HS60VGA K6484L-FF (STN) 8.4" (21.3 Color Graphic Module General D
|
|
|
Top Searches for this datasheet
6.0" (15.cm) Color Graphic Module Preliminary Preliminary
HS60VGA K6484L-FF (STN)
8.4" (21.3 Color Graphic Module General Description K6484L-FF BabyVGAis 8,4" color display module. ordered with without backlight power supply. K-series range passive color displays feature dual scan display addressing which doubles refresh rate single scan panels. K6484L pixel format full (RGB) individually addressable graphic matrix. K6484L display, "Slim-Tab" technology connects control lines display most compact efficient manner. Features Dual scanning effectively doubles usal refresh rate pasive color displays high contrast image giving high color depth Clearer, brighter colors with excellent picture definition Fast response time more color shades Ultra Thin Lightweight Applications Portable Instruments Ultra compact-size Industrial Controls Lan/Cable Testers Handy Terminals
K6484L-FF BabyVGA
Made Citizen Watch Co., Ltd. Tokyo, Japan
Page
7.14 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Specificationc Application This specification shall applied Matrix Module K6484L-FF. Composition Display type structure Driving method Backlight Surface texture Color display (RGB) graphic display 1/240 duty multiplex drive Cold cathod fluoresent tube (CCFT) Non-Glare
Segment
Segment
Segment
Segment
Segment
Segment
Common
Common
(640 3(RGB) dots
VFL.
Common
Segment
Segment
Segment
Segment
Segment
Segment
Input Buffer
LOAD FRAME
Block Diagram (K6484L-FF does incorporate controller) VCON
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Mechanical Specifications Dimentions weights Module size Effective viewing area Weight dimentional drawing
0.243 128.136 (480 dots)
152.4 Typ. Approx.
0.024
0.065 0.024 170.856 (1920 dots)
Input connector Manufacturer Hirose Parts number DF9B-31P-1V Compatible connector: DF9-31S-1V Backlight connector Manufacturer Parts number BHR-03VS-1 Compatible connector: SM02(8.0)B-BHS Absolute maximum ratings Electrical absolute maximum ratings
Item Supply voltage logic circuit Supply voltage driving Input voltage Symbol VCON Min. -0.3 -0.3 Max. +6.0 +3.0 VDD+0.3 Unit Note Remarks
Note Shall applied FRAME, LOAD, UD0~UD7, LD0~LD7.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Environmental absolute maximum ratings
Item Specification Max. +60°C Min. -20°C Remarks Note condensation Note1 condensation 15~55Hz directions
Storage temperature Operating temperature
Max. +45°C Min.
Frequency
Vibration
Acceleration 1.5G Sweep octave/min. directions
Shock
Acceletation Acting time 11msec.
(Note +40°C .85% Max. +40°C .Absolute humidity must lower than humidity +40°C
Electrical specifications Electrical characteristics
Item Supply Voltage Logic Circuit Supply voltage driving Frame Frequency Input Voltage level level Symbol VDD-VSS VCON-VSS fFRAME Current Consumption -VSS 5.0V± 5.0V VCON 1.6V FRAME 120H 3.3V VCON 1.6V FRAME 120H Test Condition 3.15 5.25 0.2VDD 1206 Unit
(VSS =0V)
Remarks
0.8VDD
(Note)
(Note) Shall applied FRAME, LOAD, ~UD7,
Supply voltage driving (VCON-VSS) contrast liquid crystal display depends viewing angle, ambient temperature, operating voltage, etc. Adjust contrast varying VCON necessary. .1.3 Vtyp 25°C .1.6 Vtyp 40°C .1.8 Vtyp FRAME 120Hz
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
VCON adjusting circuit
K6484L-FF
Interface specifications Terminal assignment
Symbol FRAME LOAD VCON DISP Function Display data lower screen (Fig 6-1) Display data lower screen (Fig 6-1) Scanning data (Start signal each display cycle) Display data lower screen (Fig 6-1) Clock pulse scanning data shift Latch pulse output display data Display data lower screen (Fig 6-1) Clock pulse input display data Display data lower screen (Fig 6-1) (variable power supply drive circuit) Display data lower screen (Fig 6-1) +5.0V (Supply voltage driving) +5.0V (Supply voltage driving) Display data lower screen (Fig 6-1) level becomes non-visual level becomes normal operation Display data lower screen (Fig 6-1) connection
