Micro (AXJ5) CONNECTORS Structure prevent reverse insertion plug

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Micro (AXJ5) CONNECTORS Structure prevent reverse insertion plug

Datasheet Thumbnail

Top Searches for this datasheet

ROBUST RECEPTACLE STRUCTURE WITHSTANDS ROUGH HANDLING USERS
Micro (AXJ5) CONNECTORS
Structure prevent reverse insertion plug Micro standard requires that type receptacle prevents plugs from being inserted reverse orientation with resin part mating section. reinforced joint between receptacle shell body also resistant plug's reverse insertion force.
FEATURES
Compatible with Micro standards Compatible with new-generation connector standard, which officially announced Implementers Forum January 2007 Resistant twisting These connectors have metal pegs added foot pattern recommended Micro connector standards ensure secure fixing boards. Also, shell made stainless steel, seam dovetail joints, which provides higher resistance force applied opening seam. Resistant forcible insertion plug large crimped parts rear receptacle shell securely hold receptacle body, providing high resistance forcible insertion plug.
APPLICATIONS
Interface portion mobile phones digital consumer products (e.g. DSC, Music players, etc.)
Compliance with RoHS Directive
ORDERING INFORMATION
Micro connectors <Receptacle> Receptacle <Composition> Micro right angle type Micro right angle type <Installation type, With/without shell mating guide> Standard type, with shell mating guide <Terminal shape, Pegs (retention fitting) shape Positioning bosses> Terminal portion: SMD, Pegs (retention fitting): Positioning bosses: without positioning bosses Terminal portion: SMD, Pegs (retention fitting): Positioning bosses: without positioning bosses <Package> Embossed tape packaging
PRODUCT TYPES
Type Micro Right angle type Receptacle Micro Right angle type terminal Terminal shape Pegs (retention fitting) Without positioning bosses Positioning bosses Part number AXJ53312G AXJ53314G AXJ53612G AXJ53614G Packing quantity Inner carton reel) 3,000 pcs. 2,500 pcs. 3,000 pcs. 2,500 pcs. Outer carton reels) 6,000 pcs. 5,000 pcs. 6,000 pcs. 5,000 pcs.
Micro (AXJ5) CONNECTORS AKCT1B90E-1 '07.11
http://www.mew.co.jp/ac/e/
Matsushita Electric Works, Ltd.
SPECIFICATIONS
Characteristics
Item Specifications When applying current only signal terminals: (for terminal When applying current power terminal: (for terminal (for terminal DC/AC Max. Min. 100M 100V (Dielectric breakdown must occur during min. application) Max. Max. 10,000 times Contact resistance: Max. Composite insertion force: Max. Composite removal force: Min. Appearance: abnormality -55°C 85°C -55°C 85°C (-40°C 50°C packaging materials) Discontinuity: Max. Contact resistance: Max. Appearance: abnormality Conditions
Rated current
Electrical characteristics
Rated voltage Contact resistance Insulation resistance Breakdown voltage
EIA-364-23 (Inductive resistance wire included) EIA-364-21 Using 100V megger EIA-364-20 Detection current: EIA-364-30 (Measure between adjacent terminals unmated connector frequency kHz.) EIA-364-13 Insert remove plug speed 12.5 mm/min. EIA-364-09 Repeated insertion removal speed max. times/hours (Mechanical insertion removal) freezing condensation temperatures freezing condensation temperatures EIA-364-28 Apply vibration three directions including mating axis that perpendicular another minutes respectively with current applied. Cord length: 100mm cord end. EIA-364-27 Acceleration: 294m/s2 (30G) Duration: Application directions: surfaces directions) Number applications: times respectively (Total: times) Cord length: 100mm cord end.
