467/468 MKT/MKT Metallized polyester film capacitors Product spec
|
|
|
Top Searches for this datasheet
467/468 MKT/MKT Metallized polyester film capacitors
Product specification Supersedes data October 1996 File under Components, BC05 1999
Components
Product specification
Metallized polyester film capacitors
RADIAL EPOXY LACQUERED TYPE
467/468 MKT/MKT
PITCH 10/15/22.5/27.5 PITCH (bent back leads)
handbook, full pagewidth
(7.5/15 22.5 -27.5
CBA819
Fig.1 Simplified outlines.
APPLICATIONS Blocking coupling Bypass energy reservoir. FEATURES Low-inductive wound cell metallized (PETP) film Cell protected epoxy lacquer Radial leads solder-coated wire Withstands solvents rinsing liquids Small stand-off pips allow removal solder flux. DETAIL SPECIFICATION more detailed data test requirements "Type detail specification HQN-384-02/102".
QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (DC) voltage Rated (AC) voltage Climatic category Rated temperature Maximum application temperature Tangent loss angle Reference specifications Performance grade 0.01 ±10%; 1000 55/100/56 10-4 60384-2 grade (long life) VALUE
1999
Components
Product specification
Metallized polyester film capacitors
COMPOSITION CATALOGUE NUMBER TYPE PITCHES 10.0
MULTIPLIER (nF) CAPACITANCE (numerically)
Example:
2222
TYPE
PACKAGING
LEAD CONFIGURATION lead length
C-TOL ±10% ±10% ±10%
loose taped reel lead length 19.0 16.0 12.7
1999
Components
Product specification
Metallized polyester film capacitors
TYPE PITCHES 15/7.5 15.0 22.5 27.5 15.0 MKT/MKT 22.5 27.5 Example: CAPACITANCE (numerically)
MULTIPLIER (nF)
2222
TYPE
PACKAGING
LEAD CONFIGURATION lead length
C-TOL ±10% ±10% ±10% ±10% ±10%
1000
loose long leads taped reel taped reel (bent back) MKT/MKT loose 16.0 12.7 16.0 15.0 lead length
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
PITCH (kinked leads)
handbook, full pagewidth
seating plane(1)
CBA100
Hole 50°.
Fig.4 Outline.
Specific reference data capacitors VALUE DESCRIPTION Tangent loss angle: 0.56 Rated voltage pulse slope (dU/dt)R (DC) between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose 19.0 ±4.0 Taped reel Notes refer this handbook, chapter "Packaging information". in-tape height; detailed specifications refer this handbook, chapter "Packaging information". 16.0 note C-tol ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request 10-4 V/µs >5000 >30000 minute minute 10-4
1999
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER (µF) DIMENSIONS bmax lmax (mm) MASS LOOSE C-tol ±10% catalogue Pitch 10.0 ±0.4 0.60 ±0.06 ±0.5 0.56 0.68 0.82 Note shading indicates preferred types. 13.5 12.5 14.0 12.5 14.5 12.5 15.0 12.5 2222 04564 2222 04684 2222 04824 2222 04105 number(1)
C-tol last digits(1)
05564 05684 05824 05105
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
PITCH (kinked leads)
handbook, full pagewidth
seating plane(1)
CBA100
Hole 50°.
Fig.5 Outline.
Specific reference data capacitors VALUE DESCRIPTION Tangent loss angle: 0.18 0.22 Rated voltage pulse slope (dU/dt)R (DC) between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose 19.0 ±4.0 Taped reel Notes refer this handbook, chapter "Packaging information". in-tape height; detailed specifications refer this handbook, chapter "Packaging information". 16.0 note C-tol ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request 10-4 10-4 V/µs >30000 >30000 minute minute 10-4
1999
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER (µF) DIMENSIONS bmax hmax lmax (mm) MASS LOOSE C-tol ±10% catalogue Pitch 10.0 ±0.4 0.60 ±0.06 +1.0/-0.5 0.18 0.22 Note shading indicates preferred types. 14.5 12.5 15.0 12.5 2222 16184 2222 16224 number(1)
C-tol last digits(1)
17184 17224
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
PITCH (kinked leads)
seating plane(1)
Hole 50°.