Display data upper screen (Fig 6-1)
Display data upper screen (Fig 6-1) Display data upper screen (Fig 6-1)
Others lead wires backlight VFL, VG(GND)
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Relationships DATA input signal screen division
D3G,D6R,D8B, D3R,D5B,D8G, D2B,D5G,D8R, D2G,D5R,D7B, D2R,D4B,D8G, D1B,D4G,D7R, D1G,D4R,D6B, D1R,D3B,D6G, D640B D640G D640R D639B D639G D639R D638B D638G
#240
D3G,D6R,D8B, D3R,D5B,D8G, D2B,D5G,D8R, D2G,D5R,D7B, D2R,D4B,D8G, D1B,D4G,D7R, D1G,D4R,D6B, D1R,D3B,D6G, D640B D640G D640R D639B D639G D639R D638B D638G
D639B D640R D640G D640B
#240
640x 3(RGB)
Page6
2.98 Version
Page
Timing chart
#240 #240 #240 #239 #240 #239 #240 Line D638G D638B D639R D639G D639B D640R D640G D640B
Frame
Load
Line
8.4" (21.3 Color Graphic Module
Line Data Latch
Load
(LD7)
(LD6)
Preliminary
(LD5)
(LD4)
(LD3)
(LD2)
(LD1)
(LD0)
K6484L-FF (STN)
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Switching characteristics
VDD-VSS=3.15V~4.75V
Item Clock Cycle Time Pulse Width Load Pulse Width Load Load Data Setup Time UD7-UD0, LD7-LD0 Data Hold Time UD7-UD0, LD7-LD0 Frame Setup Time Frame Load Frame Hold Time Load Frame Rise/Fall Time Load Rise/Fall Time Symbol tw(CH) tw(CL) tw(LH) tw(LL) tOSU tDHD tSU(FR) tHD(FR) tR(CP) tF(CP) tR(L) tF(L) Unit
(Note) Load signal should inputted same interval. signal should inputted times more between LOAD signal. VDD-VSS
Item Clock Cycle Time Pulse Width Load Pulse Width Load Load Data Setup Time UD7-UD0, LD7-LD0 Data Hold Time UD7-UD0, LD7-LD0 Frame Setup Time Frame Load Frame Hold Time Load Frame Rise/Fall Time Load Rise/Fall Time Symbol tw(CH) tw(CL) tw(LH) tw(LL) tOSU tDHD tSU(FR) tHD(FR) tR(CP) tF(CP) tR(L) tF(L) Unit
(Note) Load signal should inputted same interval. signal should inputted times more between LOAD signal.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Switching Timing Chart
tF(CP) tw(CH) tOSU D1-D0 tDHD tw(CL) tR(CP) tw(CH)
LOAD tR(L) tw(LH) tF(L)
(FR) FRAME tsu(FR)
tw(LH) tw(LL) tw(LL)
LOAD
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Optical characteristics Optical characteristics (Refer Note Note
Preliminary
K6484L-FF (STN)
Item Turn Time Turn Time Contrast Ratio Visual Angle Range Viewing Direction
Symbol tOFF
Unit
Condition
deg. deg. 12:00
(Note Optical characteristics measurement system backlight Optical detector
(Note Definition response time
Non-selected state 100%
Selected state
Non-selected state
Brightness
tOFF
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
(Note Definition
(Visual angle direction)
(6:00 direction)
(Note Definition contrast ratio
Selected state Non-selected state
Brightness
Operating voltage driving
Brightness selected state (Bs) Brightness non-selected state (Bns)
(Note Definition visual field enlarging direction 12:00
9:00
8888
3:00
Page
6:00
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Optical characteristics color chart
Item Green Blue White Symbol Typ. 0.53 0.34 0.32 0.54 0.17 0.16 0.33 0.39 Max. Test condition
Backlight specifications Electrical characteristics
Item Lamp current Lamp voltage Frequency Starting discharge voltage Condition Min. Typ. Max. Unit mArms
Electrical characteristics
Item Brightness Condition Frequency 40kHz, wave Lamp current brightness Min. Typ. Max. Unit
Rise time Minutes ±20% Brightness uniformity Windless condition room temperature, average value points below. (Max. Min. brightness Ave. brightness) Ave. brightness. Measured points below with fittest contrast condition whole screen white.
