TOSHIBA Photocoupler GaAAs Ired Photo TLP2630 Degital Logic

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

TOSHIBA Photocoupler GaAAs Ired Photo TLP2630 Degital Logic

Datasheet Thumbnail

Top Searches for this datasheet

TLP2630
TOSHIBA Photocoupler GaAAs Ired Photo
TLP2630
Degital Logic Isolation Tele-Communication Analog Data Equipment Control Microprocessor System Interface
TOSHIBA TLP2630 dual photocoupler consists pair GaAAs light emitting diode integrated high gain, high speed photodetector. output detector circuit open collector, schottky clamped transistor.This unit 8-lead DIP. Input current threshold: 5mA(max.) LSTTL/TTL compatible: supply Switching speed: 10MBd(typ.) Guaranteed performance over temperature: 0~70°C Isolation voltage: 2500Vrms(min.) recognized:UL1577, file E67349 TOSHIBA Weight: 0.54 11-10C4 Unit
Configuration (top view)
Anode Cathode Cathode Anode (output (output
Truth Table (positive logic)
Input Output
Schematic
0.01 0.1µF bypass capacitor must connected between pins (see Note
2002-09-25
TLP2630
Maximum Ratings derating required 70°C)
Characteristic Forward current(each channel) Pulse forward current (each channel)* Reverse voltage(each channel) Output current(each channel) Detector Output voltage(each channel) Supply voltage minute maximum) Output collector power dissipation(each channel) Operating temperature range Storage temperature range Lead soldering temperature (Note Isolation voltage (AC, min., R.H. 60%, Note Symbol Tstg Topr Tsol Rating -0.5~7 -55~125 -40~85 2500 Unit Vrms
msec duration.
Recommended Operating Conditions
Characteristic Input current, level, each channel Input current, high level, each channel Supply voltage, output out(TTL load, each channel) Operating temperature Symbol Topr Min. 6.3* Typ. Max. Unit
6.3mA guard banded value which allows least degradation. Initial input current threshold value 5.0mA less.
2002-09-25
TLP2630
Electrical Characteristics 0~70°C, unless otherwise noted)
Characteristic Input forward voltage (each channel) Input diode temperature coefficient(each channel) Input reverse breakdown voltage(each channel) Input capacitance (each channel) High level output current (each channel) level output voltage (each channel) High level supply current (both channels) level supply current (both channels) Isolation voltage Capacitance(input-output) Input-input leakage current Resistance(input-input) Capacitance(input-input) Symbol ICCH ICCL II-I RI-I CI-I Test Condition 10mA, 25°C 10mA 10µA, 25°C 1MHz 5.5V, 5.5V 250µA 5.5V, IOL(sinking) 13mA 5.5V, 5.5V, 10mA 500V, R.H. 1MHz R.H. 60%, VI-I 500V VI-I 500V 1MHz (Note (Note (Note (Note (Note Min. Typ.* 1.65 -2.0
Max. 1.75
Unit
0.005
0.25
typical values 25°C.
2002-09-25
TLP2630
Switching Characteristics =25°C VCC=5V)
Characteristic Propagation delay time output level Propagation delay time high output level Output rise time,output fall time(10~90%) Common mode transient immunity high output level Common mode transient immunity output level Symbol Test Circuit Test Condition 0®7.5mA, 15pF (each channel) 7.5mA®0, 15pF (each channel) 7.5mA, 15pF (each channel) 200V VO(min.) (each channel, Note 7.5mA, 200V VO(max.) 0.8V (each channel, Note Min. Typ. Max. Unit
tpHL tpLH tr,tf
-500
(Note below seating plane. (Note supply voltage each TLP2630 isolator must bypassed 0.01µF capacitor larger.This either ceramic solid tantalum capacitor with good high frequency characteristic should connected close possible package pins each device. (Note Device considered two-terminal device: Pins shorted together, pins shorted together. (Note CMHthe maximum tolerable rate rise common mode voltage ensure output will remain high state(i.e., VOUT 2.0V) (Note CMLthe maximum tolerable rate fall common mode voltage ensure output will remain output state(i.e., VOUT 0.8V) Measured volts microsecond(V µs). (Note Measured between pins shorted together, pins shorted together.
2002-09-25
TLP2630
Test Circuit tpHL tpLH
Pulse input =10µs Duty cycle=1/10 Monitor 0.1µF 1.5V tpHL tpLH 4.5V 7.5mA 3.75mA
1.5V 0.5V
approximately 15pF which includes probe stray wirng capacitance.
Test Circuit Transient Immunity Typical Waveforms.
200V
0.1µF
Monitor 0mA) 0.8V 7.5mA)
Pulse generator ZO=50
160(V) 160(V) (ms) (ms)
approximately 15pF which includes probe stray wirng capacitance.
2002-09-25
TLP2630
-2.6
Forward voltage temperature Coefficient
(mA)
-2.4
Forward current
-2.2
-2.0
-1.8
-1.6
0.01
-1.4
Forward voltage
Forward current
(mA)
(µA) High level output current
Output voltage
Forward current
(mA)
Ambient temperature (°C)
IOL=16mA
level output voltage
12.8mA 9.6mA 6.4mA
Output voltage
70°C
Ambient temperature (°C)
Forward current
(mA)
2002-09-25
TLP2630
tpHL, tpLH
tpLH RL=4k
tpHL, tpLH
RL=4k tpLH 350k tpLH tpHL
Propagation delay time tpHL, tpLH (ns)
tpLH tpHL
Propagation delay time tpHL, tpLH (ns)
Forward current
(mA)
Ambient temperature (°C)
RL=4k
Rise, fall time
(ns)
Ambient temperature (°C)
2002-09-25
TLP2630
RESTRICTIO PRODUCT
000707EBC
TOSHIBA continually working improve quality reliability products. Nevertheless, semiconductor devices general malfunction fail their inherent electrical sensitivity vulnerability physical stress. responsibility buyer, when utilizing TOSHIBA products, comply with standards safety making safe design entire system, avoid situations which malfunction failure such TOSHIBA products could cause loss human life, bodily injury damage property. developing your designs, please ensure that TOSHIBA products used within specified operating ranges forth most recent TOSHIBA products specifications. Also, please keep mind precautions conditions forth "Handling Guide Semiconductor Devices," "TOSHIBA Semiconductor Reliability Handbook" etc. TOSHIBA products listed this document intended usage general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products neither intended warranted usage equipment that requires extraordinarily high quality and/or reliability malfunction failure which cause loss human life bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, types safety devices, etc. Unintended Usage TOSHIBA products listed this document shall made customer's risk. Gallium arsenide (GaAs) substance used products described this document. GaAs dust fumes toxic. break, pulverize product, chemicals dissolve them. When disposing products, follow appropriate regulations. dispose products with other industrial waste with domestic garbage. products described this document subject foreign exchange foreign trade laws. information contained herein presented only guide applications products. responsibility assumed TOSHIBA CORPORATION infringements intellectual property other rights third parties which result from use. license granted implication otherwise under intellectual property other rights TOSHIBA CORPORATION others. information contained herein subject change without notice.
2002-09-25

TOSHIBA Photocoupler GaAAs Ired Photo TLP2630 Degital Logic

Top Searches for this datasheet

Other recent searches