v00.0407 MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8 noise
|
|
|
Top Searches for this datasheet
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
noise MMIC w/Half Frequency, Divide-by-4 Outputs for: Point Point/Multipoint Radio Test Equipment Industrial Controls SATCOM Military End-Use
Features
Triple Output: 10.8 Fo/2 Fo/4 Pout: Phase Noise: -110 dBc/Hz @100 Typ. External Resonator Needed Leadless Package,
Functional Diagram
General Description
HMC512LP5 HMC512LP5E GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. HMC512LP5 HMC512LP5E integrate resonators, negative resistance devices, varactor diodes feature half frequency divide-by-4 outputs. VCO's phase noise performance excellent over temperature, shock, process oscillator's monolithic structure. Power output typical from supply voltage. prescaler RF/2 functions disabled conserve current required. voltage controlled oscillator packaged leadless surface mount package, requires external matching components.
VCOS PLOs
Electrical Specifications, +25° (Dig), (Amp), (RF)
Parameter Frequency Range Fo/2 RFOUT RFOUT/2 RFOUT/4 -110 Vtune Icc(Dig) Icc(Amp) Icc(RF) Min. Typ. 10.8 Max. Units dBc/Hz MHz/V MHz/°C
Power Output Phase Noise Offset, Vtune= RFOUT Tune Voltage Supply Current Tune Port Leakage Current (Vtune= 12V) Output Return Loss Harmonics/Subharmonics
Pulling (into 2.0:1 VSWR) Pushing Vtune= Frequency Drift Rate
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
Frequency Tuning Voltage,
11.2 OUTPUT FREQUENCY (GHz) 10.8 10.4 TUNING VOLTAGE (Volts)
+25C +85C -40C
Frequency Tuning Voltage, 25°C
11.2 OUTPUT FREQUENCY (GHz) 10.8 10.4 TUNING VOLTAGE (Volts)
Vcc= 4.75V Vcc= 5.00V Vcc= 5.25V
OUTPUT POWER (dBm) SENSITIVITY (MHz/Volt) TUNING VOLTAGE (Volts)
+25C +85C -40C
TUNING VOLTAGE (Volts)
+25C +85C -40C
Phase Noise Tuning Voltage
PHASE NOISE (dBc/Hz) -100 -105 -110 -115 -120 -125 TUNING VOLTAGE (VOLTS)
10khz 100khz
Phase Noise Vtune
PHASE NOISE (dBc/Hz) -100 -120 -140 -160 -180
+25C +85C -40C
TUNING VOLTAGE (VOLTS)
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
VCOS PLOs
Sensitivity Tuning Voltage,
Output Power Tuning Voltage,
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
RFOUT/2 Output Power Tuning Voltage,
OUTPUT POWER (dBm)
+25C +85C -40C
RFOUT/2 Frequency Tuning Voltage,
OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (Volts)
+25C +85C -40C
TUNING VOLTAGE (Volts)
VCOS PLOs
Divide-by-4 Frequency Tuning Voltage,
OUTPUT FREQUENCY (GHz) OUTPUT POWER (dBm) TUNING VOLTAGE (Volts)
+25C +85C -40C
Divide-by-4 Output Power Tuning Voltage,
TUNING VOLTAGE (Volts)
+25C +85C -40C
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
Absolute Maximum Ratings
Vcc(Dig), Vcc(Amp), Vcc(RF) Vtune Junction Temperature Continuous Pdiss (T=85 (derate 43.5 mW/C above Thermal Resistance (junction ground paddle) Storage Temperature Operating Temperature Sensitivity (HBM) +5.5 +15V 2.17 °C/W +150 Class
Typical Supply Current
4.75 5.00 5.25 (mA)
Note: will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
Outline Drawing
VCOS PLOs
NOTES: LEADFRAME MATERIAL: COPPER ALLOY DIMENSIONS INCHES [MILLIMETERS] LEAD SPACING TOLERANCE NON-CUMULATIVE. BURR LENGTH SHALL 0.15mm MAXIMUM. BURR HEIGHT SHALL 0.05mm MAXIMUM. PACKAGE WARP SHALL EXCEED 0.05mm. GROUND LEADS GROUND PADDLE MUST SOLDERED GROUND. REFER HITTITE APPLICATION NOTE SUGGESTED LAND PATTERN.
Package Information
Part Number HMC512LP5 HMC512LP5E Package Body Material Stress Injection Molded Plastic RoHS-compliant Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Rating MSL1 MSL1
Package Marking H512 XXXX H512 XXXX
peak reflow temperature peak reflow temperature 4-Digit number XXXX
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
Descriptions
Number 1-3, 8-11, 13-18, 22-28, 30-32 Function Description Connection. These pins connected ground. Performance will affected. Interface Schematic
RFOUT/4
Divide-by-4 output. block required.
VCOS PLOs
(Dig)
Supply voltage prescaler. prescaler required, this left open conserve approximately current.
(Amp)
Supply voltage RFOUT/2 output. RFOUT/2 required, this left open conserve approximately current.
RFOUT/2
Half frequency output coupled).
output coupled).
(RF)
Supply Voltage,
VTUNE
Control voltage modulation input. Modulation bandwidth dependent drive source impedance. "Determining Bandwidth Wideband Varactor Tuned VCO" application note.
Package bottom exposed metal paddle that must connected RF/DC ground.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
Evaluation
VCOS PLOs
List Materials Evaluation 110227
Item Description Mount Connector Header Capacitor, 0402 Pkg. 1,000 Capacitor, 0402 Pkg. Tantalum Capacitor HMC512LP5 HMC512LP5E 110225 Eval Board Reference this number when ordering complete evaluation Circuit Board Material: Rogers 4350
circuit board used final application should circuit design techniques. Signal lines should have impedance while package ground leads backside ground paddle should connected directly ground plane similar that shown. sufficient number holes should used connect bottom ground planes. evaluation circuit board shown available from Hittite upon request.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
Typical Application Circuit
VCOS PLOs
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC512LP5 512LP5E
v00.0407
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 10.8
Notes:
VCOS PLOs
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
Other recent searches
TDA7381 - TDA7381 TDA7381 Datasheet
JAS53P4 - JAS53P4 JAS53P4 Datasheet
IRFI624GPbF - IRFI624GPbF IRFI624GPbF Datasheet
AP9926GEO - AP9926GEO AP9926GEO Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
