FieldIT Electromagnetic Flowmeter FSM4000 Level Information

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

FieldIT Electromagnetic Flowmeter FSM4000 Level Information

Datasheet Thumbnail

Top Searches for this datasheet

D184S073U02
FieldIT Electromagnetic Flowmeter FSM4000
Level Information
Function
Electromagnetic flowmeters used accurately measure flowrate liquids, slurries, pastes sludges with electrical conductivity least µS/cm (opt. µS/cm).
Applications
SM4000 specially designed measure liquids pulp paper food beverage industry. used measure pulp stocksflows, fast changing process, phase liquids, mining slurries pulsating flows (pist pump application).
Instrument Advantages
Digital Signal Processing (DSP) assures long term stability accuracy both flow directions with absolute zero stability. Integrated diagnostic tools including system monitoring with error analysis displayed signalled over contact output increased operational reliability. Easy menu driven operating structure application configuration. Easy read full graphic display backlighted.
Important Instrument Features
flowmeter primary designed Guideline 97/23 diameter range from 1000 [1/25" 40"] accuracy rate fluid temperatures (opt. Hygienic Certification FML, EHEDG liners, PFA, PTFE, hard rubber standardized installation lengths ANSI flanges Power supply voltage AC/DC
Electromagnetic Flowmeter FSM4000 D184S073U02
Accuracy, Reference Conditions Operating Principle
Reference Conditions 29104
Fluid Temperature Ambient Temperature Supply Power Nominal voltage name plate Reference installation conditions Upstream Downstream nominal size flowmeter primary Warm-up Time Analog Output Effects Same pulse output plus rate 0.01 Pulse Output 0.05 Rangemax rate 0.05 Rangemax 0.00025 Rangemax
Operating Principle
Faraday's Laws Induction form basis electromagnetic flowmeters. states that voltage induced conductor moves through magnetic field. This principle applied conductive fluid which flows through magnetic field generated perpendicular flow direction (see Schematic). voltage induced fluid maesured electordes, installed diametrically opposed. This signal voltage proportional magnetic induction electrode spacing average flow velocity Noting that magnetic induction electrode spacing constants, proportionality exists between signal voltage average flow velocity equation volume flow shows that signal voltage linear proportional volume flowrate. induced signal voltage processed converter into scaled, analog digital signals.
Magnet Coil
Meter Tube Electrode Plane
Signal electrode
Accuracy
Signal voltage
Range
Signal voltage Magnetic induction Electrode spacing Average flow velocity Volume flowrate
Fig.
Accuracy
Fig.
Electromagnetic Flowmeter Schematic
Electromagnetic Flowmeter FSM4000 D184S073U02
Overview, Flowmeter Primary Converter Design
Variable Connections Connection Types
Weld stubs
Rigid Flanges
Wafer Design
Rigid Flanges
3-DN 1/10"-1 1/2"
Pipe fitting Food industry fitting
3-DN 1/10"-1 1/2"
Tri-Clamp
External threads
50-DN
Additional, Dimensions, Others upon request
50-DN 2"-4"
Accuracy Flowmeter primary hsg. material
rate Complete stainless steel housing Series 2000 SE21* Inch 1/10 1/10-4 1/10 SE21F
Alum. Series 4000
Flowmeter Primary
Model Number
Process Connections
Wafer Design Flanged 2501 Flanged ASME B16.5 Food Industry Fitting 11851
3-100 3-100 3-100
Weld stubs 11850
Weld stubs 2463
Weld stubs 2037
Clamp 32676 External threads 1/8" Sanitary connectors Liner Conductivity Electrodes Process connection material Protection Class 60529 Fluid temperature
1/10 3-40 1/2, 1/10 3-40 1/2, 1/10 3-40 1/2, 25-40 1/2, 1/10 3-50 1/10 3-25 1/25 1/12 PEEK, Torlon (<DN 3[1/10"]) (>DN [1/12"])
SE41F SE21W Inch 3-50 1/10 10-40 65-100 1/2-4 10-16 10-40 DN3-DN1000 3-100 10-40 CL150 1/10"-4"150-300 CL/JIS 1/10 CL300/JIS 1/10"-40" CL150/JIS 1/10"-12"
Hard rubber, soft rubber, PTFE, PFA, others
S/cm Option µS/cm 1.4571 [316Ti], 1.4539, Hastelloy Platinum Iridium, Tantalum, Titanium Steel,SSTNo.1.4571[316Ti] 1.4571 [316Ti] SST1.4404[316L] CIP/SIP capable FML, EHEDG AC/DC 0/2-10 0/4-20 active optocoupler (220 HART Protocol® (PROFIBUS preparation) yes, from [3/8"] S/cm yes, manual entry (totalize indicate mass units) NEMA Field mount housing capable
Approvals
Hygienic sterile requirements
Converter
Model Number Supply power Current output standard Pulse output, channel std. Ext. Zero return Ext. Totalizer reset Forward/reverse metering Communication Fluid monitor std. Detection empty pipe Local indicator/totalizer Auto. density correction Protection Class 60529 Housing
Electromagnetic Flowmeter FSM4000 D184S073U02
Specifications: Flowmeter Primary
Flow Ranges, Meter Sizes Pressure Ratings
Meter Std. Pressure Size Rating Inch 1/25 1/17 1/12 1/10 5/32 5/16 10/16 10/16 10/16 10/16 10/16 Cl150 Min. Flow Range Flow Velocity 0.03 l/min 0.06 l/min l/min l/min l/min l/min l/min 2.25 l/min l/min l/min l/min l/min l/min m3/h m3/h m3/h m3/h m3/h m3/h m3/h' m3/h m3/h m3/h m3/h m3/h m3/h Max. Flow Range Flow Velocity l/min l/min l/min l/min l/min l/min l/min l/min l/min l/min l/min l/min l/min m3/h m3/h m3/h m3/h m3/h m3/h 1080 m3/h 1800 m3/h 2400 m3/h 3300 4500 6000 6600 m3/h m3/h m3/h m3/h
Flange Designs Pressure Ratings
Meter Size Flanges 1/10" 1/4" 1/2" 1/2" 1000 ASME ASME ASME ASME ASME ASME ASME ASME ASME ASME ASME ASME ASME Material SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel SS1.4571[316Ti] Steel Press. Rating 150, 150, Conformity Evaluation Category III, Module Fluid Group 150, 150, 150, 150, 150, 150, 150, Art.3 Par.
