67-21UWC/S400-XX/TR8 Fluorescence Type High Luminous Intensity Hi

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

67-21UWC/S400-XX/TR8 Fluorescence Type High Luminous Intensity Hi

Datasheet Thumbnail

Top Searches for this datasheet

Technical Data Sheet White Surface Mount Device
67-21UWC/S400-XX/TR8
Fluorescence Type High Luminous Intensity High Efficiency Emission Color:x=0.29,y=0.30
Descriptions
white which fabricated using blue phosphor, phosphor excited blue light emits yellow fluorescence. mixture blue light yellow light results white emission.
Applications
Equipment Backlighting Full Color Automotive Equipment Replacement Conventional Light Bulbs Fluorescent Lamps
Device Selection Guide
Chip Material InGaN Emitted Color White Lens Color Water Clear
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Package Dimensions
2.2±0.1
Polarity
2.4±0.1
reflow soldering (propose)
Notes: .All dimensions millimeters
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation Electrostatic Discharge Peak Forward Current (Duty 1/10 @1KHz) Parameter Symbol Symbol Topr Tstg Tsol Rating +100 (for seconds) Units
Electro-Optical Characteristics (Ta=25)
*Chip Rank Luminous Intensity Forward Voltage Reverse Current Viewing Angle Chromaticity Coordinates 21/2 -Min. -Typ. 3.50 -120 0.290 0.300 Max. -4.30 -IF=20mA VR=5V IF=20mA IF=20mA IF=20mA IF=20mA Units Condition
*67-21UWC/S400-XX/TR8 Chip Rank
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Color Ranks Rank 0.280 0.264 0.283 0.296 0.248 0.267 0.305 0.276 Rank 0.296 0.287 0.330 0.330 0.276 0.295 0.339 0.318 Rank 0.287 0.283 0.330 0.330 0.295 0.305 0.360 0.339 Rank 0.330 0.330 0.361 0.356 0.318 0.360 0.385 0.351
Chromaticity Diagram
*The C.I.E. 1931 chromaticity diagram Tolerance ±0.02).
verlight Electronics Co., Ltd. Device DSE-671-215 http://www.everlight.com ECN:03.08.2004 Rev. Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Typical Electro-Optical Characteristics Curves
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Label explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
Reel Dimensions
Note: tolerances unless mentioned ±0.1mm ,Unit
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Carrier Tape Dimensions: Loaded quantity 2000 reel.
Note: tolerances unless mentioned ±0.1mm ,Unit
Moisture Resistant Packaging
Label
Aluminum moistue-proof
Desiccant
Label
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Reliability Test Items Conditions
reliability products shall satisfied with items listed below. Confidence level90% LTPD10%
Items Reflow Soldering
Test Condition Temp. 260±5 Min. 5sec. +100 15min 15min +100 5min 5min Temp. Temp. 85%RH
Test Sample Ac/Re Hours/Cycles Size PCS.
Temperature Cycle
Cycles
PCS.
Thermal Shock High Temperature Storage Temperature Storage Operating Life High Temperature High Humidity
Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
PCS.
PCS. PCS. PCS. PCS.
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
Precautions
Over-current-proof Customer must apply resistors protection otherwise slight voltage shift will cause current change Burn will happen Storage open moisture proof before products ready use. Before opening package, LEDs should kept less 90%RH less. LEDs should used within year. After opening package, LEDs should kept less 70%RH less. LEDs should used within hours days) after opening package. moisture absorbent material (silica gel) faded away LEDs have exceeded storage time, baking treatment should performed using following conditions. Baking treatment 60±5 hours. Soldering Condition Pb-free solder temperature profile
Reflow soldering should done more than times. When soldering, stress LEDs during heating. After soldering, warp circuit board. 4.Soldering Iron Each terminal soldering iron temperature less than seconds within once less than soldering iron capacity 25W. Leave seconds more intervals, soldering each terminal. careful because damage product often started time hand solder.
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa
67-21UWC/S400-XX/TR8
5.Repairing Repair should done after LEDs have been soldered. When repairing unavoidable, double-head soldering iron should used below figure). should confirmed beforehand whether characteristics LEDs will will damaged repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: Lane Chung Yang Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
verlight Electronics Co., Ltd. Device DSE-671-215
http://www.everlight.com ECN:03.08.2004
Rev.
Page:
Prepared Teresa

67-21UWC/S400-XX/TR8 Fluorescence Type High Luminous Intensity Hi

Top Searches for this datasheet

Other recent searches