Inlets outlets Mount with without flange shield "Piggy-
|
|
|
Top Searches for this datasheet
Selector Chart Inlets, Outlets, Plugs Cordsets
Inlets outlets
Mount with without flange
shield
"Piggy-back" fuse clips, snap panel, mount
Outlets available ganged groups
Series Page number inlet outlet Snap-in mounting (panel) Screw mounting (panel) mounting
GSP1 GSP2 page 9-10
6100 6600 4300 page
GRF2 page12
GSF1 GSF2 page 13/14
0909 page
"split-panel" mounting
"split-panel" mounting
Inlets outlets
Mount
"hot" connections
High current
current
NEMA
Series Page number inlet outlet Snap-in mounting (panel) Screw mounting (panel) mounting
4300 page
6110 6120 page
6153 6653 page
4300 page
4300 page
"split-panel" mounting
Plugs cordsets
High current
High current
Series Page number inlets cable connection outlets cable connection cable entry Straight cable entry International cordsets
4300 page
4300 page
4300 page 24-26
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
GSP1 Inlet Screw-on Mounting
Robust pins easy mounting Schurter recommends improved, robust version existing applications designs. former version will still available, will longer shown catalog.
Order Numbers:
Standards: EN60320;
Former version GSP1.1xxx.x GSP1.2xxx.x GSP1.3xxx.x GSP1.4xxx.x
Improved version GSP1.6xxx.x GSP1.7xxx.x GSP1.8xxx.x GSP1.9xxx.x
49.6 21.9 ±0.1 ±0.15 29.9 ±0.1
without insulation cover
24.3
with insulation cover
25.5
±0.05
spacings
delete protection class
±0.1
Ground terminals
±0.05 ±0.05
±0.1
pos.
+0.1
9.05 9.05 ±0.1
±0.05
15.85 ±0.1
+0.1
+0.1
±0.15
Color Housing Black Grey Ground Terminal Protection class without ground Protection class ground terminal solder quick connect 4.8x0.8mm, conn. axis Same ground terminal connected with Protection class ground terminal solder quick connect 4.8x0.8mm connector axis Same ground terminal connected Protection class ground terminal solder/ quick-connect 6.3x0.8mm, conn. axis Same ground terminal connected Protection class ground terminal solder/ quick-connect 6.3x0.8mm connector axis Same ground terminal connected Insulation Cover Without insulation cover Black insulation cover, mounted Black insulation cover included (separate) Mounting Flange Holes cylindric screws With pre-inserted nuts side with pre-inserted nut, front side with holes screws side with holes screws, front side with pre-inserted nuts With holes self-tapping screws included) With holes self-tapping screws included) Mount with self-tapping screws (not incl.) Terminal Spacing 9.05 9.05 Basic Specification Right-angle inlet mounting
standard configuration. Contact Schurter, Inc. non-standard configuration order minimums. additional insulation cover (spare part only), order number 0853.0804 notes above regarding part number change improved, robust pins
27.8
±0.5
15.85 ±0.1
±0.15 9.05 9.05
+0.2
pos.
±0.1
max. ±0.15 ±0.05 ±0.05 ±0.15
mounting cut-out
±0.1
±0.15
"cold" connections 70°C, Protection Class Right-angle mount with flange screws self-tapping screws pre-inserted nuts screws Ground terminal solder quick-connect 0.8mm 0.8mm Ground terminal positioned access from back connector Optional insulation cover protection against electrical contact Material: temperature resistant thermoplastic 94V-O Terminals: brass, nickel-plated SEMKO recognition certification approval approval approval 15A/250V File #E96454 15A/250V File #LR38456 10A/250V File #73753 File 10A/250V numbers 10A/250V request
22.5
30.3
31.45 (4.8 0.8) 32.45 (6.3 0.8) 14.25 (4.8 0.8) 15.25 (6.3 0.8)
Ordering example: 2315
Black housing Protection class solder/quick-connect ground terminal 6.3x0.8mm, connector axis Black insulation cover, mounted side mounting flange pre-inserted nut, front side holes screws 9.05 terminal spacing Right-angle appliance connector mounting
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
GSP2 Inlets Snap-in Screw-on Mounting
Order Numbers:
Panel Mounting 1.0mm panel thickness 1.2mm panel thickness 1.5mm panel thickness 2.0mm panel thickness 2.5mm panel thickness 3.0mm panel thickness
Robust pins easy mounting Schurter recommends improved, robust version existing applications designs. former version will still available, will longer shown catalog. Standards: EN60320;
Snap-in
Screw-on
Color Housing black grey Ground Terminal protection class without ground terminal protection class solder/quick connect 0.8mm, connector axis same connected with protection class solder/quick connect terminal 0.8mm, connector axis same connected with protection class solder/quick connect terminal 0.8mm, connector axis same connected with protection class solder/quick connect terminal 0.8mm, connector axis same connected with protection class solder terminals, terminals protection class quick connect terminals 0.8mm, terminals protection class solder terminals, connector axis same connected with protection class solder terminals, connector axis same connected with protection class solder terminals, terminal protection class solder/quick connect terminal 0.8mm, terminal Insulation Cover without insulation cover black insulation cover, mounted black insulation cover included (separate) Printed Circuit Board Mounting