Electrostatic capacity Mechanical characteristics Lifetime characteristics Composite insertion force (initial) Insertion removal life Ambient temperature Storage temperature
Vibration resistance
Impact resistance Environmental characteristics Heat resistance (mated)
Discontinuity: Max. Contact resistance: Max. Appearance: abnormality hours Contact resistance: Max. Breakdown voltage: 100V dielectric breakdown must occur during one-minute application. Insulation resistance: Min. 100M Appearance: abnormality cycles Contact resistance: Max. Breakdown voltage: 100V dielectric breakdown must occur during one-minute application. Insulation resistance: Min. 100M Appearance: abnormality Peak temperature: Max. 260°C 300±10°C: Max. 350±10°C: Max.
EIA-364-17 Temperature: 85±2°C
Humidity resistance (mated)
EIA-364-31 Method
Soldering temperature resistance
Reflow soldering Manual soldering
Material surface treatment
Part name Resin-molding portion Metal parts Contact Shell Material Heat-resistant resin (UL94V-0) Copper alloy Stainless steel Surface treatment Contact portion: plating base, plating surface Terminal portion: plating base, plating surface (Except ends) plating base, plating surface (Except ends)
DIMENSIONS (unit:
data products with Data mark downloaded from: http://www.mew.co.jp/ac/e
Micro Receptacle Pegs (retention fitting): type Part number AXJ53312G External dimensions
Data
7.80 7.50
Recommended board pattern (TOP VIEW)
8.40±0.05 5.90±0.05 Note) 0.45±0.05 1.25±0.05 2.85±0.05 1.90±0.05 1.45±0.05 3.90±0.05 2.60±0.05 1.30±0.05 0.40±0.05
5.60 5.00
0.90 2.15
3.35±0.05 1.35±0.05 (0.70)
(Resist area) (Resist area) (Resist area)
0.95±0.05 0.50±0.05 0.95±0.05
8.00 6.90 6.20
board edge
6.20±0.05 9.80±0.05
0.75
1.85 1.10
Terminal No.1
1.30 2.60 5.20 5.40
1.00 2.45 3.00
Note)
board pattern Apply resist onto board pattern.
When mounted board
Terminal No.5 0.15 0.50 0.75 Shell pegs (retention fitting) (Front)
0.25±0.1 1.30±0.1 2.60±0.1
Shell pegs (retention fitting) (Back)
General tolerance: ±0.3
Pegs (retention fitting): type Part number AXJ53314G External dimensions
Data
7.50 Through hole
Recommended board pattern (TOP VIEW)
8.40±0.05 5.90±0.05 0.45±0.05 1.25±0.05 2.85±0.05 2.20±0.05 4.15±0.05 board edge 6.75±0.05 3.90±0.05 2.60±0.05 1.30±0.05 0.40±0.05
5.60 5.00
3.30±0.05 1.35±0.05
0.75
8.00 6.90 6.20 5.40 1.85 1.10
6.15±0.05 6.75±0.05
view
1.00 2.45 3.00
2.00±0.05 1.30±0.05 2.20±0.05 1.70±0.05
0.50±0.05 3.55±0.05 4.15±0.05 4.75±0.05
Bottom view
Terminal No.1
1.30 2.60 5.55
0.80
Terminal No.5 0.30
0.80 2.20
When mounted board
0.50 0.75
0.25±0.1 1.30±0.1 2.60±0.1
Shell pegs (retention fitting) (Back)
General tolerance: ±0.3
0.15
Micro Receptacle Pegs (retention fitting): type Part number AXJ53612G External dimensions
Data
8.80 7.50 Note) 0.90
Recommended board pattern (TOP VIEW)
8.40±0.05 6.30±0.05
5.60 5.00
2.15
3.35±0.05 1.35±0.05 (0.70)
1.45±0.05 (Resist area)
8.00 6.90 6.20 1.10 1.35 2.45 3.00
7.20±0.05 9.30±0.05
board edge
1.85
Note)
board pattern Apply resist onto board pattern.
Terminal No.1
1.30 2.60 5.30
Terminal No.5 0.15
When mounted board
0.50 0.75
Shell pegs (retention fitting) (Front)
0.25±0.1 1.30±0.1 2.60±0.1
Shell pegs (retention fitting) (Back)
General tolerance: ±0.3
Pegs (retention fitting): type Part number AXJ53614G External dimensions
Data
7.50 Through hole
Recommended board pattern (TOP VIEW)
0.45±0.05 1.25±0.05 2.80±0.05 8.40±0.05 6.30±0.05 3.90±0.05 2.60±0.05 1.30±0.05 0.40±0.05
5.60 5.00
3.30±0.05 1.35±0.05
1.30±0.05 1.90±0.05 1.45±0.05
0.50±0.05 (Resist area) 1.45±0.05 (Resist area)
0.45±0.05 1.25±0.05 2.85±0.05 5.80±0.05 8.40±0.05 Bottom view 2.20±0.05