SS1.4571[316Ti] Steel 150, SS1.4571[316Ti] Steel 150, SS1.4571[316Ti] Steel 150, SS1.4571[316Ti] Steel
100040
m3/h m3/h m3/h 1200 m3/h 1350 m3/h
9600 m3/h 13200 m3/h 18000 m3/h 24000 m3/h 27000 m3/h
Other meter sizes, press. ratings, temperature classes upon request.
Designs
Information: When preamplifier installed conditivity applications fluid high (e.g. demineralized water fluid velocity limited m/s. Meter tube Stainless steel 1.4301 [304] [1/10" 12"] piece housing: Cast Alum., painted1) Flanges Steel, zinc plated, standard Stn. 1.4571[316Ti] DN15[1/2"] standard) 1000 [14" 40"] Steel, welded design, painted1) Flanges Steel, painted, standard, stn. stl. 1.4571[316Ti] Connection Body: 70122) Cover: 90021) Paint coat thick, 9002 (white grey), painting page Paint coat thick, 7012 (Basalt grey)
Electromagnetic Flowmeter FSM4000 D184S073U02
Installation Length, Flanged (Short Design) Meter sizes [3/8"-16"] correspond DIN/ANSI Flanged design VDE/VDI 2641 installation lengths defined DVGW Working Paper, W420 (Water Totalizers, Design 4064 Short well 13359). ANSI 150/CL With PFA, installation length, flanged 13359 with PTFE, Hard/soft rubber Installation length, flanged 13359 (Installation length Series 1000) Pipeline Vibrations Max. allow. m/s2
Material strength Model SE41F
Attention: Limits allowable fluid temperature (TS) allowable pressure (PS) function liner flange materials flowmeter (see instrument Name Plate). Material Strength Curves Liner: PTFE, hard/soft rubber (limited
High temperature range
Druck Pressure (PS) [bar]
Temperature Diagram
Ambient Temperature
130140150160170180190
Temperatur Temperature (TS) [°C]
Fluid Temp.
Fig.
Flanges 1.4571[316Ti] [24"]
Liner: PTFE, hard/soft rubber (limited
300lb High temperature range
Standard Flanges Stn. Stl. used entire range
797.5 652.5 507.5
High Temperature Design
Druck Pressure (PS) [bar]
150lb
Note: Max. measuring temperature hard /soft rubber
362.5 217.5 72.5
Fig.
Fluid Temperature Function Ambient Temperature
Max. Allowable Cleaning Temperatures PTFE, Designs
Cleaning Steam cleaning Liquid cleaning Liner Primary PTFE, PFA, PEEK, Torlon PTFE, PFA, PEEK, Torlon Tmax tmax Minutes TAmb.
Druck Pressure (PS) [bar]
Temperatur Temperature (TS) [°C]
0.01
Fig.
ANSI Flanges 1.4571[316Ti] [24"]
Liner: PTFE, hard/soft rubber (limited
High temperature range
ambient temperature difference must subtracted from max. cleaning temperature. Tmax (TAmb. °F]) Weight Dimensions
Min. allowable Pressure Fluid Temperature
Liner material Hard rubber Soft rubber PTFE Meter size 1000 1000 inch 1/2-40 2-40 3/8-24 1/10-4 TOperation mbar TOperation
Temperatur Temperature (TS) [°C]
Fig.
Flanges Steel [24"]
Other meter sizes, pressure ratings Temperature Classes upon quest
Electromagnetic Flowmeter FSM4000 D184S073U02
Liner: PTFE, hard/soft rubber (limited
P/T-Ratings
Hochtemperaturbereich High temperature range
Specifications: Stainless Steel Flowmeter Primaries, Model SE21_, [1/25"
797.5 652.5
Druck Pressure (PS) [bar]
300lb
Connection Overview Series 2000 Model: Process Connections
150lb
SE21
507.5 362.5 217.5
1/8" Sanitary Connectors
Clamp 32676
External Threads
Food Industry Fitting 11851
Weld Stubs 11850
Weld Stubs 2463
Temperatur Temperature (TS) [°C]
0.01
Fig.
ANSI Flanges Steel [24"]
1/25" 1/12" 1/10" 5/32" 1/4" 5/16" 3/8" 1/2" 3/4"
Flange
Weld Stubs 2037
Meter Size
72.5
Wafer Design Conformity. Evaluation Category Module B1+D, Fluid Group Art. Par.
10K-B2210 Flanges 1.4571 [316Ti] Steel Meter Size Inch 32-100 Material [°C] +180 +180 [bar]
32-100 1.4571[316Ti] Steel Liner: PTFE, hard/soft rubber (limited Liner: Hard/soft rubber (194
Druck Pressure (PS) [bar]
1/4"
1000 PN10 1000
1/2"
1/2"
Temperatur Temperature (TS) [°C]
Fig.
Flange 1.4571 [316Ti] [28"]-DN 1000 [40"]
Material Strength Curves Flanged Flowmeters Model SE21F Liner:
Liner: Hard/soft rubber (194
Druck Pressure (PS) [bar]
Druck Pressure (PS) [bar]
1000 1000
Temperatur Temperature (TS) [°C]
Temperatur Temperature (TS) [°C]
Fig.
Flanges Steel [28"]-DN 1000 [40"]
Fig.
Flanges 1.4571 [316Ti] 100,
Electromagnetic Flowmeter FSM4000 D184S073U02
Liner:
Ambient Conditions
Ambient Temperature
300lb
Druck Pressure (PS) [bar]
+140 Fluid Temperature 3-100 +130 capable, Temperature Diagram max. allowable cleaning temperature. maximum allowable ambient temperature function fluid temperature stainless steel process connections Wafer Design
Ambient Temperature
150lb
Temperatur Temperature (TS) [°C]
Fig.
ANSI Flanges 1.4571 [316Ti] 100,
Ratings
Material Strength Curve Wafer Design Model SE21W Liner:
652.5
40/CL
Fluid Temp.
Fig.
Temperature Diagram
Druck Pressure (PS) [bar]
507.5
Fluid Temperature [1/25"-1/12"] +120 °F], capable max.
