ACULED® (Very High Lumen) delivers outstanding brightness, improved lu

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

ACULED® (Very High Lumen) delivers outstanding brightness, improved lu

Datasheet Thumbnail

Top Searches for this datasheet

ACULED® VHLRed ACL01-SC-RRRR-007-C01-L-0000
ACULED® (Very High Lumen) delivers outstanding brightness, improved luminous efficacy excellent thermal management, compact, easy-to-assemble package.
ACULED VHL(Very High Lumen) newest addition growing ACULED® family standard custom high-power solutions based PerkinElmer Elcos' superior Chip-onBoard (COB) technology. ACULED® delivers superior brightness, luminous efficacy, stepchange improvement thermal management. based enhanced ACULED® board utilizing Insulated Metal Core Substrate (IMS) made copper highly sophisticated isolation material with thermal resistance between copper chip pads. PerkinElmer's ACULED compact size, easy assemble superior optical design. addition, each chip separate anode cathode enabling each chip driven individually, thus increasing flexibility electrical layout.
Features Benefits
ACULED available standard monochromatic (UV, Blue, Green, Yellow, Red, well multi-colored four-chip combinations including RGBY version which offers higher color rendering index than basic ACULED® RGGB. Additional optics easily attached. sensitive chip types, safe reliable protection enabled using Zener diodes. ACULED® well members ACULED® product family fully RoHS-compliant.
High power light source utilizing multi Chip-on-Board (COB) technology Outstanding brightness luminous efficacy Step-change improvement thermal management based ACULED VHL's enhanced board thermal resistance package K/W, depending upon chip configuration Each chip separate anode cathode increases flexibility electrical layout Ultra-compact footprint easy-toassemble design Various standard configurations monochromatic multi-colored four-chip versions Designed high current applications Fully RoHS-compliant
Applications
High power light source general illumination Specialty lighting vision systems Architectural landscape lighting Entertainment mood lighting Medical lighting Backlighting projection Displays signs
DATASHEET
Table Contents
Product Nomenclature Average Lumen Maintenance Characteristics Environmental Compliance Ordering Information Flux Characteristics Table Intensity Bins Table Wavelength Bins Optical Electronic Characteristics*** Maximum Ratings Tables Characteristics Mechanical Electrical Specification Reliability Information Soldering Hand Soldering Cautions Notes Packaging Optics Heat Sink Recommendations ACULED Designer
ACULED Flexibility "Design-Your-Own" High Power
DATASHEET
Product Nomenclature
Average Lumen Maintenance Characteristics
Typically, lifetime solid-state lighting devices, LEDs, derived from percentage initial light output that remains after specific time period generally referred lumen maintenance. PerkinElmer projects that ACULED® products, operating forward current will average lumen maintenance after 30,000 hours constant current operation with junction temperature maintained below 110° This performance based three criteria independent test data, PerkinElmer historical data from tests similar material systems, internal ACULED reliability testing. achieve this level lumen maintenance, design limits included this datasheet must adhered carefully.
Environmental Compliance
PerkinElmer proud commitment providing best environmentally- friendly products customers solid state lighting market. ACULED® exception complies with European Union directives restriction hazardous substances electronic equipment stated within RoHS directive. following restricted materials will intentionally added ACULED® lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) polybrominated diphenyl ethers (PBDE).
DATASHEET
Ordering Information Flux Characteristics
Board temperature 25°C
Part-Number Description Type Color Luminous Flux [lm] Luminous Intensity [cd]
IF=700
Min. Typ.
IF=700
E001702 ACULED ACL01-SC-RRRR007-C01-L-P000 Typ.
Table Intensity Bins
Board temperature
Luminous Flux [lm] Rank
Min.
Max.
Table Wavelength Bins
Board temperature 25°C;
Dominant Wavelength [nm] Rank Main wavelength binning
Min.
Max.
Optical Electronic Characteristics***
Ambient temperature
