Series qStaggered termination configuration. Only 1.25 above boar
|
|
|
Top Searches for this datasheet
0.3mm Contact Pitch, 1.25mm above board, Flexible Printed Circuit Connectors
Series
qStaggered termination configuration. Only 1.25 above board.
Leadless type
Completely enclosed bottom surface
Lead type
1.25mm
sFeatures
insertion force high holding force
Hirose Electric's unique insertion force (LIF) design (patents pending) improves Flexible Printed Circuit (FPC) holding force after insertion. insertion force:Reduced approximately compared with FH18 Series connectors). holding force:Improvement approximately compared with FH18 Series connectors).
Temporary hold
There need hold after insertion connector. connector will hold correct position, allowing closing actuator. When actuator opened
Easy board mounting
surface mounted termination contacts staggered centers, positioned front back connector. Bottom connector completely insulated, allowing conductive traces under connector.
Proven Flip-lock Actuator assures easy reliable operation
Rotating actuator permits easy insertion reliable connection with FPC. Tactile sensation confirms complete mechanical locking actuator electrical connection.
Variations suit different mounting areas
Available with lead leadless type terminations (for opposing insertion side).
Designed placement with automatic equipment
Flat surface allows pick-up with vacuum nozzles. Packaged embossed tape, reel. reel contains 2,500 pieces.
Temporary hold
Accepts 0.2mm thick Variety contact positions
Available with pos.
Environmental considerations
Plating lead-free order protect environment.
sApplications
Mobile phones, PDA's, digital cameras, digital video cameras other compact devices requiring interconnections main circuit with LCD, plasma display (PDP), camera module, other devices. When actuator closed
2004.6
sProduct Specifications
Current rating Ratings Voltage rating Operating temperature range (Note Operating humidity range Relative humidity max. condensation) Storage temperature range (Note Storage humidity range Relative humidity max.
Recommended Item
Thickness: 0.2±0.03mm Tin-lead plating (Note Specification
AC/one minute cycles Frequency: single amplitude 0.75 cycles, axis. Acceleration duration, sine half-wave waveform, cycles, axis.
Conditions
Insulation resistance ohms min. Withstanding voltage flashover insulation breakdown Contact resistance ohms max. *Including FPC/FFC conductor resistance
Contact resistance: ohms max. Durability (insertion/ withdrawal) damage, cracks, parts dislocation. Vibration electrical discontinuity more. Contact resistance: ohms max. damage, cracks, parts dislocation. electrical discontinuity min. Contact resistance: ohms max. damage, cracks, parts dislocation. Contact resistance: ohms max. Insulation resistance: ohms min. damage, cracks, parts dislocation. Contact resistance: ohms max. Insulation resistance: ohms min. damage, cracks, parts looseness.
Shock
Humidity (Steady state)
hours temperature 40°C humidity Time: (Minutes) cycles Reflow: recommended temperature profile Manual soldering: seconds
Temperature cycle Resistance soldering heat
deformation components affecting performance.
Note Includes temperature rise caused current flow. Note term "storage" refers products stored long period time prior mounting use. Operating Temperature Range Humidity range covers non- conducting condition installed connectors storage, shipment during transportation. Note When gold plated, connector contacts should also gold plated: Select (05) specification.
sMaterials
Part Insulator Contacts Material Phosphor bronze Color:Beige Color:Black Tin-lead plating (Note UL94V-0 -Finish Remarks
sOrdering information
FH23
Series name FH23 contacts.
(05)
Terminal type
SHW: horizontal mounting type, lead type termination. SHAW: horizontal mounting type, lead-less type termination.
Number contacts
Contact pitch:
Plating specifications
(05) (51) Gold plating Tin-lead plating
BConnector Dimensions (Lead Type termination)
(0.15)
2.45
Number contacts indicator
(0.12)
0.05MAX. 4.15
(2.84)
1.25(Including contact terminal leads) 0.05MAX. 0.1MAX.
insertion area dimensions)
0.1MAX. 0.55
Notes coplanarity each terminal lead within 0.1. contact terminal lead position indicates dimension from surface, bottom surface insulator body. discoloration plastic compound will AFFECT form, function connector.