362.5
Storage Temperature +158
16/CL
217.5
Minimum Allowable Absolute Pressure
Liner Peek/Torlon Meter Size Inch 3-100 1/10 1/25 1/12 POperate mbar TOperate 130*)
72.5
110120130*)
Temperatur Temperature (TS) [°C]
Maximal Allowable Fluid Temperature Pressure
Fig. 10K-B2210 Wafer Design Meter Size 32-100 1/4" Material 1.4404[316L] 1.4435[316L] 1.4301[304] [°C] +130 +266 [bar] Weld stubs Process Connections Liner Wafer Design Meter Size Inch 3-50 1/10-2 65-100 1/2-4 3-40 1/10-1 1/2, 3-50 1/10-2 65-100 1/2-4 3-40 1/10-1 1/2, 3-25 1/10-1 1/25-1/12 130*) 130*) 130*) 130*) 130*) 130*) 130*) 130*) 130*)
Clamp Food Industry fittings
External threads 1/8" Sanitary connectors Liner Peek/Torlon
Process Connections
[1/25"-1/12"] 1/8" Sanitary connectors with grounding electrodes same material signal electrodes, standard 3-100 [1/10"-4"] Higher temperature allowed CIP/SIP cleaning limited time periods, Table ,,Maximum Allowable Cleaning Temperature" Wafer Design, Clamp, Food Industry Fittings, External threads. Others upon request
Electromagnetic Flowmeter FSM4000 D184S073U02
Maximal Allowable Cleaning Temperature
Cleaning Steam Liquid cleaning Liner PFA/Peek PFA/Peek/Torlon Tmax Tmax Minutes TAmb
Specification painting
Type painting Epoxy powder coating Priming coat priming coating Preparing surface Cleaning high alkaline bath, Alodine procedure conversion layer better adherion painting Thickness painting Color 9002 (White grey) 7012 (Basalt grey)
ambient temperature difference must subtracted from max. cleaning temperature. Tmax (TAmb. °F].
Maximal Allowable Temperature Shock
Liner PFA, Peek, Torlon Temp. Shock max. Temp. Diff. arbitrary Temp. Gradient °C/min arbitrary
Specifications Flowmeter Primary
Flowmeter Primary Materials
Liner Materials PFA, Peek, Torlon Electrode Materials Standard Others Hast. Hast. (1.4539 1.4539 1.4571[316Ti] Food Ind. fittings Tantalum, Titanium, Platinum Iridium Clamp) Electrode Design Standard Others Flat head Conical head DN10 [3/8"]) 1.4539 Option
Process Connection Materials Flange Wafer Design Weld stubs Food Ind. fittings Clamp External threads 1/8" Sanitary connectors Connection Meter tube Cable connector Primary housing
Standard
1.4571 [316Ti] upon req. none 1.4404 [316L] upon req. 1.4404 [316L] upon req. 1.4404 [316L] upon req. 1.4404 [316L] upon req. 1.4571 [316Ti] POM, Brass, Stainless Steel 1.4301 [304] Polyamide PVDF Deep drawn housing 1.4301[304] Gasket Materials none EPDM (Ethylene Propylene) std. with Approval (CIP capable, grease) Silicone with Approval (option, suitable grease) Silicone (suitable grease)
Process Connection Material Wafer Design, Weld stubs, Food Ind. fitting Clamp External threads Flat housing gaskets Protection Class
Standard with connector 13.5 resin compound Pipeline Vibration Maximum allowable m/s2 (10-150
Electromagnetic Flowmeter FSM4000 D184S073U02
Specifications: Flowmeter Primary, Flowrate Nomographs
Flowrate Nomograph
l/min m3/h
l/min m3/h
Example
10-1
10-1
10-2
10-1
10-3
10-3
Fig.
Flowrate Nomograph [1/25"
Fig.
Flowrate Nomograph 1000 40"]
Flowrate Nomographs volume flowrate function flow velocity flowmeter size. Flowrate Nomographs, Fig. Fig. indicate flowrate range specific flowmeter size which flowmeter sizes suitable specific flowrate.
Example: Flowrate m3/h (Maximum value range value). Suitable flowmeter sizes [3/4" /12"] flow velocity between m/s.
Electromagnetic Flowmeter FSM4000 D184S073U02
Specifications: Flowmeter Primary, Installation Requirements Grounding
Downstream Straight Sections Flowmeter installation accurata flow measurement system. rule thump, generally pipe diameters uystream pipe diameters downstream sufficient. Other upstream obstructions however, such double elbows plane, control valves nonconcentric pipe reducers etc. require longer lengths. Grounding Grounding flowmeter primary necesary only safety reasons also assure proper opration electromagnetic flowmeter. grouding screws flowmeter primary, which correspond 0100, Part 540, connected earth potential. measurement reasons this potential should identical fluid potential possible. applications using plastic insulating lined pipelines ground connections made utilizing grouding plates grounding electrodes. stray currents present pipeline, grounding plates downstream flowmeter primary recommended. Electrode Axis Neither electrode should positioned highest pont pipeline horizontal installations. bubbles, which present fluid, could interrupt electrical connection between electrodes fluid. ideal installation shown Fig. Assure that meter tube always completely filled with fluid. Instrument designs with removable electrodes cleaning available upon request.
Installations Larger Size Pipelines flowmeter installed larger size pipelines without problems using reducer sections. pressure drop when reducers used determined from Nomograph Fig. procedure determining pressure drop follows: Determine diameter ratio d/D. Calculate flow velocity function flowmeter size flowrate:
(flowrrate) -Primary Constant
flow velocity also determined from Flowrate Nomographs, Fig. Fig. Fig. read "Pressure drop" value, axis, intersection "Diameter Ratio", axis, "Flow Velocity" curve.
Flanged Reducer
inside diameter Pipe inside diameter Flow velocity Pressure drop mbar
Pressure Drop Nomograph Flanged reducers with
Electrode Axis
v=8m/s 7m/s 6m/s
Pressure Drop [mbar]
5m/s
4m/s
3m/s
2m/s
Fig.