Screen
Measuring point
Life time
Item Continuous driving cycle Condition Lamp current Lamp current Min. 10,000 100,000 Typ. Unit hrs. Cycles
definition life time period until brightness becomes 1/2. cycle 30sec. 30sec. OFF.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Precautions Precautions Before using module, peel protective plastic sheet, otherwise displayed picture will fuzzy cloudy. Before applying supply voltage video signal, make sure power supply video signal connected correctly. Improper connections damage unit. touch semi-fix resistor mounted which preadjusted factory optimum display result, readjustment will need special instrument. this module high humidity environment, otherwise unit damaged. Precautions handling Take great care handle LCD, since surface covered layer plastic, called polarizer which very easy scratched. careful touch polarizer with bare hand. Clean only with absorbent cotton swab soft cloth wiping gently with petroleum benzine. such chemicals acetone, ethanol, toluene, isopropyl alcohol cleaning, otherwise polarizer deteriorated. Also, saliva water droplets should removed right away become deformed discolored left polarizer surface long time. panel been broken liquid crystal substance leaked out, avoid inhaling touching liquid crystal contacted skin clothes, wash immediately. Installation circuit substrate with mounted static sensitive element Handle substrate with utmost care. bend twist unit, panel circuit board crack. protect panel, especially polarizer surface, transparent protective board example, acrylic glass board) product case. Storage Avoid high humidity temperature. expose unit direct sunlight. Take precautions avoid unnecessary pressure unit. Operational precautions would break down drive voltage exceeds limit. Make sure electrical
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
specifications, particularly supply voltage. Moreover, input connector module joined/disjoined with power module kept internal circuit module might break down. sure join/disjoin input connector with power turned OFF. response display slow when ambient temperature below lower limit, display becomes unusual when ambient temperature above upper limit. case, does mean failure. operates properly normal operating temperature range. contrast liquid crystal display varies with viewing angle, ambient temperature, drive voltage. Adjust drive voltage best contrast installing external variable switch. move module from cold storage into room during test, moisture would condense module might fail. prevent latch-up voltage panel, power following timing (Fig 9-1).
FRAME LOAD DATA DISP-OFF Min. msec. Min. Frame time Min. msec.
Even when module worked normally, sure check noise level each signal within specification level less than 0.2VDD level more than 0.8VDD). noise level beyond that specified figure, there possibility occur operational error statistically. Moreover, sure measure noise level with module kept connected.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
module, CMOS been used input terminals incorporate pull-up pull-down function. avoid keep input terminals open state during power condition. Application voltage liquid crystal results debasement characteristics. Though original characteristics recovered long application time short, e.g., second maximum, long time application would bring permanent deterioration characteristics. control signal, especially LOAD signal applied correctly condition where liquid crystal driving voltage VAA, being applied liquid crystal, voltage applied liquid crystal. suggested before prevent such application voltage studying "Manual use". metal frame connected electrically. After module been built your equipment, don't fail connect metal frame GND. Otherwise, internal prone latch could break down. lighting module condition where built equipment, sure connect metal frame thereafter, turn power Others Don't disassemble dismantle module. module which ever been disassembled dismantled user's side, WARRANTY provided CITIZEN won't applied. such case where same display pattern left long time, there slight residual image coming This residual image should disappear when other display pattern given turn power left module while. There problem reliability. When grey scale displayed, poor-looking displayed, e.g., crosstalk flicker come according type controller outputting grey scale signal. displaying grey scale, check beforehand poor-looking display comes every grey scales.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Reliability evaluation standard Matrix Module 10-1 Scope This reliability evaluation standard applies Matrix module K6484L-FF. 10-2 Reliability test items criteria[
