Reference Type Collet Cable max. min. Part number

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Reference Type Collet Cable max. min. Part number

Datasheet Thumbnail

Top Searches for this datasheet

Collets
Reference Type
Collet
Cable
max. min.
Part number collet FFA.2C.752.DN FFA.2C.762.DN FFA.2C.772.DN FFA.2C.780.DN
Availability
Note: ordering collets separately. dimensions millimeters.
Accessories
Blanking caps fixed free receptacles
Part number
Dimensions (mm) 10.6
Availability
BRE.2G.200.NAS
Note: These caps suitable with alignment configuration. last letter part number stands material ring (silicone rubber). O-rings made from also available; required, replace letter
Body material: Nickel-plated brass Lanyard material: Stainless steel O-ring material: Silicone rubber
Maximum operating temperature: 392° Watertightness: IP61 according 60529
Blanking caps fixed receptacles
Part number BRF.2G.200.NAS
Dimensions (mm) 14.0
Availability
Note: This caps suitable with alignment configuration. last letter part number stands material ring (silicone rubber). O-rings made from also available; required, replace letter Body material: Nickel-plated brass Lanyard material: Stainless steel O-ring material: Silicone rubber Maximum operating temperature: 392° Watertightness: IP61 according 60529
sliding loop
bend relief
Part number FFM.2C.130.LC
Dimensions (mm) 12.2
Availability
Note: bend reliefs used with this section page 137. Material: Chrome-plated brass (0.3
Note: Other accessories also available. section page 129.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Tooling
Please consult section (page 129).
Panel cut-outs
Panel cut-outs
mini
drilling pattern
mini
15.1 +0.1
0.75
Note: Mounting torque 0.102
+0.1
LEMO 800-444-5366 www.lemousa.com
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Accessories
LEMO 800-444-5366 www.lemousa.com
Tooling
Accessories
FGG-EGG Insulators crimp contacts
male
female
Insulator part number AvailMale contact ability Female contact FGG.00.302.YL FGG.00.303.YL FGG.00.304.YL FGG.0B.302.YL FGG.0B.303.YL FGG.0B.304.YL FGG.0B.305.YL FGG.0B.306.YL FGG.0B.307.YL FGG.0B.309.YL FGG.1B.302.YL FGG.1B.303.YL FGG.1B.304.YL FGG.1B.305.YL FGG.1B.306.YL FGG.1B.307.YL FGG.1B.308.YL FGG.1B.310.YL FGG.1B.314.YL FGG.1B.316.YL FGG.2B.302.YL FGG.2B.303.YL FGG.2B.304.YL FGG.2B.305.YL FGG.2B.306.YL FGG.2B.307.YL FGG.2B.308.YL FGG.2B.310.YL FGG.2B.312.YL FGG.2B.314.YL FGG.2B.316.YL FGG.2B.318.YL FGG.2B.319.YL FGG.2B.326.YL FGG.2B.332.YL FGG.3B.302.YL FGG.3B.303.YL FGG.3B.304.YL FGG.3B.305.YL FGG.3B.306.YL FGG.3B.307.YL
Type
Availability
Type
Insulator part number AvailMale contact ability Female contact FGG.3B.308.YL FGG.3B.309.ML FGG.3B.310.YL FGG.3B.312.YL FGG.3B.314.YL FGG.3B.316.YL FGG.3B.318.YL FGG.3B.320.YL FGG.3B.322.YL FGG.3B.324.YL FGG.3B.326.YL FGG.3B.330.YL FGG.4B.304.YL FGG.4B.306.YL FGG.4B.307.YL FGG.4B.310.YL FGG.4B.312.YL FGG.4B.316.YL FGG.4B.320.YL FGG.4B.324.YL FGG.4B.330.YL FGG.4B.340.YL FGG.5B.304.ML FGG.5B.310.YL FGG.5B.314.YL FGG.5B.316.YL FGG.5B.320.YL FGG.5B.330.YL FGG.5B.340.YL FGG.5B.348.YL FGG.5B.350.ML FGG.5B.354.YL FGG.5B.364.YL
Availability
EGG.00.402.YL EGG.00.403.YL EGG.00.404.YL EGG.0B.402.YL EGG.0B.403.YL EGG.0B.404.YL EGG.0B.405.YL EGG.1B.402.YL EGG.1B.403.YL EGG.1B.404.YL EGG.1B.405.YL EGG.1B.406.YL EGG.1B.407.YL EGG.1B.408.YL EGG.2B.402.YL EGG.2B.403.YL EGG.2B.404.YL EGG.2B.405.YL EGG.2B.406.YL EGG.2B.407.YL EGG.2B.408.YL EGG.2B.410.YL EGG.2B.412.YL EGG.2B.414.YL EGG.2B.416.YL EGG.2B.418.YL EGG.2B.419.YL EGG.3B.402.YL EGG.3B.403.YL EGG.3B.404.YL EGG.3B.405.YL EGG.3B.406.YL EGG.3B.407.YL
EGG.3B.408.YL EGG.3B.409.ML EGG.3B.410.YL EGG.3B.412.YL EGG.3B.414.YL EGG.3B.416.YL EGG.3B.418.YL EGG.3B.420.YL EGG.3B.422.YL EGG.3B.424.YL EGG.3B.426.YL EGG.3B.430.YL EGG.4B.404.YL EGG.4B.406.YL EGG.4B.407.YL EGG.4B.410.YL EGG.4B.412.YL EGG.4B.416.YL EGG.4B.420.YL EGG.4B.424.YL EGG.4B.430.YL EGG.4B.440.YL EGG.5B.404.ML EGG.5B.410.YL EGG.5B.414.YL EGG.5B.416.YL EGG.5B.420.YL EGG.5B.430.YL EGG.5B.440.YL EGG.5B.448.YL EGG.5B.450.ML EGG.5B.454.YL EGG.5B.464.YL
Note: Each insulator used both crimp contacts normal shape (fig. with reduced solder cups (fig. shown page 131,132.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
FGG-EGG Crimp contacts
Fig.
Note:
next page additional style
(mm)
(mm)
Contact part number Male Availability
Types
Female EGG.00.654.ZZM EGG.00.654.ZZM EGG.00.654.ZZM EGG.0B.660.ZZM EGG.0B.655.ZZM EGG.0B.654.ZZM EGG.0B.660.ZZM EGG.1B.665.ZZM EGG.1B.660.ZZM EGG.1B.655.ZZM EGG.1B.654.ZZM EGG.1B.665.ZZM EGG.1B.660.ZZM EGG.2B.675.ZZM EGG.2B.670.ZZM EGG.2B.665.ZZM EGG.2B.665.ZZM EGG.2B.660.ZZM EGG.2B.655.ZZM EGG.2B.655.ZZM EGG.2B.654.ZZM EGG.2B.665.ZZM EGG.3B.680.ZZM EGG.3B.675.ZZM EGG.3B.670.ZZM EGG.3B.665.ZZM EGG.3B.660.ZZM EGG.3B.660.ZZM EGG.3B.655.ZZM EGG.3B.655.ZZM EGG.4B.680.ZZM EGG.4B.675.ZZM EGG.4B.670.ZZM EGG.4B.665.ZZM EGG.4B.660.ZZM EGG.4B.660.ZZM EGG.4B.655.ZZM EGG.5B.682.ZZM EGG.5B.680.ZZM EGG.5B.675.ZZM EGG.5B.670.ZZM EGG.5B.665.ZZM EGG.5B.660.ZZM
Availability
Data Subject Change
0.45 FGG.00.554.ZZC 0.45 FGG.00.554.ZZC 0.45 FGG.00.554.ZZC
302/303 1.10 FGG.0B.560.ZZC 304/305 0.80 FGG.0B.555.ZZC 306/307/309 0.45 FGG.0B.554.ZZC 302/303 304/305 306/307/308 310/314/316 304/305 306/307 308/310 312/314/316 318/319 326/332 303/304/309 305/306/307 308/309/310 312/314 316/318 320/322/324 326/330 306/307 316/320 324/330 314/316 330/340/348 350/354/364 1.10 FGG.0B.560.ZZC 1.40 1.10 0.80 0.45 FGG.1B.565.ZZC FGG.1B.560.ZZC FGG.1B.555.ZZC FGG.1B.554.ZZC
1.40 FGG.1B.565.ZZC 1.10 FGG.1B.560.ZZC 2.40 1.90 1.40 1.40 1.10 0.80 0.80 0.45 FGG.2B.575.ZZC FGG.2B.570.ZZC FGG.2B.565.ZZC FGG.2B.565.ZZC FGG.2B.560.ZZC FGG.2B.555.ZZC FGG.2B.555.ZZC FGG.2B.554.ZZC
1.40 FGG.2B.565.ZZC 2.90 2.40 1.90 1.40 1.10 1.10 0.80 0.80 2.90 2.40 1.90 1.40 1.10 1.10 0.80 4.00 2.90 2.40 1.90 1.40 1.10 FGG.3B.580.ZZC FGG.3B.575.ZZC FGG.3B.570.ZZC FGG.3B.565.ZZC FGG.3B.560.ZZC FGG.3B.560.ZZC FGG.3B.555.ZZC FGG.3B.555.ZZC FGG.4B.580.ZZC FGG.4B.575.ZZC FGG.4B.570.ZZC FGG.4B.565.ZZC FGG.4B.560.ZZC FGG.4B.560.ZZC FGG.4B.555.ZZC FGG.5B.582.ZZC FGG.5B.580.ZZC FGG.5B.575.ZZC FGG.5B.570.ZZC FGG.5B.565.ZZC FGG.5B.560.ZZC
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
LEMO 800-444-5366 www.lemousa.com
FGG-EGG Crimp contacts
Fig.