Parameter Luminous flux* Luminous flux* Luminous flux** Luminous flux** Luminous intensity* Luminous intensity** Dominant wavelength Peak emission wavelength Spectral half bandwidth Forward voltage chip Symbol Value Unit lm/W lm/W nm/K nm/K mV/K degree Cd/cm2 Cd/cm2
typ. typ. typ. typ. typ. typ. typ. typ. peak typ. typ. Optical efficacy* typ. Optical efficacy** typ. Temperature coefficient typ. dom) 0.04 Temperature coefficient peak typ. peak) 0.15 Temperature coefficient chip typ. TC(Vf) Viewing angle typ. Radiating surface**** typ. Arad Luminance* typ. 1175 Luminance** typ. Thermal resistance junction board typ. Values junction temperature Values board temperature intensity rank **** between chips included Adequate heat sink required. Derating must observed maintain junction temperature below maximum.
DATASHEET
Maximum Ratings
Parameter Operating temperature range Storage temperature Junction temperature Forward current chip Surge current chip Forward voltage chip Reverse voltage chip Reverse current (VR=5 Power consumption sensitivity Soldering temperature Reflow sec) Hand sec.) Symbol Ptot Tsold Tsold Value 1000 Unit
Tables Characteristics
Typical Spectral Distribution
DATASHEET
Board temperature 25°C Forward current
Forward Current Chip f(VF) Maximum Forward Current Chip f(TB)
Luminous Flux f(IF)
Relative Luminous Flux f(TB)
Dominant Wavelength f(IF)
Dominant Wavelength f(TB)
DATASHEET
Mechanical Electrical Specification
Electrical Polarity
Chip
Chip Color
Package: Encapsulating Resin: Ring: Electrodes:
Silicone based Plating
DATASHEET
Reliability Information
PerkinElmer Reliability Test Program Test Item Resistance Soldering Heat (Reflow Soldering) Temperature Cycle Test, Content Test Stability device RoHS conform soldering conditions Test Condition Remarks soldering cycle. operation during test Operation nominal current Measurement Visual Inspection. Measurement illuminance before after test Visual Inspection. Measurement after 100, cycles Visual Inspection. Measurement after 1000h Visual Inspection. Measurement after 1000h Visual Inspection. Measurement after 1000h Visual Inspection. Measurement after 250, 500,1000h Visual Inspection. Measurement after 250, 1000h Visual Inspection. Measurement after 250, 1000h Visual Inspection. Measurement before after test. Ref. Standard JEDEC J-STD-020C
Tsold 260° (Pre treatment DUT: Tsold=30° 70%, 12h) Stability device under =-40° 120° thermal stress, fast dwell time: change temperature cycles: 200, cycle time: 110° test duration: 1000h
60068-2-14
High Temperature Stability device Test, long term storage high temp. Temperature Test, Stability device long term storage temp.
Operation nominal current Operation nominal current Operation nominal current Operation nominal current Operation nominal current Operation nominal current
60068-2-2
-40° test duration: 1000h
60068-2-1
Temperature Humidity Storage, Operation Life Test
Stability device Tenv stored long term RH=85%, high temper-ature test duration: 1000h high humidity. Stability device operated under nominal conditions Stability device under electrical thermal stress high humidity Stability device high junction temperature operated nominal current Stability device under mechanical stress. Sinusoidal vibration RH=30%, test duration: 1000h
60068-2-67
60068-1
Steady State Oper-ating Life High Humidity Heat Operation Life Test High Temperature
RH=90%, test duration: 1000h test duration: 1000h
60068-2-78
60068-2-2
Vibration Test
Electrostatic Discharge
f=20-2000Hz acceleration: amplitude: ±0.751 sweep rate: octave/min Stability device under Test Voltage=2kV electrostatic stress (R=1,5k, C=100pF)
Number cycles: test duration: 3x16min Non-operation during test Positive negative discharges: with ESD-generator. Non-operation during test
60068-2-6
Visual Inspection. Measurement illuminance before after test.
JEITA ED-4701
test done after sample cooled down room temperature Tsold=Soldering temperature, TA=Ambient temperature, Ifn=350mA, Device under Test. tests performed PerkinElmer Elcos standard heat sink.
DATASHEET
Soldering
Figure
Reflow Soldering Profile
Figure
Recommended Solder Geometry
Hand Soldering
Pre-heat ACULED plate 100° soldering iron. Apply soldering temperature 400° max. three seconds.
Cautions
Note: according 60825-1 60826): radiation. view directly with optical instruments. products ACULED ACULED mainly emit invisible radiation that cause severe damage human eye.
DATASHEET