Lead Type
Part Number FH23-15S-0.3SHW(51) FH23-17S-0.3SHW(51) FH23-21S-0.3SHW(51) FH23-23S-0.3SHW(51) FH23-25S-0.3SHW(51) FH23-27S-0.3SHW(51) FH23-31S-0.3SHW(51) FH23-33S-0.3SHW(51) FH23-39S-0.3SHW(51) FH23-45S-0.3SHW(51) FH23-51S-0.3SHW(51) FH23-61S-0.3SHW(51) FH23-71S-0.3SHW(51) 586-1317-0-51 586-1300-7-51 586-1314-1-51 586-1324-5-51 586-1322-0-51 586-1308-9-51 586-1302-2-51 586-1304-8-51 586-1306-3-51 586-1318-2-51 586-1312-6-51 586-1310-0-51 586-1320-4-51 Number Contacts 17.0 17.6 18.8 19.4 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 23.8 13.6 14.2 15.4 16.0 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 20.4 14.2 14.8 16.0 16.6 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0 21.0
Unit: 14.83 15.43 16.63 17.23 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63 21.63
Note: Embossed tape reel packaging(2,500 pieces/reel) Order number reels.
sConnector Dimensions Diagram (Leadless Type termination)
(0.15)
2.45
Number contacts indicator
(0.12)
0.05MAX. 0.1MAX. 0.55 4.15
(2.84)
1.25 (Including contact terminal leads) 0.05MAX. 0.1MAX.
insertion area dimensions)
Notes coplanarity each terminal lead within 0.1. contact terminal lead position indicates dimension from surface, bottom surface insulator body. discoloration plastic compound will AFFECT form, function connector.
Leadless Type
Part Number FH23-15S-0.3SHAW(51) FH23-17S-0.3SHAW(51) FH23-21S-0.3SHAW(51) FH23-23S-0.3SHAW(51) FH23-25S-0.3SHAW(51) FH23-27S-0.3SHAW(51) FH23-31S-0.3SHAW(51) FH23-33S-0.3SHAW(51) FH23-39S-0.3SHAW(51) FH23-45S-0.3SHAW(51) FH23-51S-0.3SHAW(51) FH23-61S-0.3SHAW(51) FH23-71S-0.3SHAW(51) 586-1316-7-51 586-1301-0-51 586-1315-4-51 586-1325-8-51 586-1323-2-51 586-1309-1-51 586-1303-5-51 586-1305-0-51 586-1307-6-51 586-1319-5-51 586-1313-9-51 586-1311-3-51 586-1321-7-51 Number Contacts 17.0 17.6 18.8 19.4 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 23.8 13.6 14.2 15.4 16.0 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 20.4 14.2 14.8 16.0 16.6 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0 21.0
Unit: 14.83 15.43 16.63 17.23 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63 21.63
Note: Embossed tape reel packaging(2,500 pieces/reel) Order number reels.