(mm)
(mm)
Contact part number Male Availability
Types
Female EGG.0B.661.ZZM EGG.0B.662.ZZM EGG.0B.656.ZZM EGG.0B.661.ZZM EGG.0B.662.ZZM EGG.1B.666.ZZM EGG.1B.661.ZZM EGG.1B.656.ZZM EGG.1B.666.ZZM EGG.1B.661.ZZM EGG.2B.676.ZZM EGG.2B.671.ZZM EGG.2B.666.ZZM EGG.2B.666.ZZM EGG.2B.667.ZZM EGG.2B.667.ZZM EGG.2B.661.ZZM EGG.2B.662.ZZM EGG.2B.656.ZZM EGG.2B.656.ZZM EGG.2B.666.ZZM EGG.2B.667.ZZM EGG.3B.676.ZZM EGG.3B.671.ZZM EGG.3B.666.ZZM EGG.3B.661.ZZM EGG.3B.661.ZZM EGG.3B.656.ZZM EGG.3B.656.ZZM EGG.4B.676.ZZM EGG.4B.671.ZZM EGG.4B.666.ZZM EGG.4B.661.ZZM EGG.4B.661.ZZM EGG.4B.656.ZZM EGG.5B.676.ZZM EGG.5B.671.ZZM EGG.5B.666.ZZM EGG.5B.661.ZZM
Availability
302/303 302/303 304/305
0.80 FGG.0B.561.ZZC 0.45 FGG.0B.562.ZZC 0.45 FGG.0B.556.ZZC 0.80 FGG.0B.561.ZZC 0.45 FGG.0B.562.ZZC
302/303 1.10 FGG.1B.566.ZZC 304/305 0.80 FGG.1B.561.ZZC 306/307/308 0.45 FGG.1B.556.ZZC 304/305 306/307 304/305 306/307 308/310 308/310 312/314/316 318/319 303/304/309 305/306/307 308/309/310 312/314 316/318 320/322/324 326/330 306/307 316/320 324/330 314/316 330/340/348 350/354/364 1.10 FGG.1B.566.ZZC 0.80 FGG.1B.561.ZZC 1.90 1.40 1.10 1.10 0.80 0.80 0.80 0.45 0.45 0.45 FGG.2B.576.ZZC FGG.2B.571.ZZC FGG.2B.566.ZZC FGG.2B.566.ZZC FGG.2B.567.ZZC FGG.2B.567.ZZC FGG.2B.561.ZZC FGG.2B.562.ZZC FGG.2B.556.ZZC FGG.2B.556.ZZC
1.10 FGG.2B.566.ZZC 0.80 FGG.2B.567.ZZC 1.90 1.40 1.10 0.80 0.80 0.45 0.45 1.90 1.40 1.10 0.80 0.80 0.45 1.90 1.40 1.10 0.80 FGG.3B.576.ZZC FGG.3B.571.ZZC FGG.3B.566.ZZC FGG.3B.561.ZZC FGG.3B.561.ZZC FGG.3B.556.ZZC FGG.3B.556.ZZC FGG.4B.576.ZZC FGG.4B.571.ZZC FGG.4B.566.ZZC FGG.4B.561.ZZC FGG.4B.561.ZZC FGG.4B.556.ZZC FGG.5B.576.ZZC FGG.5B.571.ZZC FGG.5B.566.ZZC FGG.5B.561.ZZC
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Plug caps
Part number
Series
Dimensions (mm) 10.0 12.2 13.8 15.0 18.5
Availability
BFG.00.100 PCSG BFG.0B.100.PCSG BFG.1B.100.PCSG BFG.2B.100.PCSG BFG.3B.100.PCSG
0S-0B 1S-1B 12.0 2S-2B 15.0 3S-3B 18.5
Body material: Polyoxymethylene (POM) grey black) Cord material: Polyamide white black) Gasket material: Silicone rubber Maximum operating temperature: 212° Watertightness: IP61 according 60529
Note: This available only with alignment (G). Upon request this supplied black last letter part number should replaced with
Fitting cord
Slide plug into loop cord. Place loop into groove front collet tighten loop.
Plug caps
Part number BFA.4S.100.NAS BFA.5S.100.NAS BFA.6S.100.NAS
Series
Dimensions (mm) 25.0 36.0 46.0 22.0 30.0 33.0
Availability
sliding loop
Note: last letter part number corresponds alignment plug. last letter part number stands material O-ring (silicone rubber). O-rings made from also available; required, replace letter Body material: Nickel-plated brass 3µm) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass polyolefin O-ring material: Silicone rubber Maximum operating temperature: 275°
Plug caps with
Part number BFG.4B.100.NAS BFG.5B.100.NAS
Series
Dimensions (mm) 25.0 36.0 20.0 27.0
Availability
sliding loop
Note: This available only with alignment (G). last letter part number corresponds alignment plug. last letter part number stands material O-ring (silicone rubber). O-rings made from also available; required, replace letter Body material: Nickel-plated brass 3µm) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass polyolefin O-ring material: Silicone rubber Maximum operating temperature: 275°
Data Subject Change
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
LEMO 800-444-5366 www.lemousa.com
Plug caps, fixing flange
Part number BHG.4B.100.NAS BHG.5B.100.NAS
Series
Dimensions (mm) 25.0 36.0 20.0 27.0
Availability
Body material: Nickel-plated brass 3µm) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass polyolefin O-ring material: Silicone rubber Maximum operating temperature: 275°
Note: This available only with alignment (G). last letter part number corresponds alignment plug. last letter part number stands material O-ring (silicone rubber). O-rings made from also available; required, replace letter
Blanking caps fixed receptacles free straight receptacles
Part number BRA.00.200.PCSG BRA.0B.200.PCSG BRA.1B.200.PCSG BRA.2B.200.PCSG
Series
Dimensions (mm)
Availability
10.0 0S-0B 10.0 12.5 11.0 1S-1B 14.0 17.0 13.5 2S-2B 18.0 21.0 14.5 2C-2G 3S-3B 22.0 25.5 17.0
BRA.3B.200.PCSG
Body material: Polyoxymethylene (POM) grey black) Cord material: Polyamide white black) Gasket material: Silicone rubber Maximum operating temperature: 212° Watertightness: IP61 according 60529
Note: These caps suitable with alignment configuration. request this supplied black. replace last letter part number
Blanking caps fixed free receptacles
Part number BRE.00.200.NAS BRE.0S.200.NAS BRE.1S.200.NAS BRE.2S.200.NAS BRE.3S.200.NAS BRE.4S.200.NAS BRE.5S.200.NAS BRE.6S.200.NAS Series 0S-0B 1S-1B 2S-2B 3S-3B 4S-4B 5S-5B Dimensions (mm) 10.5 11.0 12.0 14.0 20.0 22.0 22.0 Availability
10.5 12.5 14.0 18.0 23.0 10.0 30.0 12.0 30.0 12.0
Body material: Nickel-plated brass Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass polyolefin O-ring material: Silicone rubber Maximum operating temperature: 275° Watertightness: IP61 according 60529
Note: These caps suitable with alignment configuration. last letter part number stands O-ring material (silicone rubber). O-rings made from also available; required, replace letter
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Blanking caps free receptacles
Part number
Series 0S-0B 1S-1B 2S-2B 3S-3B
10.0 14.0 18.0 22.0
Dimensions (mm) 10.0 12.5 17.0 21.0 25.5 11.0 13.5 14.5 17.0
Availability
BRD.00.200.PCSG BRD.0B.200.PCSG BRD.1B.200.PCSG BRD.2B.200.PCSG BRD.3B.200.PCSG
Body material: Polyoxymethylene (POM) grey black) Cord material: Polyamide white black) Gasket material: Silicone rubber Maximum operating temperature: 212° Watertightness: IP61 according 60529
Note: request this available black. required, replace last letter part number
Fitting cord Slide receptacle into loop cord. Place loop into groove front collet nut. Tighten loop.
