Series sFeatures Full Lock Mechanism connector equipped
|
|
|
Top Searches for this datasheet
2.5mm Pitch Connector Discrete Wire Connection
Series
sFeatures
Full Lock Mechanism
connector equipped with full lock mechanism removed, unless locks reset both sides. This mechanism activated effectively prevent cable hooking mis-insertion.
Thin Type Connector
Mounting height when connector used right angle
4.5mm
Mechanism Prevent Mis-insertion
This thin type connector equipped with mechanism prevent misinsertion. Thickness 4.5mm
Plating Gold Plating Variation
kinds plating gold plating types available, chosen according application. plating also light operating touch.
Mechanism prevent false-insertion Full lock mechanism
sApplications
Various business equipment, financial terminals
B139
sProduct Specifications
Current rating Rating (Note1) 0.5A Voltage rating Item Insulation Resistance Withstanding voltage Contact Resistance Vibration 1000M ohms min. flashover insulation breakdown. ohms electrical discontinuity more 250V Specification 500V 1000V AC/1 minute Measure square steel 0.635±0.002mm Frequency: single amplitude 0.75 hours each directions. minutes minutes minutes minutes) cycles plating cycles Gold plating cycles Flow: seconds Manual soldering: seconds Operating Temperature Range Operating Moisture Range Storage Temperature Range Storage Moisture Range (Note2) (Note3) (Note3)
Condition
Insertor/Extraction Force 0.4N (40gf) min.,4.4N (450gf) max.
Humidity (Steady state) Contact resistance: ohms max.Insulation resistance: 1000M ohms min. hours temperature humidity Temperature Cycle Contact resistance: ohms max:Insulation resistance: 1000M ohms min.
Durability (Mating/un-mating) Contact resistance: ohms max. Resistance Soldering heat deformation components affecting performance.
Note rated current will changed according cable sizes use. header rating only Note Includes temperature rise caused current flow. Note term "storage" refers products stored long period time prior mounting use. Operating Temperature Range Humidity range covers conducting condition installed connectors storage, shipment during transportation.
sMaterial
Product Crimping Socket Contact Header Part Insulator Contact Insulator Contact Material Polyamide Phosphor Copper Polyamide Brass Finish Black plated gold plated Black plated gold plated Remarks UL94V-0 ----- UL94V-0 -----
sOrdering Information
qCrimping Plug
Series Name Series Contact Pitch Connector Type Socket Header 2.5mm Number Contacts Contact Type None Crimping socket Straight Right angle
qContact
HNC2 2.5S
Type: 2.5mm pitch socket Packaging Type Reel Applicable cable size AWG22 AWG26
B140
sCrimping Socket
[Figure
[Figure
Unit: Part Number HNC2-2.5S- 2(**) HNC2-2.5S- 3(**) HNC2-2.5S- 4(**) HNC2-2.5S- 5(**) HNC2-2.5S- 6(**) HNC2-2.5S- 7(**) HNC2-2.5S- 8(**) HNC2-2.5S-10(**) HNC1-2.5S-12(**) 218-0011-1-** 218-0022-8-** 218-0039-0-** 218-0027-1-** 218-0042-5-** 218-0030-6-** 218-0014-0-** 218-0017-8-** 218-0008-7-** Number Contacts 12.4 14.9 17.4 19.9 22.4 24.9 27.4 32.4 13.5 18.5 12.5 17.5 22.5 27.5 Figure Figure Dimensions [Specific No.] Blank :Bag packaging
Figure 44.9 38.5 HNC2-2.5S-15(**) 218-0045-3-** Note1: Please order quantity multiplied pcs. (Not bag, pcs.) Note2: series name contacts connector HNC1, partially will changed style.
B141
sStraight Header
[Figure
qBoard Through-hole Diameter:
[Figure
Unit: Part Number HNC2-2.5P- 2DS(**) HNC2-2.5P- 3DS(**) HNC2-2.5P- 4DS(**) HNC2-2.5P- 5DS(**) HNC2-2.5P- 6DS(**) HNC2-2.5P- 7DS(**) HNC2-2.5P- 8DS(**) HNC2-2.5P-10DS(**) HNC1-2.5P-12DS(**) 218-0012-4-** 218-0023-0-** 218-0040-0-** 218-0028-4-** 218-0043-8-** 218-0031-9-** 218-0015-2-** 218-0018-0-** 218-0009-0-** Number Contacts 12.5 17.5 22.5 27.5 32.5 35.5 10.4 12.9 15.4 17.9 20.4 22.8 27.8 32.8 12.5 17.5 22.5 27.5 Specific plating Blank Blank Blank Blank Blank Blank Blank Blank Blank Gold plating Figure Figure Figure Dimensions
40.4 Blank HNC2-2.5P-15DS(**) 218-0046-6-** Note1: Please order quantity multiplied pcs. (Not bag, piece) Note2: series name contacts connector HNC1 style will partially changed.
