Digital Fiber Sensors Perfection Transcended! Wealth Advanced Fun
|
|
|
Top Searches for this datasheet
E3X-DA-S
Digital Fiber Sensors
Perfection Transcended! Wealth Advanced Functions Easy Reliable Application
Evolution Perfection
next-generation platform wide range sensing
industry's first Power Tuning Function digital sensor.
Large, Easy-to-Read Displays that clear even from distance. Seven convenient display formats.
Stable long-term performance achieved with OMRON's Auto Power Control (APC) function.
wide array Advanced Functions even more applications.
same Ease-of-Use E3X-DA-N Amplifier.
Environmentally Friendly design.
Improved Mobile Console.
Industry's First Power Tuning Function Digital Sensor.
complicated mode settings.
Troublesome power adjustments have been eliminated, isn't necessary select from power mode settings, such long-distance mode, standard mode, short-distance mode. When MODE pressed once, power tuning function shifts power level that present incident level ideal level (2000 digital display.)
Large, Easy-to-Read Displays: Clear Even from Distance
displays large easy-to-read, despite small case.
Large, bright operation indicator (like earlier models)
Patent Pending
Incident level
Threshold level
mode
Earlier Method
High-speed mode Short-distance mode Standard mode
Incident level Threshold level
Incident insufficient Appropriate Appropriate
Method
Press
power modes 5-fold increase Settings made more simply confidently with digital displays. example, threshold value changed while reading incident level setting changed while confirming setting's function item number.
Industry's largest characters: (like earlier models)
Power tuning indicator added indicate setting status.
Function
1/25 reduction
Setting
Long-distance mode
Saturated Sensor used immediately without setting mode. incident light level high low, just press Mode achieve optimum status.
mode
Function numbers added function items. Settings reversible.
Super-long-distance mode
Saturated best mode each application selected from several power modes.
Insufficient light saturation short distances corrected.
power tuning range extended allowable limits eliminate problems such insufficient light detection failures saturation. installation distance short, incident light saturate (i.e., digital incident level 4,000), preventing detection. power tuned down 1/25th default setting stable detection even close range.
Seven Convenient Display Formats
Press
incident level/threshold display, percentage/threshold display, large graph display have been added, select best display method application.
Patent Pending
Without workpiece Incident level does change. Incident level changes. Incident Level/Threshold Display Percentage/Threshold Display Large Graph Display
Incident light incident light
Transparent workpiece
With workpiece
Detection possible
Detection possible.
Incident level
Threshold level
Incident level
Threshold level
display
Change threshold level while reading incident level.
Variations between different Sensors eliminated.
Threshold levels maintained separately individual Sensors variations digital light levels measured each Sensor. With power tuning, incident level fine-tuned same threshold level each Sensor application. Maintenance also simplified because easier recognize measurement levels that have shifted during operation. Incident Level/Peak Hold Display
Verify difference between incident level threshold level while setting threshold level.
Check incident level intuitively. Ideal when better view analog display instead actual digital level.
Peak Hold/Bottom Hold Display
2010 2055
Press
Earlier Method
Method
Incident level
Peak hold
Threshold level
1350
1280
Detecting missing tablets
Digital light levels vary individual differences Sensors, threshold levels must individually.
Amplifiers same digital light level, same threshold level maintained Sensors.
Simultaneously display peak hold level present incident level. optical axis adjusted more easily surely checking peak hold level while adjusting optical axis.
Display peak level when light brightest bottom level when light dimmest. digital levels high-speed objects read precisely. (Refreshing hold level changed from fixed time synchronizing with output, peak bottom hold values checked with certainty.)
Stable, Long-term Performance with OMRON's Function
OMRON provides industry's most stable long-term detection using 4-element LEDs (Auto Power Control) circuit.
addition unique circuit used E3X-DA-N Amplifiers compensate deterioration LED, E3X-DA-S uses 4-element LEDs counteract deterioration light-emitting elements over time achieve industry's most stable long-term detection performance. Furthermore, circuit designed with excess light capacity, Sensors used with high stability regardless whether circuit OFF.
Many Advanced Functions Even More Applications
Fastest Industry
Detecting Leads Electronic Parts
Highest Level Stability
Provides high-speed response miniature workpieces, such chip parts devices with short tact times. Three kinds timer functions supported. timers between one-shot timer supported addition ON-delay OFF-delay timers. Amplifier's time fixed, which useful during high-speed workpiece detection.
Earlier Method
3-element Incident level Incident level
Method
4-element Long-term stability
Discriminating Tablet Lengths
Without circuit Without circuit
Time
Time
Area output function used range judgement. (Advanced Twin-output Models)
Operations that required multiple Sensors, such height measurement, performed with just Sensor. threshold levels easily output within-range out-of-range outputs.
Area output
Incident level
2000 Threshold
1000
Threshold
Compensate effects contaminants temperature variation with differential operation mode. (Advanced Models)
This operation mode uses special OMRON algorithm compensate slight light level changes dirt temperature variations detect only light level changes workpiece.
Output
Time
Detecting Seals
Slight light level changes detected with stability precision, eliminating need time-consuming manual adjustments light level changes.
Detecting marks dusty environment
Remote input function control Sensor remotely. (Advanced External-input Models)
Patent Pending
Input signals make various remote settings, such teaching operations, power tuning, emitter OFF. This model ideal diverse needs, such checking Sensor operation remotely before operation making settings remotely because teaching performed often frequent workpiece model changes.
With Twin-output Amplifiers, output function alarm output (light level operation) indicate when light level changed dirt other causes.
Light Level Operation (Normal Operation)
Judges light level changes comparing incident level threshold level.
Differential Operation
Judges light level changes comparing incident level time-averaged incident level.
counter function output signal after counter Patent Pending counts down. Counter Function (Advanced External-input Models) Down Counter Counter
counter function built-in, number workpieces counted without separate counter small that used required.
Incident level Incident level Threshold level
Detecting Chip Components
Incident level
Incident level
Alarm output
Detecting knots thread
Threshold level (absolute value)
Time Counter Counter
Time Counter value
Incorrect operation light level change
Alarm output threshold
Light level difference (absolute value)
Time Time
Time
light level varies dirt, temperature variations, other environmental factors.
Time
Detecting differences light level enables setting more subtle light level differences.
Incorrect operation
Minute changes detected reliably.
Output when count reaches
Output when count reaches
Same Ease-of-Use E3X-DA-N
E3X-DA-S uses OMRON's simplified wiring connectors that were introduced with E3X-DA-N.
Patent Pending
Japan patent number 3266198
Environmentally Friendly Design
Environmentally friendly features essential truly high-performance products.
Simplified Connector Design
Amplifiers connected.
Reduced Power Wiring Saves Space
<Using Amplifiers>
Connector models
Relay connectors required.
Power line Output lines only
Power supplied from master Amplifier Unit slave Amplifier Units through Master Connector.
Output lines only
Amplifiers with Connectors, power supply distributed slave connectors through single master connector. This design three major advantages.
Wiring time significantly reduced. Relay connectors unnecessary, wiring takes less space. Storage maintenance simpler because isn't necessary distinguish between master connector slave connectors Amplifier.
Optical communications Power supply Master connector Slave connector
Prewired models
cables Streamlined wiring Eliminate installation time, cost, space associated with relay connectors.
Separate power lines output lines required each Amplifier.
Materials containing lead have been completely eliminated.
Fiber Sensor first industry environmentally friendly lead-free solder.
First industry
cables
Power line
lead!
Relay connectors
Optical communications prevents mutual interference.
Mutual interference prevented with optical communications, Amplifiers mounted together.
(The number Amplifiers depends operating conditions.)
This label indicated produts that meet environmental standards established OMRON.
Optical communications
Close-mounting Sensors
Amplifiers
digital display turned dimmed during operation. Eco-mode
When digital display viewed infrequently during operation, current consumption reduced dimming display turning entirely. display will light again automatically when operation touched. (Ecomode from Mobile Console only.)
Display lit. Dimmed display
Zero reset function immediately resets digital display
Patent Pending
Japan patent number 3255229
With Workpiece
Without Workpiece
Lights operation performed.
During operation (After without operation)
Lights operation performed.
During operation (After without operation)
zero reset function immediately reset digital display time. setting reference value threshold value while monitoring differences incident light levels. threshold value will also shift simultaneously when zero reset button pressed.
Shift
Incident level difference
Zero reset
Threshold level 350.
Display reset
Cable disposal required during maintenance.
addition saving space reducing wiring time, connector design eliminates need dispose cables together with Amplifiers.
Reversible Digital Display (Reverse Mode)
digital display reversed match Amplifier's mounting direction.
Standard mode
Selectable
Cable disposal necessary.
Reverse mode
Further Improvements Mobile Console
also used with Photoelectric Sensors with Separate Digital Amplifiers.
Retains Previous Advantages Mobile Console.
Settings, teaching, fine-tuning performed fiber tip.
Mobile Console used settings teaching fiber. Difficult adjustments made while checking workpiece position. Even Amplifier Sensor head separated during operation, still possible flash Sensor head display amplifier channels.
Channel Channel Channel Channel Channel
Improved Fiber Sensor Mobile Console.
E3X-DA-S Digital Fiber Sensor
E3C-LDA Photoelectric Sensor with Separate Digital Amplifier E3X-MC-S Mobile Console
With Group Teaching, Teach Multiple Amplifiers Simultaneously.
tedious teaching that performed separately each Amplifier performed several Amplifiers once using Mobile Console.
Group teaching
Group Power Tuning
With group power tuning function, power tuning possible multiple Sensors same time.
Easily multiple Sensors.
Copying Settings within Same Group
Group Power Tuning
Copy channel contents channels.
Channel
Channel Channel
channels
Channel
Settings such mode threshold settings Amplifier bank copied Amplifiers same group.
Improved Mode Lock Function
Settings customized different applications locking unnecessary function blocks within function settings.
Usercustomizable Sensors.
Copying Settings Other Groups
Function Block
Application
Manual manual operation.
group's settings copied.
Machine Machine
Manual setting
Operation
Teaching
Locked
Function setting
Locked
settings group Amplifiers machine copied group Amplifiers another machine. (The settings also copied from banks.)
Machine
Teaching
teaching operation. teaching manual operation.
Locked
Operation
Locked
Teaching
Manual
Operation
Operation
Locked
interest product improvement, specifications subject change without notice.
Authorized Distributor:
This document provides information mainly selecting suitable models. Please read Instruction Sheet carefully information that user must understand accept before purchase, including information warranty, limitations liability, precautions.
E3X-MDA Super Dual Fiber Sensor
Bringing dimension sensing.