Electrode Axis
Diameter Ratio Fig. Pressure Drop Nomograph
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Flowmeter Primary [1/10"-12"], Flanges
Model SE41F
Cable Connector
Cable Connector
Number Holes
Number Holes
Tolerances
3-200 1/10"-8" 250-300 10"-12"
Weight
Flange Dimensions PN1) 10-40 10-40 10-40 10-40 10-40 10-40 10-40 10-40 10-16 25-40 10-40 10-16 25-40 10-16 25-40 10-16 25-40
Instrument Dimensions
(pound) 5.51 6.61 6.61 7.72 8.82 11.02 13.23 17.64 26.45 26.45 35.27 33.07 33.07 50.71 66.14 61.73 74.96 119.05 119.05 176.37 176.37
182.98 202.82 Other pressure ratings upon request. Standard with grounding plate mounted flange 1.4571 [316Ti]. Other materials upon request. also Information "Grounding". 3-100 125-300 With protection flanges. Protection flanges replace grounding plates. 3-100 125-300 Series 1000 (for replacement only) also available with protection flanges, Dimensions page high temperature design
dim's Fig. Flowmeter Primaries [1/10: 12"]
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Flowmeter Primary [1/10"-12"], ANSI Flanges
Model SE41F
Cable Connector
Cable Connector
Number Holes
Number Holes
Tolerances 3-200 1/10"-8" 250-300 10"-12" Weight
Meter Instrument Dimensions ANSI 150/CL Size L1)2) Inch 13359 (Ser.1000)
Flange Dimensions ANSI
Flange Dimensions ANSI
(pound)
CL150/300
1/10-5/16 3/8,
36/38 124/181
5.51 6.61 7.72 8.82 11.02 13.23 17.64 26.45 35.27 33.07 79/84 83.77 145.50 216.05 273/399
Standard with grounding plate mounted flange 1.4571[316Ti]. Other materials upon request. also Information "Grounding". 3-100 125-300 With protection flanges. Protection flanges replace grounding plates. 3-100 125-300 Series 1000 replacement only) also available with protection flanges, Dimensions page high temperature design
dim's Fig. Flowmeter Primaries [1/10: 12"], ANSI Flanges
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Flowmeter Primary 1000 [14"-40"], Flanges
Model SE41F
Cable Connector
Number Holes
Tolerances 350-500 14"-20" 600-1000 24"-40"
Flange Dimensions PN1) 1015 1025 1115 1125 1050 1050 1005 1000
Instrument Dimensions 1040 1040 1170 1170 1045 1045 1175 1175 1050 1050 1180 1180
Weight appr. (pound) 1030 1065 1250 1047 1268 1684
1300 1305 1310 1175 1120 1080 1000 1300 1305 1310 1230 1160 1110 1000 1300 1305 1310 1255 1170 1115 1000 Other pressure ratings upon request. grounding plate mounted flange 1.4571[316Ti]. Other materials upon request. With protection plates mounted both flanges, grounding plate required Series 1000 (for replacement only) also available with protection flanges, Dimensions page
dim's Fig. Flowmeter Primaries 1000 [14" 40"], Flanges
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Flowmeter Primary 1000 [14"-40"], ANSI Flanges Model SE41F
Cable Connector
Number Holes
Tolerances -500 14"-20" -1000 24"-40"
Meter Size
Instrument Dimensions L2)3)
Flange Dimensions ANSI 28.6 28.6 31.7 31.7 34.9 34.9
Weight appr. CL150 1132 appr. (pound) 1131 1459 2496
Inch
13359 (ser.1000)
22.2 1040 25.4 1057 1010 1170 1140 1380 1210 1300 1000 Other pressure ratings upon request. grounding plate mounted flange 1.4571[316Ti]. Other materials upon request. With protection plates mounted both flanges, grounding plate required Series 1000 (for replacement only) also available with protection flanges, Dimensions page
dim's
Projektion nach Methode
Fig.
Flowmeter Primaries 1000[14" 40"], ANSI Flanges
Electromagnetic Flowmeter FSM4000 D184S073U02
Ordering information: Flanged Instruments, Model SE41F
addition Ordering Number please supply following information: Fluid, fluid temperature, operating pressure, flow range, pipeline type (grounding plate, grounding electrodes)1) Ordering Number SE41F Liner Material Hard rubber (DN15 DN1000 [1/2" 40"]) approved Soft rubber (DN50 DN1000 40"]) PTFE (DN10 DN600 [3/8" 24"]) approved (DN3 [1/10" 5/16""]) approved Others Meter Size Inch 1/10 5/32 5/16 (only ANSI Cl150/300 13359 Installation length) 1000 Measuring Grounding Electrode Material 1.4571[316Ti] none Hastelloy none Hastelloy none standard Titanium none Tantalum none 1.45393) none Platinum Iridium none 1.4571[316Ti] with Hastelloy with Hastelloy with Titanium with Tantalum with 1.45393) with Platinum Iridium with Others Pressure Rating ANSI (Installation length Series 1000 only replacement) ANSI (Installation length Series 1000 only replacement) ANSI (ISO 13359 Installation length) ANSI (ISO 13359 Installation length) Others Continued next page grounding plate required (see Part No.) standard grounding plate made 1.4571[316Ti]. Others upon request. From [5"] conductive grounding surface integrated hard/soft rubber liners, standard. Food Industry applications.
Electromagnetic Flowmeter FSM4000 D184S073U02
Ordering Number Flange Material Steel (standard from 20[3/4"]) 1.4571[316Ti] (standard DN15[1/10" 1/2"], option from 20[3/4"]) Others upon request Flange Accessories None Protection plates 1.4571[316Ti] (mounted side) Only PTFE/PFA Grounding plate 1.4571[316Ti] (mounted side) Only PTFE/PFA Protection flanges 1.4571[316Ti] (mounted both sides)4) Only PTFE Temperature Range Standard (see Specifications, Liner Materials) High temperature design (only PTFE/PFA) Certifications None Material certified 10204 Par. 3.1B pressure test 2000 Inspection Certificate 10204 3.1B Pressure test 2000 Others Calibration Certificates Standard Others Protection Class 60529 (connection with cable connector) (connection with cable connector) resin compound (connection with threads) Others Design5) Without preamplifier (Standard [3/8"] 1000 [4"]) Preamplifier (Standard [1/10"] [5/16"]) Preamplifier Only with Installation Length Series 1000 Short ANSI/DIN Flanges. Installation length 80[3] from 100[4"] Notes design Design without preamplifier Preamplifier possible µS/cm Minimum Conductivity [1/10"] [5/16"]
[3/8"] 1000 [4"] µS/cm µS/cm µS/cm
Preamplifier µS/cm Max. cable lenght without preamplifier Max. cable lenght with preamplifier (Empty pipe detection sible)
Additional Ordering Information provided writing:
Name Plate (also available Stainless Steel, option) German English French Electrode Design Standard Conical head (from [3/8"] material 1.4539 used high grease content fluids)
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Stainless Steel Flowmeter Primaries [1/10" 1-1/4"], Flanged
Model SE21F
Cable Connector 13.5
Flange Dimensions Liner Connections 1/10-5/16" 3/8", 1/2" 3/4" 1-1/4" 1-1/2" 10,15 Weight appr. appr. (pound) 7.72 7.72 7.72 8.82 11.02 12.13
ANSI Flange Dimensions Liner Connections 1/10"-5/16" 3/8", 1/2" 3/4" 1-1/4" 1-1/2" 1/10"-5/16" 3/8", 1/2" 3/4" 1-1/4" 1-1/2" 10,15 10,15 34.8 42.9 50.8 63.5 73.0 34.8 42.9 50.8 63.5 73.0 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 22.2 12.6 14.2 15.8 17.4 15.8 17.4 19.0 20.5 22.1 Weight appr. appr. (pound) 7.72 7.72 7.72 8.82 11.02 12.13 7.72 7.72 7.72 8.82 11.02 12.13
88.9 60.3 88.9 60.3 98.4 69.8 79.2 117.5 88.9 98.6 95.2 66.7 95.2 66.7 117.5 82.5 123.8 88.9 133.3 98.4 155.6 114.3
grounding plate required, materials upon request. With grounding plates (protection plates) materials upon request.