3.90±0.05 2.60±0.05 1.30±0.05 0.40±0.05
8.00 6.90 6.20
4.30±0.05 5.80±0.05 6.40±0.05 7.80±0.05 8.40±0.05 view
2.00±0.05 1.30±0.05 2.20±0.05 1.70±0.05
0.50 ±0.05
board edge
1.85
1.10 1.35 2.45 3.00
Terminal No.1
1.30 2.60 5.30 7.20
0.80
0.80 Terminal No.5 0.30 0.15 2.20
When mounted board
0.50 0.75
0.25±0.1 1.30±0.1 2.60±0.1
Shell pegs (retention fitting) (Back)
General tolerance: ±0.3
EMBOSSED TAPE DIMENSIONS (unit:
Tape dimensions (Conforming 0806-3 1990)
(24.0±0.3) (11.5) 1.75 (25.4±1) cover tape Pull direction
Reel dimensions (Conforming EIAJ ET-7200B)
(2.0)
(4.0)
dia.
Emboss carrier tape
1.55±0.05 dia.
NOTES
cover recommended when using this device order prevent scraps, dust, dirt, etc., from getting inside receptacle. board design Please refer recommended board pattern ensure strength soldered portion terminals. Soldering Manual soldering Please temperature applied time soldering iron indicated specification sheet. Avoid excessive amount solder from being applied, flow into shell. Please soldering iron after confirming removal dispersed solder flux contact surface magnifying glass after each soldering. apply load terminals during soldering, contacts displaced. Please properly clean soldeing iron. Reflow soldering Screen printing recommended cream solder printing. Screen thickness 0.12mm recommended cream solder printing. When applying different thickness screen, please consult Depending upon size connector, self alignments expected. Please attention align terminals soldered pads. following diagram shows recommended reflow soldering temperature profile. Recommended reflow soldering temperature profile
Temperature Max. 260°C Maximum temperature 200°C 175°C Pre-heating second Max. Time
(8.0)
temperature measured board surface near connector terminals. After reflow soldering, case board surface reverse side using reflow soldering, example adhesive connector fixed disposition. Rework soldering portion Rework time. Avoid excessive amount solder from being applied, flow into shell. case soldering rework bridges. Please flat-head soldering iron don't supplementary solder flux. Please soldering iron under specification's temperature Since excessive force terminals will cause deformation integrity soldering will lost during reflow soldering, avoid dropping rough handling product.
board warpage should controlled less than 0.03mm entire length connector. Repeated bending terminals pegs (retention fitting) result terminals breaking. Regarding after soldering connectors boards After mounting connectors boards, apply excessive loads connector piling boards. Please force connector during assembled connector board. This connector metal shell preventing EMI, when designing enclosure followings should considered. Guide plug entrance should arranged order prevent distorted insertions. Provide cover reinforce metal shell portions receptacle. Others prevent insulation deterioration board after soldering, please avoid adhesion coating agent terminals case coating. other details, please verify with product specification sheets.
These materials printed pulp. These materials printed with earth-friendly vegetable-based (soybean oil) ink.
Please contact
Matsushita Electric Works, Ltd.
Automation Controls Business Unit Head Office: 1048, Kadoma, Kadoma-shi, Osaka 571-8686, Japan Telephone: +81-6-6908-1050 Facsimile: +81-6-6908-5781 http://www.mew.co.jp/ac/e/
AKCT1B90E-1 200711-3YT
Rights Reserved 2007 COPYRIGHT Matsushita Electric Works, Ltd.
Specifications subject change without notice. Printed Japan.

Micro (AXJ5) CONNECTORS Structure prevent reverse insertion plug

Top Searches for this datasheet

Other recent searches