Fig.6 Outline.
CBA100
Specific reference data capacitors VALUE DESCRIPTION Tangent loss angle: Rated voltage pulse slope (dU/dt)R (DC) between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose 19.0 ±4.0 Taped reel Notes refer this handbook, chapter "Packaging information". in-tape height; detailed specifications refer this handbook, chapter "Packaging information". 16.0 note C-tol ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request 10-4 10-4 V/µs >30000 >30000 minute minute 10-4
1999
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER (µF) DIMENSIONS bmax hmax lmax (mm) MASS LOOSE C-tol ±10% catalogue Pitch 10.0 ±0.4 0.60 ±0.06 +1.0/-0.5 0.039 0.047 0.056 0.068 0.082 Note shading indicates preferred types. 14.0 12.5 14.5 12.5 13.5 12.5 14.0 12.5 14.5 12.5 2222 28393 2222 28473 2222 28563 2222 28683 2222 28823 2222 28104 number(1)
C-tol last digits(1)
29393 29473 29563 29683 29823 29104
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
PITCH (kinked leads)
handbook, full pagewidth
seating plane(1)
CBA100
Hole 50°.
Fig.7 Outline.
Specific reference data capacitors VALUE DESCRIPTION Tangent loss angle: 0.033 Rated voltage pulse slope (dU/dt)R (DC) between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose 19.0 ±4.0 Taped reel Notes refer this handbook, chapter "Packaging information". in-tape height; detailed specifications refer this handbook, chapter "Packaging information". 16.0 note C-tol ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request 10-4 10-4 V/µs >30000 >30000 1008 minute 1260 minute 10-4
1999
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER (µF) DIMENSIONS bmax hmax lmax (mm) MASS LOOSE C-tol ±10% catalogue Pitch 10.0 ±0.4 0.60 ±0.06 +1.0/-0.5 0.01 0.012 0.015 0.018 0.022 0.027 0.033 Note shading indicates preferred types. 13.0 12.5 13.5 12.5 14.0 12.5 14.5 12.5 14.0 12.5 14.5 12.5 15.0 12.5 2222 40103 2222 40123 2222 40153 2222 40183 2222 40223 2222 40273 2222 40333 number(1)
C-tol last digits(1)
41103 41123 41153 41183 41223 41273 41333
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
handbook, full pagewidth
PITCH 15/22.5 PITCH (bent back leads)
seating plane(1)
Dimensions Hole 50°. mm.; +0.6/-0.1
CBA818
Fig.8 Outline.
Specific reference data capacitors DESCRIPTION Tangent loss angle: 10.0 Rated voltage pulse slope (dU/dt)R (DC): lmax 17.5 lmax 26.0 between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose long leads; note Taped reel Taped reel (bent back) Notes refer this handbook, chapter "Packaging information". Length long leads: 19.0 ±4.0 lead pitch 15.0 25.0 ±4.0 lead pitch 22.5 in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". 16.0 12.7 note 16.0 15.0 note C-tol ±10% ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request preferred preferred VALUE 10-4 10-4
V/µs V/µs >5000 >30000 minute minute
1999
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER DIMENSIONS(1) bmax (h')max lmax (mm) LOOSE MASS short leads C-tol ±10% catalogue number(3) C-tol last digits(3)
(µF)
REEL DIAMETER 16.0 mm(2) pitch (bent back) C-tol ±10% C-tol
last digits(3)
Pitch 15.0 ±0.4 (pitch ±0.4 bent back leads); 0.80 ±0.08 +1.4/-0.5 14.5 (16.0) 17.5 15.0 (16.5) 17.5 15.5 (17.0) 17.5 16.0 (17.5) 17.5 17.0 (18.5) 17.5 17.5 (19.0) 17.5 18.5 26.0 19.5 26.0 20.0 26.0 21.5 26.0 22.5 26.0 10.5 23.5 26.0 2222 04125 2222 04155 2222 04185 2222 04225 2222 04275 2222 04335 05125 05155 05185 05225 05275 05335 61125 61155 61185 61225 61275 61335 62125 62155 62185 62225 62275 62335
Pitch 22.5 ±0.4 0.80 ±0.08 +1.4/-0.5 10.0 Notes Dimensions brackets bent back leads. in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". pitch 15.0 16.0 12.7 pitch 15/7.5 (bent back): 16.0 15.0 Standard reel diameter Small reel diameter available request. shading indicates preferred types. 2222 04395 2222 04475 2222 04565 2222 04685 2222 04825 2222 04106 05395 05475 05565 05685 05825 05106 available
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
handbook, full pagewidth
PITCH 15/22.5/27.5 PITCH (bent back leads)
seating plane(1)
Dimensions Hole 50°. mm.; +0.6/-0.1
CBA818
Fig.9 Outline.