B142
sRight Angle Header
[Figure
+0.1 qBoard Through-hole Diameter:
[Figure
Unit: Part Number HNC2-2.5P- 2DSL(**) HNC2-2.5P- 3DSL(**) HNC2-2.5P- 4DSL(**) HNC2-2.5P- 5DSL(**) HNC2-2.5P- 6DSL(**) HNC2-2.5P- 7DSL(**) HNC2-2.5P- 8DSL(**) HNC2-2.5P-10DSL(**) HNC1-2.5P-12DSL(**) 218-0013-7-** 218-0024-3-** 218-0041-2-** 218-0029-7-** 218-0044-0-** 218-0032-1-** 218-0016-5-** 218-0019-3-** 218-0010-9-** Number Contacts 12.5 17.5 22.5 27.5 32.5 35.5 10.4 12.9 15.4 17.9 20.4 22.8 27.8 32.8 12.5 17.5 22.5 27.5 Specific plating Blank Blank Blank Blank Blank Blank Blank Blank Blank Gold plating Figure Figure Figure Dimensions
40.4 Blank HNC2-2.5P-15DSL(**) 218-0047-9-** Note1: Please order quantity multiplied pcs. (Not bag, piece) Note2: series name contacts connector HNC1 style will partially changed.
B143
sCrimping Contact Socket
qApplicable Cable (Tin Plated Annealing Copper Wire)
Conductor Size (Contact wire construction) Jacket Diameter (17pieces/0.16mm) (11pieces/0.16mm) (07pieces/0.16mm) (07pieces/0.127mm) (07pieces/0.1mm)
qRecommended Cable
UL1061, UL1007
qStrip Length
3.3mm
Note: other cables used instead applicable cable, please contact Hirose sales department.
Unit: Part Number HNC-2.5S-D-A(**) HNC-2.5S-C-A(**) HNC-2.5S-D-B(**) HNC-2.5S-C-B(**) 218-0037-5-** 218-0021-5-** 218-0038-8-** 218-0020-2-** Conductor Size Jacket Diameter Packaging Type Reel Reel Quantity 10,000 10,000 Blank Specific plating Gold plating
1.7mm 1.35mm
sApplicable Crimping Tool
Type Applicator Press Main Unit Manual Crimping Tool Extraction Tool Part Number AP105-HNC CM105 TC-HNC-B TC-HNC-A DF1-C-PO 901-4502-0 901-0005-4 250-0005-7 250-0006-0 550-0177-7 Applicable Contact HNC-2.5S-C-A/HNC-2.5S-C-B ------------------------ HNC-2.5S-D-B HNC-2.5S-D-A HNC-2.5S-C-A/HNC-2.5S-C-B
Note: trouble occurred tools which designated Hirose, Hirose won't guarantee product.
sApplication Pattern
B144
BPrecautions
Recommended Soldering Condition Cleaning Condition Connection Condition Flow: seconds Manual soldering: seconds Refer Nylon Connector Hand book. Refer Nylon Connector Hand book. qExtracting Crimping Contact extract crimping contact from socket housing, observe following extraction procedures. sExtraction Tool Tool Name: DF-C-PO(550-0177-7) used.
Extraction Method shown below figure, slightly pull cable state where extraction tool 0.7mm board been inserted lance fixed slot, contact easily removed. Note: lance pressed excessively, contact body deformed, which could result contact failure. Therefore, careful press lance excessively.
Adjust Lance (Raise) re-insert terminal which removed from socket housing, sharp edge blade raise lance shown below illustration, then insert contact. Note: Lance regeneration effective only once.
B145
Other recent searches
TPS65510 - TPS65510 TPS65510 Datasheet
TDA7300 - TDA7300 TDA7300 Datasheet
TDA7300D - TDA7300D TDA7300D Datasheet
P2576 - P2576 P2576 Datasheet
2STC5200 - 2STC5200 2STC5200 Datasheet
2SD1211 - 2SD1211 2SD1211 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