with self-tapping screws (screws included) with self-tapping screws screws included) with snap-in feet 1.6mm with snap-in feet with snap-in feet 1.2mm with snap-in feet 1.5mm with snap-in feet with snap-in feet 2.4mm with snap-in feet 3.2mm with snap-in feet 1.6mm, with locking pins 0098.0092, added secure inlet
Former version GSP2.1xxx.x GSP2.2xxx.x GSP2.3xxx.x GSP2.4xxx.x
Improved version GSP2.6xxx.x GSP2.7xxx.x GSP2.8xxx.x GSP2.9xxx.x
Snap-in
Screw-on
with insulation cover
±0.05 Snap-in Screw-on rear panel mounting split panel mounting
"cold" connections 70°C, Protection Class mount with snap-in screw-on feet (self-tapping screws provided) panel mount from rear "sandwich" between bottom panels optimum stability (see page further information) Ground terminal solder quick-connect 0.8mm 0.8mm; positioned access from back connector Optional insulation cover protection against electrical contact Material: thermoplastic, polyamid 94V-O) Terminals: brass, nickel-plated SEMKO recognition certification approval approval approval 15A/250V File #E96454 15A/250V File #LR38456 10A/250V File #73753 File 10A/250V numbers 10A/250V request
Terminal Spacing terminals type spacings 7/9.7mm type spacings 9.05/7.3mm type spacings 9.05/9.7mm type spacings 7/7.3mm Basic Specification GSP2* appliance connector mounting
*Standard configuration. Contact Schurter non-standard order minimums. additional insulation cover (spare part only), order number 0098.0077 notes above regarding part number change improved, robust pins
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
6100 6102 4300 Inlets Panel Mounting
"cold" connections Protection Class Screw mount from front rear, snap-in mount from front 6100, 6102: solder terminals .138 .032" (3.5 0.8mm) quickconnect terminals .187 .032" (4.8 0.8mm), .250 .032" (6.3 0.8mm) 0.8mm (6100 snap-in only) 4300.0704: combination solder/quick-connect terminals .187 .032" (4.8 0.8mm) torque required screws screw-on type inlet with filter 5100, page insulation cover cord retaining clamp, page 6100, 6102: Material: thermoplastic, (6102: 94V-0) Prongs Terminals: brass, tin-plated 6100 File #E96454 File #LR38456
File #77561/3479, expert report
File numbers request
6100 6102
6100 6102
recognition certification approval
15A/250V 15A/250V 10A/250V 10A/250V 10A/250V
6102 File #E96454 File #LR38456
File #3173, expert report
File numbers request
4300
SEMKO approval approval
4300: Material: thermoplastic Prongs Terminals: brass, nickel-plated SEMKO recognition certification approval approval approval 15A/250V 15A/250V 10A/250V 10A/250V 10A/250V File #E132270 File #073690 File #63816
File numbers request
Standards: 60320; 320/C14 (6100, 4100); 320/C18 (6102)
6100/6102 Snap-in
6100/6102 Screw-on
4300 Snap-in
6102 snap-in flanges sides
Panel thickness: 0.8-1.2mm: 20.3 +0.1 1.3-2.0mm: 20.5 +0.1
solder terminals 22.5mm quick-connect 25.5mm panel thickness 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm
solder terminals 20.5mm quick-connect 23.5mm
6100/6102 Snap-in Class Class 6100.41XX (6100-41/.) 6100.42XX (6100-42/.) 6100.43XX (6100-43/.) 6102.51XX* (6102-51/.) 6102.52XX* (6102-52/.) 6102.53XX* (6102-53/.)
6100/6102 Screw-on Class Class 6100.3100 (6100-31) 6100.3200 (6100-32) 6100.3300 (6100-33) 6102.3100* (6102-31) 6102.3200* (6102-32) 6102.3300* (6102-33)
Order Numbers (type) Terminal Type solder .138 .032" (3.5 0.8mm) quick-connect .187 .032" (4.8 0.8mm) quick-connect .250 .032" (6.3 0.8mm)
4300 Snap-in Class 4300.0704 (0711)
Terminal Type solder/quick-connect .187 .032" (4.8 0.8mm)
panel thickness 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm (e.g. 6100.4110 1.0mm) order rivet mount type, change fifth digit part number from (e.g. 6100.9100, 6102.9100). *Contact Schurter order minimum
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
GRF2 Inlet With Shield Panel Mounting
Ground terminal
cold connections Protection Class Metal shield safeguards equipment against radiated (electromagnetic interference). Flexible steel claws make multiple contact points panel ensure shield integrity. snap-in design rear panel mounting allows terminals pre-wired before mounting (see diagrams below) Solder/quick-connect terminals .187 .032" (4.8 0.8mm) shielded inlet with line filter GRF4, page SEMKO recognition certification approval approval approval 15A/250V File #E96454 15A/250V File #LR38456 10A/250V File #100875 File 10A/250V numbers 10A/250V request
shield
Standards: 1283; C22.2/8; 320/C14; 60320; EN133200
Effect Shield Attenuation
Data representative only. Specific measurements vary differences form, fit, function various filter types available market.
Shielding Effectiveness (dB)
Electric Field Conventional Inlet
Panel cut-out
Frequency (MHz)
1000
Mounting Instructions
1.Slide slot over panel
2.Press
3.Push forward
4.Snap into place
Order Numbers GRF2 (without filter)
Ground through metal shield terminals GRF2.0312.11 GRF2.0315.11 GRF2.0320.11 Ground through metal shield only GRF2.0212.11 GRF2.0215.11 GRF2.0220.11 Panel thickness Terminals solder/quick-connect 0.8mm
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
GSF1 Inlet With Without "Piggy-back" Fuse Clips Mounting
Order Numbers: GSF1.
Snap-in Screw-on
Standards: 320/C14; 127-6. patent pend.
