V 3.3V ±0.08V pulse load1, OVERSHOOT: 1.0V maximum pulse open circuit3. 0.2V maximum with load pulse open circuit3. UNDERSHOOT: 1.1V maximum pulse open circuit3. 0.45V maximum with load pulse open circuit3.
FREQUENCY SWEEP READING RATE
NUMBER FREQUENCIES TIME (seconds)4
NOTES
Input signal full scale. range harmonics >-65dB. Speeds default operating conditions (*RST), display off, auto range off, binary data transfer, trig delay Typical times: frequencies 400-4kHz range, binary data transfer, TRIG DELAY Display OFF, Auto Range OFF. Data returned measurement plus voltage.
NOTES
year, 23°C ±5°C. Measured VOUT with gain amplifier 2-pole 50kHz pass filter, Inv/Pulse sinewave mode, output impedance, load. With output impedance coaxial cable. output impedance, load. output. measurement includes harmonics through output, load.
1.888.KEITHLEY
(U.S. only)
www.keithley.com
2015, 2016 2015-P
Characteristics
CONDITIONS: PLC)1 SLOW PLC) PLC) WITH FILTER
61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter
ACCURACY: ±(PPM READING RANGE) (PPM PARTS MILLION) (E.G., 10PPM 0.001%) TEST CURRENT BURDEN VOLTAGE INPUT RESISTANCE 0.15 0.03 HOUR 23°C 1000 23°C 1500 1200 YEAR 23°C 1500 1200 TEMPERATURE COEFFICIENT 0°-18°C 28°-50°C
FUNCTION VOLTAGE
RANGE
RESOLUTION
RESISTANCE
100.0000 1.000000 10.00000 100.0000 1.000000 10.00000 100.0000
CURRENT
10.00000 100.0000 1.000000 3.00000 3.00000 10.00000 10.00000
CONTINUITY DIODE TEST
OPERATING CHARACTERISTICS
FUNCTION (all ranges), (all ranges), Ohms (<10M range) DIGITS 61/2 61/2 61/2 51/2 51/2 51/2 41/2 READINGS/s 1000 2000 PLCs 0.04 0.01
SPEED NOISE REJECTION
RATE 0.01 READINGS/S 2000 DIGITS 61/2 61/2 51/2 41/2 NOISE RANGE NMRR CMRR
SYSTEM SPEEDS
RANGE CHANGE FUNCTION CHANGE AUTORANGE TIME ASCII READINGS RS-232 (19.2K BAUD): MAX. INTERNAL TRIGGER RATE: 2000 MAX. EXTERNAL TRIGGER RATE:
NOTES
following range accuracy specification based range:1V 100V 2ppm; 100mV 15ppm; 100, 15ppm; <1M, 2ppm; 10mA 2ppm; 100mA, 20ppm. Speeds operation using factory default operating conditions (*RST). Autorange off, Display off, Trigger delay Speeds include measurement binary data transfer GPIB. Auto zero off. Sample count 1024, auto zero off. Auto zero off, NPLC 0.01. Ohms readings/second. 16.67ms 60Hz, 20ms 50Hz/400Hz. frequency automatically determined power signal levels >500V 0.02ppm/V uncertainty portion exceeding 500V 120ms ohms. Must have matching lead resistance Input line frequency ±0.1%. unbalance lead. Relative calibration accuracy. Specifications 4-wire ohms 2-wire ohms with function.
GENERAL
LINEARITY 10VDC RANGE: ±(2ppm reading 1ppm range). DCV, TEMPERATURE, CONTINUITY, DIODE TEST INPUT PROTECTION: 1000V ranges. MAXIMUM LEAD RESISTANCE: range lead ranges; lead other ranges. CURRENT INPUT PROTECTION: 250V fuse. SHUNT RESISTOR: 100mA ranges. 10mA range. CONTINUITY THRESHOLD: Adjustable 1000. AUTOZERO ERROR: ±(2ppm range error 5µV) minutes ±1°C change. OVERRANGE: 120% range except 1000V Diode.
1.888.KEITHLEY
(U.S. only)
www.keithley.com
Model 2015, 2015-P, 2016 Specifications
100.0000 1.000000 10.00000 100.0000 1000.000
2015, 2016 2015-P
61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter
CALIBRATION CYCLE Days Year TEMPERATURE COEFFICIENT 0.35 0.03 0.35 0.03 0.035 0.003 0.30 0.04 0.35 0.06 0.035 0.006 ACCURACY reading range), 23°C kHz- kHz- 0.05 0.03 0.06 0.03 0.005 0.003 0.10 0.04 0.15 0.06 0.015 0.006 0.11 0.05 0.12 0.05 0.006 0.005 0.60 0.08 0.60 0.08 0.01 0.006 kHz- 0.03 0.01
True Voltage Current Characteristics
VOLTAGE RANGE 100.0000 1.000000 10.00000 100.0000 750.000 RESOLUTION
Model 2015, 2015-P, 2016 Specifications
CURRENT RANGE 1.000000 3.00000
RESOLUTION
CALIBRATION CYCLE Day/1 Year Day/1 Year TEMPERATURE COEFFICIENT
HIGH CREST FACTOR ADDITIONAL ERROR reading)
CREST FACTOR: ADDITIONAL ERROR: 0.05 0.15 0.30 0.40
SYSTEM SPEEDS
FUNCTION/RANGE CHANGE 4/s. AUTORANGE TIME: <3s. ASCII READINGS RS-232 (19.2K BAUD) 50/s. MAX. INTERNAL TRIGGER RATE 300/s. MAX. EXTERNAL TRIGGER RATE 260/s.