Specific reference data capacitors DESCRIPTION Tangent loss angle: 0.47 0.47 Rated voltage pulse slope (dU/dt)R (DC): lmax 17.5 lmax 26.0 lmax 30.0 between leads, 0.33 minute between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose long leads; note Taped reel Taped reel (bent back) Notes refer this handbook, chapter "Packaging information"; taped reel pitch 27.5 available. Length long leads: 19.0 ±4.0 lead pitch 15.0 25.0±4.0 lead pitch 22.5 24.0 ±4.0 lead pitch 27.5 in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". 1999 16.0 12.7 note 16.0 15.0 note C-tol ±10% ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request preferred preferred VALUE 10-4 10-4 10-4 10-4 V/µs V/µs V/µs >30000 >10000 >30000 minute minute 10-4
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER DIMENSIONS(1) bmax (h')max lmax (mm) LOOSE MASS short leads C-tol ±10% catalogue number(3) C-tol last digits(3)
(µF)
REEL DIAMETER 16.0 15.0 mm(2) pitch (bent back) C-tol ±10% C-tol
last digits(3)
Pitch 15.0 ±0.4 (pitch ±0.4 bent back leads); 0.80 ±0.08 +1.4/-0.5 0.27 0.33 0.39 0.47 0.56 0.68 0.82 14.0 (15.5) 17.5 14.5 (16.0) 17.5 15.0 (16.5) 17.5 15.5 (17.0) 17.5 16.5 (18.0) 17.5 17.0 (18.5) 17.5 17.5 (19.0) 17.5 20.0 (21.5) 17.5 19.0 26.0 21.0 26.0 22.0 26.0 10.0 23.0 26.0 11.0 24.0 26.0 12.5 25.5 26.0 13.5 26.5 26.0 15.0 28.0 26.0 15.0 28.0 30.0 2222 16274 2222 16334 2222 16394 2222 16474 2222 16564 2222 16684 2222 16824 2222 16105 17274 17334 17394 17474 17564 17684 17824 17105 63274 63334 63394 63474 63564 63684 63824 63105 64274 64334 64394 64474 64564 64684 64824 64105
Pitch 22.5 ±0.4 0.80 ±0.08 +1.4/-0.5 2222 16125 2222 16155 2222 16185 2222 16225 2222 16275 2222 16335 2222 16395 2222 16475 17125 17155 17185 17225 17275 17335 17395 17475 63125 63155 63185 63225 63275 63335 63395 63475 64125 64155 64185 64225 64275 64335 64395 64475
Pitch 27.5 ±0.4 0.80 ±0.08 +1.4/-0.5 Notes Dimensions brackets bent back leads. in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". pitch 15.0 16.0 12.7 pitch 15/7.5 (bent back): 16.0 15.0 Standard reel diameter Small reel diameter available request. shading indicates preferred types. 2222 16565 17565 63565 64565
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
handbook, full pagewidth
PITCH 15/22.5/27.5 PITCH (bent back leads)
seating plane(1)
Dimensions Hole 50°. mm.; +0.6/-0.1
CBA818
Fig.10 Outline.