Color Housing Black Grey Mounting panel Mounting from behind, panel fixation Bezel mounting, panel thickness, Bezel mounting, panel thickness, Bezel mounting, panel thickness, Bezel mounting, panel thickness, Bezel mounting, panel thickness, Bezel mounting, panel thickness, Bezel mounting, panel thickness, Ground terminal Protection Class without ground terminal (snapin mounting only) Protection class ground terminal PCB, solder/quick-connect 4.8x0.8 conn. axis Protection class ground terminal PCB, solder/quick-connect 4.8x0.8 conn. axis Protection class ground terminal PCB,and solder/quick-connect 6.3x0.8 connector axis Protection class ground terminal PCB, solder/quick-connect 6.3x0.8 conn. axis Protection class ground terminal PCB, solder connector axis Protection class ground terminal PCB, solder connector axis Insulation cover Without insulation cover Black insulation cover included (separate**) Black insulation cover, mounted (for GSF1 without fuse clips only)** Mounting printed circuit board
With holes self-tapping screws included) With holes self-tapping screws (not included) Snap-in mounting thickness (other panel thickness available request) Snap-in mounting thickness with locking pins 0098.0092, added secure inlet
Ground terminals
pos.
spacings without fuse clips with insulation cover, mounted
pos.
25.1 (4.8 0.8mm quick-connect) 26.1 (6.3 0.8mm quick-connect) 22.1 (solder only) 26.5 (4.8 0.8mm quick-connect) 27.5 (6.3 0.8mm quick-connect) 24.5 (solder only) Panel cut-out rear mounting
1-pole fusing
Panel cut-out "sandwich" mounting 2-pole fusing
snap-in 6±0.05 screw-on 3.6±0.1
inlet with 1-pole 2-pole fuseclips acc. 320/C14, 127-6 "cold" connections Protection Class mount with snap-in screw-on feet (self-tapping screws provided) Panel mount from rear "sandwich" between bottom panels optimum stability (see page further information) Fuse replacement requires opening equipment (optional insulation cover available protection against electric shock) Ground terminal solder, solder/quick-connect 0.8mm 0.8mm; positioned access from back connector Material: temperature resistant thermoplatic PBTB (UL94V-O). Terminals: brass, tin-plated Max. power dissipation 3.15 watts (1-pole) watts (2-pole) according 127-6
with fuse clips without fuse clips
Fusing Without fuse clips With fuse clip 20mm fuse, 1-pole With fuse clips 20mm fuses, 2-pole Basic specification GSF1 inlet mounting, with without fuse clips
Standard configuration. Contact Schurter non-standard configuration order minimums. additional insulation cover (spare part only), order number 098.0078
Ordering example: GSF1.2211.41
Black housing Panel thickness 2.0mm
SEMKO
recognition certification approval approval approval
10A/250V 10A/250V 10A/250V 10A/250V 10A/250V
16A/250V 16A/250V 10A/250V 10A/250V 10A/250V
File #E93617/E96454 File #LR38456 File #86959
File numbers request
Ground terminal solder/quick-connect 0.8mm Insulation cover included (separate) Snap-in mount, 1.6mm thickness 2-pole fusing, with fuse clips 20mm fuses inlet mounting
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
GSF2 Inlet With "Piggy-back" Fuse Clips Panel Mounting
Snap-in
Standards: 320/C14; 127-6. patent pend.
Front view
Line neutral terminals solder/quickconnect 0.8mm, connector axis (GSF2.XX1X.XX)
Order Numbers: GSF2.
Color Housing Black Mounting panel Snap-in mounting from front, panel thickness 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm Ground terminal Protection Class without ground terminal Protection class solder/quick-connect connector axis Protection class solder/quick-connect connector axis Protection class solder/quick-connect connector axis Protection class solder/quick-connect connector axis Line Neutral terminals Solder/quick-connect connector axis Solder/quick-connect connector axis
view
Ground terminal solder/quick-connect 0.8mm, connector axis (GSF2.XXX1.XX)
Side view
Ground terminal solder/quick-connect 0.8mm, connector axis (GSF2.XXX3.XX)
33±0.1
33±0.1
25.4
25.4
Panel cut-out
Drilled cut-out
Fusing With fuse clip 20mm fuse, 1-pole (without fuse**) With fuse clips 20mm fuses, 2-pole (without fuses**) Basic specification GSF2* inlet panel mounting, with fuse clips
inlet with 1-pole 2-pole fuseclips acc. 320/C14, 127-6 "cold" connections Protection Class Snap-in panel mount from front. "locking" snappers reinforce connector against repeated excessive pull force during plug removal Fuse replacement requires opening equipment Ground terminal solder/quick-connect 0.8mm 0.8mm; line neutral terminals solder/quick-connect 0.8mm Terminals positioned access from top, bottom back connector Material: temperature resistant thermoplatic (UL94V-O). Terminals: brass, tin-plated Max. power dissipation 3.15 watts (1-pole) watts (2-pole) according 127-6 recognition certification approval approval approval 10A/250V 10A/250V 10A/250V 10A/250V 10A/250V File #E93617 File #LR38456 File #86959
File numbers request
Standard configuration. Contact Schurter non-standard configuration order minimums. Fuses ordered separately; available pre-installed request. more information, "International Circuit Protection Power Entry Devices" catalog.
Ordering example: GSF2.2011.01
Black housing Snap-in mounting from front Ground terminal solder/quick-connect 0.8mm Line Neutral terminals solder/quick-connect 0.8mm 2-pole fusing, with fuse clips 20mm fuses inlet panel mounting
SEMKO
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
6600 4721 4300 Outlets Panel Mounting
"cold" connections 70°C, Protection Class Screw mount from front rear, snap-in mount from front torque required screws screw-on types
6600 panel mounting
Solder terminals .138 .032" (3.5 0.8mm) quick-connect terminals .187 .032" (4.8 0.8mm) .250 .032" (6.3 0.8mm) Material: thermoplastic, Polyamid 6.6; prongs terminals: brass, tin-plated insulation cover, page
6600 6600
recognition certification approval SEMKO, appr.
