Vishay Beyschlag Flat Chip Resistor Array Advanced thin film

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Vishay Beyschlag Flat Chip Resistor Array Advanced thin film

Datasheet Thumbnail

Top Searches for this datasheet

ACAC 0612 Precision
Vishay Beyschlag
Flat Chip Resistor Array
Advanced thin film technology Superior overall stability Four resistors substrate Tight T.C. ppm/K T.C. tracking ppm/K, ppm/K request) Tolerance 0.25 matched tolerance Different resistance values possible Pure termination barrier layer ACAC 0612 flat chip resistor array combines proven reliability precision products with advantages chip array. possibility tolerance matching T.C. tracking makes this product perfectly suited applications with outstanding requirements towards stable fixed resistor ratios. small package enables design high density circuits combination with reduction assembly costs. Different resistance values realized substrate. Compatible with lead (Pb)-free lead containing soldering processes Lead (Pb)-free RoHS compliant
APPLICATIONS
Precision analogue circuits Voltage divider Feedback circuits Signal conditioning
TECHNICAL SPECIFICATIONS
DESCRIPTION size Metric size Configuration, isolated Design: equal pairs different values Resistance values Tolerance: absolute matching Temperature coefficient: absolute tracking Max. resistance ratio Rmin/Rmax Climatic category (LCT/UCT/days) Rated dissipation: P702) element package Operating voltage Film temperature Insulation voltage (Uins) against ambient between isolated resistors, continuous Note Resistance values selected from E96. power dissipation resistor generates temperature rise against local ambient, depending heat flow support printed-circuit board (thermal resistance). rated dissipation applies only permitted film temperature exceeded. ACAC 0612 0612 1632M 0603 0.25 ppm/K ppm/K 55/125/56
Document Number: 28741 Revision: 28-Nov-05
technical questions contact: ff3aresistors@vishay.com
www.vishay.com
ACAC 0612 Precision
Vishay Beyschlag
12NC INFORMATION
arrays have 12-digit numeric code starting with 2312. subsequent digits indicate array packing body size; 12NC table. last digits indicate termination individual array design number (last digits).
Flat Chip Resistor Array
12NC resistor array type packing
DESCRIPTION TYPE T.C. TOL. ORDERING CODE 2312 (ALL EQUAL) (TWO PAIRS) UNITS 09001 09002 09003 UNITS 19004 19005 19006 19007
ACAC 0612
ppm/K
Note 12NC indicating resistor array type packing table shows standard array types with resistance divider ratio Please consult Vishay BEYSCHLAG specific divider ratio, temperature coefficient, tolerance ohmic values.
PART NUMBER PRODUCT DESCRIPTION2)
PART NUMBER3): ACAC06P0839001P500
MODEL ACAC
SIZE
TERMINAL concave
SPECIAL standard
SCHEMATIC
DESIGN NUMBER Design number available request
PACKING4) DESIGN Equal Pairs Different Values
Pins
PRODUCT DESCRIPTION: ACAC 9001
MODEL Array
PRODUCT Flat chip
SIZE 0612
TERMINATION Concave
9001 DESIGN NUMBER Design number available request
PACKING4)
Note Products ordered using either PRODUCT DESCRIPTION PART NUMBER shown facilitate introduction unified part numbering system. Currently, this PART NUMBER applicable Americas only. Please refer table PACKING, page
DIMENSIONS
view
Bottom view
DIMENSIONS CHIP resistor array view, mass relevant physical dimensions
TYPE ACAC 0612 (mm) 0.15 (mm) 0.15 (mm) 0.55 (mm) (mm) 0.15 (mm) 0.15 (mm) (mm) min. 0.15 mass (mg) 9.41
DIMENSIONS CHIP resistor array bottom view, mass relevant physical dimensions
TYPE ACAC 0612 www.vishay.com (mm) 0.15 (mm) 0.15 (mm) 0.55 (mm) (mm) 0.15 (mm) 0.15 (mm) (mm) min. 0.25 mass (mg) 9.41
technical questions contact: ff3aresistors@vishay.com
Document Number: 28741 Revision: 28-Nov-05
ACAC 0612 Precision
Flat Chip Resistor Array
Vishay Beyschlag
PACKING
PACKING CODE MODEL TAPE WIDTH DIAMETER mm/7" mm/7" mm/13" PIECES 1000 5000 10000 PITCH PAPER TAPE ACAC
APPLICATION INFORMATION
Equivalent circuit. (SCHEMATIC Array configuration.
DESCRIPTION
Production strictly controlled follows extensive instructions established reproducibility. homogeneous film metal alloy deposited super high grade ceramic substrate conditioned achieve desired temperature coefficient. Specially designed inner contacts deposited both sides. special laser used achieve target value smoothly cutting meander groove resistive layer without damaging ceramics. resistor elements covered protective coating designed electrical, mechanical climatic protection. terminations receive final pure nickel plating. result determined production verified extensive testing procedure optical inspection performed individual chip resistors. Only accepted products laid directly into paper tape accordance with 286-3.
ASSEMBLY
resistors suitable processing automatic assembly systems automatic soldering using wave, reflow vapour phase. encapsulation resistant cleaning solvents commonly used electronics industry, including alcohols, esters aqueous solutions. resistors lead (Pb)-free, pure plating provides compatibility with lead (Pb)-free lead-containing soldering processes. immunity plating against whisker growth been proven under extensive testing. products comply with CEFIC-EECA-EICTA list legal restrictions hazardous substances: This includes full compliance with following directives: 2000/53/EC Vehicle life Directive (ELV) 2000/53/EC Annex Vehicle Life Directive (ELV 2002/95/EC Restriction Hazardous Substances Directive (RoHS) 2002/96/EC Waste Electrical Electronic Equipment Directive (WEEE) Solderability specified years after production re-qualification. permitted storage time years.
APPROVALS
Where applicable, resistors tested accordance with 401-801 (superseding CECC 40401-801) which refers 115-1) (IEC 115-8).
Document Number: 28741 Revision: 28-Nov-05
technical questions contact: ff3aresistors@vishay.com
www.vishay.com
ACAC 0612 Precision
Vishay Beyschlag
TESTS REQUIREMENTS
Essentially tests carried accordance with following specifications: 115-1, Generic specification (includes tests) 115-1, Sectional specification (includes schedule qualification approval) testing also covers most requirements specified EIA/IS-703 JIS-C-5202. tests carried accordance with under standard atmospheric conditions according 068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, days) valid. Unless otherwise specified following values apply: Temperature: Relative humidity: pressure: (860 mbar mbar). components mounted testing boards accordance with 115-1, 4.31 unless otherwise specified. following table only tests requirements listed with reference relevant clauses 115-1 068-2; short description test procedure also given.
Flat Chip Resistor Array
TEST PROCEDURES REQUIREMENTS
60115-1 CLAUSE 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS1) PERMISSIBLE CHANGE (R/R)
stability product types: ACAC 0612 4.8.4.2 4.25.1 resistance temperature coefficient endurance Umax; off; 1000 1000 days; Umax; min. min. UCT; cycles reflow method forced convention); (260 solder bath method; (215 0.3) 1632M; Urms Uins; against ambient, between adjacent resistors 0.25 ppm/K (0.25 0.05
4.25.3 4.24 4.13 4.19 4.18.2
(Cab) (Na) (Tb)
endurance upper category temperature damp heat, steady state short time overload2) rapid change temperature resistance soldering heat solderability
(0.5 0.05 (0.5 0.05 (0.1 0.01 visible damage (0.1 0.01 visible damage (0.1 0.01 visible damage good tinning covered); visible damage visible damage flashover breakdown
4.17.2
(Ta)
4.32
(Ue3)
shear (adhesion) voltage proof
Note Figures given equal values. single element.
www.vishay.com
technical questions contact: ff3aresistors@vishay.com
Document Number: 28741 Revision: 28-Nov-05
Legal Disclaimer Notice
Vishay
Notice
Specifications products displayed herein subject change without notice. Vishay Intertechnology, Inc., anyone behalf, assumes responsibility liability errors inaccuracies. Information contained herein intended provide product description only. license, express implied, estoppel otherwise, intellectual property rights granted this document. Except provided Vishay's terms conditions sale such products, Vishay assumes liability whatsoever, disclaims express implied warranty, relating sale and/or Vishay products including liability warranties relating fitness particular purpose, merchantability, infringement patent, copyright, other intellectual property right. products shown herein designed medical, life-saving, life-sustaining applications. Customers using selling these products such applications their risk agree fully indemnify Vishay damages resulting from such improper sale.
Document Number: 91000 Revision: 08-Apr-05
www.vishay.com

Vishay Beyschlag Flat Chip Resistor Array Advanced thin film

Top Searches for this datasheet

Other recent searches