Specific reference data capacitors DESCRIPTION Tangent loss angle: 0.12 0.47 0.47 Rated voltage pulse slope (dU/dt)R (DC): lmax 17.5 lmax 26.0 lmax 30.0 between leads, 0.33 minute between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose long leads; note Taped reel Taped reel (bent back) Notes refer this handbook, chapter "Packaging information"; taped reel pitch 27.5 available. Length long leads: 19.0 ±4.0 lead pitch 15.0 25.0 ±4.0 lead pitch 22.5 24.0 ±4.0 lead pitch 27.5 in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". 1999 16.0 12.7 note 16.0 15.0 note C-tol ±10% ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request preferred preferred VALUE 10-4 10-4 10-4 10-4 V/µs V/µs V/µs >30000 >10000 >30000 minute minute 10-4
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER DIMENSIONS(1) bmax (h')max lmax (mm) LOOSE MASS short leads C-tol ±10% catalogue number(3) C-tol last digits(3)
(µF)
REEL DIAMETER 16.0 15.0 mm(2) pitch (bent back) C-tol ±10% C-tol
last digits(3)
Pitch 15.0 ±0.4 (pitch ±0.4 bent back leads); 0.80 ±0.08 +1.4/-0.5 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 14.0 (15.5) 17.5 15.0 (16.5) 17.5 15.5 (17.0) 17.5 16.0 (17.5) 17.5 16.5 (18.0) 17.5 17.5 (19.0) 17.5 19.5 (21.0) 17.5 20.5 (22.0) 17.5 19.5 26.0 21.0 26.0 22.0 26.0 10.0 23.0 26.0 11.0 24.0 26.0 11.5 24.5 30.0 12.5 25.5 30.0 14.0 27.0 30.0 2222 28124 2222 28154 2222 28184 2222 28224 2222 28274 2222 28334 2222 28394 2222 28474 29124 29154 29184 29224 29274 29334 29394 29474 65124 65154 65184 65224 65274 65334 65394 65474 66124 66154 66184 66224 66274 66334 66394 66474
Pitch 22.5 ±0.4 0.80 ±0.08 +1.4/-0.5 0.56 0.68 0.82 2222 28564 2222 28684 2222 28824 2222 28105 2222 28125 29564 29684 29824 29105 29125 65564 65684 65824 65105 65125 66564 66684 66824 66105 66125
Pitch 27.5 ±0.4 0.80 ±0.08 +1.4/-0.5 Notes Dimensions brackets bent back leads. in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". pitch 15.0 16.0 12.7 pitch 15/7.5 (bent back): 16.0 15.0 Standard reel diameter Small reel diameter available request. shading indicates preferred types. 2222 28155 2222 28185 2222 28225 29155 29185 29225 65155 65185 65225 66155 66185 66225
1999
Components
Product specification
Metallized polyester film capacitors
GENERAL DATA
handbook, full pagewidth
PITCH 15/22.5/27.5 PITCH (bent back leads)
seating plane(1)
Dimensions Hole 50°. mm.; +0.6/-0.1
CBA818
Fig.11 Outline.
Specific reference data capacitors DESCRIPTION Tangent loss angle: 0.47 0.47 Rated voltage pulse slope (dU/dt)R (DC): lmax 17.5 lmax 26.0 lmax 30.0 between leads, 0.33 minute between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available versions PACKAGING(1) DIMENSIONS ±0.5 Loose long leads; note Taped reel Taped reel (bent back) Notes refer this handbook, chapter "Packaging information"; taped reel pitch 27.5 available. Length long leads: 19.0 ±4.0 lead pitch 15.0 25.0 ±4.0 lead pitch 22.5 24.0 ±4.0 lead pitch 27.5 in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". 1999 16.0 12.7 note 16.0 15.0 note C-tol ±10% ±10% ±10% ±10% FIRST DIGITS CATALOGUE NUMBER 2222 2222 2222 2222 2222 2222 2222 2222 ORDERING preferred preferred request request request request preferred preferred VALUE 10-4 10-4 10-4 10-4 10-4 10-4 V/µs V/µs V/µs >30000 >10000 >30000 1008 minute 1260 minute 10-4 10-4
Components
Product specification
Metallized polyester film capacitors
URdc URac CATALOGUE NUMBER DIMENSIONS(1) bmax (h')max lmax (mm) LOOSE MASS short leads C-tol ±10% catalogue number(3) C-tol last digits(3)
(µF)
REEL DIAMETER 16.0 15.0 mm(2) pitch (bent back) C-tol ±10% C-tol
last digits(3)