BRecommended Land Metal Mask Dimensions (Lead Type)
0.7±0.05 B±0.05 (0.1) (5.2) 0.6±0.05 0.3±0.05 (Land) 0.25±0.05 (Metal mask)
3.45±0.05
(5.4)
0.3±0.05
1.25±0.05
Recommended metal mask thickness:
0.25±0.05 (Metal mask) C±0.05 (0.1) 0.6±0.05 0.3±0.05 (Land)
Lead Type
Part Number FH23-15S-0.3SHW(51) FH23-17S-0.3SHW(51) FH23-21S-0.3SHW(51) FH23-23S-0.3SHW(51) FH23-25S-0.3SHW(51) FH23-27S-0.3SHW(51) FH23-31S-0.3SHW(51) 586-1317-0-51 586-1300-7-51 586-1314-1-51 586-1324-5-51 586-1322-0-51 586-1308-9-51 586-1302-2-51 Number Contacts Part Number FH23-33S-0.3SHW(51) FH23-39S-0.3SHW(51) FH23-45S-0.3SHW(51) FH23-51S-0.3SHW(51) FH23-61S-0.3SHW(51) FH23-71S-0.3SHW(51) 586-1304-8-51 586-1306-3-51 586-1318-2-51 586-1312-6-51 586-1310-0-51 586-1320-4-51 Number Contacts 03.6 04.2 04.8 04.2 04.8 05.4 05.4 06.0 06.6 06.0 06.6 07.2 06.6 07.2 07.8 07.2 07.8 08.4 08.4 09.0 09.6
Unit: 09.0 09.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 14.4 15.0 15.6 17.4 18.0 18.6 20.4 21.0 21.6
BRecommended Land Metal Mask Dimensions (Leadless Type)
B±0.05 0.65±0.05 (4.6) 0.6±0.05 0.3±0.05(Land) 0.25±0.05(Metal mask)
2.9±0.05
0.3±0.05
(4.8)
1.25±0.05
Recommended metal mask thickness:
0.6±0.05 0.3±0.05(Land) 0.25±0.05(Metal mask) C±0.05 (0.1)
Leadless Type
Part Number Number Contacts Part Number Number Contacts FH23-15S-0.3SHAW(51) 586-1316-7-51 FH23-17S-0.3SHAW(51) 586-1301-0-51 FH23-21S-0.3SHAW(51) 586-1315-4-51 FH23-23S-0.3SHAW(51) 586-1325-8-51 FH23-25S-0.3SHAW(51) 586-1323-2-51 FH23-27S-0.3SHAW(51) 586-1309-1-51 FH23-31S-0.3SHAW(51) 586-1303-5-51 03.6 04.2 04.8 04.2 04.8 05.4 05.4 06.0 06.6 06.0 06.6 07.2 06.6 07.2 07.8 07.2 07.8 08.4 08.4 09.0 09.6 FH23-33S-0.3SHAW(51) 586-1305-0-51 FH23-39S-0.3SHAW(51) 586-1307-6-51 FH23-45S-0.3SHAW(51) 586-1319-5-51 FH23-51S-0.3SHAW(51) 586-1313-9-51 FH23-61S-0.3SHAW(51) 586-1311-3-51 FH23-71S-0.3SHAW(51) 586-1321-7-51
Unit: 09.0 09.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 14.4 15.0 15.6 17.4 18.0 18.6 20.4 21.0 21.6
BRecommended Dimensions
G±0.05 ±0.07 ±0.02 ±0.15 ±0.15 ±0.15 C±0.03 0.3±0.07
+0.04 -0.03
+0.04 -0.03
(0.07)
0.2±0.03
±0.3 (Area with removed covering layer film)
±0.15
(0.2)
(0.05) 0.6±0.02
(0.1 between conductors)
(0.2 conductor width)
0.3±0.02
B±0.03
0.6±0.07
+0.04 0.03
also permitted when drawing plated leads.
Polyamide thermally hardening adhesive recommended materials stiffener.
BPackaging Specification
qEmbossed Carrier Tape Dimensions(Tape width max.)