.the 2-channel amplifier arrived.
This document provides information mainly selecting suitable models. Please read Instruction Sheet carefully information that user must understand accept before purchase, including information warranty, limitations liability, precautions.
interest product improvement, specifications subject change without notice.
Having problems gang-mounting Fiber Sensor Amplifier Units tight spaces?
Slimmest industry channel.
Amplifiers squeezed into body width Remarkable space saving approx. 50%. Power saving approx. 40%.
(Savings channel compared with existing products.)
Patent pending
Checking alignment mounting substrates
Emitting Receiving Emitting Receiving
Equipped with AND/OR control output.
types control output possible with Sensor (AND/OR). Compact PLCs Sensor Controllers longer required.
Patent pending
Detection front/back discrimination parts
Half Space
Detection bends electronic component leads
Compact Sensor Controller
Operation indicator Incident level
Channel display
AND/OR
Operation indicator Incident level
AND/OR
Channel display
Flexible control with Mobile Console.
Mobile Console, which also used with E3X-DA-S, allows handheld operation Fiber Head even when separated from Amplifier.
impressive lineup Digital Amplifiers handle wide variety applications.
host remarkable functions inside compact body. complete lineup Sensor Heads handle even wider range applications. This platform OMRON's sensing technology.
Digital Amplifiers achieve maximum response time
Standard Models
Models with Cables
(E3X-DA11-S)
Models with Connectors
Equipped with OMRON's easy-wiring connector.
(E3X-DA6-S)
Linear Platform
Laser-type Smart Sensors ZX-L Series
Inductive Displacement Smart Sensors ZX-E Series
Advanced Models
Twin-output Models
threshold values set. Judgement self-diagnosis output available.
High-resolution sensing using laser magnetic technology
(Representative model: E3X-DA6TW-S)
External-input Models
Sensor controlled externally. Equipped with counting function.
(Representative model: E3X-DA6RM-S)
Smart Monitor
wide variety color variations available. Equipped with circuit more stable detection.
Mark-detecting Models Infrared Models
Models with Green
(Representative model: E3X-DAG6-S)
improved lineup smarter sensing
lineup Smart Sensors that eddy current method
Models with Blue
(Representative model:E3X-DAB6-S)
ON/OFF Platform
Digital Fiber Sensors E3X-DA-S/MDA Series
Laser-type Photoelectric Sensors with Separate Amplifiers E3C-LDA Series
Infrared Models
Available Soon
(Representative model:E3X-DAH6-S)
common platform Fiber Sensors Sensors with Separate Amplifiers
Amplifiers squeezed into single, compact Unit. AND/OR output available.
2-channel Models
(Representative model:E3X-MDA6)
Mobile Console
Maximize Fiber Amplifier potential using remote setting, copying, other functionality.
Refinement dimension that goes beyond superior performance.
Mobile Console
(E3X-MC11-S)
Photoelectric Sensors with Separate Digital Amplifiers have joined Smart Sensor family.
Models That Counteract Decline Operating Rates Caused Dust Dirt
Advanced Models
Active Threshold Control (ATC)
Automatically adjusts threshold value. Provides error output when does adjust threshold value.
Digital Laser Sensors E3C-LDA@AT
Error Output (Selectable Function) Alarm Output (Selectable Function)
Provides alarm when maintenance required.
Digital Fiber Sensors E3X-DA@AT-S
Glass substrate detection though view ports
Chip component detection
Technology
Intelligently Solve Problems Onsite with Sensing Function
unique OMRON algorithm been used that determine whether changes have been caused dust dirt differences workpieces. threshold value automatically adjusted Sensor according changes increase equipment operating rates reducing sensing errors. This particularly true applications requiring high-precision detection.
Engine High-performance
OMRON's many years accumulated sensing technology highspeed digital processing techniques merge meet onsite needs. goal high-performance sensing that provides easy, reliable application.
Fixed Threshold Value (Previous Models)
2000 1800 absolute value threshold. Digital incident level
Reliable Detection Small Workpieces 12-bit converter (4,000 resolution), high-speed response (Fiber Sensors)
Fine Sensing
Automatic Compensation External Changes Active Threshold Control (ATC) Consistent Emitter Power Auto Power Control (APC)
Adjustment required sensing errors. Time Output
Sensing Engine
High Performance
Active Threshold Control (ATC Models)
2000 -10% relative value threshold.
Digital incident level
value threshold adjusted every (see note) prevent sensing errors. Time
Easy Operation
Easy-to-read Displays Even Distance Intelligent Display Eliminates Need Distance Mode Settings Power Tuning
Output
monitoring range Sensor according threshold value. threshold value adjusted according changes within this range.
Ordering Information Digital Fiber Sensor
Type Appearance Functions
output
Model
output
Pre-wired Models
error output
E3X-DA11AT-S
E3X-DA41AT-S
Connector Models
Alarm output
E3X-DA6AT-S
E3X-DA8AT-S
Separate Digital Amplifier Laser Sensors
Type Appearance Model Functions
output output
Pre-wired Models
error output
E3C-LDA11AT
E3C-LDA41AT
Connector Models
Alarm output
E3C-LDA6AT
E3C-LDA8AT
Ratings Specifications
Model output Type Item output Super-high-speed mode High-speed mode Response Standard mode time High-resolution mode Functions settings Startup operation E3X-DA41AT-S Operate Reset: Operate Reset: Operate Reset: Operate Reset: Active threshold control (used output signal that output selected (used output error output operation when power turned selected: operation, E3X-DA8AT-S E3C-LDA41AT Operate Reset: Operate Reset: E3C-LDA8AT Digital Fiber Sensors E3X-DA11AT-S E3X-DA6AT-S Separate Digital Amplifier Laser Sensors E3C-LDA11AT E3C-LDA6AT
Note: Basic performance same Advanced Twin-output Sensors. Refer E3C-LDA Datasheet (E338) E3X-DA-S Datasheet (E336) details. Only differences from Advanced Twin-output Sensors have been given above.
This document provides information mainly selecting suitable models. Please read Instruction Sheet carefully information that user must understand accept before purchase, including information warranty, limitations liability, precautions.
Note: this document operate Unit.
Note: Specifications subject change without notice.
Models That Eliminate Worries about Digital Sensor Setting Mistakes
Limited-function Models: Simple Easy
Easy Reliable Digital Sensors with Same Detection Performance Previous Models
One-key, one-operation concept easy operation. Threshold value setting with direct operation performed while monitoring detection status. Lock function prevent operating errors through unintentional operation.
Digital Fiber Sensors E3X-DA@SE-S
Technology
Simplest Digital Fiber Sensor Sensing Engine High-performance
Some people think that digital sensors with their advanced performance difficult use, went back drawing board rethink performance functions. Without changing basic functions like digital displays, OMRON created Digital Fiber Sensor that used easily familiar sensors with sensitivity adjustment knobs. UP/DOWN
Threshold adjustment
OMRON's many years accumulated sensing technology highspeed digital processing techniques merge meet onsite needs. goal high-performance sensing that provides easy, reliable application.
Reliable Detection Small Workpieces 12-bit converter (4,000 resolution)
Fine Sensing
Consistent Emitter Power Auto Power Control (APC)
Incident level
Threshold value
High Performance
Sensing Engine
LOCK Switch OPERATION MODE Selector TEACH
Threshold Teaching With/Without Workpiece: Teaching performed states. Automatic: Teaching performed passing workpiece.
Easy Operation
Easy-to-read Displays Even Distance Intelligent Display Key, Operation Simple easy direct operation
Ordering Information
Type Appearance
output
Model
output
Pre-wired Models
E3X-DA11SE-S
E3X-DA41SE-S
Connector Models
E3X-DA6SE-S
E3X-DA8SE-S
Ratings Specifications
Model output Type Item output E3X-DA41SE-S (650 ±10%, ripple (p-p): max. max. (Power supply: Current consumption: max.) Load power supply: 26.4 max., Open-collector output, Load current: max. (Residual voltage: max.) Power supply reverse polarity protection, Output short-circuit protection Operate Reset: Teaching manual adjustment E3X-DA8SE-S Digital Fiber Sensor E3X-DA11SE-S E3X-DA6SE-S
Light source (wavelength) Power supply voltage Power consumption Control output Protection circuits Response time Sensitivity setting
Auto power High-speed control method emission current control Functions Mutual interference Optical communications sync, possible Units prevention Indicators Digital displays Operation indicator (orange) Twin digital displays (incident level threshold)
Note: Basic performance same E3X-DA-S Series. Refer E3X-DA-S Datasheet (E336) details.
This document provides information mainly selecting suitable models. Please read Instruction Sheet carefully information that user must understand accept before purchase, including information warranty, limitations liability, precautions.
Note: this document operate Unit.
Note: Specifications subject change without notice.
Digital Fiber Sensors
E3X-DA-S/MDA
OMRON's Next-generation Platform Wide Range Detection
Features Power Tuning function that optimizes light reception press button. Combines newly developed 4-element LEDs with circuit ensure stable, long-term performance. Utilizes OMRON's innovative wire-saving connector. 2-channel models achieve thinnest profile industry, only channel. 2-channel models also offer AND/OR control output.
sure read Safety Precautions page
Features
Equipped with Industry's First Power Tuning (Optimum Light Setting) Function
E3X-DA-S/MDA features Power Tuning function that optimizes power press button. This function easily securely resolves saturation short sensing distances insufficient incident light long sensing distances. addition, response speed does change mode selection tuned power.
Conventional
Incident level Threshold High-speed mode Short-range mode Standard mode Incident level Appropriate
Modeless
proposal
approx. times
Press
Appropriate
approx. 1/25 times
Long-range mode
Saturation
Super-long-range mode
Saturation
Selected from various power mode according applications
Available without mode setting. Press MODE once adjust high incident levels appropriate.
Adoption Newly Developed 4-Element LEDs (Auto Power Control) Circuit Achieves Long-term Reliable Detection Highest Level Industry
long-term reliable detection highest level industry achieved with innovative circuit whose performance proved E3X-DA-N series newly developed high-power LEDs (4-element type) ensure super stable, long-term performance. Stable performance always available without ON/OFF setting circuit.
Conventional
3-element LEDs Incident level Incident level
Newly developed
4-element LEDs
Long-term stability
circuit
circuit
Time
Time
OMRON's Innovative Wire-saving Connector Inherited from E3X-DA-N
amplifier units with connectors supply power slave connectors master connector. This offers three following advantages. Greatly reduced wiring work Improved space usability unnecessity relay connectors Simple stock management unnecessity distinction between master slave amplifiers
Master connector
Wire-saving Connector Model
amplifier units connectable
Reduced Wiring Space Requirements Power Lines
<When using amplifier units>
Amplifier units with connectors
relay connector required
Power line Only output lines
power supplied from master unit slave units master connector.
lines
Clear
Amplifier units with cables
Relay connector installation work, cost space saved.