Test items Operation high temperature Operation temperature Test conditions 2°C, Operation with standard voltage 2°C, Operation with standard voltage (non-condensing) 2°C, 2°C, (non-condensing) 2°C, (non-condensing) 2°C, min. Temperature cycling 2°C, min. 2°C, min. 2°C, min. Vibration frequency Acceleration Sweep directions. octave/min. min/cycle each direction cycle time each directions cycle cycle non-condensing Time Criteria noticeable change operating performance
Leaving high temperature Leaving temperature Leaving high temperature
Vibration
Shock
Gravity drop onto lauan board thick from height packaged condition) directions. Acceleration Acting times directions msec
Shock
test measurement shall made ambient temperature number samples shall
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Inspection standard Matrix Module 11-1 Scope this inspection standard applies matrix module K6484L-FF. 11-2 Delivery inspection Inspection conditions inspection conditions shall accordance with conditions this spec. sheet. Also environmental conditions, inspection shall made ordinary temperature 25°C) ordinary humidity appearance shall inspected visually distance more than between product eyes besides from vertical direction display unit under illumination fluorescent lamp 20W. However, excluded when there provision Defects shall inspected maximum contrast. Inspection shall comprise quantity products delivered time. Inspection method sampling inspection shall made according following provisions judge acceptability. Applicable standard 105D Normal time sampling method Level Major defect 1.0% Minor defect 2.5% evaluated overall items. Major defect Defect miss proper function Minor defect Defect does miss proper function depreciates value products. Definition applicable zone Zone Zone Zone Display area Zone Viewing area exclude Zone Zone Outside viewing area
Zone
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
11-3 Inspection standard 11-3-1 Visual defects classification
Section defects Major defect Inspection item Defect miss specified display function specified dots E.g. disconnection, short circuit, etc.) Malfunction Electrical characteristics Current consumption Minor defect 0utward appearance Dimension Display part appearance when turn Pinholes, chipping, white spot, black spot, thick dot., thin dot, deformation, center line, uneven display, etc. Display part appearance when turn Scope having effect function Bubbles, flaws, stains, foreign article Outward appearance excluding display part Scope having effect function Flaws, stains, solder, identification marking, assembly deformation metallic frame. 1.0%
2.5%
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
11-3-2 Visual inspection standard display unit
Classification
Inspection items Display
Criteria Defect miss specified display function Turn area different from specified area Backlight doesn't light defect that size which seen does very even though voltage applied display element changed. Circular spot foreign matters Zone Size (mm) Allowable q'ty Zone Zone Ignore Ignore
Section defects Major defect Major defect Major defect Minor defect
special shape shall estimated with (Longer side Shorter side number defects must within pcs. Display part appearance when turn Quantity defects having diameter zone Within Linear spot foreign article Zone Thickness Allowed q'ty (mm) Length Zone Zone (mm) W<0.025 Ignore Ignore L<1.0 W<o.1 Ignore Ignore 1.0L10.0 0.025W 0.05 1.0L5.0 0.05W0.1 accordance with inspection item number defects must within pcs. Minor defect
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Classification
Inspection items White spot Black spot spot Blue spot Green spot
Criteria defect that size which seen varies according change voltage applied display element. Size part seen clearly part which size counted defect. part seen clearly vicinity thick spot part which size counted defect. part seen unclearly accompanied thick spot must judged number defects must within pcs. defect that line condition varies according change voltage applied display element. Defect mustn't conspicuous display front most suitable contrast voltage. Less than dots width
Section defects Minor defect
Display part appearance when turn
White line Black line
Minor defect
Thick dot, Thin dot, deformation Center line
Minor defect
more than *-marked objects denote overlapping dislocation liquid crystal cells. conspicuous unevenness conspicuous unevenness accordance with lighting appearance inspection item (2).
Minor defect
Uneven display Uneven color (10) White spot Black spot Display part appearance when turn
Minor defect Minor defect Minor defect
(11) White line Black accordance with lighting appearance inspection line item (3).