dim's Fig. Flowmeter Primaries [1/10" 1/2"]
Number Holes
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Stainless Steel Flowmeter Primaries 4"], Flanged
Model SE21F
Cable Connector 13.5
Number Holes
Projektion nach Methode
Flange Dimensions Liner 10-40 10-16 25-40 10-40 10-16 25-40 appr. Weight appr. (pound) 17.64 22.05 22.05 26.45 39.68 39.68
ANSI Flange Dimensions Liner Meter Size 2-1/2" 2-1/2" appr. Weight appr. (pound) 17.64 22.05 26.45 39.68 17.64 22.05 26.45 39.68
grounding plate required, materials upon request. With grounding plates (protection plates) materials upon request.
dim's Fig. Flowmeter Primaries
Electromagnetic Flowmeter FSM4000 D184S073U02
Ordering Information: Stainless Steel Flowmeter Primaries [1/10" 4"], Flanged
addition Ordering Number please supply following information: Fluid, fluid temperature, operating pressure, flow range, pipeline type (grounding plate)1) Ordering Number SE21F Liner Material: Meter Size Inch 1/10 5/32 5/16 Signal Electrode Grounding Electrode Material 1.4571[316Ti] none Hastelloy none Hastelloy none Titanium none Tantalum none 1.4539 none (Food Ind. applications) Platinum Iridium none 1.4571[316Ti] with Hastelloy with Hastelloy with Titanium with Tantalum with 1.4539 with (Food Ind. applications) Platinum Iridium with Others Pressure Rating Standard [4"] Standard 3-80 [1/10"-3"] ANSI (ISO 13359 Installation length) ANSI (ISO 13359 Installation length) Others Process Connection Materials 1.4571[316Ti] Others Flange Accessories1) None Protection Plates 1.4571 (mounted both sides) Grounding Plate 1.4571 (mounted side) Others Temperature Range Standard design (266 Continued next page Protection plates grounding plates) mounted both sides grounding plate mounted side flange, material 1.4571 [316Ti]. Others upon request.
Electromagnetic Flowmeter FSM4000 D184S073U02
addition Ordering Number please supply following information: Fluid, fluid temperature, operating pressure, flow range, pipeline type (grounding plate))1) Ordering Number SE21F Certifications None Material certified 10204 Par. 3.1B pressure test 2000 Inspection Certificate 10204 3.1B Pressure test 2000 Others Calibration Certificates Standard Others Protection Class (connection with 13.5 cable connector) (connection with 13.5 cable connector) resin compound (connection with Adapter) Design1) Without preamplifier (Standard [3/8"] 1000 [4"]) Preamplifier (Standard [1/10"] [5/16"]) Preamplifier Notes design Design without preamplifier Preamplifier possible µS/cm Minimum Conductivity [1/10"] [5/16"] [3/8"] 1000 [4"] µS/cm µS/cm
Preamplifier µS/cm µS/cm Max. cable lenght without preamplifier Max. cable lenght with preamplifier (Empty pipe detection possible)
Additional Ordering Information provided writing:
Name Plate (also available Stainless Steel, option) German English French Electrode Design Standard Conical head (from [3/8"] material 1.4539 used high grease content fluids)
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Stainless Steel Flowmeter Primaries, [1/10" 4"], Wafer Design
Model SE21W
Cable Connector 13.5
3-DN [1/10"-5/16"]
Meter Size Inch
Weight appr.
13.6
Weight appr. (pound) 3.31 66.5 4.41 4.41 5.51 6.61 8.82 9.92 14.33 18.74
1/10 5/32 10-40 5/16 150/ 10-16 Installation length with grounding plates Mounting bracket optional
dim's Fig. Flowmeter Primaries [1/10" 4"], Wafer Design
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Flowmeter Primary, Variable Process Connections, [1/10" Model SE21_
3-DN [1/10"-1 1/2"]
Cable Connector 13.5
Rohr
50-DN [2"-4"]
Cable Connector 13.5
Number Holes
1/2"-4" 65-100
Meter Size Inch 3-10 1/10-3/8
66.5
Weight appr. kg1)
Weight appr. lb1) (pound) 3.31 3.31 4.41 4.41 5.51 6.61 8.82 9.92 14.33 19.84
installation lengths with process connections, Pages 23-24. additional weight process connections, Pages 23-24. With mounting bracket 10.5 Mounting bracket optional
dim's
Projektion nach Methode
Fig.
Flowmeter Primaries [1/10" 4"], Variable Process Connections
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Stainless Steel Flowmeter Primaries, Adapters Various Process Connections Model SE21_
Meter Size Inch 1/10 22.6 31.3 35.6 48.6 60.3 72.9 97.6 25.0 33.7 38.0 51.0 63.5 76.1 101.6 1.54 2.20 2.20 2.20 3.09 4.41 5.73 2037 Weight1) 10.0 16.0 20.0 26.0 32.0 38.0 50.0 66.0 81.0 100.0 13.0 19.0 23.0 29.0 34.0 41.0 54.0 70.0 85.0 104.0 Weld Stubs 11850 Weight1) 0.88 0.88 1.54 1.54 2.20 2.20 2.20 3.09 4.41 5.73 10.3 18.1 23.7 36.8 13.5 21.3 26.9 Tri-Clamp 32676 1.10 1.10 1.98 1.98 3.09 3.09 3.09 4.85 7.05 9.70 10.0 16.0 20.0 26.0 32.0 38.0 50.0 66.0 81.0 100.0 Weight1) 1.10 1.10 1.54 1.76 3.31 3.09 2.65 3.53 5.29 6.83 Weight1) 2463 Weight1) 0.88 0.88 1.54 1.54 2.20 2.20 2.20 3.09 4.41 6.61
Meter Size Inch Thds. 1/10 1/8" 1/8" 1/6" 1/6" 1/6" 1/6" 1/6" 1/6" 1/4" 1/4" 11851
Food Industry Fittings DIN11864-1 (Form Weight1) 1.10 1.10 1.98 1.98 3.09 3.09 3.09 4.85 7.05 9.70 Thds. 1/8" 1/6" 1/6" 1/6" 1/6" 1/6" 1/6" 1/6" 1/4" 1/4"
Weight pair
Weld Stubs 11850 2037 2463
Clamp 32676
Food Industry Fitting 11851
dim's Fig. Dimensions [1/10" 4"], Adapters Variable Process Connections
Wgt.