Output lines
Slave connector
Relay connector
Power lines
Optical communications Power supply
Power output lines required respectively.
lines
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Models available wide variety applications manufacturing sites
Industry Leading Amplifiers Loaded Small Body
amplifiers loaded mm-wide body. Space usability approximately doubled. addition, approximately energy saved. (compared value channel former model)
20mm 10mm
2-channel models
Liquid crystal board installation alignment check
2-channel models E3X-MDA
Simpler Digital Fiber Sensors
Simple Easy Single-function Models
Current value
UP/DOWN keys
Threshold value adjustment
Threshold value
Required performance functions have been reviewed from basic points improve high-performance hard-to-use digital models. Digital fiber sensors, used sense using volume type sensors, added basic functions such function digital display.
lock switch Operation mode selection switch TEACH
Threshold value teaching Yes/No: Teaching points detected Automatic: Automatic teaching feeding workpieces
High-speed High-resolution Analog Output Supports Wide Variety Applications
Analog Control Output
voltage range output according incident level (digital display). Wide variety applications possible including positioning control difference detection with multiple levels.
.Advanced Analog Output Models High-speed High Resolution
Detection modes switched accordance with applications. High-speed response (super-high-speed mode) supports positioning controls that require high-speed control.
Sheet Displacement
ON/OFF
Analog
Area Output Function Area Judgment Possible
quired multiple sensors.
.Advanced, Twinoutput Models
Area Output
Incident level
2000 1000
Tablet length detection
Only sensor enough area judgment height others that reSetting threshold values allows easy output inside outside range.
Threshold value Threshold value
Output
Time
Remote Input Function Sensors Controlled from Outside .Advanced, Externalinput Models
Remote settings teaching/power tuning/light possible with input signals. remote input function meets diversifying demands such remote settings made frequent teaching level change corresponding workpiece change remote operation check sensors before operation.
Sticker detection
Equipped with Industry's First Function that Resolves Problems Manufacturing Sites .Advanced Models
OMRON's unique algorism equipped Fixed Threshold Value Method (Conventional Models) Corrected Threshold Value Method (ATC Models) distinguish dust dirt change Threshold value 2000 2000 -10% 1800 relative workpieces. Automatic correction threshold Threshold value value values sensors accordance with changes Incident level Incident level absolute value (digital value) prevents malfunctions improves operating (digital value) Threshold value corrected every seconds rates machines. function especially Malfunctions prevented Malfunction Adjustment required effective applications that require highTime Time resolution detection.
Output Output
Monitoring range defined sensors according threshold values. Threshold values corrected this definition range.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Ordering Information
Amplifier Units
Amplifier Units with Cables
Item Single-function models Standard models Green Mark-detecting models (multiple color light sourc- Blue Infrared External-input models Twin-output models Advanced models function models Analog output models Timer, Response speed change Appearance Functions -Model output E3X-DA11SE-S E3X-DA11-S E3X-DAG11-S E3X-DAB11-S E3X-DAH11-S output E3X-DA41SE-S E3X-DA41-S E3X-DAG41-S E3X-DAB41-S E3X-DAH41-S E3X-DA41RM-S E3X-DA41TW-S E3X-DA41AT-S E3X-DA41AN-S
Remote setting, counter, differential E3X-DA11RM-S operation Area output, self-diagnosis, differential E3X-DA11TW-S operation (Threshold value automatic correcE3X-DA11AT-S tion) Analog output models E3X-DA11AN-S
2-channel models
AND/OR output
E3X-MDA11
E3X-MDA41
Amplifier Units with Connectors
Item Single-function models Standard models Green Mark-detecting models (multiple color light sourc- Blue Infrared External-input models Twin-output Advanced models models function models Appearance Functions -Timer, Response speed change Remote setting, counter, differential operation Area output, self-diagnosis, differential operation (Threshold value automatic correction) Model output E3X-DA6SE-S E3X-DA6-S E3X-DAG6-S E3X-DAB6-S E3X-DAH6-S E3X-DA6RM-S E3X-DA6TW-S E3X-DA6AT-S output E3X-DA8SE-S E3X-DA8-S E3X-DAG8-S E3X-DAB8-S E3X-DAH8-S E3X-DA8RM-S E3X-DA8TW-S E3X-DA8AT-S
2-channel models
AND/OR output
E3X-MDA6
E3X-MDA8
Ratings Specifications
Light source Single-function models Standard models Mark-de- E3X-DA@G-S 3X-DA@B-S tecting models E3X-DA@H-S Twin-output models External-inAdput models vanced models function models Analog output 2-channel models Control output/input ON/OFF Analog Input output output Only -main Response time Only main Only main -Power tuning -Timer -Functions Interference Differential prevention detection -counter -ATC
Green Blue Infrared
line) line)
Main lines) Only main Main main independent lines)
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Amplifier Unit Connectors (Order Separately)
Item Appearance Cable length conductors Master Connector Slave Connector E3X-CN22 E3X-CN12 E3X-CN21 Model E3X-CN11
Combining Amplifier Units Connectors
Amplifier Units Connectors sold separately. Refer following tables when placing order.
Model Single-function models Standard models Mark-detecting models (multiple color light sources) Advanced models 2-channel models
Amplifier Unit output E3X-DA6SE-S E3X-DA6-S E3X-DAG6-S E3X-DAB6-S E3X-DAH6-S E3X-DA6TW-S E3X-DA6RM-S E3X-DA6AT-S E3X-MDA6
output E3X-DA8SE-S E3X-DA8-S E3X-DAG8-S E3X-DAB8-S E3X-DAH8-S E3X-DA8TW-S E3X-DA8RM-S E3X-DA8AT-S E3X-MDA8
Applicable Connector (Order Separately) Master Connector Slave Connector
E3X-CN11
E3X-CN12
E3X-CN21
E3X-CN22
When Using Amplifier Units
Amplifier Units Units) Master Connector Slave Connectors
Mobile Console (Order Separately)
Appearance Model Remarks Mobile Console with Head, Cable, adapter provided accessories
E3X-MC11-SV2 (model number set)
E3X-MC11-C1-SV2
Mobile Console
E3X-MC11-H1
Head
E39-Z12-1
Cable (1.5
Note: E3X-MC11-SV2 Mobile Console E3X-DA-S/MDA-series Amplifier Units. E3X-MC11-SV2 upgraded version E3X-MC11-S that fully interchangeable with older model.
Accessories (Order Separately)
Mounting Bracket
Appearance Model E39-L143 Quantity
Plate
Appearance Model PFP-M Quantity
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Ratings Specifications
Amplifier Units
Type Single-function models Standard models Mark-detecting models (multiple color light sources) Green Blue Infrared E3X-DAG@-S E3X-DAB@-S E3X-DAH@-S Green (525 Blue (470 Infrared (870nm) Refer pages dimensions.
Item Model E3X-DA@SE-S E3X-DA@-S Light source (wavelength) (635 Power supply voltage ±10%, ripple (p-p) max. Power consumption max. (current consumption: max. power supply voltage VDC) Load power supply voltage: 26.4 VDC; NPN/PNP open collector; Control output load current: max.; residual voltage: max. Protection circuits Reverse polarity power supply connection, output short-circuit Super-high-speed mode -Operate: reset: -Operate/reset: Response High-speed mode time Standard mode Operate reset: High-resolution mode -Operate reset: Sensitivity setting Teaching manual method Power tuning -Light emission power reception gain, digital control method Select from OFF-delay, ON-delay, one-shot timer. Timer function 1-ms increments, 10-ms increments, 100-ms increments, s-increments) Automatic power High-speed control method emission current Functions control (APC) Zero-reset -Negative values displayed. (Threshold value shifted.) Initial reset Settings returned defaults required. Mutual interferPossible Units ence prevention Operation indicator Display Operation indicator (orange), Power Tuning indicator (orange) (orange) incident level Digital display Select from incident level threshold other patterns threshold Display orientation -Switching between normal/reversed display possible. Ambient illumination Incandescent lamp: 10,000 max. Sunlight: 20,000 max. (Receiver side) Ambient temperature range Ambient humidity range Insulation resistance Dielectric strength Vibration resistance Shock resistance Degree protection Connection method Weight (packed state) Case Materials Cover Accessories Operating: Groups Amplifiers: -25°C 55°C Groups Amplifiers: -25°C 50°C Groups Amplifiers: -25°C 45°C Storage: -30°C 70°C (with icing condensation) Operating storage: (with condensation) min. VDC) 1,000 50/60 minute Destruction: with 1.5-mm double amplitude each directions Destruction: m/s2, times each directions 60529 IP50 (with Protective Cover attached) Pre-wired amplifier unit connector Pre-wired model: Approx. Amplifier unit connector model: Approx. Polybutylene terephthalate (PBT) Polycarbonate (PC) Instruction manual