Notes
PerkinElmer maintains tolerance flux power measurements. ACULED products with even higher luminous flux radiometric power levels will become available future. Dominant wavelength derived from 1931 chromaticity diagram represents perceived color. PerkinElmer maintains tolerance dominant wavelength measurements. PerkinElmer maintains tolerance peak wavelength measurements. PerkinElmer maintains tolerance thermal resistance measurements depending chip properties. green, cyan, blue, products built with Indium Gallium Nitride (InGaN). yellow products built with Aluminum Indium Gallium Phosphide (AlInGaP). infrared products built with Aluminum Gallium Arsenide (AlGaAs). Blue royal blue power light sources represented here IEC825 class safety. Proper current derating must observed maintain junction temperature below maximum. LEDs designed driven reverse bias. Stresses excess absolute maximum ratings cause damage emitter. Maximum rating limits apply each parameter isolation, parameters having values within current derating curve. should assumed that limiting values more than parameter applied product same time. Exposures absolute maximum ratings extended periods adversely affect device reliability. special conditions manufacturing processes LEDs, typical data calculated correlations technical parameters only reflect statistical figures. These necessarily correspond actual parameters each single product, which could differ from typical data calculated correlations typical characteristic line. requested, e.g. because technical improvements, these typ. data will changed without further notice. drawings scale. dimensions specified general mounting instructions thermal management requirements, please refer application notes accordingly.
Please consult PerkinElmer distributors more information.
Packaging
DATASHEET
Optics
Currently, ACULED lens holder system offers different collimating optics. With opening angle approximately ACULED LHS-AL25-L32 (E000525) provides medium opening, whereas LHS-AL25-L22 (E000524) tight collimating optic with aperture angle approximately their superior optical quality, both optics increase luminous intensity and, thereby, enable application fields ACULED. Please contact further information receive datasheet ACULED LHS-AL25.
Figure
Opening Angle: Example with Lens
Heat Sink Recommendations
maximum junction temperature ACULED should exceed 125° Therefore, adequate heat sink required operating with currents between ACULED's superior thermal management, heat dissipation optimized when screwed down with thermal grease onto planar substrate.
ACULED Designer
PerkinElmer designed Designer test ACULED your application. easy does require specialized technical know-how. Please contact receive product description additional information obtain Designer Kit.
ACULED Flexibility "Design-Your-Own" High Power
addition ACULED VHL, PerkinElmer's line standard monochromatic multi-colored high powered LEDs, PerkinElmer also debuting exclusive "DesignYour-Own" line, ACULED® DYOTM. ACULED gives customers total flexibility design their four-chip configuration suit their specific application. more information ACULED line, please refer ACULED Custom Design Guide.
North American Sales Office PerkinElmer Optoelectronics Congress Street Salem, 01970, Telephone: 978-745-3200 Toll free: (North America) 800-950-3441 Fax: 978-745-0894 Email: opto@perkinelmer.com
European Headquarters PerkinElmer Optoelectronics Wenzel-Jaksch-Str. 65199 Wiesbaden, Germany Telephone: (+49) 611-492-247 Fax: (+49) 611-492-170 Email: opto.Europe@perkinelmer.com
Asia Headquarters PerkinElmer Optoelectronics Ayer Rajah Crescent #06-12 Singapore 139947 Telephone: (+65) 6775-2022 Fax: (+65) 6775-1008 Email: opto.Asia@perkinelmer.com
complete listing global offices, visit ©2007 PerkinElmer, Inc. rights reserved. PerkinElmer logo design registered trademarks PerkinElmer, Inc. ACULED®, VHLTM, DYOare trademarks PerkinElmer, Inc. subsidiaries, United States other countries. other trademarks owned PerkinElmer, Inc. subsidiaries that depicted herein property their respective owners. PerkinElmer reserves right change this document time without notice disclaims liability editorial, pictorial typographical errors. 600192_01 DTS0507

ACULED® (Very High Lumen) delivers outstanding brightness, improved lu

Top Searches for this datasheet

Other recent searches