ASSP Screen Display Control CMOS On-Screen Display Controlle

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

ASSP Screen Display Control CMOS On-Screen Display Controlle

Datasheet Thumbnail

Top Searches for this datasheet

DS04-28827-1E
ASSP Screen Display Control
CMOS
On-Screen Display Controller
MB90098A
DESCRIPTION
FUJITSU MB90098A on-screen display controller designed with monitors, operates maximum clock frequency MHz, provides demultiplexed output (2-pixel parallel output) maximum display screen configuration characters rows, with maximum resolution dots character making MB90098A ideal with SVGA, XGA, SXGA etc. displays. variety display functions enabled including sprite characters, background characters, graphics functions etc.
FEATURES
Main screen display capacity Character configuration Maximum characters rows size dots dots size dots dots size dots dots sizes selected character values screen character types built
Character type
(Continued)
PACKAGE
28-pin plastic
(FPT-28P-M17)
MB90098A
(Continued) Display modes
Sprite character display (graphic display only) Screen background character Repeated pattern below main screen (Max. characters wide high) display (graphic display only) Only first characters used (code 000H 0FFH) colors each (set each character) Display color Character color/background color background/character border color colors each (set each row) colors (set each screen) Screen background color colors (set each dot) Graphic character color colors (set each screen) Shadow background border color Display position control Control 4-dot units (set each screen) Horizontal display start position Control 4-dot units (set each Vertical display start position screen) spacing control Control 2-dot units (set each row) Character/color signal output Choice straight output demultiplexed output DA3-DA0 (color signal) VOBA (OSD display period output signal) DB3-DB0 (color signal) VOBB (OSD display period output signal) Clock frequency Microcontroller interface 16-bit serial input signal input pins) Package SOP-28 Supply voltage +3.3
Normal/graphic characters (set each character) Border display (horizontal border (set each screen) /pattern background) Character background (set each character) (solid-fill/shaded) background (solid-fill/shaded) (set each row) Enlarged (standard, double height, (set each row) double width, double height width) Blinking Select blinking character, (set each character) period, duty ratio (set each screen) display block main screen (Max. characters wide high) Only first characters used (code 000H 0FFH)
MB90098A
ASSIGNMENT
(TOP VIEW)
SCLK DCLKI TCLKI HSYNC VSYNC DISP RESET TEST
VOBA DCLKO VOBB BUSY
(FPT-28P-M17)
MB90098A
DESCRIPTIONS
DCLKI DCLKO HSYNC VSYNC Input Output Input Input Circuit type clock input clock output Horizontal sync signal input pin. active level programmable. Vertical sync signal input pin. active level programmable. Display output control signal input pin. Input high level signal enable display output. Input level signal display output (DA3-0, VOBA, DB3-0, VOBB output) inactive level. active level programmable. Color signal output pins. straight output mode, all-dot signal output. demultiplexed output mode, even signal output. active level programmable. Display period signal output pin. straight output mode, alldot display period signal output. demultiplexed output mode, even display period signal output. active level programmable. Color signal output pins. demultiplexed output mode, signal output. straight output mode, output fixed inactive level. active level programmable. Display period signal output pin. demultiplexed output mode, display period signal output. straight output mode, output fixed inactive level. active level programmable. Busy signal output pin. During internal VRAM fill operation, internal command transfer, high level signal output. Chip select pin. During serial instruction transfer, level signal input. Serial data input pin. Shift clock input serial transfer. Reset signal input pin. Input level signal power-on. Test signal input pin. Input (fixed) high level signal during normal operation. +3.3 power supply pins. Ground pins Test clock input pin. Input (fixed) level signal during normal operation. Description
DISP
Input
Output
VOBA
Output
VOBB
Output
Output
BUSY SCLK RESET TEST TCLKI
Output Input Input Input Input Input Input
MB90098A
INPUT/OUTPUT CIRCUIT TYPES
Type Circuit diagram Remarks CMOS output
CMOS hysteresis input
CMOS hysteresis input with pull-up resistance (approx.