Pitch 15.0 ±0.4 (pitch ±0.4 bent back leads); 0.80 ±0.08 +1.4/-0.5 0.039 0.047 0.056 0.068 0.082 0.12 0.15 14.0 (15.5) 17.5 14.5 (16.0) 17.5 15.0 (16.5) 17.5 16.0 (17.5) 17.5 16.5 (18.0) 17.5 17.0 (18.5) 17.5 19.5 (21.0) 17.5 20.5 (22.0) 17.5 19.5 26.0 21.0 26.0 22.0 26.0 10.0 23.0 26.0 11.0 24.0 26.0 12.5 25.5 26.0 13.5 26.5 26.0 15.0 28.0 26.0 15.0 28.0 30.0 2222 40393 2222 40473 2222 40563 2222 40683 2222 40823 2222 40104 2222 40124 2222 40154 41393 41473 41563 41683 41823 41104 41124 41154 67393 67473 67563 67683 67823 67104 67124 67154 68393 68473 68563 68683 68823 68104 68124 68154
Pitch 22.5 ±0.4 0.80 ±0.08 +1.4/-0.5 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 2222 40184 2222 40224 2222 40274 2222 40334 2222 40394 2222 40474 2222 40564 2222 40684 41184 41224 41274 41334 41394 41474 41564 41684 67184 67224 67274 67334 67394 67474 67564 67684 68184 68224 68274 68334 68394 68474 68564 68684
Pitch 27.5 ±0.4 0.80 ±0.08 +1.4/-0.5 0.82 Notes Dimensions brackets bent back leads. in-tape height; sprocket hole distance; detailed specifications refer this handbook, chapter "Packaging information". pitch 15.0 16.0 12.7 pitch 15/7.5 (bent back): 16.0 15.0 Standard reel diameter Small reel diameter available request. shading indicates preferred types. 2222 40824 41824 67824 68824
1999
Components
Product specification
Metallized polyester film capacitors
MKT/MKT GENERAL DATA
handbook, full pagewidth
MKT/MKT
PITCH 27.5
seating plane(1)
Hole 50°.
CBA266
Fig.12 Outline.
Specific reference data 1000 capacitors VALUE DESCRIPTION Tangent loss angle: 0.22 Rated voltage pulse slope (dU/dt)R 1000 (DC): 22.5 27.5 between leads, 0.33 minute between interconnecting leads casing; minute Withstanding (DC) voltage (cut current mA); rise time Withstanding (DC) voltage between leads case Available 1000 versions PACKAGING(1) Loose Note refer this handbook, chapter "Packaging information". DIMENSIONS C-tol ±10% FIRST DIGITS CATALOGUE NUMBER 2222 ORDERING preferred V/µs V/µs V/µs >30000 >30000 1600; minute 2000 minute 10-4 10-4 10-4 10-4 10-4 10-4
1999
Components
Product specification
Metallized polyester film capacitors
URdc 1000 URac (µF) DIMENSIONS bmax hmax lmax (mm)
MKT/MKT
CATALOGUE NUMBER(1) MASS LOOSE BOX; ±0.5 C-tol ±10%
Pitch 15.0 ±0.4 0.80 ±0.08 2.5+1.4/-0.5 0.015 0.018 0.022 0.027 0.033 0.039 0.047 15.0 17.5 15.0 17.5 15.5 17.5 17.0 17.5 17.5 17.5 18.5 17.5 20.0 26.0 20.5 26.0 21.5 26.0 22.0 26.0 10.0 23.0 26.0 10.0 23.0 30.0 11.0 24.5 30.0 12.0 25.5 30.0 2222 60153 2222 60183 2222 60223 2222 60273 2222 60333 2222 60393 2222 60473
Pitch 22.5 ±0.4 0.80 ±0.08 2.5+1.4/-0.5 0.056 0.068 0.082 0.12 2222 60563 2222 60683 2222 60823 2222 60104 2222 60124
Pitch 27.5 ±0.4 0.80 ±0.08 2.5+1.4/-0.5 0.15 0.18 0.22 Note shading indicates preferred types. 2222 60154 2222 60184 2222 60224
1999
Components
Product specification
Metallized polyester film capacitors
CONSTRUCTION Description Low-inductive wound cell metallized polyethylene terephthalate film Protected hard, water repellent, solvent resistant epoxy lacquer Radial leads, copper wire, solder coated. Mounting NORMAL
467/468 MKT/MKT
capacitors designed mounting printed-circuit boards. capacitors packed bandoliers designed mounting printed-circuit boards means automatic insertion machines. detailed tape specifications refer this handbook, chapter "Packaging information". SPECIFIC METHOD MOUNTING WITHSTAND VIBRATION
metallized polyester film
handbook, halfpage
SHOCK
order withstand vibration shock tests, must ensured that underside crimps good contact with printed-circuit board: pitches capacitors shall mechanically fixed leads. larger pitches capacitors shall mounted same body clamped.
