P-LCC-2 package. White package. Optical indicator. Colorless clear win

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

P-LCC-2 package. White package. Optical indicator. Colorless clear win

Datasheet Thumbnail

Top Searches for this datasheet

67-21SUGC/S400-XX/TR8
P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable vapor-phase reflow, Infrared reflow wave solder processes. Computable with automatic placement equipment. Available tape reel (8mm Tape). Pb-free
Descriptions
67-21 series available soft orange, green,blue yellow. package design, wide viewing angle optimized light coupling inter reflector. This feature makes ideal light pipe application. current requirement makes this device ideal portable equipment other application where power premium.
Applications
Automotive: backlighting dashboard switch. Telecommunication: indicator backlighting telephone fax. Flat backlight LCD, switch symbol. Light pipe application. General use. Device Selection Guide Chip Material InGaN Emitted Color Super Green Lens Color Water Clear
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:
67-21SUGC/S400-XX/TR8
Package Dimensions
2.2±0.1
Polarity
2.4±0.1
reflow soldering (propose)
Notes: .All dimensions millimeters
verlight Electronics Co., Ltd. Device DSE-671-213 http://www.everlight.com ECN:03.08.2004 Rev. Prepared by:Teresa Page:
67-21SUGC/S400-XX/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current(Duty 1/10 1KHZ) Symbol Topr Tstg Tsol Rating -40~ +100 (for second) Unit
Electro-Optical Characteristics (Ta=25)
Parameter Symbol *Chip Rank.
Luminous Intensity
Min.
Typ.
Max.
Unit
Condition
IF=20mA
Viewing Angle
21/2
-4.3
IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V
Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth
Forward Voltage
Reverse Current
*67-21SUGC/S400-XX/TR8
Chip Rank
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:
67-21SUGC/S400-XX/TR8
Typical Electro-Optical Characteristics Curves
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:
67-21SUGC/S400-XX/TR8
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: tolerances unless mentioned ±0.1mm ,Unit
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:
67-21SUGC/S400-XX/TR8
Carrier Tape Dimensions: Loaded quantity 2000 reel.
Note: tolerances unless mentioned ±0.1mm
Moisture Resistant Packaging
Label
Aluminum moistue-proof
Desiccant
Label
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:
67-21SUGC/S400-XX/TR8
Reliability Test Items Conditions
reliability products shall satisfied with items listed below. Confidence level90% LTPD10%
Items Reflow Soldering Temperature Cycle
Test Condition Temp. 260±5 Min. 5sec. +100 15min 15min +100 5min 5min Temp. Temp. 85%RH
Test Sample Ac/Re Hours/Cycles Size Cycles PCS. PCS.
Thermal Shock High Temperature Storage Temperature Storage Operating Life High Temperature High Humidity
Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
PCS. PCS. PCS. PCS. PCS.
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:
67-21SUGC/S400-XX/TR8
Precautions
Over-current-proof Customer must apply resistors protection otherwise slight voltage shift will cause current change Burn will happen Storage open moisture proof before products ready use. Before opening package, LEDs should kept less 90%RH less. LEDs should used within year. After opening package, LEDs should kept less 70%RH less. LEDs should used within hours days) after opening package. moisture absorbent material (silica gel) faded away LEDs have exceeded storage time, baking treatment should performed using following conditions. Baking treatment 60±5 hours. Soldering Condition Pb-free solder temperature profile
Reflow soldering should done more than times. When soldering, stress LEDs during heating. After soldering, warp circuit board. 4.Soldering Iron Each terminal soldering iron temperature less than seconds within once less than soldering iron capacity 25W. Leave seconds more intervals, soldering each terminal. careful because damage product often started time hand solder.
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:
67-21SUGC/S400-XX/TR8
5.Repairing Repair should done after LEDs have been soldered. When repairing unavoidable, double-head soldering iron should used below figure). should confirmed beforehand whether characteristics LEDs will will damaged repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: Lane Chung Yang Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
verlight Electronics Co., Ltd. Device DSE-671-213
http://www.everlight.com ECN:03.08.2004
Rev. Prepared by:Teresa
Page:

P-LCC-2 package. White package. Optical indicator. Colorless clear win

Top Searches for this datasheet

Other recent searches