Minor defect
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
11-3-2 Visual inspection standard display unit
Classification
Inspection items (12) Bubbles (Originate polarizer)
Criteria
Section defects
Zone Size (mm)
Allowable q'ty Zone Zone Ignore Ignore
Minor defect
special shape shall estimated with (Longer side Shorter side number defects must within pcs. (13) Scratches stains (Originate polarizer) Don't miss proper function don't depreciates value product much. object shall within viewing area scratch shall accepted which thin light identified unless otherwise observed from other directions than vertical when checked visually. Stains shall accepted which wiped conspicuous unevenness Minor defect
Display part appearance when turn
(14) Interference fringes (15) Total number defects (16) Separation between defects (17) Assembly
Minor defect
total number allowable defects must within pieces. Adjoining defects must separated more than from each other Proper assembly liquid crystal display element holder Proper assembly each component part
Minor defect
Minor defect
Minor defect
(18) Dimension Electric characteristics (19) Current consumption
Within specified limit Within specified limit
Minor defect Minor defect
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
11-4 marking Form Indication side case
CITIZEN
LIQUID CRYSTAL DISPLAY
Model
Designation product (Model)
Q'ty
MADE JAPAN
Mfg.
Composition mfg.
Mark plant Mark week week week
Mark month
11-Nov Mark year 1996 1997 1998
When special identification required product, marking shall determined through discussion between personnel charge. 11-5 Warranty Each product shall warranted year after delivery. Should product prove defective reason material workmanship side obviously, will replaced charge delivered again after eliminating defective part repairing correcting.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
Manual 12-1 Protection voltage from being applied module. voltage applied panel, brings about unfavorable effects, e.g., change worse condition characteristics liquid crystal substance, abnormal display part panel etc. When module used some system, there possibility voltage being applied panel time periods shown Fig. 12-1 below shown Fig. 12-5 later. time from turning power drive circuit module starts normal operation. Fig. 12-2 succeeding page.) time from reset been applied system drive circuit module starts normal operation, case where reset applied system control signal module longer make normal operation temporarily, Fig. 12-3 later.) time from power been turned liquid crystal driving voltage returns level. Fig. 12-4 later.) time which controller controlling +20msec. (See Fig. 12-5 later.)
POPWER SYSTEM RESET POWER
RESET SIG.
MODULE CONTROL SIG. (CP, LOAD, FRAME) 20ms 20ms
DISP-OFF level
Fig. 12-1
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
case POWER generally, standard controller requires initialization before initialization comes end, normal control signal given out. module starts normal operation about 20ms after condition been where control signals (CP, LOAD, FRAME normally. Therefore, there possibility voltage being applied panel period shown Fig. 12-2 below. POWER
Controller setting complete MODULE STARTS NORMAL OPERATION
MODULE CONTROL SIG> (CP< LOAD< FRAME
Normal condition 20ms High level
DISP-OFF DISPLAY level NORMAL DISPLAY
Fig. 12-2
METHODS Keep DISP-OFF terminal level during above, voltage applied panel.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
case POWER (Vss When DISP-OFF return level behind after main power been turned since drive circuit module stopping logic operation point time power OFF, might result voltage being applied panel period shown Fig. 12-4. below. POWER
MODULE CONTROL SIG. (CP,LOAD, FRAME
Normal condition level
Min. 10ms DISP-OFF
Fig. 12-4 METHOD best possible DISP-OFF level before electric potential terminal drops level with drop. Note already been verified experimentally that damage voltage applied panel quite lesser case power than that case power However, such case where voltage been applied when power turned OFF, power turned again short time thereafter, effect brought about. therefore necessary take care about Other case case where controller been used which works control both LCD. There instance that normal control signal sent while controller working control CRT. such instance, display panel goes order voltage might applied panel. shown Fig. 12-5 below That From Controller starts control 20ms after controller begun control signal again.
DISPLAY MODULE CONTROL SIG. (CP, LOAD, FRAME) DISP-OFF
CONTROL SIGNAL
DISPLAY
CONTROL SIGNAL
DISPLAY
CONTROL SIGNAL 20ms
High level
level Methods keep DISP-OFF terminal level during above, panel longer gives display while voltage applied panel.
