0.6A Dropout Positive Adjustable Fixed-Mode Regulator Features AP

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

0.6A Dropout Positive Adjustable Fixed-Mode Regulator Features AP

Datasheet Thumbnail

Top Searches for this datasheet

AP1115
0.6A Dropout Positive Adjustable Fixed-Mode Regulator Features
AP1115 dropout positive adjustable fixed-mode regulator with minimum 0.6A output current capability. product specifically designed provide well-regulated supply voltage applications such high-speed termination current 3.3V logic supply. AP1115 also well suited other applications such cards. AP1115 guaranteed have <1.3V dropout full load current making ideal provide well regulated outputs 1.25V with input supply.
1.3V maximum dropout full load current Fast transient response Output current limiting Built-in thermal shutdown Packages: SOT89, TO92 Good noise rejection 3-Terminal Adjustable Fixed 1.5V 1.8V 2.5V 2.8V 3.0V /3.3V 5.0V
Applications
peripheral Communication
Connection Diagram (Top View)
AP1115A-3 SOT89 Pin2 AP1115B-3 SOT89 Pin2 Vout (GND) AP1115B-3 TO92 (GND) Vout AP1115A-3 TO92
Vout
Vout
Descriptions
NAME (GND) Vout FUNCTION resistor divider from this Vout ground sets output voltage. (Ground only Fixed-Mode) output regulator. minimum 10uF capacitor must connected from this ground insure stability. input regulator. Typically large storage capacitor connected from this ground insure that input voltage does below minimum dropout voltage during load transient response. This must always 1.3V higher than Vout order device regulate properly.
This datasheet contains product information. Anachip Corp. reserves rights modify product specification without notice. liability assumed result this product. rights under patent accompany sale product.
Rev.1.0 May.19, 2004
AP1115
0.6A Dropout Positive Adjustable Fixed-Mode Regulator Ordering Information
1115
Dropout Regulator
Lead Free Packing Blank Tube Pin1:Vout SOT89-3L Blank Blank Normal 2:Adj(GND) TO92-3L 1.5V Lead Free Package Taping
3:Vin Pin1:Adj(GND) 2:Vin 3:Vout 1.8V 2.5V 2.8V 3.0V 3.3V 5.0V
Version
Package
Vout
Typical Circuit
100uF Vout 3.3V/0.5A 100uF
100uF
Vout
121O
121O
2.5V/0.5A
100uF
AP1115A (5V/3.3V fixed output)
AP1115A (5V/2.5V output)
100uF Vout 3.3V/0.5A 100uF Vout
100uF
121O 100uF 121O
2.5V/0.5A
AP1115B (5V/3.3V fixed output)
AP1115B (5V/2.5V output)
Note: VREF
Anachip Corp. www.anachip.com.tw
Rev.1.0 May.19, 2004
AP1115
0.6A Dropout Positive Adjustable Fixed-Mode Regulator Absolute Maximum Ratings
Symbol Parameter Supply Voltage Power Dissipation Storage Temperature Operating Junction Temperature Range Rating -0.3 Internally Limited +150 +150 Unit
Electrical Characteristics (Under Operating Conditions)
PARAMETER Reference Voltage AP1115-ADJ AP1115-1.5 AP1115-1.8 AP1115-2.5 Output Voltage AP1115-2.8 AP1115-3.0 AP1115-3.3 AP1115-5.0 Line Regulation AP1115-XXX AP1115-ADJ AP1115-1.5 AP1115-1.8 AP1115-2.5 Load Regulation AP1115-2.8 AP1115-3.0 AP1115-3.3 AP1115-5.0 Dropout Voltage (VIN-VOUT) Current Limit Minimum Load Current Thermal Regulation CONDITIONS TJ=25 C,(VIN-OUT)=1.5V IO=10mA IOUT 10mA, 25oC, 3VVIN12V IOUT 10mA, 25oC, 3.3VVIN12V IOUT 10mA, 4VVIN12V IOUT 10mA, 4.3VVIN12V IOUT 10mA, 4.5VVIN12V IOUT 10mA, 4.8VVIN12V IOUT 10mA, 25oC, 6.5VVIN12V IO=10mA,VOUT+1.5V<VIN<15V, TJ=25 VIN=3.3V,Vadj=0,0mA<Io<0.6A, TJ=25 (Note 1,2) VIN=3V, 0mA<Io<0.6A, TJ=25 (Note 1,2) VIN=3.3V, 0mA<Io<0.6A, TJ=25oC (Note 1,2) VIN=4V, 0mA<Io<0.6A, TJ=25oC (Note 1,2) VIN=4.3V, 0mA<Io<0.6A, TJ=25 (Note 1,2) =5V, 0IOUT0.6A, TJ=25 (Note 1,2) =5V, 0IOUT0.6A, TJ=25oC (Note 1,2) =8V, 0IOUT0.6A, TJ=25oC (Note 1,2) 1.225 1.470 1.764 2.450 2.744 2.940 3.235 4.900 1.250 1.500 1.800 2.500 2.800 3.000 3.300 5.000 0.008 1.275 1.530 1.836 2.550 2.856 3.060 3.365 5.100 0.04 UNIT