Communications disabled detection mode selected during super-high-speed mode, communications functions mutual interference prevention Mobile Console will function. output follows: Operate: reset: Mutual interference prevention used only Units power tuning enabled.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Advanced models 2-channel models External input models Twin output models function models Analog output models Item Model E3X-DA@RM-S E3X-DA@TW-S E3X-DA@AT-S E3X-DA@AN-S E3X-MDA@ Light source (wavelength) (635 Power supply voltage 10%, ripple (p-p) max. Power consumption 1,080mW max. (current consumption: max. power supply voltage VDC) Load power supply voltage: 26.4 VDC; NPN/PNP open collector; ON/OFF output load current: max.; residual voltage: max. Control output Voltage output: (Connection load min.) Temperature characteristics Control 0.3%F.S./ output Response speed/ -Analog output -repeat accuracy Super-high-speed mode: s/1.5%F.S. High-speed mode: s/1.5%F.S. Standard mode: ms/1%F.S. High-resolution mode: ms/0.75%F.S. Protection circuits Reverse polarity power supply connection, output short-circuit Operate: Operate reset: Operate reset: Operate reset: Operate reset: Super-high-speed mode reset: Response High-speed mode Operate reset: Operate reset: time Standard mode Operate reset: High-resolution mode Operate reset: Sensitivity setting Teaching manual method Power tuning Light emission power reception gain, digital control method Switchable between single edge double edge detection mode Differential deSingle edge: -tection Double edge: Select from OFF-delay, ON-delay, one-shot timer. Timer function 1-ms increments, 10-ms increments, 100ms increments, s-increments) Automatic power High-speed control method emission current control (APC) Zero-reset Negative values displayed. (Threshold value shifted.) Initial reset Settings returned defaults required. Functions Mutual interferPossible Possible Units ence prevention Units channels) Switchable between counter down Counter counter. -Set count: 9,999,999 External input setOutput setting (SeOutput setting Output setting ting (Select from lect from channel (Select from channel (Select from channel Analog output setteaching, power tunoutput, area output, output, AND, setting output, area outting (offset voltage ing, zero reset, light self-diagnosis outleading edge sync, put, self-diagnoadjustable) OFF, counter reput, error falling edge sync, sis.) set.) output) differential output) Operation indicator Operation indicator Operation indicator (orange), Power Operation indicator channel (orange), (orange), channel (orange), Display Tuning indicator (or- Operation indicator channel (orange) Power Tuning indiOperation indicator ange) cator (orange) channel (orange) Type
Communications disabled detection mode selected during super-high-speed mode, communications functions mutual interference prevention Mobile Console will function. output follows: Operate: reset: When counter enabled: operate reset respectively. When differential output selected output setting, second channel output operation reset respectively. Mutual interference prevention used only Units power tuning enabled. Mutual interference prevention used Units channels) power tuning enabled.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Advanced models External input models Twin-output models function models Analog output models Model E3X-DA@RM-S E3X-DA@TW-S E3X-DA@AT-S E3X-DA@AN-S Type Select from incident level threshold other patterns
2-channe models E3X-MDA@ Select from incident level channel incident level channel other patterns
Item
Digital display
Select from incident level threshold other patterns
Display orientation Ambient illumination (Receiver side) Ambient temperature range Ambient humidity range Insulation resistance Dielectric strength Vibration resistance Shock resistance Degree protection Connection method Weight (packed state) Case Materials Cover Accessories
Switching between normal/reversed display possible. Incandescent lamp: 10,000 max. Sunlight: 20,000 max. Operating: Groups Amplifiers: Groups Amplifiers: Groups Amplifiers: Storage: (with icing condensation) Operating storage: (with condensation) min. VDC) 1,000 50/60 minute Destruction: with 1.5-mm double amplitude each directions Destruction: m/s2, times each directions 60529 IP50 (with Protective Cover attached) Pre-wired amplifier unit connector Pre-wired model: Approx. Amplifier unit connector model: Approx. Polybutylene terephthalate (PBT) Polycarbonate (PC) Instruction manual
Amplifier Unit Connectors
Item Rated current Rated voltage Contact resistance Model max. mVDC max., max.) (The figure connection Amplifier Unit adjacent Connector. does include conductor resistance cable.) Destruction: times (The figure number insertions connection Amplifier Unit adjacent Connector.) Polybutylene terephthalate (PBT) Phosphor bronze/gold-plated nickel Approx. Approx. E3X-CN11/21/22 E3X-CN12
Mobile Console
Item Model E3X-MC11-SV2 E3X-DA-S E3X-MDA E3C-LDA E2C-EDA Charged with adapter Connected adapter
Applicable Sensors Power supply voltage Connection method
insertions Mate- Housing rials Contacts Weight (packed state)
Weight Approx. (Console (packed state) only:
Refer Instruction Manual provided with Mobile Console details.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Sensing Distance
Through-beam Models
Model Type E32-T11R/E32-T12R/E32-T15XR/ E32-TC200BR(B4R) E32-T14LR/E32-T15YR/E32-T15ZR E32-T21R/E32-T22R/E32-T222R/ E32-T25XR/E32-TC200FR(F4R) E32-T24R/E32-T25YR/E32-T25ZR E32-TC200/E32-T12/E32-T15X/ E32-TC200B(B4) E32-T14L/E32-T15Y/E32-T15Z E32-TC200A E32-TC200E/E32-T22/E32-T222/ E32-T25X/E32-TC200F(F4) E32-T24/E32-T25Y/E32-T25Z E32-T11/E32-T12B/E32-T15XB E32-T21/E32-T221B/E32-T22B E32-T25XB E32-T11U E32-T17L E32-TC200 E39-F1 E32-T11R E39-F1 E32-T11 E39-F1 E32-T14 E32-T11L/E32-T12L E32-T11L E39-F2 E32-T11R E39-F2 E32-T11 E39-F2 E32-T21L/E32-T22L E32-T223R Specialbeam models Ultracompact, ultrafine sleeve E32-T33-S5 E32-T333-S5 E32-T334-S5 E32-T22S Fine beam E32-T24S E32-T16PR E32-T16P E32-T16JR E32-T16J Area sensing E32-T16WR E32-T16W E32-T16 E32-M21 1,750 1,100 1,500 1,300 1,700 2,300 3,700 1,300 1,100 1,000 1,300 1,800 2,800 1,150 1,850 1,100 1,100 1,400 2,400 1,100 1,800 1,200 Highresolution mode 1,000 E3X-DA@-S Standard mode Highspeed mode Superhighspeed mode Highresolution mode E3X-MDA@ Standard mode Highspeed mode 6,500 2,400 1,600 1,500 1,450 Superhighspeed mode 4,000 1,500
(Unit:
Flexible (new standard)
Standard models
Standard
Breakresistant Fluorine coating
Longdistance, high power
20,000*1 20,000*1 10,000 4,000*2 4,000*2 2,600 4,000*2 3,700 2,400 4,000*2 3,600 2,300 4,000*2 3,400 2,250 1,700 1,330 2,500 1,900 1,250
4,000 13,000 10,000 1,500 4,000 3,700 3,100 2,400 3,000 2,300 2,900 2,200 1,100 1,600 1,250
optical fiber E32-T17L long each side, value 20,000 optical fiber long each side, sensing distance 4,000
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Model Type E32-T51 E32-T54 E32-T81R-S E32-T61-S E39-F2 E32-T61-S E39-F1 E32-T84S-S E32-T61-S E32-T11F E32-T12F E32-T14F E32-T51F E32-T81F-S E32-T51V E32-T51V E39-F1V E32-T54V E32-T54V E39-F1V E32-T84SV Highresolution mode 1,000 4,000 1,750 2,500 4,000* 1,800 1,350 E3X-DA@-S Standard mode 3,400 1,300 2,000 3,000 1,400 1,000 Highspeed mode 2,200 1,300 2,000 Superhighspeed mode Highresolution mode 3,000 1,100 1,600 2,600 1,190 E3X-MDA@ Standard mode 2,200 1,300 2,000 Highspeed mode 1,450 1,300 Superhighspeed mode
Heatresistant
Environment resistive models
Chemical resistant
Vacuum resistant
optical fiber E32-T12F long each side, sensing distance 4,000
Reflective Models
Model Type E32-D11R/E32-D12R/E32-D15XR/ E32-DC200BR(B4R) E32-D14LR E32-D15YR/E32-D15ZR E32-D211R/E32-D21R/E32-D22R/ E32-D25XR/E32-DC200FR(F4R) E32-D24R E32-D25YR/E32-D25ZR E32-DC200/E32-D15X/ E32-DC200B(B4) E32-D12 E32-D14L E32-D15Y/E32-D15Z E32-D211/E32-DC200E/E32-D22/ E32-D25X/E32-DC200F(F4) E32-D24 E32-D25Y/E32-D25Z E32-D11/E32-D15XB E32-D21B/E32-D221B E32-D21/E32-D22B E32-D25XB E32-D11U Highresolution mode E3X-DA@-S Standard mode SuperHighhighspeed speed mode mode Highresolution mode
(Unit: E3X-MDA@ Standard mode Highspeed mode Superhighspeed mode
Flexible (new standard)
Standard models
Standard
Breakresistant Fluorine coating
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Model Type Highresolution mode E32-D16 Long distance, high power 1,000 E3X-DA@-S Standard mode SuperHighhighspeed speed mode mode Highresolution mode E3X-MDA@ Standard mode Highspeed mode Superhighspeed mode
E32-D11L
E32-D21L/E32-D22L
Ultracompact, ultrafine sleeve
E32-D33
E32-D331 E32-CC200R E32-CC200 E32-D32L E32-C31/E32-D32
Specialbeam models
E32-C42 E39-F3A Coaxial/small E32-D32 E39-F3A spot E32-C41 E39-F3A-5 E32-C31 E39-F3A-5 E32-C41 E39-F3B E32-C31 E39-F3B E32-C31 E39-F3C Area sensing E32-D36P1 Retroireflective E32-R21 E39-R3 (provided) E32-R16 E39-R1 (provided) E32-L25/E32-L25A E32-L24S E32-L24L E32-L25L E32-L86 E32-L16 E32-D51 E32-D81R-S E32-D61-S E32-D73-S E32-D12F E32-D14F
Spot diameter variable range distances range Spot diameter variable range distances range 0.1-mm dia. spot distance 0.5-mm dia. spot distance 0.2-mm dia. spot distance 0.5-mm dia. spot distance Spot diameter max. distances range 1,500 (center (center 7.2)
Convergentreflective
Environmentresistive models
Heatresistant
Chemicalresistant
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Application-specific Models
Model Type Highresolution mode Label detection E32-G14 E32-T14 E32-L25T E32-D36T Liquid-level detection E32-A01 E32-A02 E32-D82F1(F2) Applicationspecific models E32-L16 Glasssubstrate alignment E32-A08 E32-A07E1(E2) E32-L66 Glasssubstrate Mapping E32-A09/E32-A09H E32-A09H2 E32-A03/E32-A03-1 Wafer mapping E32-T24S E32-A04/E32-A04-1 1,150 1,750 1,300 4,000* 3,400 2,250 E3X-DA@-S Standard mode SuperHighhighspeed speed mode mode 2,900 2,200 1,450 Highresolution mode (Unit: E3X-MDA@ Standard mode Highspeed mode Superhighspeed mode
Applicable tube: Transparent tube with diameter range recommended wall thickness Applicable tube: Transparent tube restriction diameter) Applicable tube: Transparent tube with diameter 3.2, 6.4, recommended wall thickness Applicable tube: Transparent tube with diameter range recommended wall thickness Liquid-contact model -250 1,100 -250
optical fiber E32-T14 long each side, sensing distance 4,000
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Green, Blue, Infrared Light Sources