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Blanking caps free receptacles
Part number BRF.00.200.NAS BRF.0S.200.NAS BRF.1S.200.NAS BRF.2S.200.NAS BRF.3S.200.NAS BRF.4S.200.NAS BRF.5S.200.NAS BRF.6S.200.NAS
Series 0S-0B 1S-1B 2S-2B 3S-3B 4S-4B 5S-5B
Dimensions (mm) 10.5 10.5 11.0 12.0 14.0 20.0 22.0 22.0
Availability
sliding loop
12.5 14.0 18.0 23.0 10.0 30.0 12.0 30.0 12.0
Body material: Nickel-plated brass Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass polyolefin O-ring material: Silicone rubber Maximum operating temperature: 275° Watertightness: IP61 according 60529
Note: These caps suitable with alignment configuration. last letter part number stands O-ring material (silicone rubber). O-rings made from also available; required, replace letter
Spring loaded dust caps ERA, receptacles fixed receptacles
Part number BRR.0S.200.PZSG BRR.1S.200.PZSG
Series
Dimensions (mm)
Availability
0S-0B 11.0 13.3 15.3 1S-1B 14.2 17.1 12.0 20.3 2S-2B 18.6 22.4 15.2 26.2 2C-2G 3S-3B 22.5 26.5 18.2 30.8
BRR.2S.200.PZSG BRR.3S.200.PZSG
maxi
Note: request, this available black. replace last letter part number Spring material: Stainless steel Maximum operating temperature: 212° Watertightness: IP61 according 60529
Body material: Polyoxymethylene (POM) grey black) Gasket material: Silicone rubber
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Bend relief (Polyurethane) bend relief made from thermoplastic polyurethane elastomer (Desmopan 786) fitted over LEMO plugs receptacles that supplied with specially fitted nut. They available nine different colors that match with insulating washers (see page 140).
part numbers shown below order this accessory separately.
Main characteristics
Material: Polyurethane elastomer Temperature range atmosphere: Dimensions (mm) Bend relief Cable max. min. 10.0
-40° +176°
Part number fitting bend relief Availability
Part number GMA.00.012.DG GMA.00.018.DG GMB.00.025.DG GMB.00.028.DG GMB.00.032.DG GMD.00.025.DG GMD.00.028.DG GMD.00.032.DG GMA.0B.025.DG GMA.0B.030.DG GMA.0B.035.DG GMA.0B.040.DG GMA.0B.045.DG GMA.1B.025.DG GMA.1B.030.DG GMA.1B.035.DG GMA.1B.040.DG GMA.1B.045.DG GMA.1B.054.DG GMA.1B.065.DG GMA.2B.040.DG GMA.2B.045.DG GMA.2B.050.DG GMA.2B.060.DG GMA.2B.070.DG GMA.2B.080.DG GMA.3B.050.DG GMA.3B.070.DG GMA.3B.080.DG GMA.3B.090.DG GMA.4B.080.DG GMA.4B.010.DG GMA.4B.011.DG GMA.4B.012.DG GMA.4B.013.DG
Series
Note
FFM.00.130.LC1) FFM.00.131.LC
single contact connectors multicontact connectors
thin bend reliefs (for very flexible cables). FFM.0B.130.LC FFM.2B.132.LC FFM.0S.130.LC
only with connectors from series equipped with cable fixing type where bend relief from series used.
FFM.1B.130.LC FFM.3B.131.LC FFM.1S.130.LC
only with connectors from series equipped with cable fixing type where bend relief from series used.
FFM.2B.130.LC FFM.4B.132.LC FFM.2S.130.LC
1)For
only with connectors from series equipped with cable fixing type where bend relief from series used.
2C-2G
FFM.2C.130.LC FFM.3S.130.LC FFM.3B.130.LC FFM.4S.130.LC
FFM.4S.130.LC 10.0 10.9 10.0 11.0 11.9 11.0 FFM.4B.130.LC 12.0 13.0 12.0 13.5 14.5 13.5 Note: last letter part number indicates grey color bend relief. ordering bend relief with another color, table page replace letter letter required color. also detailed information each series: series page series page 110.
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Bend relief (Silicone) bend relief been designed connectors used applications high temperature requiring vapor sterilization. These bend reliefs different from previous ones; their material, silicone elastomer, noted retention flexibility over wide temperature range. They available nine colors. part numbers shown below order this accessory separately.
Main characteristics
Material: Silicone elastomer Temperature range atmosphere: -106° +392° Temperature range water steam: +284° Inflammability: flammable classification) Dimensions (mm) Bend relief Cable max. min.
Part number GMA.0B.025.RG GMA.0B.030.RG GMA.0B.035.RG GMA.0B.040.RG GMA.0B.045.RG GMA.1B.025.RG GMA.1B.030.RG GMA.1B.035.RG GMA.1B.040.RG GMA.1B.045.RG GMA.1B.051.RG GMA.1B.057.RG GMA.1B.063.RG GMA.2B.040.RG GMA.2B.045.RG GMA.2B.051.RG GMA.2B.057.RG GMA.2B.063.RG GMA.2B.071.RG GMA.2B.080.RG
Series
Part number fitting bend relief FFM.0B.130.LC FFM.2B.132.LC FFM.0S.130.LC
Note
only with connectors from series equipped with cable fixing type where bend relief from series used.
Availability
FFM.1B.130.LC FFM.3B.131.LC
only with connectors from series equipped witt cable fixing type where bend relief from series used.
1)For
FFM.1S.130.LC
FFM.2B.130.LC FFM.4B.132.LC FFM.2S.130.LC
only with connectors from series equipped with cable fixing type where bend relief from series used.
1)For
2C-2G
FFM.2C.130.LC
Note: last letter part number indicates grey color bend relief. ordering bend relief with another color, table this page replace letter letter required color. also detailed information each series: series page series page 110.
Note: selection pigments, which should remain stable high temperature, limited regulations. this reason, some colors will shade different from those used Desmopan bend reliefs. selected solutions represent best possible compromise.
Ref.
Color blue white grey yellow brown
Ref.
Color black orange green
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Overall protective covering with bend relief plugs receptacles Overall protective coverings with bend relief, type plugs receptacles offer optimum protection against mechanical damage give protection index IP65 according 60529 (mated position). These overall protective coverings with bend relief slide easily over connector shell positioned slightly pressing bend relief backnut. special design overall protective covering plugs provides easy push-pull self-latching system. Overall protective covering plug
Dimensions (mm) Overall protective covering Cable max. min.
Reference Model
Availability
Series 0S-0B 1S-1B 2S-2B
14.7 60.5 16.0 72.0 22.0 95.0
Material: Elastomere Operating temperature: -22° +248°
Overall protective covering free receptacle
Reference Model
Dimensions (mm) Overall protective covering Cable max. min.
Availability
Series 0S-0B 1S-1B 2S-2B
14.7 69.5 16.0 79.0 22.0 102.5
Material: Elastomere Operating temperature: -22° +248°
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Insulating washers Receptacles plugs mounted panels fitted with insulating washers. nine colors available combined with those overall protective coverings with bend relief makes color coding possible.
Part number GRA.00.269.GG GRA.0S.269.GG GRA.1S.269.GG GRA.2S.269.GG GRA.3S.269.GG GRA.4S.269.GG Series 0S-0B 1S-1B 2S-2B 3S-3B 4S-4B Dimensions (mm) 10.3 10.5 10.6 13.6 16.6 23.7 Availability
12.2 16.2 20.2 27.2
10.8 13.8 17.8 21.8 28.8
Note: Insulating washers series available request.
Caution: These insulating washers used with fixed straight receptacles with across flat dimension equivalent dimension washer. Ref. Color blue white grey yellow brown Ref. Color black orange green
maxi
Note: last letter part number indicates color grey insulating washer. obtain insulating washer another color, refer table above change letter part number corresponding letter color required. Material: Polyamide Maximum operating temperature: 194° panel cut-out, please consult page 150.
Double panel washers Double panel washers have been designed make drilling panel holes easier mounting fixed straight receptacles. combination nine different colors double panel washers overall protective coverings with bend relief makes color coding possible.
Part number Series Dimensions (mm) Availability
GRC.0S.260.HG 0S-0B 10.9 26.5 12.5 GRC.1B.260.HG 1S-1B 13.9 34.5 14.5 10.6
Caution: These double panel washers used with fixed free receptacles with across flat dimension equivalent dimension washer.
Ref.
Color blue white grey yellow brown
Ref.
Color black orange green
maxi
Note: last letter washer's part number indicates color grey. other colors, refer above table replace letter corresponding color required. panel cut-out, please consult chapter page 150.
