Download

PDF Abstract Text:

DS04-21713-1E

ASSP for Mobile Telephone

FUJITSU MEDIA DEVICE DATA SHEET
DS04-21713-1E
ASSP for Mobile Telephone
VCO (800 to 2500 MHz) VC-24 Series
s DESCRIPTION
s FEATURES
s PACKAGE
VC-24 Series
s PIN ASSIGNMENT
(TOP VIEW)
s PIN DESCRIPTION
Pin No. 1 2 3 4 5 6 7 8 Symbol Vt GND VCC OUT GND VSW GND GND Control voltage GND Power Supply Voltage Output GND Band select GND GND Description
s PRODUCT LINEUP (STANDARD MODELS)
VC-24 Series
s ELECTRICAL CHARACTERISTICS
1. For GSM / DCS (Tx) (Part number : VC-2R8A24-0897 / 1747S)
WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
· Band Selection Mode Band Width GSM DCS Selection Mode Band1 Band2 VSW (V) Min. 0.0 2.7 Max. 0.1 2.8 Center Frequency (MHz) 897 1747 Current Consumption (mA) Typ. 0.0 0.5
VC-24 Series
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
VC-24 Series
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
VC-24 Series
2. For GSM / DCS (Rx) (Part number : VC-2R8A24-1167 / 1617)
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
Higher harmonics Power supply variation Load variation Temperature drift 6
Hs Push Pull Td
VC-24 Series
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
VC-24 Series
3. For GSM / DCS (Rx) (Part number : VC-2R8A24-1202 / 1559P)
Higher harmonics Spurious Power supply variation Load variation
Hs SP Push Pull
VC-24 Series
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
Higher harmonics Spurious Power supply variation Load variation
Hs SP Push Pull
VC-24 Series
s MARKING
Part symbol
Lot number Logo
Trimming window Index
s PART NUMBER DESIGNATION
Numbers Specified by FUJITSU MEDIA DEVICE Center Frequency Series Name Outer Sheath Type Power Supply Voltage Product Category
Band 1 : 897 MHz Band 2 : 1747 MHz : VC-24 Series : SMD : 2.8 V : VCO
VC-24 Series
s PACKAGE DIMENSION
2.0 Max.
Dimensions in mm
s RECOMMENDED PATTERN FOR SOLDERING
VC-24 Series
s TAPING AND PACKAGING
(1) Carrier Tape and Packaging
Dimensions in mm
(2) Taping Layout
Feeder
150 mm 360 mm
Reel side
Direction of pulling
Rulling side
Empty 50mm or more
Marking of pin 1
Empty 400 mm or more
1000 packages
VC-24 Series
(3) Reel Shape and Dimensions
25.4 Max.
Label
Note : The label specifies the part number, quantity, and lot number.
Dimensions in mm
VC-24 Series
s REFLOW MOUNTING CONDITIONS (RECOMMENDED)
· Perform mounting using the temperature profile shown below. To prevent thermal stress to the VCO, ensure gentle temperature gradients and use preheating whenever possible. · Always consult FUJITSU MEDIA DEVICE beforehand if mounting more than once. · Never remove a VCO that has already been mounted and attempt to reuse. · For mounting, use a general-purpose flux suitable for mounting electronic components.
Temperature (°C)
Warm-up
Pre-heating Time (s)
Heating
Cooling
s WASHING CONDITIONS
· Washing solution: Use isopropyl alcohol. · Washing procedure: Immersion or steam cleaning is recommended. · Washing time: For immersion: Less than 5 minutes at 40°C or less. For steam: Less than 2 minutes at 90°C or less is recommended.
VC-24 Series
FUJITSU MEDIA DEVICES LIMITED
For further information please contact: Japan FUJITSU MEDIA DEVICE LIMITED International SalesMarketing DEPT. Shin-Yokohama Square Bldg., 14F, Shin-yokohama 2-3-12, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076
http://edevice.fujitsu.com / fmd /
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com / Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com / Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg /