CMOS SRAM 512K Super Power Voltage Full CMOS Static Revision

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

CMOS SRAM 512K Super Power Voltage Full CMOS Static Revision

Datasheet Thumbnail

Top Searches for this datasheet

K6F8016R6M Family
CMOS SRAM
512K Super Power Voltage Full CMOS Static
Revision History
Revision History
Initial draft Finalized Errata correction Change tWHZ 20ns 70ns product. Change 30ns 70ns product.
Draft Date
July 1999 April 2000
Remark
Preliminary Final
attached datasheets provided SAMSUNG Electronics. SAMSUNG Electronics CO., LTD. reserve right change specifications products. SAMSUNG Electronics will answer yourquestions about device. have questions, please contact SAMSUNG branch offices.
Revision April 2000
K6F8016R6M Family
FEATURES
Process Technology: Full CMOS Organization: 512K Power Supply Voltage: 1.65~2.2V Data Retention Voltage: 1.0V(Min) Three state output Compatible Package Type: 48-FBGA-8.00x12.00
CMOS SRAM
GENERAL DESCRIPTION
K6F8016R6M families fabricated SAMSUNGs advanced full CMOS process technology. families support industrial operating temperature ranges have chip scale package user flexibility system design. families also support data retention voltage battery back-up operation with data retention current.
512K Super Power Voltage Full CMOS Static
PRODUCT FAMILY
Power Dissipation Product Family K6F8016R6M-F Operating Temperature Industrial(-40~85°C) Range 1.65~2.2V Speed 701)/85ns Standby (ISB1, Typ.) 0.5µA Operating (ICC1, Max) Type 48-FBGA-8.00x12.00
parameter measured with 30pF test load.
DESCRIPTION
FUNCTIONAL BLOCK DIAGRAM
gen. Precharge circuit.
I/O9
I/O1
Addresses
select
I/O10
I/O11
I/O2
I/O3
Memory array 1024 rows columns
I/O12
I/O4
Data cont Data cont Data cont Circuit Column select
I/O13
I/O5
I/O1~I/O8
I/O9~I/O16
I/O15
I/O14
I/O6
I/O7
I/O16
I/O8 Column Addresses
48-FBGA: View (Ball Down) Name CS1, A0~A18 Function Chip Select Inputs Output Enable Input Write Enable Input Address Inputs Name Function Power Ground Upper Byte(I/O 9~16) Lower Byte(I/O 1~8)
Control Logic
1~I/O16 Data Inputs/Outputs
SAMSUNG ELECTRONICS CO., LTD. reserves right change products specifications without notice.
Revision April 2000
K6F8016R6M Family
PRODUCT LIST
Industrial Temperature Products(-40~85°C) Part Name K6F8016R6M-FF70 K6F8016R6M-FF85 Function
CMOS SRAM
48-FBGA, 70ns, 1.8/2.0V 48-FBGA, 85ns, 1.8/2.0V
FUNCTIONAL DESCRIPTION
I/O1~8 High-Z High-Z High-Z High-Z High-Z Dout High-Z Dout High-Z
I/O9~16 High-Z High-Z High-Z High-Z High-Z High-Z Dout Dout High-Z
Mode Deselected Deselected Deselected Output Disabled Output Disabled Lower Byte Read Upper Byte Read Word Read Lower Byte Write Upper Byte Write Word Write
Power Standby Standby Standby Active Active Active Active Active Active Active Active
means dont care. (Must high state)
ABSOLUTE MAXIMUM RATINGS1)
Item Voltage relative Voltage supply relative Power Dissipation Storage temperature Operating Temperature Symbol VIN, VOUT TSTG Ratings -0.2 VCC+0.3V -0.2 Unit
Stresses greater than those listed under "Absolute Maximum Ratings" cause permanent damage device. Functional operation should restricted recommended operating condition. Exposure absolute maximum rating conditions extended periods affect reliability.
Revision April 2000
K6F8016R6M Family
RECOMMENDED OPERATING CONDITIONS1)
Item Supply voltage Ground Input high voltage Input voltage Symbol 1.65 -0.23)
CMOS SRAM
Vcc+0.2
Unit
Note: A=-40 85°C, otherwise specified. Overshoot: VCC+1.0V case pulse width 20ns. Undershoot: -1.0V case pulse width 20ns. Overshoot undershoot sampled, 100% tested.
CAPACITANCE (f=1MHz, TA=25°C)
Item Input capacitance Input/Output capacitance
Capacitance sampled, 100% tested.
Symbol
Test Condition VIN=0V VIO=0V
Unit
OPERATING CHARACTERISTICS
Item Input leakage current Output leakage current Operating power supply current Symbol ICC1 Average operating current ICC2 Output voltage Output high voltage Standby Current(TTL) Standby Current(CMOS) ISB1 VIN=Vss CS1=VIH, CS2=VIL OE=VIH WE=VIL, VIO=Vss IIO=0mA, CS1=VIL, 2=VIH, WE=VIH, VIN=VIH Cycle time=1µs, 100%duty, IIO=0mA, 10.2V, CS2Vcc-0.2V, VIN0.2V VINVCC-0.2V Cycle time=Min, IIO=0mA, 100% duty, CS1=VIL, CS2=VIH, VIN=VIL 0.1mA -0.1mA CS1=VIH, CS2=VIL, Other inputs=VIH CS1Vcc-0.2V, CS2Vcc-0.2V(CS1 controlled) CS20.2V(CS2 controlled), Other inputs=0~Vcc 151) Test Conditions Unit
Super power product=7µA with special handling.
Revision April 2000
K6F8016R6M Family
OPERATING CONDITIONS
TEST CONDITIONS(Test Load Input/Output Reference)
Input pulse level: Vcc-0.2V Input rising falling time: Input output reference voltage: 0.9V Output load(see right): CL=100pF+1TTL CL=30pF+1TTL
CMOS SRAM
VTM3) R12)
CL1)
R22)
Including scope capacitance R1=3070, =3150 V=1.8V
CHARACTERISTICS (Vcc=1.65~2.2V, Industrial product: TA=-40 85°C)
Speed Bins Parameter List Symbol Read Cycle Time Address Access Time Chip Select Output Output Enable Valid Output Access Time Read Chip Select Low-Z Output Enable Low-Z Output Output Enable Low-Z Output Chip Disable High-Z Output Disable High-Z Output Output Disable High-Z Output Output Hold from Address Change Write Cycle Time Chip Select Write Address Set-up Time Address Valid Write Valid Write Write Write Pulse Width Write Recovery Time Write Output High-Z Data Write Time Overlap Data Hold from Write Time Write Output Low-Z tBLZ tOLZ tBHZ tOHZ tWHZ 70ns 85ns Units
DATA RETENTION CHARACTERISTICS
Item data retention Data retention current Data retention set-up time Recovery time Symbol tSDR tRDR Test Condition CS1Vcc-0.2V Vcc=1.2V, CS1Vcc-0.2V Unit
data retention waveform
Vcc-0.2V,CS2 Vcc-0.2V(CS1 controlled) Vcc-0.2V(CS2 controlled). Super power product=4µA with special handling.
Revision April 2000
K6F8016R6M Family
TIMMING DIAGRAMS
TIMING WAVEFORM READ CYCLE(1)
Address Data Previous Data Valid
CMOS SRAM
(Address Controlled, CS1=OE=VIL CS2=WE=VIH, or/and LB=VIL)
Data Valid
TIMING WAVEFORM READ CYCLE(2)
(WE=VIH)
Address
tBHZ tOLZ tBLZ Data Valid tOHZ
Data
High-Z
NOTES (READ CYCLE) tOHZ defined time which outputs achieve open circuit conditions referenced output voltage levels. given temperature voltage condition, tHZ(Max.) less than tLZ(Min.) both given device from device device interconnection.
Revision April 2000
K6F8016R6M Family
TIMING WAVEFORM WRITE CYCLE(1) Controlled)
Address tCW(2) tWR(4)
CMOS SRAM
tWP(1) tAS(3) Data High-Z tWHZ Data Data Undefined Data Valid High-Z
TIMING WAVEFORM WRITE CYCLE(2) (CS1 Controlled)
Address tAS(3) tWP(1) Data Data Valid tCW(2) tWR(4)
Data
High-Z
High-Z
Revision April 2000
K6F8016R6M Family
TIMING WAVEFORM WRITE CYCLE(3) (UB, Controlled)
Address tCW(2) tAS(3) tWP(1) Data Data Valid tWR(4)
CMOS SRAM
Data
NOTES (WRITE CYCLE)
High-Z
High-Z
write occurs during overlap(tWP) write begins when goes goes with asserting single byte operation simultaneously asserting double byte operation. write ends earliest transition when goes high goes high. measured from beginning write write. measured from going write. measured from address valid beginning write. measured from write address change. applied case write ends going high.
DATA RETENTION WAVE FORM
controlled
1.65V tSDR Data Retention Mode tRDR
1.4V CS1VCC 0.2V, LB=UBVCC 0.2V
CS1,LB/UB
controlled
1.65V tSDR
Data Retention Mode
tRDR
0.4V CS20.2V
Revision April 2000
K6F8016R6M Family
PACKAGE DIMENSION
BALL FINE PITCH BGA(0.75mm ball pitch)
View Bottom View
CMOS SRAM
Unit: millimeters
INDEX MARK 0.50 0.50
C1/2 Detail 0.25/Typ. 0.85/Typ. Notes. Bump counts: 48(8row 6column) Bump pitch (x,y)=(0.75 0.75)(typ.) tolerence +/-0.050 unless otherwise specified. Typical coplanarity: 0.08(Max)
Side View
7.90 11.90 0.30 0.20
0.75 8.00 3.75 12.00 5.25 0.35 1.10 0.85 0.25
8.10 12.10 0.40 1.20 0.30 0.08
Revision April 2000
0.30

CMOS SRAM 512K Super Power Voltage Full CMOS Static Revision

Top Searches for this datasheet

Other recent searches