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Material: Polyamide Maximum operating temperature: 194°
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Locking washers
Dimensions (mm) Availability 12.5 16.0 12.1 19.5 15.1 25.0 18.1 32.0 25.1
Part number
Series 0S-0B 1S-1B 2S-2B 2C-2G 3S-3B 4S-4B
GBA.00.250.FN GBA.0S.250.FN GBA.1S.250.FN GBA.2S.250.FN GBA.3S.250.FN GBA.4S.250.FN
Material: Nickel-plated bronze
Note: order this accessory separately, above part numbers.
Tapered washers
Part number GBB.00.250.LN GBB.0S.250.LN GBB.1S.250.LN GBB.2S.250.LN GBB.3S.250.LN GBB.4S.250.LN GBB.5S.250.LN
Series 0S-0B 1S-1B 2S-2B 2C-2G 3S-3B 4S-4B 5S-5B
Dimensions (mm) 12.1 15.1 18.1 25.2 35.2
Availability
Material: Nickel-plated brass
Note: Receptacles series always supplied with tapered washer. order this accessory separately, above part numbers.
Hexagonal nuts
Part number GEA.00.240.LN GEA.0S.240.LN GEA.0S.241.LN GEA.0E.240.LN GEA.1S.240.LN GEA.1E.240.LN GEA.2S.240.LN GEA.3S.240.LN GEA.4S.240.LN
Series 0S-0B 0S-0B 1S-1B 1S-1B 2S-2B 2S-2B 3S-3B 4S-4B
Dimensions (mm) 10.2 0.50 12.4 0.60 13.8 0.75 19.2 1.00 15.8 1.00 21.5 1.00 19.2 1.00 25.0 1.00 34.0 1.00
Availability
Material: Nickel-plated brass Natural anodized aluminium alloy Stainless steel
Note: order this part separately, above part numbers. last letters part number refer material treatment. aluminium alloy stainless steel desired, replace last letters part number respectively.
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Notched
Part number
Model
10.5 14.0 12.1 17.5 20.5
Dimensions (mm)
Availability
Model
GEG.00 240.LC GEG.0S.240.LC GEG.1S.240.LC GEG.1S.242.LC GEG.2S.240.LC GEG.2S.241.LC
Material: Chrome-plated brass Note: series fixed free receptacles back panel mounting always delivered with this notched nut. order this accessory separately, above part numbers.
Model
Conical nuts
Dimensions (mm) 10.0 12.0 16.0 20.0 14.0 20.0 24.0 24.0 30.0 41.0 Availability
Part number GEC.00 240.LC GEC.0S.240.LC GEC.1S.240.LC GEC.1S.241.LC GEC.1S.242.LC GEC.2S.240.LC GEC.2S.241.LC GEC.3S.240.LC GEC.4S.240.LC GEC.5S.240.LC
Material: Chrome-plated brass Note: series fixed free receptacles back panel mounting always delivered with conical nut. order this accessory separately, part numbers adjacent table.
Round nuts
Part number GEB.00.240.LN GEB.0S.240.LN GEB.0E.240.LN GEB.1S.240.LN GEB.1E.240.LN GEB.2S.240.LN GEB.2B.240.LN GEB.3S.240.LN GEB.4S.240.LN GEB.5S.240.LN GEB.5E.240.LN GEB.6S.241.LN GEB.6E.240.LN
Model
Dimensions (mm) 11.0 18.0 14.0 20.0 18.0 17.5 22.0 28.0 40.0 54.0 54.0 65.0 0.50 0.60 1.00 1.00 1.00 1.00 0.75 1.00 1.00 1.00 1.50 1.50 2.00
Availability
Model
Model Material: Nickel-plated brass
Note: series receptacles always supplied with model round nuts. order this accessory separately, part numbers above table.
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Grounding
Part number GCA.00.255.LT GCA.0S.255.LT GCA.1S.255.LT GCA.2S.255.LT GCA.3S.255.LT GCA.4S.255.LT GCA.5S.255.LT
Series 0S-0B 1S-1B 2S-2B 3S-3B 4S-4B 5S-5B
Dimensions (mm) 13.0 12.2 15.2 18.2 25.6 35.1 18.2 22.0 27.5 32.0 39.0 50.0 57.5
Availability
Material: CuSnZn plated brass
Lead-through with cable collet
Part number GSC.1S.290.ND42 GSC.1S.290.ND52 GSC.1S.290.ND62 GSC.1S.290.ND72 GSC.1S.290.ND76
Cable (mm) max. min.
Availability
Note: cable collet system stands both screened unscreened cables. delivered with fitting bend relief part number.
12.5
maxi
Standard, typically weeks delivery quantities less. Non-standard product, contact LEMO USA, typically 6-12 weeks delivery quantities less. Non-standard product defined product which contains more components which standard.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Tooling
Wrench hexagonal nuts
Part number DCG.91.149.0TN DCG.91.161.1TN DCG.91.201.4TN DCG.91.231.7TN DCG.91.282.2TN
Dimensions (mm)
Part number GEA.00.240.LN GEA.0S.240.LN GEA.1S.240.LN GEA.2S.240.LN GEA.3S.240.LN
Material: blackened steel
Wrench hexagonal nuts, with alignment receptacles flats
Dimensions (mm) Part number GEA.00.240.LN GEA.0S.240.LN GEA.1S.240.LN GEA.2S.240.LN GEA.3S.240.LN
Part number
maxi
DCA.91.149.0TN DCA.91.161.1TN DCA.91.201.4TN DCA.91.231.7TN DCA.91.282.2TN
Material: blackened steel
Spanner type wrench model round nuts
Part number DCB.91.119.0TN DCB.91.131.1TN DCB.91.161.4TN DCB.91.201.8TN DCB.91.242.2TN
Dimensions (mm)
Part number GEB.00.240.LN GEB.0S.240.LN GEB.1S.240.LN GEB.2S.240.LN GEB.3S.240.LN
Material: blackened steel
Wrench conical
Part number DCH.91.101.PA DCH.91.121.PA DCH.91.161.PA DCH.91.201.PA
Dimensions (mm) 10.1 12.1 16.1 20.1 12.8 14.8 21.0 22.8 48.3 49.3 51.9 53.5
Part number GEC.00.240.LC GEC.0S.240.LC GEC.1S.240.LC GEC.2S.240.LC
Material: Dark grey polyurethane
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Flat wrench collet
Part number DCP.99.045.TC DCP.99.050.TC DCP.99.055.TC DCP.99.060.TC
Dimensions (mm) 10.5 12.6 12.6 12.6
Material: chrome-plated steel
Wrench notched nuts
Part number DCH.91.101.PA DCH.91.121.PA DCH.91.181.PA DCH.91.161.PA DCH.91.201.PA DCH.91.141.PA DCH.91.201.PA DCH.91.241.PA DCH.91.251.PA
Dimensions (mm) 10.1 12.1 18.1 16.1 20.1 14.1 20.1 24.1 25.1 12.8 14.8 22.8 21.0 22.8 18.6 22.8 30.8 32.8 48.3 49.3 53.1 51.2 53.5 51.2 53.5 52.6 55.5
Part number GEG.00.240.LC GEG.0S.240.LC GEG.0E.240.LC GEG.1S.240.LC GEG.1E.240.LC GEG.1S.242.LC GEG.2S.240.LC GEG.2S.241.LC GEG.2E.240.LC
Material: Blue polyurethane
Wrench tightening backnut
Part number DCP.91.001.TN DCP.91.023.TN
Series
Dimensions (mm) 10.1 13.1 15.1 21.2 31.2
12.1 14.1 20.2 30.2
DCP.91.045.TN
Material: blackened steel
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Wrench whish secures straight plug with latching tabs while tightening collet
Part number DCL.91.105.0TK DCL.91.127.0TK DCL.91.149.0TK
Series
Dimensions (mm) 13.5 17.0 19.0
Material: blackened steel
Wrench which secures straight plug with three latching tabs while tightening collet
Series 2S-2C Dimensions (mm)
Part number DCN.91.905.0TK DCN.91.125.0TK DCN.91.149.0TK DCN.91.171.2TK DCN.91.201.5TK
Material: blackened steel
Assembly tool FVB.00.303.NLA plugs
Part number DCL.91.516.5TK
Series
Dim. (mm)
Taps
Part number DTA.99.700.5Z DTA.99.900.6Z
Series 0S-0B
Thread
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Crimp Tooling Crimp contacts
Fig.