metal spray layer
Storage temperature Storage temperature: Tstg with maximum without condensation.
CBA073
connecting wire
Fig.13 Construction: 100, 250,
RATINGS CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, electrical values apply ambient free temperature atmospheric pressure relative humidity ±2%. reference testing, conditioning period shall applied over hours heating products circulating oven rated temperature relative humidity exceeding 20%.
metallized polyester film
handbook, halfpage
metal spray layer
connecting wire
CBA229
Fig.14 Construction: MKT/MKT 1000
1999
Components
Product specification
Metallized polyester film capacitors
CHARACTERISTICS Capacitance
467/468 MKT/MKT
CBA074
handbook, full pagewidth
(Hz)
Fig.15 Capacitance change function frequency: typical curve.
CBA922
handbook, full pagewidth
max.
1000
typical
min.
Tamb (°C)
Fig.16 Capacitance function ambient free temperature, measured kHz,
1999
Components
Product specification
Metallized polyester film capacitors
Impedance
467/468 MKT/MKT
handbook, full pagewidth Impedance
CBA820
467/468
10-1
10-2
(Hz)
Fig.17 Impedance function frequency: typical curve.
Maximum voltage function temperature
CBA086
handbook, full pagewidth
factor
Tamb (°C)
Fig.18 Multiplying factor voltage function temperature.
1999
Components
Product specification
Metallized polyester film capacitors
Maximum voltage current (sinewave) function frequency
467/468 MKT/MKT
handbook, full pagewidth
CBA809
467/468
voltage
(lmax 12.5 (lmax 17.5 (lmax 26.0 (lmax 26.0 (Hz)
Fig.19 voltage (RMS value) function frequency Tamb URdc
handbook, full pagewidth
CBA810
467/468
voltage
(lmax 12.5 (lmax 17.5 (lmax 26.0 (lmax 26.0 (Hz)
Fig.20 voltage (RMS value) function frequency Tamb URdc
1999
Components
Product specification
Metallized polyester film capacitors
467/468 MKT/MKT
handbook, full pagewidth 467/468 voltage
CBA811
(lmax 12.5 (lmax 26.0 (lmax 30.0 (Hz)
Fig.21 voltage (RMS value) function frequency Tamb URdc
handbook, full pagewidth 467/468 voltage
CBA812
(lmax 12.5 (lmax 26.0 (lmax 30.0 (Hz)
Fig.22 voltage (RMS value) function frequency Tamb URdc
1999
Components
Product specification
Metallized polyester film capacitors
467/468 MKT/MKT
handbook, full pagewidth 467/468 voltage
CBA813
(lmax 12.5 (lmax 17.5 (lmax 26.0 (lmax 30.0
(Hz)
Fig.23 voltage (RMS value) function frequency Tamb URdc
handbook, full pagewidth 467/468 voltage
CBA814
(lmax 12.5 (lmax 17.5 (lmax 26.0 (lmax 30.0 (Hz)
Fig.24 voltage (RMS value) function frequency Tamb URdc
1999
Components
Product specification
Metallized polyester film capacitors
467/468 MKT/MKT
handbook, full pagewidth 467/468 voltage
CBA815
(lmax 12.5 (lmax 17.5 (lmax 26.0 (lmax 26.0 (lmax 30.0
(Hz)
Fig.25 voltage (RMS value) function frequency Tamb URdc
handbook, full pagewidth 467/468 voltage
CBA816
(lmax 12.5 (lmax 17.5 (lmax 26.0 (lmax 26.0 (lmax 30.0 (Hz)
Fig.26 voltage (RMS value) function frequency Tamb URdc
1999
Components
Product specification
Metallized polyester film capacitors
467/468 MKT/MKT
CBA817
handbook, full pagewidth MKT/MKT voltage
(Hz)
Fig.27 voltage (RMS value) function frequency Tamb URdc 1000
handbook, full pagewidth MKT/MKT voltage
CBA950
(Hz)
Fig.28 voltage (RMS value) function frequency Tamb URdc 1000
Maximum current (sinewave) function frequency maximum current defined maximum voltage depending ambient temperature Figs
1999
Components
Product specification
Metallized polyester film capacitors
Tangent loss angle
467/468 MKT/MKT
handbook, full pagewidth
CBA087
dissipation factor 10-4)
(Hz)
Fig.29 Tangent loss angle function frequency: typical curve.