Model Type E32-T11R/E32-T12R/E32-T15XR/ E32-TC200BR(B4R) E32-T14LR/E32-T15YR/ E32-T15ZR Standard E32-TC200/E32-T12/E32-T15X/ E32-TC200B(B4) E32-T14L/E32-T15Y/E32-T15Z Special beam E32-T11L/E32-T12L E32-D11R/E32-D12R/E32-D15XR/ E32-DC200BR(B4R) E32-D14LR E32-D15YR/E32-D15ZR Standard E32-DC200/E32-D15X/ E32-DC200B(B4) E32-D14L E32-D15Y/E32-D15Z E32-D11L E32-CC200R Special beam E32-CC200 E32-D32L E32-C31/E32-D32 Label detection E32-T14 E32-G14 E3X-DAG@-S/DAB@-S HighSuperStan- Highresohighdard speed lution speed mode mode mode mode Refer Series details Fiber Units. Highresolution mode 1,800 (Unit: E3X-DAH@-S Standard mode 1,200 Highspeed mode Superhighspeed mode
Throughbeam models
Reflective models
Applicationspecific models
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Output Circuit Diagrams
Output
Model Operation mode Timing charts
Incident light incident light Operation indicator (orange) Output transistor Load Operate (relay) Reset
(Between brown black leads)
Operation selector
Output circuit
E3X-DA11-S E3X-DA6-S E3X-DAG11-S E3X-DAG6-S E3X-DAB11-S E3X-DAB6-S E3X-DA11SE-S E3X-DA6SE-S
Light-ON
LIGHT (L-ON)
Display
Power tuning indicator (orange)
Operation indicator (orange)
Brown Black Load Control output Blue
Dark-ON
Incident light incident light Operation indicator (orange) Output transistor Operate Load Reset (relay)
(Between brown black leads)
Photoelectric Sensor main circuit
DARK (D-ON)
Light-ON E3X-DA11TW-S E3X-DA6TW-S E3X-MDA11 E3X-MDA6 E3X-DA11AT-S E3X-DA6AT-S Dark-ON
CH1/ Incident light incident light Operation indicator (orange) Output transistor Operate Load Reset (relay)
(Between brown black leads)
LIGHT (L-ON)
Display
Operation indicator (orange)
Operation indicator (orange)
Brown Black
Load Load
CH1/ Incident light incident light Operation indicator (orange) Output transistor Operate Load (relay) Reset
(Between brown black leads)
Photoelectric Sensor main circuit
Orange Control output Blue
Control output
DARK (D-ON)
Light-ON E3X-DA11RM-S E3X-DA6RM-S Dark-ON
Incident light incident light Operation indicator (orange) Output transistor Operate Load (relay) Reset
LIGHT (L-ON)
Display Power tuning indicator (orange)
Operation indicator (orange)
Brown Black Control output Orange External input
Load
(Between brown black leads)
Operation indicator (orange)
Output transistor Operate Load Reset (relay)
Photoelectric Sensor main circuit
DARK (D-ON)
Blue
(Between brown black leads)
Incident light incident light Operation indicator (orange) Output transistor Load Operate (relay) Reset
(Between brown black leads)
Light-ON
LIGHT (L-ON)
E3X-DA11AN-S
Display Power tuning indicator (orange)
Operation indicator (orange)
Brown Black Control output Analog Orange output models Blue
Load
Incident light incident light Operation indicator (orange) Output transistor Load Operate (relay) Reset
(Between brown black leads)
Photoelectric Sensor main circuit
Load 10kmin
Dark-ON
DARK (D-ON)
Note: ON/OFF regions when areas settings used with E3XDA@TW-S follows: LIGHT when incident level between thresholds channels DARK when incident level between thresholds channels Timing Charts Timer Function Settings Time)
Control Output (AND, Sync) Timing Chart Timer Settings Time)
(AND) (OR) (sync) delay (AND) delay (AND) One-shot (AND)
delay
Incident light incident light L-ON D-ON
delay
Incident light incident light L-ON
One-shot
Incident light
incident light L-ON D-ON
D-ON
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Output
Model Operation mode Timing chart
Incident light incident light Operation indicator (orange) Output transistor Load (relay) Operate Reset
(Between blue black leads)
Operation selector
Output circuit
E3X-DA41-S E3X-DA8-S E3X-DAG41-S E3X-DAG8-S E3X-DAB41-S E3X-DAB8-S E3X-DA41SE-S E3X-DA8SE-S
Light-ON
LIGHT (L-ON)
Display
Power tuning indicator (orange)
Operation indicator (orange)
Brown Control output Black
Load
Incident light incident light Operation indicator (orange) Output transistor Load Operate (relay) Reset
(Between blue black leads) Incident light CH1/ incident light Operation indicator (orange)
Photoelectric Sensor main circuit
Dark-ON
DARK (D-ON)
Blue
Light-ON E3X-DA41TW-S E3X-DA8TW-S E3X-MDA41 E3X-MDA8 E3X-DA41AT-S E3X-DA8AT-S Dark-ON
Output transistor
Load (relay)
Reset
(Between blue black leads)
LIGHT (L-ON)
Display
Operation indicator (orange)
Operation indicator (orange)
Operate
Photoelectric Sensor main circuit
Brown Control output Black Orange
Control output
CH1/ Incident light incident light Operation indicator (orange) Output transistor Load (relay) Operate Reset Incident light incident light Operation indicator (orange) Output transistor Load Operate (relay) Reset
(Between blue black leads) (Between blue black leads)
Load
Load
DARK (D-ON)
Blue
Light-ON
LIGHT (L-ON)
Display
Power tuning indicator (orange)
Operation indicator (orange)
Brown External input Control output
Load
E3X-DA41RM-S E3X-DA8RM-S
Incident light incident light Operation indicator (orange)
Photoelectric Sensor main circuit
Orange Black Blue
Dark-ON
Output transistor
Load (relay)
Reset
(Between blue black leads)
DARK (D-ON)
Operate
Incident light incident light Operation indicator (orange) Output transistor Load (relay) Operate Reset
(Between blue black leads)
Light-ON
LIGHT (L-ON)
Display
Power tuning indicator (orange)
Operation indicator (orange)
Brown Analog Orange output models Control output Black Blue
Load Load 10kmin
E3X-DA41AN-S
Incident light incident light Operation indicator (orange) Output
Photoelectric Sensor main circuit
Dark-ON
transistor
Load (relay)
DARK (D-ON)
Reset
(Between blue black leads)
Operate
Note: ON/OFF regions when areas settings used with E3X-DA@TW-S follows: LIGHT when incident level between thresholds channels DARK when incident level between thresholds channels
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Nomenclature
Amplifier Units
E3X-DA@-S E3X-DA@RM-S E3X-DA@AN-S
Main Display (Red) Incident level, function, etc. Lock lever Locks fiber.
Sub-Display (Green) Threshold, function settings, etc.
E3X-DA@TW-S E3X-DA@AT-S E3X-MDA@
Operation Keys Function setting operations DOWN MODE Main Display (Red) Incident level, function, etc. Lock lever Locks fiber. Sub-Display (Green) Threshold, function settings, etc. Operation Keys Function setting operations DOWN MODE
Operation Indicator (orange) when output when output OFF.
Power Tuning Indicator Power tuning set.
Operation Selector switch between Light Dark modes. Mode Selector select mode.
Operation indicator channel (orange) when output when output OFF.
Channel Selector switch between channels Operation indicator channel (orange) Mode Selector when output select mode. when output OFF.
Safety Precautions
Refer Warranty Limitations Liability.
WARNING
This product designed rated ensuring safety persons either directly indirectly. such purposes. Removing Connectors Slide slave Amplifier Unit(s) which Connector removed away from rest group. After Amplifier Unit(s) been separated, press down lever Connector remove attempt remove Connectors without separating them from other Amplifier Units first.)
Press down Lever
Precautions Correct
product atmospheres environments that exceed product ratings.
Amplifier Unit
Designing Operation after Turning Power
Sensor ready detect within after power supply turned Sensor load connected separate power supplies, sure turn Sensor first.
Remove
Adding Removing Amplifier Units
Adding Amplifier Units Mount Amplifier Units time onto track.
Mounting Connecting Disconnecting Connectors
Mounting Connectors Insert Master Slave Connector into Amplifier Unit until clicks into place.
Slide Amplifier Units together, line clips, press Amplifier Units together until they click into place.
Insert
Attach protector seals (provided accessories) sides master slave connectors that connected.
Click into place
Seal
Seal
Note: Attach seals sides with grooves.
Removing Amplifier Units Slide Amplifier Units away from each other, remove from track time. attempt remove Amplifier Units from track without separating them first.)
Note: specifications ambient temperature will vary according number Amplifier Units used together. details, refer Ratings Specifications. Always turn power supply before joining separating Amplifier Units.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Mounting Plate (PFP-M)
Plate should used there possibility Amplifier Unit moving, e.g., vibration. Mobile Console going mounted, connect Plate direction shown following diagram.
Fibers That Cannot Free-Cut (with Sleeves)
Plate
Disconnecting Fibers Remove protective cover raise lock lever pull fibers.
Mounting Mobile Console Head
Leave least between nearest Amplifier Unit Mobile Console head.
Locked Unlocked Protective cover
Fiber Connection
Amplifier Unit lock button easy connection Fiber Unit. Connect disconnect fibers using following procedures: Connection Open protective cover, insert fibers according fiber insertion marks side Amplifier Unit, lower lock lever.
Note: maintain fiber properties, confirm that lock released before removing fibers. sure lock unlock lock button within ambient temperature range between
Adjusting Mutual Interference Protection Function
There some instability digital display values light from other sensors. this occurs, decrease sensitivity (i.e., decrease power increase threshold) perform stable detection.
EEPROM Writing Error
Lock button Protective cover Unlocked Insertion position
Locked
data written EEPROM correctly power failure static-electric noise, initialize settings with keys Amplifier Unit. ERR/EEP will flash display when writing error occurred.
Optical Communications
Fiber insertion mark Fiber
Several Amplifier Units slid together used groups. not, however, slide Amplifier Units attempt remove Amplifier Units during operation.
Fibers with E39-F9 Attachment
Others Protective Cover
Always keep protective cover place when using Amplifier Unit.
Mobile Console
E3X-MC11-SV2 Mobile Console E3X-DA-S-series Amplifier Units.
Fiber Unit
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Dimensions
Amplifier Units
Amplifier Units with Cables E3X-DA11-S E3X-DA41-S E3X-DAG11-S E3X-DAG41-S E3X-DAB11-S E3X-DAB41-S E3X-DA11RM-S E3X-DA41RM-S E3X-DA11TW-S E3X-DA41TW-S E3X-DA11SE-S E3X-DA41SE-S E3X-DA11AT-S E3X-DA41AT-S E3X-DA11AN-S E3X-DA41AN-S E3X-MDA11 E3X-MDA41
Operation indicator Round Power tuning indicator Oblong Operation indicator channel
(Unit:
Main display
Sub-display
Vinyl-insulated round cable Standard length:
(E3X-DA@-S)
(E3X-MDA@)
*Cable Specifications
E3X-DA11-S -DA41-S -DAG11-S -DAG41-S -DAB11-S -DAB41-S E3X-DA11TW-S -DA41TW-S -DA11RM-S -DA41RM-S E3X-MDA11 -MDA41 With Mounting Bracket Attached
32.8 29.8 15.1 =11.7 12.15 3.25 11.7
4-dia., 3-conductor (Conductor cross section: mm2, insulator diameter:
4-dia., 4-conductor (Conductor cross section: mm2, insulator diameter, 4-dia., 2-conductor (Conductor cross section: mm2, insulator diameter:
Mounting Bracket also used this side.
Two, dia. 5.65 5.65 12.5 Four, dia.
(E3X-DA@-S)
(E3X-MDA@)
28.1 18.7 44.3 Two, dia. holes
34.8
Hole optical communications Mounting Bracket (E39-L143) SUS304 stainless steel
Two,
28.1
Mounting Holes
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Amplifier Units with Connectors E3X-DA6-S E3X-DA8-S E3X-DAG6-S E3X-DAG8-S E3X-DAB6-S E3X-DAB8-S E3X-DA6RM-S E3X-DA8RM-S E3X-DA6TW-S E3X-DA8TW-S E3X-DA6SE-S E3X-DA8SE-S E3X-DA6AT-S E3X-DA8AT-S (E3X-DA@-S) E3X-MDA6 E3X-MDA8
Operation indicator Round Power tuning indicator Oblong Operation indicator channel
Main display
Sub-display
(E3X-MDA@)
With Mounting Bracket Attached
11.7
Mounting Bracket also used this side. Cable Diameters
32.8 29.8 15.1 =11.75 12.15 3.25
E3X-CN22 conductors) E3X-CN21 conductors) E3X-CN11 conductors) E3X-CN12 conductor)
4.0-mm dia.
2.6-mm dia.
Connector
Two, dia. 5.65 5.65 12.95 Four, dia. Dia.
(E3X-DA@-S)
(E3X-MDA@)
28.1 18.7 44.3 Two, 3.2-dia. holes
34.8
Hole optical communications Mounting Bracket (E39-L143) SUS304 stainless steel
Two,
Mounting Holes
28.1
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Amplifier Unit Connectors
Master Connectors E3X-CN11 E3X-CN21
2,000+50 10.7 14.4 dia.
30±2 10±2 50+5 *E3X-CN11: 4-dia. vinyl-insulated round cable with conductors (Conductor cross section: mm2, Insulator diameter: E3X-CN21: 4-dia. vinyl-insulated round cable with conductors (Conductor cross section: mm2, Insulator diameter:
15.1
Slave Connectors E3X-CN12 E3X-CN22
14.4
2,000+50 10.7 E3X-CN12: dia. E3X-CN22: dia.
15.1
30±2 50+5
10±2
*E3X-CN12: 2.6-dia. vinyl-insulated round cable with conductor (Conductor cross section: mm2, Insulator diameter: E3X-CN22: 4-dia. vinyl-insulated round cable with conductors (Conductor cross section: mm2, Insulator diameter:
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
E3X-DA-S/MDA
Mobile Console
E3X-MC11-SV2
Mobile Console Mobile Console Head
adapter jack
Communications jack
Menu indicators
Optical communications connection indicator
52.8
Communications jack
Channel indicator
(38.2) 31.8 13.2 13.1 16.3 28.8
Sensor operation indicator Main display
12.3
17.3 24.3 Channel buttons 30.3 27.7
Sub-display
RIGHT ball plunger LEFT ESC/PWR DOWN
Optical communications position
31.2 36.7 51.3
Operation keys
Battery indicators
Refer Series details Fiber Units.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures:
E3X-DA-S/E3X-MDA
Photoelectric Sensors
Operation Reference
Main Display (Red)
Displays incident light level function name.
Sub-Display (Green)
Displays threshold function settings.
Operation Keys
Used functions. DOWN MODE
SET/RUN Mode Selector Switch
Used select mode.
SET/RUN mode Detection/ adjustment
Operation keys
DOWN
Operation Adjusting thresholds
Displays Main display Sub-display Incident level Threshold
Remarks Page Refer Setting Thresholds Manually. Used execute power tuning various teaching operations. Page Refer Adjusting Power.
MODE
Executing user-specified functions (factory-set power tuning)
(Factory-set RUN)
Function settings
DOWN
Teaching changing setting details
Setting item
Setting Page Refer Teaching Threshold.
Switching settings
MODE
Page Refer Setting Functions Mode.
SET/RUN mode
Operation keys
Operation Locking unlocking keys
Displays Main display Sub-display
Remarks Locks operation prevent incorrect operation. Page Refer Convenient Functions. Returns system default settings. Page Refer Convenient Functions.
(Factory-set RUN)
MODE
Initialization
DOWN
INIT
YES?
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures: Photoelectric Sensors
Setting Operation Mode
operation mode with Mode Selector Switch. Operation mode L-ON D-ON Operation
(Factory-set)
restore default power settings:
(See note.)
DOWN MODE
Press both
Light Dark
PTUN
"OFF" will flash twice.
operation mode mode. Refer Setting Functions Mode page
E3X-DA@TW-S/E3X-DA@AT-S/E3X-MDA (Same Adjustments): Channel Selector Switch desired channel before making adjustments settings.
Power Tuning indicator will when default setting been restored.
Light level
Threshold
Adjusting Power (RUN Mode)
current incident light level adjusted near power tuning target value (default: 2,000).
*Setting Errors error occurred following displays appears after progress displayed.
Display
Error
Flashes twice Over Error incident light level power tuning OVER target value. Flashes twice Bottom Error incident light level high power tuning BOtarget value.
Action
power will tuned. power increased approximately times incident light value. power will turned minimum level. power decreased down approximately 1/25th incident light value.
*Confirm that MODE setting PTUN (power tuning). default setting PTUN. Refer Setting Functions Mode page power tuning executed while selected detection function, minimum power will set.
PTUN
PTUN
SET/RUN Mode Selector Switch RUN.
(Factory-set RUN)
Light level
Threshold (default)
Note: Press DOWN right after pressing MODE Key.
MODE
Setting Thresholds Manually (RUN Mode)
threshold manually. threshold also adjusted manually after teaching fine-tune
Mode Selector Switch RUN.
(Factory-set RUN)
DOWN
PTUN Progress
Release after progress displayed.
Display changes after specific time.
Light level
Threshold (default)
Power tuning target value
Increases threshold. Threshold
Decreases threshold.
Power Tuning indicator will light when adjustment been completed.
Light level
*Even display method changed, threshold will appear sub-display when pressed.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures: Photoelectric Sensors
Teaching Threshold (SET Mode)
*There four methods that used teaching, described below. method most suitable application. Teaching (with/without workpiece teaching automatic teaching) performed mode. operating procedures, refer Instruction Sheet provided with product. error occurred OVER, NEAR displayed sub-display. that occurs, repeat operation from beginning.
4-3. Teaching Reflective Fiber Unit without Workpiece
value about greater than incident light level threshold. This method ideal when using Reflective Fiber Unit detect workpieces that detection influenced great degree dust other environmental factors.
SET/RUN Mode Selector Switch SET.
Light level Threshold
4-1. Setting Threshold Maximum Sensitivity
threshold maximum sensitivity. This method ideal when using Through-beam Fiber Unit detect workpieces that detection influenced great degree dust other environmental factors.
SET/RUN Mode Selector Switch SET.
Light level Threshold
DOWN
With workpiece:
TECH
Press either
will displayed.
DOWN
Press either
DOWN
FULL
Threshold
Press either
threshold that will flash twice. threshold that will flash twice. previous display will return when setting been completed.
Light level Threshold
RFCH
Threshold
4-2. Teaching Through-beam Fiber Unit without Workpiece
value about less than incident light level threshold. This method ideal when detecting very small differences light level, such when detecting very fine workpieces transparent workpieces like transparent fibers.
SET/RUN Mode Selector Switch SET.
Light level Threshold
previous display will return when setting been completed.
Light level
Threshold
4-4. Teaching with without Workpiece
points, with without workpiece, detected, intermediate point threshold.
SET/RUN Mode Selector Switch SET.
Light level Threshold
DOWN
DOWN
With workpiece:
TECH
Press either
With workpiece:
Workpiece TECH
Press either
will displayed.
will displayed.
DOWN
With workpiece:
RFCH Threshold
Press either
THRU
Threshold
threshold that will flash twice.
threshold that will flash twice.
previous display will return when setting been completed.
Light level
Threshold
previous display will return when setting been completed.
Light level
Threshold
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures: Photoelectric Sensors
Setting Functions Mode
Standard Mark Detection Models
E3X-DA@-S
*The function transition boxes show default settings. *More functions displayed depending detailed settings.
Moving between Functions
SET/RUN Mode Selector Switch SET.
Refer Teaching Threshold page
Teaching
Detection
change response speed detection precision)
Timer
timer setting)
MODE
Display orientation
reverse orientation display.)
Display switch
change display method)
MODE
change function MODE during operation)
Functions
DOWN
DOWN Keys change settings.
Function
Detection Timer Time (timer enabled) MODE
Setting (display)
Super-high-speed: High-speed: Standard: High-precision: Timer disabled: ON-delay timer: OFF-delay timer: One-shot timer:
Description
Used change response speed detection precision. Used enable disable timers.
1-ms increments, 5-ms increments, Used change timer settings when timers enabled. timer from 5000 100-ms increments, increments Executes power tuning: Executes zero reset: With/without workpiece teaching: Automatic teaching: Used change function MODE during operation. Used target values during power tuning. Refer Adjusting Power page Used display incident light level threshold.
Light level Threshold
Power tuning target value Setting range: 3,900 (increments 100) (performing power tuning) Maximum power
light level Threshold
Used display incident light level percentage threshold threshold.
Fixed interval
PEAK
BO
Used display peak bottom levels incident light within time. (Updated every display incident light peak level incident light bottom level. (Refreshed when output turns OFF.) Analog display. current detection status displayed analog bar. will lengthen from right status reached. (ON: Red, OFF: Green)
Display switch
L-PE
D-BT
Detection status
Current light level
PEAK
Fixed interval
Current light level Peak light level
Used display current incident light level peak incident light level. Display changes fixed interval. Used display incident light level channel.