Manual crimping tools
Part number Supplier Fig. LEMO DANIELS BALMAR BUCHANAN
contact 0.5-0.7 0.9-1.3 (Fig. DPC.91.701.V1) MH8601) 23-000 6163361)
contact 1.6-2.0 (Fig. DPC.91.101.A2) AF82) 55-000 6157082)
contact 3.0-4.0 (Fig. DPC.91.102.V M300BT 55-000 615708
According specification MIL-C-22520/7-01. According specification MIL-C-22520/1-01.
Pneumatic crimping tools
Supplier LEMO BALMAR BUCHANAN Part number DPC.91.701.C 85230 621101
According specification MIL-C-22520/7-01. LEMO contacts 0.5-0.7-0.9-1.3
Positioners crimp contacts 0.5-0.7-0.9
Connector Contact Type 3021) Fig. Conductor 28-30-32 20-22-24 22-24-26 28-30-32 22-24-26 28-30-32 28-30-32 18-20 20-22-24 20-22-24 22-24-26 22-24-26 28-30-32 28-30-32 18-20 20-22-24 22-24-26 20-22-24 22-24-26 28-30-32 22-24-26 DCE.91.072.BVC 28-30-32 28-30-32 DCE.91.052.BVC DCE.91.052.BVM DCE.91.072.BVM Positioners part number male contact DCE.91.050.0VC female contact DCE.91.050.0VM
male female
These positioners suitable with both manual pneumatic crimping tools according MIL-C-22520/701 standard. Fig.
0.45 1.10 0.80 0.45 0.80 0.45
304/305
DCE.91.090.BVC DCE.91.090.AVC DCE.91.070.BVC DCE.91.050.BVC DCE.91.131.BVC DCE.91.091.BVC DCE.91.071.BVC DCE.91.051.BVC DCE.91.132.BVC
DCE.91.090.BVM DCE.91.090.AVM DCE.91.070.BVM DCE.91.050.BVM DCE.91.131.BVM DCE.91.091.BVM DCE.91.071.BVM DCE.91.051.BVM DCE.91.132.BVM
306/307 0.45
Fig.
3041) 306/307 3021)
1.40 1.10 1.10 0.80 0.80 0.45
310/314 0.45
Note: wide variation strand number diameter combinations quoted being AWG, some which have large enough cross section guarantee crimp either MIL-C-22520/1-01 /7-01. technical department your disposal study propose solution your applications.
304/305 1.40 1.10 3061) 0.80 1.10 308/310 0.80 0.45 312/314 0.80 316/318 0.45 326/332 0.45 Note:
DCE.91.132.CVC DCE.91.132.CVM DCE.91.092.BVC DCE.91.092.AVC DCE.91.092.BVM DCE.91.092.AVM
Only these types available series.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Positioners crimp contacts 0.5-0.7-0.9 diameter
Connector Contact Type Fig. Conductor 18-20 20-22-24 20-22-24 22-24-26 22-24-26 DCE.91.073.BVC 28-30-32 18-20 20-22-24 20-22-24 22-24-26 22-24-26 28-30-32 18-20 20-22-24 20-22-24 22-24-26 DCE.91.134.BVC DCE.91.094.BVC DCE.91.074.BVC DCE.91.135.BVC DCE.91.095.BVC DCE.91.134.BVM DCE.91.094.BVM DCE.91.074.BVM DCE.91.135.BVM DCE.91.095.BVM DCE.91.073.BVM Positioners part number male contact DCE.91.133.BVC DCE.91.093.BVC female contact DCE.91.133.BVM DCE.91.093.BVM
male
female
These positioners suitable with both manual pneumatic crimping tools according MIL-C-22520/701 standard.
308/309 1.40 1.10 312/314 1.10 316/318 0.80
320/322 0.80 324/326 328/330 0.45
316/320 324/330
1.40 1.10 1.10 0.80 0.80 0.45
330/340 1.40 1.10 350/354 1.10 0.80
Turret crimp contacts 1.6-2.0-3.0 diameter
Connector Contact Type Note: These turrets used with manual crimping tool according MIL-C-22520/1-01 standard. Fig. Conductor 12-14-16 14-16-18 14-16-18 18-20-22 10-12-14 12-14-16 14-16-18 14-16-18 18-20-22 10-12-14 12-14-16 14-16-18 14-16-18 18-20-22 8-10-12 10-12-14 12-14-16 14-16-18 14-16-18 18-20-22 Positioners Part number DCE.91.202.BVCM DCE.91.162.BVCM DCE.91.303.BVCM DCE.91.203.BVCM DCE.91.163.BVCM DCE.91.304.BVCM DCE.91.204.BVCM DCE.91.164.BVCM DCE.91.405.BVCM DCE.91.305.BVCM DCE.91.205.BVCM DCE.91.165.BVCM
303/304 305/306 306/307 314/316
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Extraction tools crimp contacts
Connector Type Contact Extractors Part number
302/303/304 302/303 304/305 306/307/309 302/303 304/305 306/307/308 310/314/316 304/305/306/307 308/310 312/314/316/318/319 326/332 303/304/309 305/306/307 308/309/310 312/314/316/318 320/322/324/326/330 306/307 316/320/324/330 314/316 330/340/348 350/354/364
DCF.91.050.2LT DCF.91.090.2LT DCF.91.070.2LT DCF.91.050.2LT DCF.91.131.2LT DCF.91.090.2LT DCF.91.070.2LT DCF.91.050.2LT DCF.91.202.2LT DCF.91.162.2LT DCF.91.131.2LT DCF.91.090.2LT DCF.91.070.2LT DCF.91.050.2LT DCF.91.303.5LT DCF.91.203.5LT DCF.91.163.5LT DCF.91.133.5LT DCF.91.093.5LT DCF.91.073.5LT DCF.91.303.5LT DCF.91.203.5LT DCF.91.163.5LT DCF.91.133.5LT DCF.91.093.5LT DCF.91.073.5LT DCF.91.405.5LT DCF.91.303.5LT DCF.91.203.5LT DCF.91.163.5LT DCF.91.133.5LT DCF.91.093.5LT
Note: This model used male female contacts.
Retention testing tools crimp contacts 0.5-0.7-0.9 diameter
Contact
Test force
Testing tool part number male contact DCK.91.050.8LRC DCK.91.071.4LRC DCK.91.091.4LRC DCK.91.132.5LRC female contact DCK.91.050.8LRM DCK.91.071.4LRM DCK.91.091.4LRM DCK.91.132.5LRM
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Panel Cut-Outs
P1-P3-P4-P9
mini
P2-P5-P10-P11
mini
P6-P7
120°
series
Series 12.1 15.1 18.2 25.2 35.21) 10.6 13.6 16.6 23.6 33.6 12.1 15.1 18.2 25.2 35.2 10.6 13.6 16.6 23.6 33.6 11.1
12.5 11.5 14.5 13.5 14.1 12.6 20.1 10.1 15.0 8.30 10.5 18.5 16.1 14.6 14.1 12.6 21.0 11.17 14.0 22.5 19.2 17.1 16.1 15.1 23.0 13.95 18.0 27.0 20.2 18.6 29.5 36.0 25.2 23.6 36.1 44.0 35.2 33.6 47.1 35.2
35.2
Note: using tapered washer round hole apply. tolerance: 0.02
Cut-out types
Model Note:
Mounting torque
Model Type P1/P2 P2/P10 P1/P10 Model Type Model Type P4/P93)
Type
Model
Type
Series
Torque (Nm) Metal shell Plastic shell4) 12.0 17.0
series
Note:
These values apply when metal shell mounted with insulating washer.
series
Series 12.1 15.1 18.2 25.2 35.21) 48.3 10.6 13.6 16.6 23.6 33.6 45.6 12.5 14.5 18.5 22.5 27.0 36.0 44.0 58.0 12.1 15.1 18.2 25.2 35.2 48.3 11.5 13.5 19.0 21.5 27.0 34.0 44.0 58.0 12.1 14.1 16.1 20.2 25.2 35.2 48.3 10.6 12.6 14.6 18.6 23.6 33.6 45.6 20.0 21.0 22.0 30.0 36.0 47.0 60.0 10.1 12.1 16.1 20.2 25.2 35.2 48.3 10.6 15.1 18.6 23.6 33.6 45.6
11.92 15.5 12.1 12.7 11.1 12.4 11.1 15.1 15.5 18.2 18.0 35.2 36.8
12.1
Note: using tapered washer round hole apply. tolerance: 0.02
Cut-out types
Model Type P2/P1 Model Type Model Type P2/P10 Model Type P1/P23) P34) Model Type P1/P25)
Mounting torque
Series Torque (Nm) Metal shell Plastic shell6)
Note: series only series. series
Data Subject Change
12.0 17.0 0.102 22.0 Note: These values apply when metal shell mounted with insulating washer.