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Model DS21
Meter Size
Weld Stubs 11850 Weight1) 0.88 0.88 1.54 1.54 2.20 2.20 2.20 3.08 4.41 5.73
3-10
Inch 1/10-3/8
Food Industry Fittings Weight1) 11851 1.10 1.10 1.98 1.98 3.08 3.08 3.08 4.85 7.05 9.70
11850, 2037 11851
Weld Stubs
Food Industry Fitting
Meter Size Inch 3-10 1/10-3/8 Weight pair 3/8" 1/2" 3/4"
External Threads 2999 Weight 0.88 0.88 1.76 1.76
External Threads
dim's Fig. Dimensions, Model SE21, [1/10" 4"], Adapters Variable Process Connections
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Stainless Steel Flowmeter Primaries, 1/8"-Sanitary Connectors, [1/25" 1/12"] Model SE21B
Cable Connector 13.5
(135)
Note: Connection dimension 1/8" coupling, internal threads Mounting bracket optional
Information:
Grounding electrodes integrated flowmeter primary standard made same material signal electrodes.
Process Connections 1/8" Sanitary connection1) hose
Inch 1/25 1/12
Weight 3.31
dim's Fig. Flowmeter Primaries [1/25" 1/12"]
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Ordering Information: Stainless Steel Flowmeter Primaries
addition Ordering Number please supply following information: Fluid, fluid temperature, operating pressure, flow range, pipeline type (grounding plate, grounding electrode)1) Ordering Number SE21 Process Connections Wafer Design 3-100 [1/10-4"] Weld stubs 11850 3-100 [1/10-4"] Weld stubs 2463 3-100 [1/10-4"] Weld stubs 2037 25-100 [1-4"] Food Industry fitting 11851 3-100 [1/10-4"] Clamp 32676 3-100 [1/10-4"] External threads 228/DIN 2999 [1/0" adapter 1/8" Sanitary connectors [1/25" 3/32"] Others Liner Material [1/10" 4"]) Peek [1/25" 1/12"]) Torlon [1/25" 1/12"]) Meter Size Inch 1/25 1/17 1/12 1/10 5/32 5/16 Measuring Electrode /Grounding Electrode Material2) 1.4571[316Ti] /none Hastelloy /none Hastelloy /none standard Titanium /none Tantalum /none 1.4539 /none (Food Industry applications) Platinum Iridium /none 1.4571[316Ti] /with Hastelloy /with Hastelloy /with Standard Titanium /with Tantalum /with 1.4539 /with (Food Industry applications) Platinum Iridium /with Others Pressure Rating Clamp 65-100); external threads, Food Ind. fitting, weld stubs 100) Wafer Design, Clamp (3-50); Food Ind. fitting, weld stubs Wafer Design 3-50); Food Ind. fitting, weld stubs 3-40) Wafer Design 3-100 [1/10" ANSI Wafer Design 3-100 [1/10" ANSI Wafer Design 3-50 [1/10" Others Continued next page Only required Wafer Design pipelines with insulating liners. [1/25"-1/12"] always order with same material signal electrodes, standard.
Electromagnetic Flowmeter FSM4000 D184S073U02
Ordering Number SE21 Process Connection Materials None (only Wafer Design) 1.4571 [316Ti] (only [1/25"-1/12"]) 1.4404 [316L] standard [1/25"-1/12"]) Others Instrument Mounting Bracket None With Others Temperature Range Standard design [1/25" 1/12"] max. Certifications None Material certified 10204 Par. 3.1B pressure test 2000 Inspection Certificate 10204 3.1B Pressure test 2000 Calibration Certificates Standard Others Protection Class (connection with 13.5 cable connector) (connection with 13.5 cable connector) resin compound (connection with Adapter) Design1) Without preamplifier (Standard [3/8"] 1000 [4"]) Preamplifier (Standard [1/10"] [5/16"]) Preamplifier Notes design Design without preamplifier Preamplifier Preamplifier possible µS/cm µS/cm Minimum Conductivity [1/10"] [5/16"] [3/8"] 1000 [4"] µS/cm µS/cm µS/cm
Max. cable lenght without preamplifier Max. cable lenght with preamplifier (Empty pipe detection possible)
Additional Ordering Information provided writing:
Name Plate (also available Stainless Steel, option) German English French Electrode Design
Standard Conical head (from [3/8"] material 1.4539 used high grease content fluids)
Others Gasket Materials EPDM with Approval (CIP capable, grease) Silicone with Approval (suitable grease) PTFE (Teflon) None
Electromagnetic Flowmeter FSM4000 D184S073U02
Installation Accessories
Chemical Applicationd (Grounding) plastic pipelines pipelines with insulating liners, protection/ grounding plates made conductive PTFE (patent applied for), replace expensive special materials (Platinum, Tantalum etc.) presently used. Succesfully tested numerous applications.
Holes scale
4±0.5
Fig.
Protection Plates/Grounding Plates
Fig.
PTFE Protection/Ground Plates
loose grounding plates installed between flowmeter flange mating flange. Available sizes 3-DN [1/10"-24"]. Mat. 1.4571[316Ti] other materials upon request (inch) T=Thick 3-80 1/10-3 10-40 100-150 25-40 100-250 4-10 10-16 300-600 12-24 10-16
Nennweite 10-100
(inch) 3/8"-4"
10-40 upon request
Thickness
Wafer Design Accessories Model SE21W following accessories available function meter size pressure rating: Bolts, nuts, lockwasher, centering elements Gaskets included accessories.
Material:
Ground connection
Ground connection
Meter Size 1/10" 3/8" 1/2" 3/4" 1/4" 1/2" 1/2"
Grounding Plate, Loose (Centered Mounting Bolts)
Protection Plate/Grounding Plate Mounted Flowmeter
Attach ground cable with screw,
lock washer plate. Inside diameter lining Grounding plate mounted directly instrument [3/8" 24"] Material: Stn. stl. 1.4571 [316Ti] Thickness [4"] [5"] Inside diameter lining
Fig.
Grounding plate
Protection Flanges Protection flanges protect liner from abrasive fluids centered pipeline using groove spring. Protection flanges available thicknesses mounted intrument. Added installation length Series 1000 DIN/ANSI flanges [3"] from [4"] Gaskets Protection Plates/Grounding Plates Only gasket mating flange required PTFE/PFA lined instruments installed with metal grounding plates. gasket should placed either side grounding plate hard/soft rubber lined instruments. Commercially available gaskets made material (rubber, PTFE, etc) compatible with fluid operating temperatures should used.