15A/250V 15A/250V 10A/250V 10A/250V
File #E103791 File #LR38456 File #2772, expert report documents request
4721 4724 shuttered outlets panel mounting
Shuttered outlet 4724
Solder terminals, quick-connect 4.8mm quick-connect 6.3mm only Material: modified 94V-0) Contacts: brass, bright electro-tin plated recognition 10A/250V File #E83589(M) certification 10A/250V File #056242X0000 approval 10A/250V File #80642 recognition Canada) 15A/250V pending
4300 mounting
Right angle mount with screw-on panel mount from rear (wave solderable washable aqueous solutions) Combination solder/quick-connect terminals .187 .032" (4.8 0.8mm) Material: thermoplastic 94V-O); prongs terminals: brass, nickel-plated recognition certification approval SEMKO, appr. 15A/250V 15A/250V 10A/250V 10A/250V File #E93616 File #LR70111 File #1930, expert report documents request
4721
4300
Standards: 60320; 320/F/H
6600 Snap-in
6600 Screw-on
24.1 solder, 27.5 quick-connect (6.3 0.8mm) 26.5 quick-connect (4.8 0.8mm)
panel thickness 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm
24.1 solder, 27.5 quick-connect (6.3 0.8mm) 26.5 quick-connect (4.8 0.8mm)
4721 Screw-on
49.0 40.0 2.5000
PANEL CUT-OUT
32.5
HOLES
4300 mount Shutter operation
30.0 holes C'SK 40.0
TABS 32.2 TABS 30.5 SOLDER 28.4
24.8
SHUTTERS OPENED PLUG INSERTION
4724 Snap-in
35.0
2.5000 PANEL CUT-OUT 32.5 4.00
28.0 SHUTTERS OPENED PLUG INSERTION
TABS TABS SOLDER
32.2 30.5 28.4
+0.20 24.8 0.00
Order Numbers (type)
6600 Snap-in 6600.41XX (6600-41/.) 6600.42XX* (6600-42/.) 6600.43XX (6600-43/.) Screw-on 6600.3100 (6600-31) 6600.3200* (6600-32) 6600.3300 (6600-33) Terminal Type solder .138" .032" (3.5 0.8mm) quick-connect .187" .032" (4.8 0.8mm) quick connect .250" .032" (6.3 0.8mm) 4724 Snap-in (1.5mm) 4724.0300 shuttered 4724.0100 shuttered 4724.0000 shuttered 4721 Screw-on 4721.0300 shuttered 4721.0100 shuttered 4721.0000 shuttered Terminal Type solder only quick-connect 4.8mm quick-connect, 6.3mm 4300 Screw-on 4300.0251 (P675PC) Terminal Type solder
XX=panel thickness1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm (e.g. 6600.4110=1.0mm). order rivet mount types 6600, change fifth digit part number from (e.g. 6600.9100, etc.) Contact Schurter, Inc. order minimum.
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
10.3
SHUTTERS CLOSED
0909 4752-55 Outlets Panel Mounting
"cold" connections 70°C, Protection Class Snap-in mount from front
0909 panel mounting (uninsulated terminals)
With rear insulation cover (series 475)
Solder terminals 0.8mm Material: thermoplastic 94V-0) Prongs terminals: brass, nickel-plated C-UL recognition recognition approval 15A/250V 15A/250V 10A/250V File #E103791 File #E103791 File #112657
4752 4753 snap-in panel mounting (insulated terminals)
Solder terminals, quick-connect 6.3mm solder, quickconnect 6.3mm only Material: 94V-0) Contacts: brass, electro-tin plated
0909 4752 4753
recognition certification approval
15A/250V 15A/250V 10A/250V
File #E83589(M) File #LR56242-11 File #95796
approvals types with both quick-connect 6.3mm solder terminals. Solder only quick-connect only have approvals pending 15A/250V (C-UL-US) 10A/250V (VDE).
4754 4755 snap-in panel mounting (insulated terminals)
Solder terminals, quick-connect 6.3mm solder, quickconnect 6.3mm only Material: 94V-0) Contacts: brass, electro-tin plated
Cut-out accepts snap-in inlet: 6100.4120, .4220 .4320 (see page 4754 4755
recognition certification approval
15A/250V 15A/250V 10A/250V
File #E83589(M) File #LR56242-11 File #95796
approvals types with both quick-connect 6.3mm solder terminals. Solder only quick-connect only have approvals pending 15A/250V (C-UL-US) 10A/250V (VDE). Standards: 60320; 320/F/H
0909 Outlets (uninsulated terminals)
4752 4753 Outlets (insulated terminals)
4754 4755 Outlets (insulated terminals)
CUT-OUT CLIPIN SCHURTER INLET
Cut-out 1.5mm panel
25.2
25.2
48.3 strip) 72.3 strip) 96.3 strip) 120.3 strip) 144.3 strip) 168.3 strip)
SOLDER TABS
SOLDER TABS
25.2
PANEL CUT-OUT 96.2mm 32.5mm MAXIMUM CORNER RADII
PANEL CUT-OUT 122.1mm 32.5mm MAXIMUM CORNER RADII
Order Numbers Uninsulated Terminals 0909 Pre-wired Terminal Snap-in Configuration Type 0909.0001 outlets solder, 3.0x0.8mm 0909.0011* outlets solder, 3.0x0.8mm 0909.0021 outlets solder, 3.0x0.8mm 0909.0031* outlets solder, 3.0x0.8mm 0909.0041 outlets solder, 3.0x0.8mm 0909.0051* outlets solder, 3.0x0.8mm Contact Schurter, Inc. order minimum.
Order Numbers Insulated Terminals outlets only) Quad Block Quad Block 4752 4753 4754 4755 Panel Terminal Class Class Class Class Thickness Types 4752.4000 4753.4000 4754.4000 4755.4000 1.5mm 6.3mm quick-connect, solder 4752.4200 4753.4200 4754.4200 4755.4200 1.5mm 6.3mm, quick-connect only 4752.4400 4753.4400 4754.4400 4755.4400 1.5mm solder only order other panel thickness, *change fifth digit part number: 2=0.8mm, 3=1.0mm, 5=2.0mm, 6=2.5mm, 7=3.0mm, 8=1.2mm (i.e.4752.5000=for panel thickness). Contact Schurter, Inc. order minimum. White plastic available request.