MB90098A
BLOCK DIAGRAM
DISP RESET VSYNC HSYNC SCLK Serial input control Display memory VRAM row) Font (512 fonts) display output control Display control EVEN display output control
VOBA
BUSY
Command transfer control
VOBB
Command Kbyte)
Clock
DCLKI
clock control
DCLKO
MB90098A
ABSOLUTE MAXIMUM RATINGS
(VSS Typ.) Parameter Power supply voltage Input voltage Output voltage Power consumption Operating temperature Storage temperature Symbol VOUT Tstg Rating Min. Max. +125 Unit Remarks
WARNING: Semiconductor devices permanently damaged application stress (voltage, current, temperature, etc.) excess absolute maximum ratings. exceed these ratings.
RECOMMENDED OPERATING CONDITIONS
(VSS Typ.) Parameter Power supply voltage level input voltage level input voltage Operating temperature Symbol Values Min. Max. Unit Remarks
WARNING: recommended operating conditions required order ensure normal operation semiconductor device. device's electrical characteristics warranted when device operated within these ranges. Always semiconductor devices within their recommended operating condition ranges. Operation outside these ranges adversely affect reliability could result device failure. warranty made with respect uses, operating conditions, combinations represented data sheet. Users considering application outside listed conditions advised contact their FUJITSU representatives beforehand.
MB90098A
ELECTRICAL CHARACTERISTICS
Characteristics
(VSS output pins output pins SIN, SCLK, RESET, TEST DCLKI HSYNC VSYNC DISP Conditions -8.0 Values Min. Typ. Max. Unit
Parameter level output voltage level output voltage
Symbol
Pull-up resistance
Input leak current
clock clock clock clock
-0.5
Power supply current
Input/Output Capacitance
Parameter Input pins Output pins Symbol COUT Measurement conditions MHz, Values Min. Max. Unit
MB90098A
Characteristics
characteristics measured under following conditions Measurement conditions VDD, VDD, VDD, Serial Input Timing
(VDD Symbol tCYC tWCH tWCL tCRC tCFC SCLK SCLK SCLK SCLK Values Min. Max. Unit Remarks
Parameter Shift clock cycle time Shift clock pulse width Shift clock signal rise-fall time Shift clock start time Data setup time Data hold time Chip select time Chip select signal rise-fall time
Serial input timing
tCFC tCRC tCYC
SCLK
tWCH tWCL
MB90098A
Vertical Synchronization, Horizontal Synchronization, Display Output Control Signal Input Timing (VDD Parameter Horizontal sync signal cycle time Horizontal sync signal pulse width Horizontal sync signal setup time Horizontal sync signal hold time Vertical sync signal setup time Vertical sync signal hold time Display output control signal setup time Display output control signal hold time Input sync signal rise-fall time Symbol tHCYC tDHST tDHHD tHVST tHVHD tDDST tDDHD HSYNC HSYNC HSYNC VSYNC DISP HSYNC VSYNC DISP Values Min. Max. Unit clock clock clock Remarks
During horizontal synchronization pulse width, MB90098A internal operations temporarily paused writing internal VRAM disabled. this reason necessary both horizontal synchronization signal pulse width VRAM write cycle that Horizontal sync signal pulse width VRAM write cycle Specifically, period between instructions should adjusted that instruction instruction (the VRAM write instruction) repeated during period horizontal sync signal pulse width. above condition satisfied, writing VRAM will executed normally. Horizontal synchronization signal, display output control signal input timing
DCLKI
tDHST
tDHHD
HSYNC
tDR, tDDST tDDHD
DISP
tDR,
MB90098A
Horizontal synchronization signal input
tHCYC
HSYNC
Vertical synchronization signal input timing VSYNC detection HSYNC leading-edge
HSYNC
tHVST
tHVHD
VSYNC
VSYNC detection HSYNC trailing edge
HSYNC
tHVST
tHVHD
VSYNC
MB90098A
Display Signal Timing
(VDD Symbol tDIFS tDIWHS tDIWLS tDIFD tDIWHD tDIWLD tDON tDOFF tPDCS tPDCD tPDIS1 tPDIS2 tPDOS1 tPDOS2 tPDID1 tPDID2 tPDOD1 tPDOD2 DCLKI DCLKI DCLKI DCLKI DA0, VOBA DB0, VOBB DCLKO DCLKO DA0, VOBA DB0, VOBB DA0, VOBA DB0, VOBB DA0, VOBA DB0, VOBB DA0, VOBA DB0, VOBB DA0, VOBA DB0, VOBB DA0, VOBA DB0, VOBB DA0, VOBA DB0, VOBB DA0, VOBA DB0, VOBB Values Min. Max. Unit clock Remarks