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
12-2 Application voltage module during system development. (Vss long-time application voltage panel brings about abnormal display part panel change worse condition characteristics liquid crystal case far, there have been many examples that only module wherein abnormal display occurred left couple days without applying voltage, recovers from abnormality. however necessary take care since module damaged seriously that longer recovered depending applied voltage value time. also requested panel damaged application voltage evaluation display quality since change worse condition display quality often found. should noted that voltage left applied panel following condition Where (LCD) controller working normally condition that DISP-OFF terminal level high. Where (LCD) controller controlling condition that DISP-OFF terminal level high. Method order avoid application voltage over long time, either following methods when there need take look panel Keep DISP-OFF terminal connected shown Fig. 12-6.
MAIN BOARD
MODULE DISP-OFF
Fig. 12-6
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
12-3 Reason solution abnormal operation module Situation whole display flickers heavily, unlike mere, ordinary flickering. Reason cause trouble Noise getting mixed control signal module, especially LOAD signal this noise level excess specified limit. Specified limits 0.2VDD above reason, module operating abnormally. NOTE) specified limits have been fixed accordance with specification Generally, since specification provided with fair allowance, does always operate abnormally even noise level exceeds specified limit. (Often, there found instance that only born with little allowance variations manufacture operates abnormally.) However, case where level beyond specified limit, unsafe since there possibility getting into abnormal operation zone owing change power supply voltage, change noise condition, change temperature Therefore, even only module among lots samples operates abnormally, necessary check level over, take proper action beforehand. Noise generated following reasons cable connected between control signal generator module long. device using module noisy. Checking method noise Connect oscilloscope between LOAD connector module measure peak value noise. oscilloscope connected other point, correct measurement won't accomplished.) (Sometimes, when oscilloscope connected, voltage change becomes smaller according capacity oscilloscope result, abnormal operation might longer come about.)
LOAD Sig. Max. Level
Fig. 12-7
Page
2.98 Version
8.4" (21.3 Color Graphic Module
Preliminary
K6484L-FF (STN)
solution shorter cable short possible. Connect metal frame module impedance way. Insulate metal frame noisy device from metal frame module. Insert noise filter between heavy load power supply module. Shield cable. 12-4 Function DISP-OFF terminal soon L-level voltage applied DISP-OFF terminal, data display out. screen change black DISP-OFF terminal provide following functions: Erasing display data display case that displayed data have been L-level. While L-level voltage left applied DISP-OFF terminal, nothing remains displayed regardless displayed data. Preventing voltage applied panel While L-level voltage remains applied DISP-OFF, voltage applied panel zero. detail, refer following items Manual 12-1 Protection voltage from being applied module 12-2 Application voltage module during system development
Page
2.98 Version
95050U.S.A.Tel:
(408)-987-7735Please
call
Shoreline
Electronics,
Inc.2098-B
Walsh
(408)-987-7733Fax:
Clara,
408-987-7733
nearest
Representive
Ave.Santa
priornotice.
without
time
sheet
data
preliminary
this
detailed
specification
circuitry
changes
make
right
Distributor
reserves
Inc.
Electronics,
Shoreline
area.
your
152.4 134.2 (METAL FRAME) 131.0 (VIEWING AREA) 128.136 (DISPLAY AREA) 146.4±0.2 29.7 15.0 2.5±0.2
Dimensional Drawing
Page
24.5 22.0 1.572
8.4" (21.3 Color Graphic Module
203.5±0.3 170.856 (DISPLAY AREA)
216.0
179.0 (METAL FRAME)
174.0 (VIEWING AREA)
Preliminary
12.5 3239 AWG#24 (3KV) NISSEI CONNECTOR BHR-03VS-1 (JST)
K6484L-FF (STN)
2.98 Version
Other recent searches
MMA7341LC - MMA7341LC MMA7341LC Datasheet
MHPM7B16A120B - MHPM7B16A120B MHPM7B16A120B Datasheet
Meg750Meg - Meg750Meg Meg750Meg Datasheet
HT47R20 - HT47R20 HT47R20 Datasheet
HAT2071R - HAT2071R HAT2071R Datasheet
GBU804 - GBU804 GBU804 Datasheet
GBU810 - GBU810 GBU810 Datasheet
FFB2907A - FFB2907A FFB2907A Datasheet
FMB2907A - FMB2907A FMB2907A Datasheet
E250N50X4 - E250N50X4 E250N50X4 Datasheet
2SC5476 - 2SC5476 2SC5476 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