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
4300 Inlet outlet Panel Mounting
"cold" connections 70°C, Protection Class
(VDE)
Simultaneously switch equipment peripherals
panel mounting
panel mounting inlet/outlet with integral 1-pole 2-pole on/off line switch, rush max., 100A 3-4ms, followed continuous current on/off cycles 10,000 acc. 61058-1 Simultaneously switch equipment peripherals Independent, position voltage selector optional (voltage markings 230) Snap-in panel mount from rear Solder/quick-connect terminals .187 .032" (4.8 0.8mm); solder terminals (1.5 mm2) voltage selector Ground terminal screw mounts panel solder lug, +0.05) Rear insulation cover protects against inadvertent electrical contact With internal connections (except voltage selector) Ideal switch mode power supplies (SMPS) Material: thermoplastic, 94V-0) Prongs terminals: copper-alloy, corrosion proof recognition certification approval 10A/250V 10A/250V 10A/250V File #E96454 File #LR38456 File #6090, expert report
mounting (see page
4300 panel mounting Snap-in panel mount from front Solder/quick-connect terminals .187 .032" (4.8 0.8mm) Available with without internal connections between ground terminals Material: thermoplastic, polyamid Prongs terminals: brass, nickel-plated recognition certification approval 10A/250V 10A/250V 10A/250V File #E103791 File #LR73165 File #3193, expert report
Standards: 60536; 320/C14/F; 60320
4300 panel mounting
panel mount
4300, panel mount
15.4
33.74
+0.0
64.7
66.7
15.5
13.44 26.2
Panel thickness technical data
S±0.05
63.5
solder lugs
21.3
17.46 16.3
Voltage selector
63.7
jumper
With 2-pole switch
Voltage selector
Position
15.6
Appliance-inlet
32.2
1-pole 4307.3001 4307.3211 4307.3004 4307.3214
2-pole 4307.4001 4307.4211 4307.4004 4307.4214
Voltage selector without with (115/230) without with (115/230)
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
Position
Appliance-outlet
Order Numbers Panel thickness 4300 4300.0301 (0712) 4300.0303 (0712) Type Internal Connection without internal connection between ground terminals with internal connection between ground terminals Terminal Type quick-connect .187 .032" (4.8 0.8mm) quick-connect .187 .032" (4.8 0.8mm)
6110 6120 Inlets "Hot" Connections
(VDE)
"hot" connections 120°C (6110) 155°C (6120), Protection Class Screw mount from front rear, snap-in mount from front Solder terminals .138 .032" (3.5 0.8mm) quick-connect terminals .187 .032" (4.8 0.8mm) .250 .032" (6.3 0.8mm) torque required screws screw-on type inlet with filter 5110, page insulation cover cord retaining clamp, page Material: thermoplastic, polyamid (6110 series: 94V-0) Prongs terminals: brass, tin-plated recognition certification approval approval 15A/250V File #E96454 15A/250V File #LR38456 10A/250V File #3173, expert report (6110.4XXX 6120) 10A/250V File #77561 (6110.3XXX) File 10A/250V numbers 10A/250V request
6110
6120
SEMKO approval approval
Standards: 60320; 320/C16
6110 Screw-on
6110 Snap-in
6120 Screw-on
6120 Snap-in
solder terminals 20.5mm, quick-connect 23.5mm
solder terminals 22.5mm, quick-connect 25.5mm panel thickness 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm
solder terminals 20.5mm, quick-connect 23.5mm
solder terminals 22.5mm, quick-connect 25.5mm panel thickness 1.5, 2.5, 3.0mm
6110,120°C Snap-in 6110.41XX* (6110-41/.) 6110.42XX* (6110-42/.) 6110.43XX (6110-43/.)
Screw-on 6110.3100 (6110-31) 6110.3200 (6110-32) 6110.3300 (6110-33)
Order Numbers (type) 6120,155°C Terminal Type Snap-in solder .138" .032" 6120.51XX (3.5 0.8mm) (6120-51/.) quick-connect 6120.53XX .187" .032" (4.8 0.8mm) (6120-53/.) quick-connect .250" .032" (6.3 0.8mm)
Screw-on 6120.3100 (6120-31) 6120.3300 (6120-33)
Terminal Type solder .138" .032" (3.5 0.8mm) quick-connect .250" .032" (6.3 0.8mm)
panel thickness 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm (e.g. 6110.4110 1.0mm) order rivet mount types series 6110, change fifth digit part number from (e.g. 6110.9100, etc.) *Contact Schurter order minimum.
panel thickness 1.5, 2.5, 3.0mm (e.g. 6120.5130 3.0mm) *Contact Schurter order minimum.