Parameter clock input cycle time (straight output) clock input pulse width (straight output) clock input cycle time (demultiplexed output) clock input pulse width (demultiplexed output) Display output control on/off delay time clock output delay time clock output delay time Display signal output delay time (straight output) Display signal output delay time (straight output) Display signal output delay time (straight output) Display signal output delay time (straight output) Display signal output delay time (demultiplexed output) Display signal output delay time (demultiplexed output) Display signal output delay time (demultiplexed output) Display signal output delay time (demultiplexed output)
maximum output frequency straight output MHz. maximum output frequency demultiplexed output MHz. continuous clock input signal without interruptions. Actual display output varies according control content, including display output control each display layer, display position control, etc.
MB90098A
Display output control timing
DCLKI
DISP
tDDST
tDON
tPDIXX
VOBA VOBB
tPDIXX represents tPDIS1, tPDIS2, tPDID1, tPDID2 depending operating mode.
Display output control timing
DCLKI
DISP
tDDST tDOFF tPDIXX
VOBA VOBB
tPDIXX represents tPDIS1, tPDIS2, tPDID1, tPDID2 depending operating mode.
MB90098A
Display signal output timing Straight output
tDIFS tDIWHS tDIWLD tPDCS tPDCS
DCLKI
tPDOS2
DCLKO
tPDOS1 tPDIS1
tPDIS2
VOBA VOBB
Demultiplexed output (single phase mode)
tDIFD tDIWHD tDIWLD tPDCD tPDCD tPDOD2
DCLKI
DCLKO
tPDOD1 tPDID1
tPDID2
VOBA VOBB
MB90098A
Display signal output timing Demultiplexed output phase mode)
tDIFD tDIWHD tDIWLD tPDCD tPDCD tPDOD2 tPDID2 tPDOD1 tPDID1
DCLKI
DCLKO
tPDOD1 tPDID1
VOBA
VOBB
tPDOD2 tPDID2
MB90098A
Reset Input Timing
(VDD Symbol tWRST tWRSD RESET DCLKI Values Min. Max. Unit clock Remarks
Parameter Reset pulse width Clock input
Reset input timing
tWRST
RESET
tWRSD
DCLKI
MB90098A
DISPLAY CONTROL COMMANDS Command List
Command
Command Code/Data Function VRAM write address setting Character data setting Character data setting control data setting control data setting Screen output control Screen output control Screen output control Vertical display position control Horizontal display position control Character vertical size control
15-12
5-00 5-03
0000
0001 0010
0011 0100 0101 0101 0101 0101 0101 0110
Shaded background 0110 frame color control Transparent color control Graphic color control Screen background character control Screen background character control Sprite character control Sprite character control 0110 0110 0111 0111 1000 1000
(Continued)
MB90098A
(Continued)
Command
Command Code/Data Function Sprite character control Sprite character control Synchronization control Input/output control Input/output control
15-12
11-0
1001 1001 1011 1011 1101 1101
11-2 clock control 13-0 13-1 14-0 14-1 14-2 14-3
CROM transfer start 1110 address CROM transfer start 1110 address CROM transfer address CROM transfer address 1110 1110
Note When reset signal input level signal input RESET pin) screen output control bits SDS, UDS, PDS, input/output control bits initialized "0." Other register bits VRAM contents undefined. After reset input/release completed, register bits except command transfer address settings (commands 14-0, 14-1, 14-2, 14-3) VRAM settings (character data control data)
MB90098A
Command Descriptions
Command (VRAM write address setting)
AY3-AY0 address (0H-FH) AX4-AX0 Column address (0H-1FH) VRAM fill Off, [Function] This command sets VRAM write address turns VRAM fill off. used make row/column address settings before setting character data (issuing commands make address settings before setting line control data (issuing commands VRAM fill activated executing character data setting (command [Additional information] normal write operation (writing character data control data) VRAM fill setting should "Off" VRAM write address settings entered using this command automatically incremented after each execution character data setting command (command (After last column address increment first column next row, after last column last address