Insulation resistance
CBA088
Tamb (°C)
Fig.30 product function ambient free temperature: typical curve.
1999
Components
Product specification
Metallized polyester film capacitors
467/468 MKT/MKT
Maximum allowed component temperature rise function ambient temperature (Tamb)
CBA821
handbook, full pagewidth
(°C)
Tamb (°C)
Fig.31 Maximum allowed component temperature rise function ambient temperature.
1999
Components
Product specification
Metallized polyester film capacitors
Heat conductivity function pitch capacitor body thickness mW/°C Table Heat conductivity bmax (mm) 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 11.0 11.0 12.0 12.0 ORIGINAL PITCH (mm) 22.5 12.0 13.0 13.0 15.0 15.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0
467/468 MKT/MKT
27.5 13.0 15.0 15.0 17.0 17.0 18.0 20.0 20.0 22.0 22.0 23.0 25.0 25.0 27.0 27.0 30.0 30.0 30.0 30.0 33.0 33.0 37.0 37.0
Power dissipation maximum component temperature rise power dissipation must limited order exceed maximum allowed component temperature rise function free ambient temperature. Power dissipation calculated accordance with Chapter "Introduction" section, "Maximum power dissipation". component temperature rise measured (see section "Measuring component temperature" more details) calculated component temperature rise (°C). power dissipation component (mW). heat conductivity component (mW/°C).
1999
Components
Product specification
Metallized polyester film capacitors
Measuring component temperature thermocouple must attached capacitor body Fig.32.
467/468 MKT/MKT
handbook, halfpage
thermocouple
CBA771
Fig.32 Mounting thermocouple.
temperature measured unloaded (Tamb) maximum loaded condition (Tc). temperature rise given avoid radiation convection, capacitor should tested wind-free box.
1999
Components
Product specification
Metallized polyester film capacitors
Application note limiting conditions
467/468 MKT/MKT
These capacitors suitable mains applications across-the-line capacitors without additional protection, described below. These mains applications strictly regulated safety standards therefore electromagnetic interference suppression capacitors conforming standards must used. select capacitor certain application, following conditions must checked: peak voltage (Up) shall greater than rated voltage (URdc). peak-to-peak voltage (Up-p) shall greater than maximum Up-p avoid ionisation inception level. voltage pulse slope (dU/dt) shall exceed rated voltage pulse slope RC-circuit rated voltage without ringing. pulse voltage lower than rated voltage, rated voltage pulse slope multiplied URdc divided applied voltage. other pulses following equation must fulfilled: rated
pulse duration. rated voltage pulse slope valid ambient temperatures higher temperatures derating factor shall applied. maximum component surface temperature rise must lower than limits Fig.31. Since circuits used voltages over peak-to-peak risk intrinsically active flammability after capacitor breakdown (short circuit) increases, recommended that power component limited times values mentioned Table When using these capacitors across-the-line capacitor input filter mains applications series connected with impedance mains applicant must guarantee that following conditions fulfilled case (spikes surge voltages from mains included): VOLTAGE CONDITIONS ABOVE ALLOWED VOLTAGES Maximum continuous voltage Maximum temporary -overvoltage (<24 hours) Maximum peak voltage (Vo-p) Tamb URac 1.25 URac URdc Tamb URac URac URdc
1999
Components
Product specification
Metallized polyester film capacitors
Example 3300 used voltage signal shown Fig.33. Up-p ambient temperature Checking conditions: peak voltage lower than (DC). peak-to-peak voltage lower than (AC) voltage pulse slope dU/dt V/500 0.16 This lower than V/µs (see specific reference data each version). dissipated power calculated with Fourier terms. temperature rise bmax pitch will This lower than temperature rise Fig.31. applicable. applicable.