1.75±0.1 4±0.1 2±0.15 12±0.1
(0.5)
(1.7) (0.3)
K±0.1 (0.85) (5.1) (0.5) (2.45)
Flat surface placement with Automatic equipment
Unreeling direction
H±0.3
Unit: Part Number Number Contacts Part Number Number Contacts FH23-15S-0.3SHW(51) 586-1317-0-51 FH23-15S-0.3SHAW(51) 586-1316-7-51 FH23-17S-0.3SHW(51) 586-1300-7-51 FH23-17S-0.3SHAW(51) 586-1301-0-51 FH23-21S-0.3SHW(51) 586-1314-1-51 FH23-21S-0.3SHAW(51) 586-1315-4-51 FH23-23S-0.3SHW(51) 586-1324-5-51 FH23-23S-0.3SHAW(51) 586-1325-8-51 FH23-25S-0.3SHW(51) 586-1322-0-51 FH23-25S-0.3SHAW(51) 586-1323-2-51 FH23-27S-0.3SHW(51) 586-1308-9-51 FH23-27S-0.3SHAW(51) 586-1309-1-51 07.5 07.3 05.1 04.5 16.5 07.5 07.3 05.1 04.5 16.5 07.5 07.9 05.7 05.1 16.5 07.5 07.9 05.7 05.1 16.5 07.5 09.1 06.9 06.3 16.5 07.5 09.1 06.9 06.3 16.5 11.5 09.7 07.5 06.9 24.5 11.5 09.7 07.5 06.9 24.5 11.5 10.3 08.1 07.5 24.5 11.5 10.3 08.1 07.5 24.5 11.5 10.9 08.7 08.1 24.5 11.5 10.9 08.7 08.1 24.5 FH23-31S-0.3SHW(51) 586-1302-2-51 FH23-31S-0.3SHAW(51) 586-1303-5-51 FH23-33S-0.3SHW(51) 586-1304-8-51 FH23-33S-0.3SHAW(51) 586-1305-0-51 FH23-39S-0.3SHW(51) 586-1306-3-51 FH23-39S-0.3SHAW(51) 586-1307-6-51 FH23-45S-0.3SHW(51) 586-1318-2-51 FH23-45S-0.3SHAW(51) 586-1319-5-51 FH23-51S-0.3SHW(51) 586-1312-6-51 FH23-51S-0.3SHAW(51) 586-1313-9-51 11.5 12.1 09.9 09.3 24.5 11.5 12.1 09.9 09.3 24.5 11.5 12.7 10.5 09.9 24.5 11.5 12.7 10.5 09.9 24.5 11.5 14.5 12.3 11.7 24.5 11.5 14.5 12.3 11.7 24.5 11.5 16.3 14.1 13.5 24.5 11.5 16.3 14.1 13.5 24.5 11.5 18.1 15.9 15.3 24.5 11.5 18.1 15.9 15.3 24.5
qEmbossed Carrier Tape Dimensions(Tape width min.)
1.75±0.1 4±0.1 2±0.15 12±0.1
(1.7) (0.3)
K±0.1
+0.1
+0.15
Unreeling direction
(0.85)
(5.1)
(0.5)
Flat surface placement with Automatic equipment
(2.45)
H±0.3
J±0.1
Unit: Part Number FH23-61S-0.3SHW(51) FH23-61S-0.3SHAW(51) FH23-71S-0.3SHW(51) FH23-71S-0.3SHAW(51) 586-1310-0-51 586-1311-3-51 586-1320-4-51 586-1321-7-51 Number Contacts 28.4 14.2 21.1 18.9 18.3 32.5
40.4
20.2
24.1
21.9
21.3
44.5
qReel Dimensions
portion
Mounting portion
Lead portion (400 min.)
Blank portion pockets min.)
Embossed carrier tape
Blank portion pockets min.)
cover tape
BRecommended Temperature Profile
qUsing Typical Solder Paste
sec. Max.