LEMO 800-444-5366 www.lemousa.com
Panel cut-out mounting with insulating washer double panel washer (B-S series)
Series 0S-0B 1S-1B
Dimensions (mm) 13.5 17.0
mini
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Drilling Patterns
Fixed receptacle with straight printed circuit contact series)
Series Series
Series
Dimensions Dimensions Dimensions
Dimensions 1.35 2.30 3.00 4.60 5.60 Dimensions
120° 120° 120° 120° 120°
Series Series
Series
Dimensions
Series
Dimensions Dimensions
Series
Dimensions
51°26'
Series
Series
Dimensions
Series
Dimensions
Series
Dimensions
Series
Dimensions
3.95 22°30' 1.40 6.20 22°30' 2.15 7.90 22°30' 2.80
6.50 22°30' 2.80 8.20 22°30' 3.40
Series
Dimensions
Series
Dimensions
1.90 1.80 2.65 2.65 3.40 3.40
10.5
32°44' 16°22' 2.00 32°44' 16°22' 3.10 32°44' 16°22' 3.86 32°44' 16°22' 5.00
Series
Dimensions
3.50 4.34
Note: views from side receptacle.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Series
Dimensions
Series
Dimensions
8.62 51°26' 27°42' 4.78 11.00 51°26' 27°42' 6.00
25°43' 22°30'
Series
Dimensions
2B.326
3B.326
25°43'
25°43'
13.73 8.36
25°43' 5.30 11.1 25°43' 6.65
3B.330
4B.330
22°30'
4B.340
22°30'
5B.350
11.64
11.4
4.24
7.94
15°40
5B.354
5B.364
13°5
22°30'
14.96
14.2
19.4
27°41'32''
Length straight printed circuit contacts (for receptacle
Type 302/303 304/305 306/307 302/303/304/305 306/307/308 310/314/316 303/304/305/306/307/308/310 312/314/316/318/319 303/304/308/309/310 312/314/316/318 320/322/324/326/328/330 316/320 324/330 Dimensions
10.08
19.84
5.05
Length straight printed circuit contacts (for receptacle EZG/EYG/XPF)
Type 302/303 304/305 306/307 302/303/304/305 306/307/308 310/314/316 303/304/305/306/307/308/310 312/314/316/318/319 Models EZG/EYG 0.5/0.8 3/4.3
EZG/EYG/XPF
Note: This table does apply receptacle receptacle plug
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
19.2
27°4
Fixed receptacle printed circuit series) Holes fixing housing:
EYG-EZG
Series
Dimensions 0.81) 1.72) 1.72) 1.72) 5.08 7.62 7.62 10.16
XPF.0B
Series
Dimensions 5.08
Note: solder.
screw.
Fixed receptacle with elbow printed circuit contact series)
Series
Dim.
2.54
Series
Dim. 1.27 1.27 2.54
Series
Dim. 2.54 2.54 3.50
2.54
2.54
0B.305
1B.305
2B.305
1B.306
2.54 2.54
1.27
1.27
2.54 2.54
2.54 2.54
2.54 2.54
1.27
2.54 2.54
2B.306
1B.307
2B.307
1B.308
1.27
1.27
1.27
2.54 2.54
2.54 2.54
2.54 2.54
0.92
2.54 2.54
2B.308
2B.310
3B.312
2.54 2.54 2.54
2B.314
2.54
1.27
2.54 2.54
2.54 2.54 2.54 2.54 2.54 2.54
1.27
2.54 2.54 2.54 2.54
3B.314
3B.316
2B.318
3B.318
1.27
1.27
1.27
2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54
1.27
1.27
2.54
5.08
2.54
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
2.54 2.54
2B.319
3B.320
3B.324
3B.330
1.27
1.27 1.27
1.27
1.27
2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54
Elbow receptacle (90°) printed circuit series)
EPG.00.302 XBG.00.302 XRB.00.3021)
5.08 2.54
EPG.00.304 XBG.00.304 XRB.00.3041)
5.08 2.54
EPG.00.303 XBG.00.303 XRB.00.3031)
5.08
2.54
0.63
0.63
EPG-EXG Solder mount
2.54 7.62 1.27
EPG-EXG Screw mount
2.54 7.62 1.27
EPG.1B.314
12.7 1.27 12.7 2.54 1.27
2.54
7.62
2.54
2.54
Note: XRB.00 series, holes shell fixing different (see 41).
Fixed receptacle with straight printed circuit contact series)
Series
Dimensions
2.54
1.27
1.27
7.62
Series
Dimensions Dimensions
Series
Dimensions Dimensions
Series
Series
Series
Dimensions 22°30' 2.75 22°30' 3.25
3.25 3.90
Note: views from side receptacle.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Series
Dimensions
22°30' 22°30'
Series
Dimensions
3S.312
3S.313
3S.314
22°30' 1.25 22°30' 1.50
3S.316
3S.318
Length straight printed circuit contacts (for receptacle
Type 303/304/305 305/306 303/304/305 306/307 307/308/310 305/306/307/308/310 312/313/314 316/318
Dimensions
Note: This table does apply receptacles plugs. Note: dimensions millimeters.
Elbow receptacle (90°) printed circuit series)
Solder mount
2.54 7.62
Screw mount
2.54 7.62
EPL.0S.116
5.08
2.54
2.54
7.62
7.62
2.54
2.54
2.54
2.54
2.54
2.54
2.54
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Fixed receptacle with elbow printed circuit contact series)
Series
Dim.
2.54
Series
Dimensions 2.00 2.48 1.00 1.24
Series
Dimensions 2.00 3.50 3.50
2.54
2.54
1S.305
2.54 2.54
1S.306
2S.306
2S.307
2.54 2.54
1.27
2.54
2.54
2.54 2.54
2S.308
3S.310
3S.312
3S.314
1.25
1.75
1.75
2.54 2.54 2.54
2.54 2.54 2.54
2.54 2.54 2.54
2.54 2.54 2.54
3S.316
2.54 2.54 2.54
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Cable fixing
Cables fixed into LEMO connectors with cable collet systems. These collets with latches have design which very similar those used tool machines. This solution guarantees excellent cable retention ensures perfectly symmetrical deformation cable. multicontact series also available with hexagonal crimping (MIL-C-22520F). Material treatment
Component Center piece Collet Crimp ferrule Reducer Reducing cone Grounding cone Metal washer Gasket Material (standard) Brass (UNS 38500) Brass (UNS 38500) Copper (UNS 18700) Brass (UNS 38500) Brass (UNS 38500) Brass (UNS 38500) Brass (UNS 38500) Silicone MQ/MVQ (Viton®) Surface treatment (µm) Nickel Gold Notes: Standards surface treatment follows: Nickel-plated: QQ-N-290A.
Cable clamping
Type cable clamping series) This system includes grounding center-piece collet which compressed collet ensure good clamping cable. When assembling cable, cable shield gripped between grounding centerpiece collet. grounding center-piece design depends connector type: single part with opening series single contact multicontact series with contacts only circumference insulator; parts multicontact type connectors with contacts circumference center insulator.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Type cable clamping (FFL model series) This clamping system assembled onto plugs designed crimp contacts. includes same components series, page 160. Type cable clamping series) This clamping system which includes part center-piece collet, does make possible connect cable shield connector shell. delivered only upon request only assembled onto single contact multi-contact type connectors. This only possible clamping type 5S.112 type.