AP1115-ADJ/1.5/1.8 IOUT 0.6A, VOUT=0.1%VOUT 2.5/2.8/3.0/3.3/5.0 AP1115-ADJ/1.5/1.8 (VIN-VOUT) 2.5/2.8/3.0/3.3/5.0 0oCTj125oC AP1115-XXX TA=25 30ms pulse
This datasheet contains product information. Anachip Corp. reserves rights modify product specification without notice. liability assumed result this product. rights under patent accompany sale product.
Rev.1.0 May.19, 2004
AP1115
0.6A Dropout Positive Adjustable Fixed-Mode Regulator Electrical Characteristics (Continued) (Under Operating Conditions)
Ripple Rejection Temperature Stability F=120Hz,COUT=25uF Tantalum, IOUT=0.6A AP1115-XXX VIN=VOUT+3V IO=10mA Thermal Resistance Junction-to-Ambient heat sink; flow) SOT89: Control Circuitry/Power Transistor Thermal Resistance Junction-to-Case
SOT89 TO92
Note1: thermal regulation specifications changes output voltage heating effects. Line load regulation measured constant junction temperature duty cycle pulse testing. Load regulation measured output lead 1/18" from package. Note2: Line load regulation guaranteed maximum power dissipation Power dissipation determined input/output differential output current. Guaranteed maximum power dissipation will available over full input/output range. Note3: Quiescent current defined minimum output current required maintain regulation. input/output differential device guaranteed regulate output current greater than 10mA.
Marking Information
Identification Code Output version 1.5V 1.8V 2.5V 2.8V 3.0V 3.3V 5.0V Part Number AP1115A AP1115B
Date Code Month: Year:
Identification Code table Blank: normal Lead Free Package
SOT89-3
(Top View) Part Number: AP1115 version version Output voltage Blank: 15:1.5V 18:1.8V 25:2.5V 28:2.8V 30:3.0V 33:3.3V 50:5.0V
Anachip Corp. www.anachip.com.tw
1115 Blank: normal Lead Free Package Internal code: Blank Week: 01~52 Year: "1"=2001 "2"=2002
TO92
Rev.1.0 May.19, 2004
AP1115
0.6A Dropout Positive Adjustable Fixed-Mode Regulator Typical Performance Characteristics
0.20
Output Voltage Deviation
load=600mA
Dropout Voltage
-0.20
-0.40
-0.80
Dropout Voltage Output Current
Output Current (mA)
Load Regulation Temperature
Temperature
Output Voltage Change
-0.5 -1.5
Output Voltage Deviation
Percent Change Output Voltage Temperature
Output Voltage Deviation (mV) Input Voltage Load Current Output Voltage Deviation (mV) Cin=1uF Cout=10uF Tantalum
Temperature
Line Regulation
Tantalum Preload 100mA
Input Voltage
TIME (us)
Line Transient Response
Anachip Corp. www.anachip.com.tw
Load Transient Response
TIME (us)
Rev.1.0 May.19, 2004
AP1115
0.6A Dropout Positive Adjustable Fixed-Mode Regulator Package Information
Package Type: SOT89-3L
50(2x) 80(2x)
Symbol
Dimensions Millimeters Min. 1.40 0.36 0.41 0.35 4.40 1.40 2.90 1.45 2.40 3.94 0.80 Nom. 1.50 0.42 0.47 0.39 4.50 1.60 3.00 1.50 2.50 Max. 1.60 0.48 0.63 0.43 4.60 1.75 3.10 1.55 2.60 4.25 1.20
Dimensions Inches Min. 0.055 0.014 0.016 0.014 0.173 0.055 0.114 0.057 0.094 0.155 0.031 Nom. 0.059 0.016 0.043 0.015 0.177 0.062 0.118 0.059 0.098 Max. 0.063 0.018 0.051 0.017 0.181 0.069 0.122 0.061 0.102 0.167 0.047
Anachip Corp. www.anachip.com.tw
Rev.1.0 May.19, 2004
AP1115
0.6A Dropout Positive Adjustable Fixed-Mode Regulator
Package Type: TO92-3L
Symbol
Dimensions Millimeters Min. Nom. Max. 3.302 3.556 3.810 1.016 0.330 0.381 0.432 0.406 0.457 0.506 4.445 4.572 4.699 4.445 4.572 4.699 13.00 15.50 1.150 1.270 1.390
Dimensions Inches Min. Nom. Max. 0.130 0.140 0.150 0.040 0.013 0.015 0.017 0.016 0.018 0.020 0.175 0.180 0.185 0.175 0.180 0.185 0.512 0.610 0.045 0.050 0.055
Anachip Corp. www.anachip.com.tw
Rev.1.0 May.19, 2004

0.6A Dropout Positive Adjustable Fixed-Mode Regulator Features AP

Top Searches for this datasheet

Other recent searches