Temperature
sec.) Start Preheating Time (Seconds) Soldering sec. sec. sec.) sec. sec.)
test conditions Solder method :Reflow, IR/hot (Nihon Den-netsu Co., Ltd.'s Part Number: SENSBY NR-2) Environment :Room Solder composition :Paste, 63%Sn/37%Pb (Senju Metal Industry, Co., Ltd.'s Part Number: OZ63-201C-50-9) Test board :Glass epoxy 45mm100mm1.6mm thick Land dimensions :Lead type 0.3mm1.25mm, 0.3mm0.7mm Leadless type 0.3mm1.25mm, 0.3mm0.65mm Metal mask :Lead type 0.25mm1.25mm0.1mm thick 0.25mm0.7mm0.1mm thick Leadless type 0.25mm1.25mm0.1mm thick 0.25mm0.65mm0.1mm thick This temperature profile based above conditions. individual applications actual temperature vary, depending solder paste type, volume/thickness board size/thickness. Consult your solder paste equipment manufacturer specific recommendations.
qUsing Lead-free Solder paste
Max.
test condition Solder method
Temperature
Environment Solder composition
Test board Land dimensions
sec.) sec. sec. Start Preheating Time (Seconds) Soldering
sec.)
Metal mask
:Reflow, IR/hot (Nihon Den-netsu Co., Ltd.'s Part Number: SENSBY NR-2) :Room :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number: M705-221CM5-42-10.5) :Glass epoxy 45mm100mm1.6mm thick Lead type 0.3mm1.25mm, 0.3mm0.7mm Leadless type 0.3mm1.25mm, 0.3mm0.65mm Lead type 0.25mm1.25mm0.1mm thick 0.25mm0.7mm0.1mm thick Leadless type 0.25mm1.25mm0.1mm thick 0.25mm0.65mm0.1mm thick
individual applications actual temperature vary, depending solder paste type, volume/thickness board size/thickness. Consult tour solder paste equipment manufacturer specific recommendations.
BFH23 Series Construction (Recommended Specifications)
Using Single-sided
Material Name Covering film layer. Cover adhesive Surface treatment Copper foil Base adhesive Base film Polyamide thick Tin-lead plating Material Polyamide thick. Thickness (µm)
Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total thick
Using Double-sided
Material Name Covering layer film Cover adhesive Surface treatment Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Polyamide thick 1/2oz Polyamide thick Tin-lead plating 1/2oz Material Polyamide thick Thickness (µm)
Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total thick
Precautions
Note Recommended specification 0.2±0.03 thick.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division 5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan Fujikura Ltd. Electronics Global Marketing Department 1-5-1, Kiba, Koto-ku, Tokyo, Japan Corporation Sales Division Overseas Business Department 1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan TEL:+81 5462 4191 FAX:+81 5462 4882 TEL:+81 5606 1165 FAX:+81 5606 1530 TEL:+81 3432 6976/8415 FAX:+81 3432 3919
BConnector Operating Instructions, precautions recommendations
Operation Precautions
apply excessive force type tool operate actuator.
1.FPC Termination procedure. Connector installed board.
Lift actuator. thumb index finger.
Rotate down actuator until firmly closed. NOTE: must fully inserted connector. fully inserted, actuator will close properly. Should this case, lift actuator (per Step below) repeat process (starting with Step above)
connector will assure reliable performance when actuator open maximum (see fig.1) exceed this angle, this cause permanent damage connector.
connectors with multiple contacts, such pos. rotate down actuator pushing both ends.
Assure that fully inserted parallel mounting surface, with exposed conductive traces facing down.
2.FPC Removal
Lift actuator. Carefully remove FPC.
conductor surface
Other recent searches
XSUO36C - XSUO36C XSUO36C Datasheet
UPC2771T - UPC2771T UPC2771T Datasheet
SRC1203SF - SRC1203SF SRC1203SF Datasheet
SQ4946EY - SQ4946EY SQ4946EY Datasheet
MT8VDDT3264H - MT8VDDT3264H MT8VDDT3264H Datasheet
MT8VDDT6464H - MT8VDDT6464H MT8VDDT6464H Datasheet
LM26420 - LM26420 LM26420 Datasheet
CVCO55CC-3340-3370 - CVCO55CC-3340-3370 CVCO55CC-3340-3370 Datasheet
1SS355 - 1SS355 1SS355 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