Light level
Channel
Display orientation
Normal display:
Up/down reversed display:
Used reverse orientation display.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures: Photoelectric Sensors
Setting Functions Mode
Advanced (Twin-output, ATC) Models
E3X-DA@TW-S E3X-DA@AT-S
*The function transition boxes show default settings. *More functions displayed depending detailed settings.
Moving between Functions
SET/RUN Mode Selector Switch SET.
Refer Teaching Threshold page
Teaching
Operation mode
operation mode)
Detection
change response speed detection precision)
Timer
timer setting)
MODE
enable disable ATC)
Display orientation
reverse orientation display.)
Display switch
change display method)
MODE
change function MODE during operation)
Twin outputs
change output channel
(only models with ATC)
Functions
DOWN
(Only functions supported standard models listed. information basic functions, refer information standard models.)
DOWN Keys change settings.
Function
Operation mode Light
Setting (display)
Dark
Description
Refer Setting Operation Mode page
Detection
Differential edge (differtial operation selected)
Super-high-speed: High-speed: Standard: High-precision: Differential operation: (advanced models only) Single edge: Double edge:
Used change response speed detection precision. Used edge detected. Used differential response time. Used change output channel This setting disabled differential operation detection function. (Alarm outputs always used differential operation.) Used enable disable ATC.
Differential time
Single Double error output: (ATC models only), Output each channel: Output level between thresholds: Self-diagnosis output: enabled: disabled:
Twin outputs
(E3X-DA@AT-S only) Setting Power-ON (ATC
setting: start processing: Power tuning start processing:
Used processing performed when power turned
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures: Photoelectric Sensors
Setting Functions Mode
Advanced (External Input) Models
E3X-DA@RM-S
*The function transition boxes show default settings. *More functions displayed depending detailed settings.
Moving between Functions
SET/RUN Mode Selector Switch SET.
Refer Teaching Threshold page
Teaching
Detection
change response speed detection precision)
Timer
timer setting)
External input
change function controlled external input.)
MODE
change function MODE during operation)
MODE
External input batch setting
(Refer Instruction Sheet provided with product.)
Counter
counter function.)
External input memory
(Refer Instruction Sheet provided with product.)
Display orientation
reverse orientation display.)
Display switch
change display method)
Functions (Only functions supported standard models listed. information basic functions, refer information standard models.)
DOWN
DOWN Keys change settings.
Function
Detection
Differential edge (differtial operation selected)
Setting (display)
Super-high-speed: High-precision: Single edge:
Description
High-speed: Standard: Used increase response speed detection Differential operation: (advanced models only) precision. Double edge: Used edge detected. Used differential response time.
Differential time
Single Double Through-beam, no-workpiece teaching: Reflective, no-workpiece teaching: With/Without-workpiece teaching: Automatic teaching: Power tuning: Zero reset: Light OFF: Counter reset:
External input
Used change function controlled external input. (Refer Instruction Sheet provided with product.)
Display switch (Settings added.) External input memory
Used display counter value.
Count
Write results EEPROM: Don't write results:
Used writing results. (Refer Instruction Sheet provided with product.) Used counter function. Used counter value when counter function enabled. Used linked Amplifiers same time using external input.
Counter Count External input batch setting
Counter disabled: Count incremented when output turns Count decremented when output turns Setting range: 9,999,999 Only Sensor that receives external input: linked Sensors:
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures: Photoelectric Sensors
Setting Functions Mode
Two-channel Models
E3X-MDA
*The function transition boxes show default settings. *More functions displayed depending detailed settings.
Moving between Functions
SET/RUN Mode Selector Switch SET.
Refer Teaching Threshold page
Teaching
Operation mode
operation mode)
Detection
change response speed detection precision)
Timer
timer setting)
MODE
Display orientation
reverse orientation display.)
Display switch
change display method)
MODE
change function MODE during operation)
Output setting
select output details channel
Functions (Only functions supported standard models listed. information basic functions, refer information standard models.)
DOWN
DOWN Keys change settings.
Function
Operation mode Light
Setting (display)
Dark
Description
Refer Setting Operation Mode page
Output setting
Each channel: AND: Rising edge synchronization: Falling edge synchronization: Differential operation: Timer disabled: ON-delay timer:
Used change output details channel
Timer function output setting Timer time
OFF-delay timer: One-shot timer:
Used enable disable timer function output settings channel
1-ms increments, 5-ms increments, Used change timer setting when timer enabled. timer from 5,000 100-ms increments, increments
Note: operation mode timer function each channel. setting will executed channels specified using Channel Selector Switch.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Operating Procedures: Photoelectric Sensors
Convenient Functions
6-1. Zeroing Digital Display (Zero Reset)
incident light level main display
*Change function 0RST (zero reset) with MODE Key. default setting PTUN.
Refer Setting Functions Mode page
SET/RUN Mode Selector Switch RUN.
Factory setting
MODE
MODE
reset again:
(See note.)
return original value incident light level:
DOWN
MODE
Press both
6-2. Locking Keys (Key Lock)
operations disabled.
SET/RUN Mode Selector Switch RUN.
Factory setting
(See note.)
MODE
Press both
"ON" will flash twice operations will disabled.
MODE
(See note.)
Press both
release lock:
"OFF" will flash twice operations will disabled.
pressed while operations locked, "LOC" will flash twice display indicate that operations have been disabled. Note: Press DOWN right after pressing MODE Key.
6-3. Initializing Settings (Initial Reset)
settings returned their original default settings.
(See note.)
SET/RUN Mode Selector Switch SET.
DOWN
Press both
INIT
YES?
INIT
MODE
DOWN MODE
Settings initialized.
Operation canceled.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Photoelectric Sensors Technical Guide
General Precautions
precautions individual products, refer Safety Precautions individual product information.
WARNING
These Sensors cannot used safety devices presses other safety devices used protect human life. These Sensors designed applications sensing workpieces workers that affect safety.
Precautions Safe
ensure safety, always observe following precautions.
Wiring
Item Typical examples
Power Supply Voltage
voltage excess operating voltage range. Applying voltage excess operating voltage range, applying power (100 greater) Sensor cause explosion burning.
Three-wire Output Sensors
Load Black Blue
Brown Sensor
Load Short-circuiting
short-circuit load. Doing cause explosion burning.
Three-wire Output Sensor
Two-wire Sensors Example: E3E2
Brown Sensor Blue Load (Load short circuit)
Brown Sensor Blue Black
Load (Load short circuit)
Incorrect Wiring
reverse power supply polarity otherwise wire incorrectly. Doing cause explosion burning.
Three-wire Output Sensors Example: Incorrect Polarity
Brown Sensor Blue Load Black
Three-wire Output Sensors Example: Incorrect Polarity Wiring
Load Brown Sensor Blue Black Sensor Brown Load Blue Black
Connection without load
power supply connected directly without load, internal elements burst burn. sure insert load when connecting power supply.
Three-wire Output Sensors
Brown 24VDC
2-wire Sensors Example: E3E2 etc.
Sensor
Brown Black Sensor Blue Blue
Operating Environment
Sensor environment where there explosive inflammable gases. Sensor environments where cables become immersed other liquids where liquids penetrate Sensor. Doing result damage from burning fire, particularly liquid flammable.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Photoelectric Sensors Technical Guide
Precautions Correct
Design Power Reset Time
Sensor will ready detect within approximately after power turned Sensor load connected separate power supplies, turn Sensor power before turning load power. exceptions this rule indicated Safety Precautions individual product information.
Turning Power
output pulse generated when power turned OFF. recommended that load load line power turned before Sensor power turned OFF.
Power Supply Types
unsmoothed full-wave half-wave rectifying power supply cannot used.
Mutual Interference
Mutual interference state where output unstable because Sensors affected light from adjacent Sensors. following measures taken avoid mutual interference. Countermeasure Concept Sensor with interference prevention function. Through-beam Sensors Reflective Sensors
Sensors mounted close proximity, Sensors with interference prevention function. fewer Sensors: E3X-DA@-S, E3X-MDA, E3C-LDA Fiber Sensors Performance, however, will depend conditions. Refer pages E3X-DA-S/E3X-MDA E3C-LDA. fewer Sensors: E3X-NA Fiber Sensors fewer Sensors: E3T, E3Z, E3ZM, E3ZM-C, E3S-C, E3G-L1/L3, E3S-C Built-in Amplifier Photoelectric Sensors (except Through-beam Sensors) Photoelectric Sensor with separate amplifier mutual interference prevention polarizing filter installed only E3Z-TA allow close-proximity mounting Sensors. Mutual Interference Prevention Polarizing Filter: E39-E11 Check parallel movement distance range catalog, verify distance between adjacent Sensors, install Sensors accordingly distance least times parallel movement distance range. workpieces move from near, chattering occur vicinity operating point. this type application, separate Sensors least times operating range.
Workpiece Workpiece Sensor
Install inference prevention filter. Separate Sensors distance where interference does occur.
Sensor
Alternate Emitters Receivers.
Close mounting Sensors possible alternating Emitters with Receivers zigzag fashion Sensors). However, workpieces close Photoelectric Sensors, light from adjacent Emitter received cause Sensor change incident light state.
Emitter
Workpiece Receiver Receiver
Emitter
Offset optical axes.
there possibility that light from another Sensor enter Receiver, change position Emitter Receiver, place light barrier between Sensors, take other measures prevent light from entering Receiver. (Light enter even Sensors separated more than sensing distance.)
Sensors mounted opposite each other, slant Sensors shown following diagram. (This because Sensors affect each other cause output chattering even separated more than Sensor sensing distance.)
Sensor Sensor
Adjust sensitivity.
Lowering sensitivity will generally help.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Photoelectric Sensors Technical Guide
Noise
Countermeasures noise depend path noise entry, frequency components, wave heights. Typical measures given following table. Type noise Noise intrusion path countermeasure Before countermeasure Noise enters from noise source through frame (metal).
Sensor Inverter motor
After countermeasure Ground inverter motor less) Ground noise source power supply (0-V side) through capacitor (film capacitor, 0.22 Insert insulator (plastic, rubber, etc.) between Sensor mounting plate (metal).
Insert insulator. Sensor Mounting block (metal) Inverter motor Noise Noise
Common mode noise (inverter noise)
Common noise applied between mounting board lines, respectively.
Mounting block (metal) Noise
Noise
Noise propagates through from noise source directly enters Sensor. Radiant noise
Ingress high-frequency electromagnetic waves directly into Sensor, from power line, etc.
Insert shield (copper) plate between Sensor noise source e.g., switching power supply). Separate noise source Sensor distance where noise does affect operation.