increment first column first row.) VRAM fill function function that sets same character data specified character data command setting (command character VRAM starting from column address specified command final (row final column (column VRAM fill function activated execution character data setting command (command During activation execution VRAM fill, BUSY outputs level signal. During VRAM fill execution, issue commands 1-4. (Caution) During control data setting (command column address (AX4-AX0) ignored. Also, address incremented automatically after control data setting. VRAM fill setting effective only during character data setting (command
MB90098A
Command (Character data setting)
MC3-MC0 Character color colors) MB3-MB0 Background color colors) MM1, Character background control Off) Solid fill) concaved shaded) convexed shaded) MS1, Character horizontal size control dots) dots) dots) Setting prohibited) [Function] This command sets character data. Settings entered VRAM reflected screen executing character data setting command (command [Additional information] Character color, character background color, character background control character horizontal size combination each character separately. Shadow effects combination top, bottom, left, right directions using combination character data setting (command control data setting (command bits. Shadow background frame color settings made shaded background frame color control (command 6-1)
MB90098A
Command (Character data setting
Shaded background succeeding character merge control merged with succeeding character) Merged with succeeding character) M8-M0 Character code Character/graphic character control Character, Graphic character) Blink control Off, [Function] This command writes character data character data setting command (command together with settings this command, VRAM address specified VRAM write address setting command (command After this command executed, VRAM write address automatically incremented. [Additional information] Setting blink control "On" (MBL causes display blink according setting screen output control (command 5-1) BT1, BT0, BD1, bits. shadow background right character combination control (MR) used only with characters which shadow background specified character data setting (command (MM1 (Caution) power-on, contents VRAM undefined. sure data before display started.
MB90098A
Command (Row control data setting
character vertical size type control Character vertical size Character vertical size LW2-LW0 spacing control (0-14 dots, 2-dot units) LF3-LF0 Border color colors) LFD, Border output control off) character background, character only border character background, solid fill character only border Border output LFB, Border control Border off) Right border) Left border) Left, right border) [Function] This function sets control data. Settings written VRAM reflected screen when control data setting command (command executed. [Additional information] character vertical size setting selected character vertical size type control (LHS) applies character vertical size type control setting (command 6-0) border format setting applies border format control setting (FM1, FM0) screen output control command (command 5-1)
MB90098A
Command (Row control data setting
character output control Off, LG1, enlargement control Normal) Double width) Double height) Double height width) Character background extention control Normal, Extended) Shadow background lower link control Separate, Lower link) LM1, background control Off) Solid display) Shadow concave) Shadow convex) L3-L0 background color colors) [Function] This command writes data control data setting command (command together with settings this command, VRAM address specified VRAM write address command (command [Additional Information] shadow background lower link control bit) applies character background shadow background shadow effects. (Caution) power-on, contents VRAM undefined. sure data before display started. After this command executed, VRAM write address automatically incremented. necessary VRAM write address (command each which control data set.