Type cable clamping series) This clamping system provides screened unscreened cables with diameters larger than maximum specified each series. includes oversize collet housing collet collet next series size requires long-er split center-piece
Type cable clamping single contact series) This clamping type specified only single contact series. rear crimp backnut which receives shield braid knurled ensure good retention shield once crimped under crimp ferrule
Type cable clamping series) This clamping system includes split insert carriers which position insulator into connector collet which compressed collet ensuring cable clamping. When assembling connector, cable shield clamped between split insert carrier collet.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Type cable clamping series) This clamping system adapted cables with diameter smaller than smallest diameter specified each series. includes reducer collet smaller series reducing cone These parts have same function type collet.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Technical Tables
Table Wire Gauges
Construction Strand AWG/ strand wire (mm) 6.9596 5.5118 4.4450 4.3942 3.3020 2.9210 2.6162 2.5146 2.3114 2.3622 2.5400 2.0828 2.0574 1.8542 2.0828 1.6510 1.5748 1.5748 1.4986 1.5494 1.3208 1.2700 1.2700 1.3208 1.2954 1.2700 1.0414 1.0160 1.0414 1.0160 0.9906 0.8382 0.8382 0.7874 0.6604 0.6604 0.6858 0.6350 0.5588 0.5588 0.5080 0.4318 0.4318 0.4064 0.3302 0.3302 0.2794 0.2794 0.2286 0.1693 0.127 0.1016 0.078 (in) 0.274 0.217 0.175 0.173 0.13 0.115 0.103 0.099 0.091 0.093 0.082 0.081 0.073 0.082 0.065 0.062 0.062 0.059 0.061 0.052 0.05 0.05 0.052 0.051 0.05 0.041 0.04 0.041 0.04 0.039 0.033 0.033 0.031 0.026 0.026 0.027 0.025 0.022 0.022 0.02 0.017 0.017 0.016 0.013 0.013 0.011 0.011 0.009 0.007 0.005 0.004 0.003 Wire section (mm2) 21.5925 13.5885 8.5127 8.6053 5.3204 4.7397 5.2614 3.2936 2.9765 3.0847 3.6321 3.3081 2.0775 1.9413 2.2704 2.0820 1.3072 1.3174 1.2293 1.4330 1.3076 0.8234 0.8447 0.9627 0.8107 0.8967 0.8229 0.5320 0.6162 0.5067 0.5631 0.5189 0.3821 0.3547 0.3243 0.2045 0.2407 0.2270 0.2047 0.1540 0.1408 0.1281 0.0925 0.0887 0.0804 0.0568 0.0507 0.0341 0.0324 0.0201 0.0127 0.0081 0.0049 0.0335 0.0211 0.0132 0.0133 0.0082 0.0073 0.0082 0.0051 0.0046 0.0048 0.0056 0.0051 0.0032 0.0030 0.0035 0.0032 0.0020 0.0020 0.0019 0.0022 0.0020 0.0013 0.0013 0.0015 0.0013 0.0014 0.0013 10-4 0.0010 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-5 10-5 10-5 10-5 10-5 10-5 10-5 10-6 Conductor (mm) 0.40 2.14 0.40 1.72 4.50 0.40 1.38 3.60 0.30 1.50 2.76 0.30 0.86 2.25 0.25 0.68 1.78 0.25 0.52 1.14 0.20 0.43 1.15 0.15 0.20 0.15 0.20 0.80 0.25 0.60 0.15 0.20 0.10 0.10 0.07 0.10 (mm) 7.50 6.10 6.00 4.90 4.50 4.70 3.95 3.60 3.70 3.15 2.76 2.80 2.58 2.25 2.15 2.04 1.78 1.60 1.56 1.40 1.35 1.29 1.15 1.20 1.15 1.00 0.95 0.90 0.80 0.75 0.60 0.75 0.65 0.50 0.40 0.40 0.40 (in) 0.295 0.240 0.236 0.192 0.177 0.155 0.155 0.141 0.145 0.124 0.108 0.110 0.098 0.082 0.084 0.080 0.070 0.062 0.061 0.055 0.053 0.050 0.045 0.047 0.045 0.039 0.037 0.035 0.031 0.029 0.023 0.029 0.023 0.019 0.015 0.015 0.015 Section (mm2) 25.00 25.00 16.00 16.00 16.00 10.00 10.00 10.00 6.00 6.00 6.00 4.00 4.00 4.00 2.50 2.50 2.50 1.50 1.50 1.50 1.00 1.00 1.00 0.75 0.75 0.75 0.50 0.50 0.50 0.34 0.28 0.25 0.22 0.14 0.11 0.09 0.09 Section 0.0387 0.0387 0.0248 0.0248 0.0248 0.0155 0.0155 0.0155 0.0093 0.0093 0.0093 0.0062 0.0062 0.0062 0.0038 0.0038 0.0038 0.0023 0.0023 0.0023 0.0015 0.0015 0.0015 0.0011 0.0011 0.0011 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4
Table wire gauges according IEC-228 standard
Note:
included standard
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Conversion Tables millimeters/inches
(mm) 0.02 0.03 0.10 0.16 0.18 0.20 0.30 0.40 0.48 0.50 0.51 0.54 0.60 0.70 0.80 0.86 0.87 0.90 0.91 0.95 1.00 1.21 1.29 1.30 1.32 (in) 0.0007 0.0011 0.0039 0.0062 0.0071 0.0078 0.0118 0.0157 0.0188 0.0196 0.0201 0.0212 0.0236 0.0275 0.0315 0.0338 0.0342 0.0354 0.0358 0.0374 0.0393 0.0476 0.0507 0.0512 0.0519 (mm) 1.37 1.40 1.50 1.52 1.60 1.70 1.71 1.80 2.00 2.10 2.20 2.42 2.50 2.60 2.70 2.80 2.95 3.00 3.05 3.10 3.20 3.30 3.50 3.78 3.80 (in) 0.0539 0.0551 0.0590 0.0598 0.0629 0.0669 0.0673 0.0708 0.0787 0.0826 0.0866 0.0953 0.0984 0.1023 0.1063 0.1102 0.1161 0.1181 0.1201 0.1220 0.1259 0.1299 0.1378 0.1488 0.1496 (mm) 3.90 4.00 4.36 4.50 5.00 5.08 5.20 5.37 5.50 5.80 6.00 6.20 6.30 6.40 6.50 6.80 7.00 7.10 7.40 7.50 8.00 8.30 8.60 8.70 8.80 (in) 0.1535 0.1575 0.1716 0.1771 0.1968 0.1999 0.2047 0.2114 0.2165 0.2283 0.2362 0.2441 0.2480 0.2519 0.2559 0.2677 0.2755 0.2795 0.2913 0.2952 0.3149 0.3267 0.3385 0.3425 0.3464 (mm) 8.90 9.00 9.40 9.50 9.60 9.70 10.00 10.30 10.40 10.50 10.70 10.80 11.00 11.50 11.70 12.00 12.60 12.90 13.00 13.70 14.00 14.30 14.50 15.00 15.50 (in) 0.3504 0.3543 0.3701 0.3740 0.3779 0.3818 0.3937 0.4055 0.4094 0.4134 0.4212 0.4252 0.4331 0.4527 0.4606 0.4724 0.4961 0.5078 0.5118 0.5393 0.5512 0.5629 0.5708 0.5905 0.6102 (mm) 16.00 16.10 17.00 17.50 17.80 18.00 18.20 18.50 19.00 19.50 20.00 20.50 20.60 21.00 21.50 21.80 22.00 23.00 23.80 24.00 25.00 25.50 26.00 28.00 28.50 (in) 0.6299 0.6338 0.6693 0.6889 0.7007 0.7086 0.7165 0.7283 0.7480 0.7677 0.7874 0.8071 0.8110 0.8267 0.8464 0.8582 0.8661 0.9055 0.9370 0.9448 0.9842 1.0039 1.0236 1.1023 1.1220 (mm) 29.50 30.00 30.80 31.00 31.80 32.00 33.00 33.50 34.00 34.50 35.70 36.00 40.00 41.00 42.00 43.00 45.00 45.50 46.50 50.00 60.00 65.00 70.00 78.00 150.00 (in) 1.1614 1.1811 1.2125 1.2204 1.2519 1.2598 1.2992 1.3188 1.3385 1.3582 1.4055 1.4173 1.5748 1.6141 1.6535 1.6929 1.7716 1.7913 1.8307 1.9685 2.3622 2.5590 2.7559 3.0708 5.9055
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Terms Conditions
Acceptance: Buyer's order contains written, printed stamped provisions conditions inconsistent with written, printed stamped provisions this Agreement attached hereto, provisions conditions this Agreement shall prevail. Buyer shall contact LEMO within days receipt LEMO Terms Conditions objection raised. Failure Buyer timely object shall deemed acceptance Buyer LEMO USA's Terms Conditions. timely objection raised Buyer LEMO Terms Conditions, order(s) will entered until agreement writing reached. orders subject acceptance Seller. Seller's acceptance expressly conditional upon Buyer's acceptance LEMO Terms Conditions. Pricing: Prices based continuous manufacture rates delivery specified. Buyer will charged direct additional cost which Seller reason interruption production Buyer's request, default. Applicable Law: Purchase Order subject applicable provisions Uniform Commercial Code, under laws State California. Buyer's Liability: Buyer liable costs associated with completed units, shipped unshipped, labor materials work process, materials hand and/or specific Buyer's Order reasonable direct damages, lead time specified advance requested date cancellation. License: submission quotation order acknowledgment does grant imply license under patents owned controlled Seller, which become owned controlled Seller. Buyer's Default: event Buyer cancels contract embodied Buyer's Order this acceptance thereof, whole part, such contract canceled Seller because default Buyer, Buyer shall Seller reason such cancellation default reasonable direct damages sustained, including costs associated with completed units, shipped unshipped, labor materials work process, materials hand and/or specific Buyer's Order reasonable direct damages, lead time specified advance requested date cancellation, current price applicable total quantity ordered time default. Notwithstanding foregoing, item items ordered NON-CANCELABLE/NON-RETURNABLE Buyer shall purchase 100% quantity ordered. event Seller does meet confirmed delivery date agreed with Buyer evidenced writing, Seller shall allowed opportunity reschedule delivery Buyer shall entitled cancel Order such reason. event Seller does meet said rescheduled delivery, Buyer cancel Order default under Agreement, including terms this Section Indemnity: Buyer hereby specifically agrees save Seller harmless indemnify Seller against claims damage profits costs attorney fees incurred Seller resulting from suit suits arising from alleged infringements patents, design copyrights, trademarks with respect goods manufactured, either whole part, Buyer's specifications. Seller, expense, will defend Buyer customer against reasonable good faith claim based allegation that unaltered LEMO product infringes patent copyright another; provided however, that such obligation shall apply LEMO product manufactured Buyer's specifications and/or designs (ii) product that been modified, altered, misused damaged Buyer third party. Seller shall reasonable resulting costs, damages attorney's fees finally awarded against Buyer customer that attributable such claim will part settlement that attributable such claim, provided that: Buyer notifies Seller promptly writing claim; Seller permitted control defense settlement claim; Buyer customer cooperate reasonably such defense settlement. Returns: NON-CANCELABLE/NON-RETURNABLE products shall returned. Subject Section Subsection Distribution Agreement Buyer intends return standard product, return authorization number required prior return shipment product subjected restocking fee. Seller reserves right issue return authorization. Product must returned (with shipping costs prepaid) original packaging original condition when purchased, undamaged, reconfigured, obsolete, use, shall have been previously shipped from Seller Buyer customer more than year prior date return. Seller reserves right accept damaged product credit, replacement, substitution. damaged product accepted Seller credit, damage caused negligence Buyer, Buyer will costs refurbishment damaged product. Discovery product defect return product shall made period time following delivery provided applicable sections Uniform Commercial Code. event return, Seller shall have right, sole discretion, replace, substitute, issue credit Buyer. Payment: invoices delinquent days past invoice date will subject month finance charge. Overdue accounts placed credit hold shipments held. Buyer agrees reasonable collection charges, including attorney fees, event account delinquent more than days. Payment Taxes: event sales tax, manufacturer's tax, other applicable shipment made Buyer Buyer's order, such shall added selling price shall paid Buyer.