Pressure Rating
Part Number D614L265U03 D614L265U03 D614L265U04 D614L265U03 D614L266U05 D614L266U06 D614L267U04 D614L267U05 D614L267U06 D614L268U04 D614L268U05 D614L268U06 D614L269U04 D614L269U05 D614L269U06 D614L270U04 D614L270U05 D614L270U06 D614L296U04 D614L296U05 D614L296U06 D614L297U08 D614L297U10 D614L298U08 D614L298U09 D614L299U07 D614L299U09
Electromagnetic Flowmeter FSM4000 D184S073U02
Specifications: Converter
Protection Class 60529 field mount housing NEMA Design Field Mount Housing made cast Alum. 1725, painted. Paint coat thick. Lower section (RAL 7012), upper section (RAL 9002). Dimensions Page Weight appr. (7.28 pound). Electrical Connections Cable entry 1.5, NPT, with adapter (upon request), screw terminals Damping Selectable from 99.0 Zero Return Selectable from range value Signal Cable Max. cable length between flowmeter primary converter standard design versions with automatic zero return, from [3/8"] from µS/cm. designs with preamplifiers. long signal cable included with flowmeter. longer cable required, Footnote Page Ordering Information, Converter. Magnet Coil Supply Cable required connecting flowmeter primary converter. reasons wire cable shielded. long cable included with flowmeter. longer cable required, Footnote Page Ordering Information, Converter. Forward/Reverse Flow Metering flow direction indicated display direction arrows. also possible transmit flow direction information over contact output. Display line, lighted, graphic display. improve readability, flow information displayed lines with larger characters. individual flowrate output values displayed. switching matrix display with max. characters. clear text error diagnosis displayed when system monitor detects error condition. alarm condition also signaled over alarm output. Data Security data stored FRAM (Ferroelectric Nonvolatile Random Access Memory) year period without requiring power during power outage when main supply power turned off. Additional security provided serial FRAM installed converter external connection board which parameter settings process information stored. data external FRAM uploaded into converter. Thereby easy converter exchange possible without reconfiguration simply uploading stored data from external FRAM into converter.
Fig.
Converter FSM4000
Flow Range flow range whose value corresponds flow velocity between selected. Minimum Conductivity µS/cm standard µS/cm with preamplifier µS/cm with preamplifier Reproducibility rate Response Time (0-66 Operation mode ,,Fast" (0-66 Operation mode (Standard) Supply Power Unom 115-230 50/60 Urat 85-253 50/60 50/60 20,4-26,4 20,4-31,2 Ripple Power (flowmeter primary including converter) Ambient Temperature +140 Storage Temperature +176 Relatively humidity Acc. 60068 Vibration Acc. 60068 (10-55 amplitude 0.15 3-1000 [1/10"-40"] 5/16"] 10-1000 [3/8"-40"]
Electromagnetic Flowmeter FSM4000 D184S073U02
Flow Totalization flow totalized engineering units. pulse factor, pulses unit, between 0.001 1000. totalizer values forward reverse flow directions displayed simultaneously. Display selections made submenu "Display". Parameter Settings Entries made using menus displayed number languages (German, English, French, Finnish, Swedish, Italian, Spanish Dutch) using keys dialog with display communication over data link, using HART Protocol Profibus preparation). Magnet Stick used configuration without opening front door. Position Magnet Stick over magnet symbols cover over display. Alarm Signals converter incorporate /min alarm. alarm limits anywhere within range 0-105 flow range value. When flowrate outside alarm limits set, error message displayed upper line. also possible transmit signal over contact output. Upgrade converter with functions also used with older model electromagnetic flowmeters. appropriate model number must selected converter. also possible converter with flowmeters Model 10D1422. special converter version required when updating older model (see Ordering Information, Converter) applicable meter size range 1000 [1/10" 40"] only voltage design. Isolation In-/Output current output, pulse output contact input contact output galvanically isolated from input circuit from each other.
In-/Output Signals
Current Output (terminals following functions available software: load load load 1120 load 1120 Contact Output (terminals 41,42) following functions available software: Forward/reverse flow direction signal Flowrate alarm (max. min.) General alarm Empty pipe output contact configured normally open normally closed. Optocoupler specifications UCEH ICEL Scaled Pulse Output (terminals Maximum count frequency kHz. Pulse factor engineering unit from 0.001 1000/unit selectable software. pulse width from 0.100 2000 design (active, passive) selected using jumpers. Active Voltage pulse rectangular, Load Ohm, Pulse width count frequency Load Ohm, Pulse width max. count frequency: kHz. Passive Optocoupler "closed UCEL ICEL "open": UCEH ICEH
Contact Input (terminals 81/82)
Passive contact (normally open). following functions available software: External Zero Return When pipeline empties output signals turned off. current output dependent current output range selection. External Totalizer Reset Resets internal totalizer value display pulse counter both flow directions. Design Passive (optocoupler) ,,ON": ,,OFF":
Electromagnetic Flowmeter FSM4000 D184S073U02
Converter
4-20
HART
Bell Modem
Flowmeter Primary Hand Terminal
Fig. HART Protocol
HART®-Protocol Version
HART Protocol provides communication between process control system, Hand Terminal field instrument. communication signals, which superimposed voltage current output, affect other instruments connected current output. This option only available with current output. Transmission Type Modulation current output Bell Standard. Baudrate 1200 Baud Format Logic 1200 Logic 2200 Cable Max. 1500 twisted shielded Max. Signal Amplitude mApp Load Current Output min.: max.: digital communication current output does affect other connected instruments. configure using SmartVision D(Device Type Manager) required.
System Connections conjunction with D(Device Type Manager) available instrument (Software Revision from B.10) communication (Configuration, Parameter Settings) activated using appropriate applications 0.98 (SMART VISION 4.01 R2). preparation PROFIBUS preparation FOUNDATION Fieldbus preparation
Electromagnetic Flowmeter FSM4000 D184S073U02
Connection Examples Peripherals
Scaled Pulse Output active
internal external
Scaled Pulse Output passive, optocoupler
internal external +16-30
Current Output active with/without HART-Protocol (4-20)
internal external
0/4-20 0/2-10
Contact output system monitor, max. min. alarm, empty pipe forward/reverse flow direction signal. Function soft ware selectable
Contact input external totalizer reset external zero return Function software selectable
internal
external
internal
external +16-30
Fig.