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
6153 6653 Inlet Outlet High Current
"cold" connections 70°C, Protection Class inlet outlet high currents inlet outlet screw-on from front Solder terminals .158 .032" (4.0 0.8mm), quick-connect .250 .032" (6.3 0.8mm) solder/quick connect .187 .032" (4.8 0.8mm) torque required screws Material: thermoplastic 94V-O; (outlet with solder terminals 94V-2) Prongs terminals: brass recognition certification approval 20A/125V, 16A/250V 20A/125V, 16A/250V 16A/250V 16A/250V 16A/250V File #E96454/103791 File #LR20028/73165 File #60314
File numbers request
6153
SEMKO approval approval
6653
Standards: 60320; 320/C19 (outlet), (inlet), 0625
6153 inlet (0722)
6653 outlet (0723)
quick-connect terminals 6.3x0.8
6153 inlet 6153.3100 (0722) 6153.3300 (0722)
Terminal type solder/quick-connect terminals .187 .032" (4.8 0.8mm) quick-connect terminals .250 .032" (6.3 0.8mm)
Order Numbers (type) 6653 outlet 6653.3100 (0723) 6653.3300 (0723)
Terminal type solder terminals .158 .032" (4.0 0.8mm) quick-connect terminals .250 .032" (6.3 0.8mm)
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
4300 Inlets Current
"cold" connections 70°C, Protection Class Screw mount from front rear, snap-in mount from front terminals solder terminals low-current inlet with switch CMF, page Material: thermoplastic, (30% glass fiber) Prongs terminals: brass, tin-plated Class File #E96454 File #LR73165 File #88472
File numbers request
Snap-in 4300.0098
Screw-on 4300.0096
SEMKO
recognition certification approval approval approval
2.5A/250V 2.5A/250V 2.5A/250V 2.5A/250V 2.5A/250V
Class #E96454 #LR73165 #112138
File numbers request
mount 4300.0099
mount 4300.0097
Screw-on 4300.0100 (available 1998)
mount 4300.0101 (available 1998)
Standards: 498; 22.2; 60320; 320/C8/C6
4300.0098 0099
4300.0100
4300.0096 0097
4300.0101
4300 Class (2-pin) Snap-in 4300.0098 (0721) 4300.0099 (0721)
Screw-on 4300.0096 (0720) 4300.0097 (0720)
Order Numbers (type) 4300 Class (3-pin) Screw-on 4300.0100 (0724) 4300.0101 (0724)
Terminal type solder terminals terminals
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
4300 NEMA 5-15R Outlets
Protection Class Class Snap-in panel mount from front Material: thermoplastic, nylon Terminals: brass, tin-plated
4300.0701/02/03 4300.0705
recognition certification
15A/125V File #E132269 15A/125V File #073690
File #E101351 File #63196
4300.0701
4300.0702
Solder/quick-connect terminals .187 .020" (4.8 0.6mm)
V-slotted terminals connecting multiple receptacles
Installation Diagram 4300.0702
4300.0703
4300.0705
Sockets quick-connect tabs .205" (5.2mm) solid wires (12-14AWG)
Solder/quick-connect terminals .187 .020" (4.8 0.6mm)
4300.0703: .205" application
4300.0703: solid wire application
Note: terminate quick-connects after cover attached
Standards: 4300.0701/02/03: NEMA 5-15R 4300.0705: 498, 22.2, NEMA 1-15R
Note: terminate solid wires before attaching cover
4300.0701
panel thickness 1.6mm PANEL THICKNESS 24.6 25.2 26.2
4300.0702
panel thickness 1.6mm
PANEL THICKNESS 0.8-1.2 1.3-1.6
24.6 24.8
4300.0703
4300.0705
panel thickness 1.5mm
NEMA 4300.0701 4300.0702 4300.0703 4300.0705
(0709) (0709-1) (0710) (0715)
Protection Class Class Class Class Class
Order Numbers (type) Terminal socket type solder/quick-connect terminals .187 .020" (4.8 0.6mm) V-slotted terminals AWG) sockets quick-connect tabs .205" (5.2mm) solid wire termination (12-14 AWG) solder/quick-connect terminals .187 .020" (4.8 0.6mm)
Panel 0.8-1.6mm 0.8-1.6mm 0.8-3.0mm 0.8-1.5mm
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
PLUG MATES Rewireable
4300.0922 (mates with outlet)
"cold" connections 65°C, Protection Class inlet plug high currents, with straight cable entry North American cordage 16/3 12/3 (.325 .475" dia.), International (HAR Cord) 3x1.5mm2 3x2.5mm2 12mm dia.) Disassemble plug cable connection Housing: thermoplastic; prongs terminals: brass mating outlet 6653, page
4300.0922
listing certification pending
20A/250V 20A/250V
File E96454 File #LR702825
4300.0921 (mates with inlet) "cold" connections 65°C, Protection Class outlet plug high currents, with straight cable entry North American cordage 16/3 12/3 (.275 .475" dia.), International (HAR Cord) 3x1.5mm2 3x2.5mm2 12mm dia.) Disassemble plug cable connection Housing: thermoplastic; prongs terminals: brass mating inlet/filter C20F, page mating inlet 6153, page
4300.0921
Standards: 320/C19 (outlet), /C20 (inlet)
listing certification pending
20A/250V 20A/250V
File E96454 File #LR702825
CORDSET
0888.0220 (mates with inlet) North American cordset, with Nema 5-15P plug cordage (3x14 AWG), black, foot length molding mating inlet/filter C20F, page mating inlet 6153, page listing certification 15A/125V 15A/125V File #E191239 File #LR702497
Medical grade cordset development. Contact Schurter Inc. availability.