467/468 MKT/MKT
voltage
handbook, full pagewidth
Up-p
time
CBA865
Fig.33 Voltage signal.
1999
Components
Product specification
Metallized polyester film capacitors
MARKING Product marking STYLE 467/468
handbook, halfpage
467/468 MKT/MKT
Capacitors with original pitch
capacitors marked black (see Fig.34) with following information: Capacitance code accordance with "IEC 60062" Tolerance rated capacitance: ±10%; Rated voltage (DC).
470n
CBA109
Fig.34 Example marking capacitor with original pitch
Capacitors with original pitch 22.5 27.5
capacitors marked black (see Fig.35) with following information: Manufacturer's symbol Capacitance code accordance with "IEC 60062" Tolerance rated capacitance: ±10%; Rated voltage (DC).
CBA110
handbook, halfpage
PHILIPS
820n
Fig.35 Example marking capacitor with original pitch 22.5 27.5
STYLE MKT/MKT capacitors marked black (see Fig.36) with following information: Capacitance code accordance with "IEC 60062" Tolerance rated capacitance: ±10%; Rated voltage (DC) Code dielectric material (MKT/MKT) Manufacturer's symbol.
handbook, halfpage
PHILIPS
180n 1000 MKT/MKT468
CBA651
Fig.36 Example marking.
1999
Components
Product specification
Metallized polyester film capacitors
Package marking package containing capacitors marked shown Fig.37.
467/468 MKT/MKT
Please note: time COMPONENTS will replace PHILIPS COMPONENTS
handbook, full pagewidth
Barcode label marking LINE MARKING EXPLANATION Manufacturer's name Country origin Sub-family Type description Capacitance value, tolerance, voltage climatic category ("IEC 60068-1") Batchnumber (only capacitors from PRC) Country origin: Belgium Preference origin code: Country origin code: (Belgium) Responsible production centre: Work order: Country origin: China Preference origin code: Country origin code: (PRC) Responsible production centre: Product type description Quantity production period, year week code Product code (12NC)
CCA338
Fig.37 Barcode label.
1999
Components
Product specification
Metallized polyester film capacitors
QUICK REFERENCE TEST REQUIREMENTS (see note TEST Robustness leads Tensile: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance soldering heat "IEC 60068-2-20" Resistance solvents Robustness component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" Climatic sequence heat: "IEC 60068-2-2" Damp heat cyclic, test first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" Damp heat cyclic, test remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" days; hours; hours; amplitude 0.75 acceleration m/s2; hours half sinewave; m/s2; load load solder bath: isopropyl alcohol; minutes PROCEDURE (quick reference)
467/468 MKT/MKT
REQUIREMENTS
visible damage legible marking 10-4; note
10-4; note
10-4; note Rins specified value
10-4; note Rins specified value 2000 hours: 1.25 URdc; URdc; 2000 hours; body temperature: bath temperature: dwell time: 10-4; note Rins specified value 10-4; note 10-4; note
Endurance (DC): "IEC 60384-2"
Heat storage: "IEC 60384-2" Resistance soldering heat with preheating: "IEC 60384-2" Notes
detailed information, "Type detail specification HQN-384-02/102". Measuring frequency kHz.
1999
Other recent searches
ZL60015 - ZL60015 ZL60015 Datasheet
ZL60015TBD - ZL60015TBD ZL60015TBD Datasheet
TN1053 - TN1053 TN1053 Datasheet
QM50HA-HB - QM50HA-HB QM50HA-HB Datasheet
FDS6690A - FDS6690A FDS6690A Datasheet
ADSP-21065L - ADSP-21065L ADSP-21065L Datasheet
ADSP-2106x - ADSP-2106x ADSP-2106x Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