MB90098A
Command 5-00 (Screen output control
Sprite character output control Off, Screen background output control Off, Screen background character output control Off, Display output control (Character border character background background control) Off, [Function] This command controls screen display output. Command 5-03 (Screen output control
Demultplexed output synchronization control Internal HSYNC sychronization) DISP synchronization) Demultiplexed output timing control Synchronized timing clock) Synchronized timing clock) Demultiplexed output phase control Synchronized output) 2-phase output) Straight/demultiplexed output control Straight output) Demultiplexed output) [Function] This function controls screen display output. [Additional information] setting straight/demultiplexed output selection demultiplexed output (EOO display signal output parallel from DA3-0, VOBA pins DB3-0, VOBB pins. When demultiplexed output synchronization control selection "Internal HSYNC synchronization" (EOD horizontal sync operating edge selection determined horizontal sync operating edge setting bit) input/output control command (command 13-0)
MB90098A
Command (Screen output control
BT1, Blink period control BD1, Blink duty control always FM1, Border format control Side border dot) Side border dot) Pattern background Pattern background [Function] This function controls screen display output. [Additional Information] blink period control blink duty control settings apply control characters specified blink control (MBL character data setting command (command well sprite characters specified sprite character blink control (SBL sprite character control command (command 8-2) Command (Vertical display position control)
Y8-Y0 Vertical display position control (0-2044, 4-dot units) [Function] This function controls vertical display position screen. Command (Horizontal display position control)
X8-X0 Horizontal display position control (0-2044, 4-dot units) [Function] This function controls horizontal display position screen.
MB90098A
Command (Character vertical size control)
HB2-HB0 Character vertical size control (18-32 dots, 2-dot units) HA2-HA0 Character vertical size control (18-32 dots, 2-dot units) [Function] This function controls character vertical size settings. [Additional Information] main screen display allows selection between character sizes row. data command (command selection character size made character vertical size type control (LHS bit) This command used vertical display count both type Command (Shaded background frame color control)
BH3-BH0 Shadow background frame highlight color colors) BS3-BS0 Shadow background frame shadow color colors) [Function] This function controls shadow background border color. [Additional Information] shadow background border color determined shadow character background designation (MM1 character data setting command (command well shadow background designation (LM1 control data setting command (command shadow background border highlight color shadow color shown following areas Character background background Shadow background concave Shadow background frame highlight color Shadow background frame shadow color Lower edge, right edge Upper edge, left edge Shadow background convex Upper edge, left edge Lower edge, right edge Shadow background concave Lower edge Upper edge Shadow background convex Upper edge Lower edge
Command (Transparent color control)
Transparent color control Off, TC3-TC0 Transparent color code colors)
MB90098A
[Function] This function controls transparent color. [Additional Information] transparent color code (TC3-TC0) desired color code, transparent color control that display area specified color will rendered invisible. Areas specified color will output underlying layer display. Command (Graphic color control)
Graphic color border color replacement control Off, Graphic color character color replacement control Off, GF3-GF0 Border color replacement color code colors) GC3-GC0 Character color replacement color code colors) [Function] This function replaces specified color graphic characters with character color border color display. [Additional information] graphic character display color fixed registered font ROM. This command used replace specified graphic character display color with border color character color. desired color graphic character (specified GF3-GF0 bits) replaced border color (LF3-LF0) control data setting command (command desired color graphic character (specified GC3-GC0 bits) replaced character color (MC3-MC0) character data setting command (command graphic color border color replacement control transparent color control command 6-2) also graphic color border color replacement color code same transparent color code (TC3-0 command 6-2) border color replacement priority. graphic color border color replacement control transparent color control command 6-2) also border color border color replacement color code (LF3-LF0 command same transparent color code (TC3-0 command 6-2) color will transparent lower layer color will displayed. graphic color character color replacement control transparent color control command 6-2) also graphic color character color replacement color code same transparent color code (TC3-0 command 6-2) character color replacement priority. graphic color character color replacement control transparent color control command 6-2) also characterer color characterer color replacement color code (MC3-MC0 command same transparent color code (TC3-0 command 6-2) color will transparent lower layer color will displayed. graphic color character color replacement control graphic color border color replacement control character color replacement color code (GC3-GC0 bits) border color replacement color code (GF3-GF0 bits) should different colors. (Caution) This command applies only color main screen graphic characters. affect color sprite characters screen background character colors.