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Title/Risk Loss: prices F.O.B. Rohnert Park, California, days/Net days Seller obligations hereunder completed when Seller delivers items, properly consigned, common carrier, Seller's delivery such carrier shall constitute delivery thereof Buyer. Warranties: Seller warrants Buyer that Goods will conform applicable drawings design standards. express warranty forth this agreement exclusive lieu other express implied warranties, limited warranties merchantability fitness particular purpose. EXCEPT EXPRESSLY FORTH THIS AGREEMENT, SELLER DISCLAIMS EXPRESS IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES, WARRANTIES MERCHANTABILITY WARRANTIES FITNESS PARTICULAR PURPOSE USE. Disputes Resolution; Attorney's Fees: parties agree that disputes questions arising hereunder including construction application Agreement, including these Terms Conditions shall settled State California, according laws State California. parties hereto hereby consent jurisdiction venue Superior Court Sonoma County, California, Federal District Court Northern District California, with respect disputes disagreements under Agreement, including these Terms Conditions agree that action with respect foregoing shall brought maintained only such courts sitting Northern District California Sonoma County, appropriate. court action equity, which brought parties enforce interpret provisions Agreement, including these Terms Conditions, prevailing party will entitled costs reasonable attorney's fees, addition other relief which that party entitled. Confidentiality: Both parties acknowledge that during course business, each obtain confidential information regarding other party's business. Both parties agree treat such information confidential take reasonable precautions against disclosure such information unauthorized third parties during five years after term orders. Upon request owner, documents relating confidential information will returned such owner. Assignment: agreed parties that there will assignment transfer order interest orders. Action party violation this provision will dismiss other party from further obligations arising from orders. Entire Terms Conditions: These Terms Conditions, together with Agreement contain entire agreement parties there other promises conditions other agreements whether oral written. This document, together with Agreement, supersedes prior written oral agreements between parties. Amendment: These Terms Conditions modified amended amendment made writing signed both parties; provided however, that terms Agreement shall control case where there conflict between these Terms Conditions Agreement. Severability: provision these Terms Conditions shall held invalid unenforceable reason, remaining provisions shall continue valid enforceable. court finds that provision invalid unenforceable, that limiting such provision would become valid enforceable, then such provision shall deemed written, construed enforced limited. Waiver Contractual Right: failure either party enforce provision these Terms Conditions shall construed waiver limitation that party's right subsequently enforce compel strict compliance with every provision this Contract. Limitation Damages: Buyer's consequential incidental damages Seller breach contract, except Seller's gross negligence willful misconduct, will limited purchase price. Subject Section hereof, Seller will have liability Buyer damages, losses, liabilities, injuries, claims, demands expenses arising directly indirectly connected with product. Seller shall liable exemplary, indirect, incidental, consequential damages sustained incurred connection with product regardless form action, whether contract, tort (including negligence) strict liability. SELLER SHALL LIABLE DAMAGES CAUSES BEYOND REASONABLE CONTROL SELLER ATTRIBUTABLE SERVICE, PRODUCTS, ACTIONS PERSON OTHER THAN SELLER REGARDLESS FORM ACTION WHETHER SUCH DAMAGES FORESEEABLE. NEITHER PARTY SHALL LIABLE OTHER PARTY DELAYS, FAILURE PERFORMANCE, LOSS DAMAGE FORCE MAJEURE CONDITIONS SUCH FIRE; LIGHTENING; STRIKE; EMBARGO; EXPLOSION; POWER SURGE FAILURE; ACTS GOD; WAR; TERRORIST ATTACKS, LABOR DISPUTES; CIVIL DISTURBANCES; ACTS CIVIL MILITARY AUTHORITY; INABILITY SECURE MATERIALS, FUEL, PRODUCTS TRANSPORTATION FACILITIES; ACTS OMISSIONS SUPPLIERS, OTHER CAUSES BEYOND REASONABLE CONTROL, WHETHER SIMILAR FOREGOING.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Product Safety Notice
PLEASE READ FOLLOW INSTRUCTIONS CAREFULLY CONSULT RELEVANT NATIONAL INTERNATIONAL SAFETY REGULATIONS YOUR APPLICATION. IMPROPER HANDLING, CABLE ASSEMBLY, CONNECTORS RESULT HAZARDOUS SITUATIONS. SHOCK FIRE HAZARD Incorrect wiring, damaged components, foreign objects (such metal debris), presence residue (such cleaning fluids), result short circuits, overheating, risk electric shock. Mated components should never disconnected while live this result exposed electric local overheating, resulting possible damage components. HANDLING Connectors their components should visually inspected damage prior installation assembly. Suspect components should rejected returned factory verification. Connector assembly installation should only carried properly trained personnel. Proper tools must used during installation assembly order obtain safe reliable performance. Connectors with exposed contacts should never live current supply side circuit). Under general conditions voltages above considered hazardous proper measures should taken eliminate risk transmission such voltages exposed metal part connector. TEST OPERATING VOLTAGES maximum admissible operating voltage depends upon national international standards force application question. creepage distances impact operating voltage; reference values indicated catalog however these influenced board design wiring harnesses. test voltage indicated catalog mean breakdown voltage; test applied test duration minute. MARKING Marking applied complete product device, implies that device complies with several European safety directives. Marking applied electromechanical components such connectors. PRODUCT IMPROVEMENTS LEMO Group reserves right modify improve products specifications without providing prior notification.
Data Subject Change
LEMO 800-444-5366 www.lemousa.com
Design Engineering Services
DATE:
LEMO creates custom designs your unique application, ranging from connector multi-component assemblies. Custom Connectors Precision designs tested your specifications Cable Assembly Electronic hybrid fiber optic cable assemblies meet wide variety demanding applications Cable Assembly Integration Consultation routing cable connections within your product Rapid Prototyping Onsite engineering rapid prototyping capabilities assist high demands product development Pro/ENGINEER® solid models available
Manufacturing Services
Outsource your manufacturing challenges. LEMO's capable engineering staff create solutions your cable assembly component sub-assembly designs. Cable Assembly Expertise both electronic fiber optic connector termination Overmolding Design Manufacture Custom overmold designs enhance aesthetics while providing durability strength Sub-Assembly Build Combine connectors cable assemblies with your sub-assemblies provide tested proven module
interested
Design Engineering Services Manufacturing Services
Please send information
Name Title Company Name Street City State Telephone
Rep. Name Email
Please detach directly LEMO (707) 578-0869, mail LEMO USA, Attn.: Engineering, P.O. 2408, Rohnert Park, 94927-2408
Data Subject Change
LEMO 800-444-5366 www.lemousa.com

Reference Type Collet Cable max. min. Part number

Top Searches for this datasheet

Other recent searches