Shield plate (copper)
Noise source
Sensor
Noise source Sensor
Noise enters from power line. Power line noise
Ingress electromagnetic induction from high-voltage wires switching noise from switching power supply
Noise Sensor Noise
Insert capacitor (e.g., film capacitor), noise filter (e.g., ferrite core insulated transformer), varistor power line.
Insert capacitor, etc. Sensor Noise
Wiring Cable
Unless otherwise indicated, maximum length cable extension using wire that greater. Exceptions indicated Safety Precautions individual product information.
Separation from High Voltage (Wiring Method)
cables Sensor together with high-voltage lines power lines. Placing them same conduit duct cause damage malfunction induction interference. general rule, wire Sensor separate system, independent metal conduit, shielded cable.
Cable Tensile Strength
When wiring cable, subject cable tension greater than that indicated following table. Cable diameter Less than greater Tensile strength max. max.
Power line
Work Required Unconnected Leads
Unused leads self-diagnosis outputs other special functions should wrapped with insulating tape prevent contact with other terminals.
Note: subject shielded cable coaxial cable tension.
Repeated Bending
Normally, Sensor cable should bent repeatedly. (For bending-resistant cable, Attachment Moving Parts page C-4.)
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Photoelectric Sensors Technical Guide
Power Supply
When using commercially available switching regulator, ground (frame ground) (ground) terminals. grounded, switching noise power supply cause malfunction.
Mounting Attachment Moving Parts
mount Photoelectric Sensor moving part, such robot hand, consider using Sensors that uses bending-resistant cable (robot cable). Although bending repetition tolerance standard cable approximately 13,000 times, robot cable excellent bending tolerance approximately 500,000 times.
Example Connection with S3D2 Sensor Controller Three-wire Output Sensors
Reverse operation possible using signal input switch S3D2.
Cable Bending Destruction Test (Tough Wire Breaking Test)
With current flowing, bending repeated check number bends until current stops.
Blue Black Brown
S3D2
Weight
Specimen Test Bending angle Bending repetitions Weight Operation bending Bending radius support points
Standard cable x18/0.12 Left/right each -300g through figure once Approx. 13,000 times
Robot cable: Strong, conductive electrical wire 0.15 mm2, shielded Left/right each bends/minute 200g through figure once Approx. 500,000 times
Result
testing conditions standard cable robot cable different. Refer values above table check bend-resistant performance under actual working conditions.
Description/conditions
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Photoelectric Sensors Technical Guide
Adjustments Optical Axis Adjustment
Move Photoelectric Sensor both vertically horizontally center range which operation indicator lit. E3S-C, optical axis mechanical axis same, optical axis easily adjusted aligning mechanical axis.
Receiver Emitter Lock lever Locked position Protective cover Insertion position
Securing Fibers
Fiber Unit uses one-touch locking mechanism. following methods attach remove Fiber Units.
Attaching Fibers
Open protective cover, insert fiber insertion mark side Fiber Unit, then lower lock lever.
Lock released position
Incident indicator Operation indicator Optimum value Incident indicator Operation indicator
Optical axis:
Fiber insertion mark Fiber
Removing Fibers
Open protective cover, lift lock lever, pull fibers.
axis from center lens center beam Emitter axis from center lens center reception area Receiver. Mechanical axis: axis perpendicular center lens.
Emitter Optical axis Optical axis Receiver
Locked position
Lock released position
Protective cover Emission beam
Mechanical axis Reception area
Note:1.To maintain fiber characteristics, make sure that lock released before removing fibers. Lock unlock fibers ambient temperature 40°C.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Photoelectric Sensors Technical Guide
Operating Environment Water Resistance
water, rain, outside.
Maintenance Inspection Points Check When Sensor Does Operate
Sensor does operate, check following points. wiring connections correct? mounting screws loose? optical axis sensitivity adjusted correctly? sensing object workpiece speed satisfy ratings specifications? foreign objects, such debris dust, adhering Emitter lens Receiver lens? strong light, such sunlight (e.g., reflected from wall), shining Receiver? attempt disassemble repair Sensor under circumstances. determine that Sensor clearly failure, immediately turn power supply.
Ambient Conditions
this Sensor following locations. Otherwise, malfunction fail. Locations exposed excessive dust dirt Locations exposed direct sunlight Locations with corrosive vapors Locations where organic solvents splash onto Sensor Locations subject vibration shock Locations where there possibility direct contact with water, oil, chemicals Locations with high humidity where condensation result
Environmentally Resistive Sensors
E3HQ used locations above.
Lens Case
lens case Photoelectric Sensor primarily made plastic. Dirt should gently wiped with cloth. thinner other organic solvents. case E3ZM, E3ZM-C E3S-C metal. lens, however, plastic.
Optical Fiber Photoelectric Sensors Explosive Atmospheres
Fiber Unit installed hazardous area, Amplifier Unit installed non-hazardous area.
<Reason>
explosion fire electrical equipment occur, both hazardous atmosphere source ignition must same location. Optical energy does ignition source, thus there danger explosion fire. lens, case, fiber covering made plastic, this setup cannot used there possibility contact with solvents that will corrode degrade (e.g., cloud) plastic.
Accessories Using Reflector (E39-R3/R37/RS1/RS2/RS3) During Application
When using adhesive tape rear face, apply after washing away dust with detergent. Reflector cannot mounted there dirt remaining. press E39-RS1/RS2/RS3 with metal fingernail.This weaken performance. This Sensor cannot used locations where chemicals splash Sensor.
<Ignition Source>
Electrical sparks high-temperature parts that have sufficient energy cause explosion hazardous atmosphere called ignition sources.
Connectors
sure connect disconnect connector after turning Sensor. Hold connector cover connect disconnect connector. Secure connector cover hand. pliers, otherwise connector damaged. connector connected securely, connector disconnected vibration proper degree protection Sensor maintained.
Hazardous area
Non-hazardous area
Fiber Unit Amplifier Unit Sensing object
Others Influence from External Electrical Fields
bring transceiver near Photoelectric Sensor wiring, because this cause incorrect operation.
Values Given Typical Examples
data values given typical examples ratings performance indicate specified performance. They rather values from samples taken from production lots, provided reference guidelines. Typical examples include minimum sensing object, engineering data, step (height) detection data, selection list specifications.
Cleaning
Keep organic solvents away from Sensor. Organic solvents will dissolve surface. soft, cloth clean Sensor.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Read Understand This Catalog
Please read understand this catalog before purchasing products. Please consult your OMRON representative have questions comments.
Warranty Limitations Liability
WARRANTY
OMRON's exclusive warranty that products free from defects materials workmanship period year other period specified) from date sale OMRON. OMRON MAKES WARRANTY REPRESENTATION, EXPRESS IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, FITNESS PARTICULAR PURPOSE PRODUCTS. BUYER USER ACKNOWLEDGES THAT BUYER USER ALONE DETERMINED THAT PRODUCTS WILL SUITABLY MEET REQUIREMENTS THEIR INTENDED USE. OMRON DISCLAIMS OTHER WARRANTIES, EXPRESS IMPLIED.
LIMITATIONS LIABILITY
OMRON SHALL RESPONSIBLE SPECIAL, INDIRECT, CONSEQUENTIAL DAMAGES, LOSS PROFITS, COMMERCIAL LOSS CONNECTED WITH PRODUCTS, WHETHER SUCH CLAIM BASED CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY. event shall responsibility OMRON exceed individual price product which liability asserted. EVENT SHALL OMRON RESPONSIBLE WARRANTY, REPAIR, OTHER CLAIMS REGARDING PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, MAINTAINED SUBJECT CONTAMINATION, ABUSE, MISUSE, INAPPROPRIATE MODIFICATION REPAIR.
Application Considerations
SUITABILITY
OMRON shall responsible conformity with standards, codes, regulations that apply combination products customer's application product. customer's request, OMRON will provide applicable third party certification documents identifying ratings limitations that apply products. This information itself sufficient complete determination suitability products combination with product, machine, system, other application use. following some examples applications which particular attention must given. This intended exhaustive list possible uses products, intended imply that uses listed suitable products: Outdoor use, uses involving potential chemical contamination electrical interference, conditions uses described this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, installations subject separate industry government regulations. Systems, machines, equipment that could present risk life property. Please know observe prohibitions applicable products. NEVER PRODUCTS APPLICATION INVOLVING SERIOUS RISK LIFE PROPERTY WITHOUT ENSURING THAT SYSTEM WHOLE BEEN DESIGNED ADDRESS RISKS, THAT OMRON PRODUCT PROPERLY RATED INSTALLED INTENDED WITHIN OVERALL EQUIPMENT SYSTEM.
Disclaimers
CHANGE SPECIFICATIONS
Product specifications accessories changed time based improvements other reasons. practice change model numbers when published ratings features changed, when significant construction changes made. However, some specifications product changed without notice. When doubt, special model numbers assigned establish specifications your application your request. Please consult with your OMRON representative time confirm actual specifications purchased product.
DIMENSIONS WEIGHTS
Dimensions weights nominal used manufacturing purposes, even when tolerances shown.
ERRORS OMISSIONS
information this catalog been carefully checked believed accurate; however, responsibility assumed clerical, typographical, proofreading errors, omissions.
PERFORMANCE DATA
Performance data given this catalog provided guide user determining suitability does constitute warranty. represent result OMRON's test conditions, users must correlate actual application requirements. Actual performance subject OMRON Warranty Limitations Liability.
PROGRAMMABLE PRODUCTS
OMRON shall responsible user's programming programmable product, consequence thereof.
COPYRIGHT COPY PERMISSION
This catalog shall copied sales promotions without permission. This catalog protected copyright intended solely conjunction with product. Please notify before copying reproducing this catalog manner, other purpose. copying transmitting this catalog another, please copy transmit entirety.
2007.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
interest product improvement, specifications subject change without notice.
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Other recent searches
uPC659A - uPC659A uPC659A Datasheet
BDX54 - BDX54 BDX54 Datasheet
BDX54A - BDX54A BDX54A Datasheet
BDX54B - BDX54B BDX54B Datasheet
BDX54C - BDX54C BDX54C Datasheet
BDX53 - BDX53 BDX53 Datasheet
BDX53A - BDX53A BDX53A Datasheet
BDX53B - BDX53B BDX53B Datasheet
BDX53C - BDX53C BDX53C Datasheet
APA3010SURCK - APA3010SURCK APA3010SURCK Datasheet
2N2218 - 2N2218 2N2218 Datasheet
2N2219 - 2N2219 2N2219 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