MB90098A
Command (Screen background character control
PD1, Screen background character configuration control character) characters horizontal) characters vertical) characters horizontal vertical) PM7-PM0 Screen background character code (000H 0FFH, types) [Function] This function controls screen background characters. [Additional Information] Screen background character control applied when screen background character output control turned (PDS screen output control command (command 5-00) vertical size screen background characters controlled setting screen background character vertical size control bits (PH2-PH0) screen background character control command (command 7-3) (Caution) Screen background characters displayed only graphic characters. screen background character code (PM7-PM0) only code settings from 000h 0FFh. screen background character graphic color cannot controlled graphic color control (command 6-3) graphic color border color replacement control graphic color character color replacement control. Command (Screen background character control
PH2-PH0 Screen background character vertical size control (18-32 dots 2-dot units) U3-U0 Screen background color colors) [Function] This function controls screen background characters screen background colors. [Additional Information] screen background color displayed setting screen output control (command 5-00) screen background output control (UDS Screen background characters displayed setting screen output control (command 5-00) screen background character output control (PDS
MB90098A
Command (Sprite character control
SD1, Sprite character configuration control character) characters horizontal) characters vertical) characters horizontal vertical) SM7-SM0 Sprite character code (000H 0FFH, types) [Function] This function controls sprite characters. [Additional Information] Sprite characters displayed setting screen output control (command 5-00) sprite character output control (SDS This will start sprite character display. sprite character display position determined setting sprite character control command (command 9-0) sprite character control command (command 9-1) vertical size sprite character display determined sprite character vertical size control bits (SH2-SH0) sprite character control command (command 8-2) sprite character blink control (SBL) turns sprite character blinking off. sprite character blink period duty controlled settings BT1, BT0, BD1, bits screen output control command (command 5-1) (Caution) Sprite characters only displayed graphic characters. sprite character code (PM7-PM0) only code settings from 000h 0FFh. sprite character graphic color cannot controlled graphic color control (command 6-3) graphic color border color replacement control graphic color character color replacement control. command (Sprite character control
Sprite character blink control Off, SH2-SH0 Sprite character vertical size control (18-32 dots, 2-dot units) [Function] This function controls sprite characters. [Additional Information] additional information under sprite character control (command 8-1)
MB90098A
Command (Sprite character control
Y9-SY0 Sprite character vertical display position control (0-2046, 2-dot units) [Function] This function controls sprite characters. [Additional Information] additional information under sprite character control (command 8-1) Command (Sprite character control
SX9-SX0 Sprite character horizontal display position control (0-2046, 2-dot units) [Function] This function controls sprite characters. [Additional Information] additional information under sprite character control (command 8-1) Command 11-0 (Synchronization control)
Vertical enlargement control Normal, Double) [Function] This function controls vertical enlargement synchronization system. [Additional information] vertical enlargement control (EG1) adjusts vertical display size controlling horizontal synchronization count. This control affects vertical size entire display, only display position. Command 11-2 (Dot Clock Control)
clock output control Off, [Function] This function controls clock output. [Additional information] internal clock signal output from DCLKO setting clock output control
MB90098A
Command 13-0 (Input/Output Control
HSYNC edge selection vertical sync detection Leading edge, Trailing edge) Edge selection horizontal sync operation Trailing edge, Leading edge) Display color signal output logic control Positive logic, Negative logic) Display output period signal output logic control Positive logic, Negative logic) [Function] This function controls input/output pins. [Additional Information] Vertical vibration phenomena avoided adjusting input phase timing vertical sync signal horizontal sync signal, using select HSYNC edge vertical sync detection. Command 13-1 (Input/Output Control
Horizontal sync signal input logic control Negative logic, Positive logic) Vertical sync signal input logic control Negative logic, Positive logic) Display period signal logic control Positive logic, Negative logic) [Function] This function controls input pins.