Connection Examples Peripherals
Electromagnetic Flowmeter FSM4000 D184S073U02
Interconnection Diagram: Flowmeter Primary 1000 [1/25"-40"], Converter Field Mount Housing
Converter Field Mount Housing
Functional Earth
Flowmeter Primary
With preamplifier (always DN1[1/25"] [5/16"])
Supply power High voltage: voltage: Frequency:
Urat Unom Terminals 20.4 20.4 31.2 Terminals Supply power Supply power Shielded Type Part D173D147U01 included with shipment standard Software selectable Active 0/4-20 0/2-10 mA,0 Terminals: Software selectable Passive ,,closed": UCEL ICEL ,,open": UCEH ICEH Terminals: Software selectable Passive ,,On": ,,Off": Terminals: Selectable Active/Passive fmax: kHz, pulse width ms-2000 Setting range:0.001-1000 pulses/units ,,closed": UCEH ICEH ,,open": UCEL ICEL Terminals: Part D173D018U02, included with shipment. Voltage supply flowmeter primary with preamplifier Terminals instead standard instrument.
Magnet coil supply:
Current output: Function:
Contact output: Function:
Contact input: Function:
Pulse output: Function:
Shielded signal cable: Shielded signal cable:
Comment: recommend that output cables shielded with shield connected functional earth. Fig. Interconnection Converter
Functional Earth
Attention!
flowmeter primary includes preampli fier either conductivity applications flowmeter sizes [1/25" 16"], supply voltage must connected terminals both flowmeter primary converter.
Electromagnetic Flowmeter FSM4000 D184S073U02
Interconnection Diagram: Upgrade Flowmeter Primary 1000 [1/10"-40"], Converter Field Mount Housing, Model 10D1422 (10DI1425, 10DS3111A-C 500-1000 [20"-40"])
Terminal board: D685A1020U03 Switch S903 must closed
Converter Field Mount Housing
Functional Earth
Attention!
Supply power name plate primary
Functional Earth
Flowmeter Primary
Supply Power High voltage: Frequency:
Magnet coil supply: Current output: Function: Contact output: Function:
Contact input: Function:
Pulse output: Function:
Shielded signal cable: Reference cable:
Urat Unom Terminals Supply power Supply power Magnet coil supply from Supply power Software selectable Active 0/4-20 0/2-10 Terminals: Software selectable Passive ,,closed": UCEL ICEL ,,open": UCEH ICEH Terminals: Software selectable Passive ,,On": ,,Off": Terminals: Selectable Active/Passive fmax: kHz, pulse width ms-2000 Setting range: 0.001-1000 pulses/units ,,closed": UCEH ICEH ,,open": UCEL ICEL Terminals: Part D173D018U02 using this signal cable available installation Only connecting reference cable terminals: Terminals: Model 10D1422
Comment: recommend that output cables shielded with shield connected functional earth.
Fig.
Interconnection Upgrade Converter
Electromagnetic Flowmeter FSM4000 D184S073U02
Ordering Information: Converter
addition Ordering Number please supply following information: Flow range, applicable current output, pulse output active/passive, pulse factor pulse width. These selections factory preset. Ordering Number External Converter Housing Field mount housing (with cable connector M20x1.5), standard Field mount housing (with adapter cable connector 1/2") Supply Power High voltage 85-253 voltage 20.4-26.4 20.4-31.2 Display Magnet Stick operation graphic display, lighted
In-/Output Options Current output Pulse output active Contact input Contact output Current output Pulse output active Contact input Contact output HART Current output Pulse output passive Contact input Contact output Current output Pulse output passive Contact input Contact output HART Contact output PROFIBUS Contact output FOUNDATION Fieldbus Contact output PROFIBUS with plug Application Standard Flowmeter Primary Flowmeter Primary Type SE2_, SE4_, standard Flowmeter Primary Type DS2_, DS4_, 10DS3111, 10DI1425 Flowmeter Primary Type 10D1422, 10DI1425 500)2) Others Approvals None Name Plate German English French Stainless Steel German Stainless Steel English Stainless Steel French Design Level Software Level
preparation preparation preparation
Option available Supply power ,,Low voltage" Shielded signal cable, included with each flowmeter. longer cables order Part D173D018U02. Shielded coil supply cable, included with each flowmeter. longer cables order Part D173D147U01. connection board reference cable includes voltage splitter, magnet coil supply flowmeter primary from separate external power supply. FRAM Variant required.
Electromagnetic Flowmeter FSM4000 D184S073U02
Dimensions: Field Mount Housing
139.7
14.5
83.5
Field Mount Housing with Window
Cable Connector
Mounting Dimensions Mounting holes pipe mounting Mounting upon request
Opening Housing Cover
Loosen cover screws. Remove cover flip open cover with window.
Closing Housing Cover
Press cover with window closure side against gasket surface install tighten cover screws. small cover frame install tighten cover screws.
Min.175
min.
dim's Fig. Dimensions, Converter Housing Installation proposal
Projektion nach Methode
Electromagnetic Flowmeter FSM4000 D184S073U02
Ordering Number: Test simulator
Flowmeter Primary Simulator Setting Flow Signal None (adapter only) position Digiswitch with 1000 steps Supply power None (Adapter orders only) V-240 (50/60 with Schuko plug V/48 (AC/DC) with plug V-240 (50/60 with plug Others Accessories None Adapter converter 50XM2000/50XE4000/E4/50XF4000 Adapter simulator 55XC2000 Adapter plate converter Others Design Level (Specified ABB) Name Plate German English French Supply power must correspond value listed converter Name Plate. adapter listed above Converters 50XM2000/50XE4000/E4 also used existing simulators 55XC2000. adapters required, then Ordering Number each adapter type used. 55XC4
Software
Meter parameter documentation software upon request. SMART VISION Communication tool HART charge evaluation version. DTM`s included SMART VISION Tool.
Electromagnetic Flowmeter FSM4000 D184S073U02
Electromagnetic Flowmeter FSM4000 D184S073U02
IndustrialIT wordmark mentioned product names form XXXXXXIT registered pending trademarks ABB. Sales Customer Support expertise over countries worldwide. www.abb.com
Company's policy continuous product improvement right reserved modify information contained herein without notice. Printed Fed. Rep. Germany (10.03) 2003
Ltd. Oldends Lane, Stonehouse Gloucestershire, Phone: +44(0)1453 826661 Fax: +44(0)1453 827856
Inc. County Line Road Warminster, 18974 Phone: 6000 Fax: 7183
Automation Products GmbH Dransfelder Str. 37079 GERMANY Phone: Fax: Mail Customer Care Center: CCC-support.deapr@de.abb.com
D184S073U02 Rev.

FieldIT Electromagnetic Flowmeter FSM4000 Level Information

Top Searches for this datasheet

Other recent searches