OPERATING CHARACTERISTICS
FUNCTION (all ranges), (all ranges) DIGITS 61/2 61/2 61/2 61/2 61/2 READINGS/s 2s/reading RATE SLOW FAST FAST BANDWIDTH Hz-300 Hz-300 Hz-300 Hz-300 Hz-300
GENERAL
INPUT IMPEDANCE: paralleled <100pF. INPUT PROTECTION: 1000Vp. MAXIMUM DCV: 400V range. INPUT PROTECTION: 250V fuse. BURDEN VOLTAGE: Range: <0.3V rms. Range: rms. SHUNT RESISTOR: ranges. CMRR: >70dB with lead. MAXIMUM CREST FACTOR: full scale. VOLT HERTZ PRODUCT: OVERRANGE: 120% range except 750V ranges.
ADDITIONAL FREQUENCY ERRORS reading)
20Hz 30Hz 50Hz 100Hz 200Hz 30Hz 50Hz 100Hz 200Hz 300Hz 300Hz SLOW FAST 0.18 0.10
NOTES
Specifications SLOW rate sinewave inputs range. Speeds operation using factory default operating conditions (*RST). Auto zero off, Auto range off, Display off, includes measurement binary data transfer GPIB. 0.01% step settling error. Trigger delay 400ms. Trigger delay DETector:BANDwidth 300, NPLC 0.01. Maximum useful limit with trigger delay 175ms. Applies non-sinewaves >5Hz. Applies 0°-18°C 28°-50°C.
1.888.KEITHLEY
(U.S. only)
www.keithley.com
2015, 2016 2015-P
Triggering Memory
61/2-Digit Multimeters 61/2-Digit Audio Analyzing Multimeter
Temperature Characteristics
THERMOCOUPLE TYPE RANGE -200 760°C -200 1372°C -200 400°C RESOLUTION 0.001°C 0.001°C 0.001°C DAY/1 YEAR (23°C 5°C) ACCURACY Relative Reference Junction ±0.5°C ±0.5°C ±0.5°C
READING HOLD SENSITIVITY: 0.01%, 0.1%, reading. TRIGGER DELAY: (1ms step size). EXTERNAL TRIGGER LATENCY: 200µs <300µs jitter with autozero off, trigger delay MEMORY: 1024 readings.
Math Functions
Rel, Min/Max/Average/StdDev stored reading), dBm, Limit Test, mX+b with user defined units displayed. REFERENCE RESISTANCES: 9999 increments.
TEMPERATURE NOTES
temperatures <-100°C, ±0.1°C >900°C ±0.3°C. Temperature displayed Accuracy based ITS-90. Exclusive thermocouple error.
Standard Programming Languages
SCPI (Standard Commands Programmable Instruments)
GENERAL
POWER SUPPLY: 100V 120V 220V 240V ±10%. LINE FREQUENCY: 45Hz 66Hz, automatically sensed power-up. POWER CONSUMPTION: OPERATING ENVIRONMENT: Specified 50°C. Specified R.H. 35°C. STORAGE ENVIRONMENT: -40°C 70°C. WARRANTY: years. SAFETY: Conforms with European Union Directive 73/23/EEC, 610110-1, 3111-1. EMC: Conforms with European Union Directive 89/336/EEC, 55011, 50082-1, 61000-32, 61000-3-3, part class WARMUP: hour rated accuracy. DIMENSIONS: Rack Mounting: 89mm high 213mm wide 370mm deep (31/2 83/8 149/16 in). Bench Configuration (with handle feet): 104mm high 238mm wide 370mm deep (41/8 93/8 149/16 in). WEIGHT: 4.2kg (8.8 lbs). SHIPPING WEIGHT: lbs). VOLT HERTZ PRODUCT:
Remote Interface
GPIB (IEEE-488.1, IEEE-488.2) RS-232C.
Frequency Period Characteristics
RANGE FREQUENCY RANGE PERIOD RANGE GATE TIME (SLOW) (MED) (FAST) RESOLUTION ±(ppm reading) 0.333 3.33 33.3 ACCURACY DAY/1 YEAR reading) 0.01 0.01 0.01
FREQUENCY NOTES
Specifications squarewave inputs >10% range, except 100mV range. 100mV range frequency must >10Hz voltage <20mV overrange ranges except 750V range.
1.888.KEITHLEY
(U.S. only)
www.keithley.com
Model 2015, 2015-P, 2016 Specifications
Other recent searches
XZSGK43W45SF - XZSGK43W45SF XZSGK43W45SF Datasheet
QB-100GF-TC-01S - QB-100GF-TC-01S QB-100GF-TC-01S Datasheet
MUR860 - MUR860 MUR860 Datasheet
LSL-063-03G - LSL-063-03G LSL-063-03G Datasheet
HI5805 - HI5805 HI5805 Datasheet
FN3984 - FN3984 FN3984 Datasheet
GP1S21 - GP1S21 GP1S21 Datasheet
GP1S22 - GP1S22 GP1S22 Datasheet
CY62128V - CY62128V CY62128V Datasheet
CPT-18-6018 - CPT-18-6018 CPT-18-6018 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