MB90098A
Command 14-0 (Command Transfer Start Address
TSD-TS8 Command transfer start address (Upper address values) [Function] This function sets command transfer start address [Additional Information] This function determines upper address value starting address command transfer. Command 14-1 (Command Transfer Start Address
TS7-TS1 Command transfer start address (Lower address value) [Function] This function sets command transfer start address [Additional Information] This function determines lower address value starting address command transfer. Command 14-2 (Command Transfer Address
TED-TE8 Command transfer address (Upper address values) [Function] This function sets command transfer address [Additional Information] This function determines upper address value ending address command transfer. Command 14-3 (Command Transfer Address
Command transfer sync control Asynchronous, Synchronous) -TE1 Command transfer address (Lower address value) [Function] This function sets command transfer address [Additional Information] This function determines lower address value ending address command transfer. When command transfer synchronization control (TSV command transfer activated executed synchronously with detection vertical sync signal. When command transfer synchronization control (TSV command transfer activated executed with issuance this command.
MB90098A
CONTENTS MB90098A-001 (STANDARD PRODUCT) FONT DATA
MB90098A
MB90098A
MB90098A
MB90098A
MB90098A
MB90098A
MB90098A
MB90098A
ORDERING INFORMATION
Part Number MB90098APF Package 28-pin plastic (FPT-28P-M17) Remarks
MB90098A
PACKAGE DIMENSION
28-pin plastic (FPT-28P-M17)
17.75 -0.20 .699 -.008
+0.25 +.010
Details part
Details part
0.35(.014) 11.80±0.30 (.465±.012) 8.60±0.20 (.339±.008) INDEX 0.20(.008) 0.18(.007) 0.68(.027)
0.15(.006)
0.20(.008)
0.18(.007) 0.68(.027)
1.27(.050)
0.45±0.10 (.018±.004)
0.13(.005)
0.15±0.05 (.006±.002)
2.80(.110)MAX (Mounting height)
0.10(.004) 16.51(.650) 0.80±0.20 (.031±.008) 10.20±0.30 (.402±.012)
0(0)MIN (STAND OFF)
2000 FUJITSU LIMITED F28048S-1C-2
Dimensions (inches)
MB90098A
FUJITSU LIMITED
further information please contact: Japan FUJITSU LIMITED Marketing Division Electronic Devices Shinjuku Dai-Ichi Seimei Bldg. 7-1, Nishishinjuku 2-chome, Shinjuku-ku, Tokyo 163-0721, Japan Tel: +81-3-5322-3353 Fax: +81-3-5322-3386 http://edevice.fujitsu.com/ North South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, Jose, 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. Fri.: (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, Lorong Chuan, Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmal.fujitsu.com/ Korea FUJITSU MICROELECTRONICS KOREA LTD. 1702 KOSMO TOWER, 1002 Daechi-Dong, Kangnam-Gu,Seoul 135-280 Korea Tel: +82-2-3484-7100 Fax: +82-2-3484-7111
Rights Reserved. contents this document subject change without notice. Customers advised consult with FUJITSU sales representatives before ordering. information circuit diagrams this document presented examples semiconductor device applications, intended incorporated devices actual use. Also, FUJITSU unable assume responsibility infringement patent rights other rights third parties arising from this information circuit diagrams. products described this document designed, manufactured contemplated general use, including without limitation, ordinary industrial use, general office use, personal use, household use, designed, developed manufactured contemplated accompanying fatal risks dangers that, unless extremely high safety secured, could have serious effect public, could lead directly death, personal injury, severe physical damage other loss (i.e., nuclear reaction control nuclear facility, aircraft flight control, traffic control, mass transport control, medical life support system, missile launch control weapon system), requiring extremely high reliability (i.e., submersible repeater artificial satellite). Please note that Fujitsu will liable against and/or third party claims damages arising connection with above-mentioned uses products. semiconductor devices have inherently certain rate failure. must protect against injury, damage loss from such failures incorporating safety design measures into your facility equipment such redundancy, fire protection, prevention over-current levels other abnormal operating conditions. products described this document represent goods technologies subject certain restrictions export under Foreign Exchange Foreign Trade Control Japan, prior authorization Japanese government should required export those products from Japan.
F0106 FUJITSU LIMITED Printed Japan

ASSP Screen Display Control CMOS On-Screen Display Controlle

Top Searches for this datasheet

Other recent searches