Nema 5-15P max. rating Standards: 320/C19 (outlet end) Standards: Nema 5-15P (plug end)
0888.0220
CORD RETAINING CLAMP prevents loosening accidental removal plug
34.0
32.1
25.7
CAPTIVE 24.1
CAPTIVE
Contact Schurter Inc. ordering data
43.2
12.7
43.2
12.7
rewireable plug mate 4300.0921
cordset
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
PLUG MATES Rewireable
Enhanced designs available:
"cold" connections 70°C, Protection Class inlet plugs with straight cable entry Standard 4300 Series: Max. wire size (1.0 mm2) Disassemble plug cable connection Material: thermoplastic, 94V-O Prongs terminals: brass, tin-plated recognition certification approval 10A/250V 10A/250V 6A/250V File #E96454 File #LR70111 File number request Captive internal contacts easier more reliable wiring Cable clamp screw mounts inside plug secure cable
4300.0407 4732.0000 4735.0000
4300.0411 4733.0000 4736.0000
Enhanced 473X Series Captive internal contacts Cable clamp screw mounts inside plug secure cable Strain reliefs either harmonized (1.5 mm2) (1.0 cable sizes Body material: PPO, 94V-0 Contact material: brass, nickel plated 4732 4733 4735 4736 recognition 10A/250V File #E83589 15A/250V File #E83589 certification 10A/250V File #LR56242 15A/250V File #201904 approval 10A/250V File #83423 10A/250V File #124716
Standards: 60320; 320/E
4300.0401
4300.0407
4300.0411
4300.0401 4733.0000 4732.0000
20.8
20.8
47.0
81.0
28.7 44.5
28.7
70.0
55.5 *O7mm
O7mm
4736.0000 4735.0000
21.6 85.5
28.7 44.5 21.6 49.8
28.7
70.0
60.0 *O8.5mm
O8.5mm
Order Numbers (type)
Inlet plug, cable entry straight plug axis) 4300.0407 (8143) 4732.0000 4735.0000 Inlet plug, cable entry angled (90° plug axis) 4300.0411 (8143.A) 4733.0000 4736.0000 Inlet plug, cable entry angled (90° plug axis) 4300.0401 (P685) Max. cable size
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
PLUG MATES Rewireable
Enhanced designs available:
Captive internal contacts easier more reliable wiring Cable clamp screw mounts inside plug secure cable
4300.0602 4782.0100 4782.0000
"cold" connections 70°C, Protection Class outlet plugs with straight cable entry Standard 4300 Series: Max. wire size (1.0 mm2) Disassemble plug cable connection Material: thermoplastic, 94V-O (4300.0609 94V-2) Contact material: brass, nickel-plated 4300.0602 10A/250V File #E96454 10A/250V File #LR70111 10A/250V File #63826 File 10A/250V numbers request 10A/250V 4300.0606 0609 File #E96454 File #LR70111 File #69635
File numbers request
SEMKO
4300.0606 4785.0100 4785.0000
recognition certification approval approval approval
*4300.0609: 15A/125V, 10A/250V
4300.0609
Enhanced 4782 4785 Series: Captive internal contacts Cable clamp screw mounts inside plug secure cable Strain reliefs either harmonized mm2, cable sizes Body material: PA6, 94V-0 Contact material: brass recognition certification approval 15A/250V 15A/250V 10A/250V File #E83589(M) File #LR56242-15 File #100043
Standards: EN60320; 320/C13
4300.0602
4300.0606
4300.0609 4782 Series, Straight
61.5
28.7
Internal cable clamp
87.0
51.0
4785 Series, Angled
28.7
44.5 70.0
Internal cable clamp
1.0mm2 cable cable
Order Numbers (type)
Outlet plug, cable entry straight plug axis) 4300.0602 (P587) 4782.0100 4782.0000 Outlet plug, cable entry angled (90° plug axis) 4300.0606 (P587SE) 4785.0100 4785.0000 Outlet plug, cable entry angled (90° plug axis) 4300.0609 (SFO430) Max. cable size
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
PLUG MATES
Enhanced designs available:
Rewireable "Hot" connections 120°C
outlet plugs with straight angled cable entry "hot" connections 120°C, Protection Class Standard 4300 Series: Max. wire size (1.5 mm2) Disassemble plug cable connection Material: thermoplastic, 94V-2 Contact material: brass listing certification approval 15A/250V 15A/250V 10A/250V File #E96454 File #LR38456 File #73759
Captive internal contacts easier more reliable wiring Strain reliefs either harmonized mm2, cable sizes
4300.0603 4781.0100 4781.0000
Enhanced 4781/4784 Series: Captive internal contacts Cable clamp screw mounts inside plug secure cable Strain reliefs either harmonized mm2, cable sizes Disassemble plug cable connection Body material: PA6, 94V-0 Contact material: brass recognition certification approval 15A/250V 15A/250V 10A/250V File #E83589(M) File #LR56242-15 File #100043
4300.0607 4784.0100 4784.0000
Standards: EN60320; 320/C15
4300.0603
4300.0607
4781 Series, Straight
21.0 61.5
4784 Series, Angled
21.0 51.0
28.7
28.7
44.5
70.0
87.0
Internal cable clamp
Internal cable clamp
1.0mm2 cable cable 1.0mm2 cable cable
Order Numbers (type)
Outlet plug, 120°C, cable entry straight plug axis) 4300.0603 4781.0100 4781.0000 (8943.W) Outlet plug, 120°C, cable entry angled (90° plug axis) 4300.0607 4784.0100 4784.0000 (8943.L.W) Max. Cable Size
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
CORDSETS International
"cold" connections Protection Class Standards: 60320;
North America
Standards: 817, 22.2-21 182.3
Japan
Standard: 8303
Continental Europe
Standard:
United Kingdom,
Hongkong, Malaysia, Singapore; Standards: 1363A; 4491
Italy
Standard: 23-16
Cord type: Conductor: Strand: 0.16 Length: feet Overall Dia.: 7.80 Rated amps/125 volts Color: black
Cord type: HVCTF3G0.75 Conductor: 0.75 Strand: 0.18 Length: 2.00 meters Overall Dia.: Rated amps/125 volts Color: black
Cord type: HO5VV-F3G1.0 Conductor: 1.00 Length: 2.50 meters Overall Dia.: 7.20 Rated amps/250 volts Color: black
Cord type: HO5VV-F3G1.0 Conductor: 1.00 Length: 2.50 meters Overall Dia.: 7.20 Rated amps/250 volts Includes fuse Color: black
Cord type: HO5VV-F3G1.0 Conductor: 1.00 Length: 2.50 meters Overall Dia.: 7.20 Rated amps/250volts Color: black
Order Numbers
4300.0901 4300.0902 4300.0903 4300.0904 4300.0905
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
CORDSETS International
"cold" connections Protection class Standards: 60320;
EANSW
Switzerland
Standard: 1011
Australia Zealand
Standards: 3112-1990, 3109
American Jumper
Standards: 817, C22.2-21 182.3, 320-2-2
International Jumper
Standards: 60320 C14, 320-2-2
Medical Grade
Standards: NEMA 5-15P
Medical caution labels available request
Cord type: HO5VV-F3G1.0 Conductor: 1.00 Length: 2.50 meters Overall Dia.: 7.10 Rated amps/250 volts Color: black
Cord type: HO5VV F3G1.0 (4300.0907); 3ASL/ 1003G1.0 (4300.0908) Conductor: 1.00 Length: 2.50 meters Overall Dia.: 7.20 Rated amps/250 volts Color: black
Cord type:SJT Conductor: Strand: 0.16 Length: 1.00 meters Overall Dia.: 7.80 Rated amps/125V Color: black
Cord type: HO5VV-F3G1.0 Conductor: 1.00 Strand: 0.20 Length: 1.00 meter Overall Dia.: 7.10 Rated amps/250 volts Color: black
Cord type: Conductor: Strand: 0.16 Length: feet Overall Dia.: 7.80 Rated amps/125, volts; 15A/125 volts Color: clear
Order Numbers
4300.0906 4300.0907 (acc. EANSW) 4300.0908 (acc. QEC) 4300.0909 4300.0910 4300.0920
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
Cordsets Miniature, Current (2.5A/250V)
Europlug
Nema (U.S. Canada)
Continental Europe
(polarized)
United Kingdom
Ordering example cordsets:
current inlet switch, page
Order Numbers
Cordset CS01.0221.150 CS02.0221.150 Equipment plug (non-polarized) mates connector plug (polarized) mates connector plug (non-polarized) mates connector plug (non-polarized) mates connector plug (non-polarized) mates connector plug (polarized) mates connector plug (polarized) mates connector plug (polarized) mates connector Destination Nema 1-15P Nema 1-15P Europlug 7/16 Cordage standard SPT2 standard SPT2 H03VVH2-F Color Black Black Length Cable (standard)* 1500mm 1500mm Rated Current /125V 2.5A/250V Approvals #E55943SP #LR035162
#E136285; #LR86473 (destination end), #LL93548 (equipment end)
CS01.0121.150
Black
1500mm
2.5A/250V
VDE, SEV, Semko, KEMA, NEMKO,OVE, CEBEC, DEMKO, SETI, UTE,
CS01.0321.150
Continental Europe United Kingdom 1363 United Kingdom 1363 Schuko Plug North America NEMA 5-15P (U.S.)
H03VVH2-F
Black
1500mm
2.5A/250V
VDE, Semko, NEMKO, OVE, CEBEC, SETI, UTE, KEMA ASTA (United Kingdom) ASTA (United Kingdom) VDE, Semko, NEMKO, OVE, CEBEC, SETI, UTE, KEMA
CS01.0421.150 CS03.0421.150
H03VVH2-F H03VV-F
Black Black
1500mm 1500mm
2.5A/250V 2.5A/250V
CS03.0521.150
H03VV-F standard SPT2
Black
1500mm
2.5A/250V
CS03.0621.150
Black
1500mm
2.5A/250V
*Other cable lengths available. Contact Schurter, Inc. minimums lead-times.
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
Accessories Inlets, Plugs Power Entry Modules
Insulation Cover Inlets, Outlets Power Entry Modules
(2-pole) Series 6200 Series 6100 Series 6600 (1-pole)
Technical Data: Material: flexible plastic Surface resistance: humidity
Easily mountable from back side Oxygen Index Rating: (tested Cookson Labs) Based Oxygen Index Rating, material qualifies 94V-O
Order Numbers Order Series 0859.0047 with without bowden cable 0859.0047 with without bowden cable 0859.0075 part numbers 0859.0072 Series 6100 6102 6110 6120 0859.0074 Series 6200 6202 6220 6600 0859.0076 Order 0859.0109 0859.0077 0859.0108 0859.0048 0859.0047
Series (except mount type) (1-pole) part numbers (2-pole) part numbers part numbers with without bowden cable part numbers
Cord Retaining Clamp prevent loosening accidental removal)
0888.0001 Clamp with hexnuts Drawing 0888.0004/0005 only: Clamp with hexnuts filter type: nominal size +0.5mm
Selection Chart Cord Retaining Clamp
Select desired inlet plug. Match corresponding number legend right identify retaining clamp order number. Inlet snap-in screw-on screw-on
Dim. Order (mm)
0888.0001 0888.0004 0888.0005 0888.0015 0888.0016 0888.0017 38.0 39.0 41.0 45.5 48.0 43.0
FELCOM
5100 screw-on
5110 screw-on
5200 screw-on
5220 screw-on
6100 screw-on
6110 screw-on
6200 screw-on
6220 screw-on
Plug 4300.0602 4300.0603 4300.0407
PowerTel Tamper-Evident Plug
Determines when equipment been used Ideal sorting sterilized versus non-sterilized used equipment Fits 320/C14 receptacle "cold" connections (70°C), part 0888.0250 "hot" connections (120°C 155°C), part 0888.0251
Schurter, Inc. Phone 707-778-6311 707-778-6401 E-mail info@schurterinc.com Website http://www.schurterinc.com
6600 screw-on
snap-in
6100 snap-in
6110 snap-in
6200 snap-in
6220 snap-in
Other recent searches
SPW24N60C3 - SPW24N60C3 SPW24N60C3 Datasheet
SN74LVCE161284 - SN74LVCE161284 SN74LVCE161284 Datasheet
S3S3 - S3S3 S3S3 Datasheet
IRFY140-T257 - IRFY140-T257 IRFY140-T257 Datasheet
ELT23W - ELT23W ELT23W Datasheet
BR10SG - BR10SG BR10SG Datasheet
BLF051MGC-12V-P - BLF051MGC-12V-P BLF051MGC-12V-P Datasheet
APHK1608SECK - APHK1608SECK APHK1608SECK Datasheet
AN241 - AN241 AN241 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
