FieldIT 2600T Series Pressure Transmitters Model 265DS Differenti
|
|
|
Top Searches for this datasheet
SS/265DS_3
FieldIT 2600T Series Pressure Transmitters
Model 265DS Differential selectable maximum working pressure 41MPa, 5945psi
Base accuracy ±0.04% Span limits 0.05 10000kPa; 0.2inH2O 1450psi True draft range ultra performance transmitter Reliable sensing system coupled with very latest digital technologies provides large turn down ratio 100:1 Comprehensive sensor choice optimize in-use total performance stability 5-year stability Flexible configuration facilities provided locally local keys combined with indicator hand held terminal configuration platform Multiple protocol availability provides integration with HART®, PROFIBUS FOUNDATION Fieldbus platforms offering interchangeability transmitter upgrade capabilities Full compliance with Category
2600T Series Engineered solutions applications
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Functional Specifications
Range span limits Sensor Code Upper Range Limit (URL) 1kPa 10mbar 4inH2O 6kPa 60mbar 24inH2O 40kPa 400mbar 160inH2O 250kPa 2500mbar 1000inH2O 2000kPa 20bar 290psi 10000kPa 100bar 1450psi Lower Range Limit (LRL) -1kPa -10mbar -4inH2O -6kPa -60mbar -24inH2O -40kPa -400mbar -160inH2O -250kPa -2500mbar -1000inH2O -2000kPa -20bar -290psi -10000kPa -100bar -1450psi Minimum Span 0.05kPa 0.5mbar 0.2inH2O 0.2kPa 2mbar 0.8inH2O 0.4kPa 4mbar 1.6inH2O 2.5kPa 25mbar 10inH2O 20kPa 0.2bar 2.9psi 100kPa 1bar 14.5psi
Operative limits
Temperature limits (°F)
Ambient operating temperature) Silicone filling: -40°C +85°C (-40°F +185°F) Inert filling: -20°C +85°C (-4°F +185°F) Lower ambient limit Viton PTFE gaskets: -20°C (-4°F) Note Hazardous Atmosphere applications temperature range specified certificate/approval relevant aimed type protection. Process Lower limit refer lower ambient limits Upper limit Silicone oil: 121°C (250°F) working pressure above 10kPa abs, 100mbar abs, 1.45psia(1) Inert fluid: 121°C (250°F) working pressure above atmospheric pressure Storage Lower limit: -50°C (-58°F); -40°C (-40°F) indicators Upper limit: +85°C (+185°F) 85°C (185°F) application below 10kPa abs, 100mbar abs, 1.45psia down abs, 35mbar abs, 0.5psia 85°C (185°F) application below atmospheric pressure down 40kPa abs, 400mbar abs, 5.8psia
Span limits
Maximum span (can further adjusted 0.5) differential models, within range limits) RECOMMENDED SELECT TRANSMITTER SENSOR CODE PROVIDING TURNDOWN VALUE LOWEST POSSIBLE OPTIMIZE PERFORMANCE CHARACTERISTICS. Zero suppression elevation Zero span adjusted value within range limits detailed table long calibrated span minimum span Damping Adjustable time constant 60s. This addition sensor response time Second sensor absolute pressure measurement Range 41MPa, 410bar, 5945psi (0.6MPa), 6bar, 87psi sensor code Turn time Operation within specification less than 2.5s with minimum damping. Insulation resistance 100M 1000VDC (terminals earth)
Pressure limits
Overpressure limits (without damage transmitter) Lower limit 0.5kPa abs, 5mbar abs, 0.07psia silicone 40kPa abs, 400mbar abs, 5.8psia inert fluid Upper limit 0.6MPa, 6bar, 87psi sensor code 16MPa, 160bar, 2320psi 25MPa, 250bar, 3625psi 41MPa, 410bar, 5945psi according selected code variant. Static pressure Transmitters differential pressure model 265DS operates within specifications between following limits Lower limit 3.5kPa abs, 35mbar abs, 0.5psia silicone 40kPa abs, 400mbar abs, 5.8psia inert fluid Upper limit 0.6MPa, 6bar, 87psi sensor code 16MPa, 160bar, 2320psi 25MPa, 250bar, 3625psi 41MPa, 410bar, 5945psi according selected code variant. Proof pressure transmitter exposed without leaking line pressure times nominal pressure simultaneously both sides.
2600T Pressure Transmitters Model 265DS
SS/265DS_3 effective internal inductance effective internal capacitance Maximum permissible ambient temperatures depending temperature class: -40°C +85°C (-40°F +185°F) -40°C +40°C (-40°F +104°F) Transmitters type protection "flameproof enclosure according directions (ATEX) Transmitter with 20mA output signal HART communication Fieldbus transmitters (PROFIBUS FOUNDATION Fieldbus) Marking (DIN 014): Ambient temperature range: -40°C +75°C (-40°F +167°F) Transmitters category application "Zone Transmitter with 20mA output signal HART communication according directions (ATEX) Marking (DIN 014): T50°C resp. T95°C Operating conditions: Supply signal circuit (terminals signal +/-): 22.5mA Ambient temperature range: Temperature class Ta=-40°C +85°C (-40°F +185°F) Temperature class Ta=-40°C +40°C (-40°F +104°F) Factory Mutual (FM) Transmitter with 20mA output signal HART communication Intrinsically safe: Class Division Groups Class Zone Group IIC; Degree protection NEMA Type (indoor outdoor) Permissible ambient temperature depending temperature class
Umax 30V, 10.5nF, 10µH Ambient Temperature +85° +70° +40° +40° (-40 +185° (-40 +129° (-40 +104° (-40 +104° Temperature Imax class 200mA 200mA 25mA 25mA 0.8W 0.75W 0.5W
Environmental limits
Electromagnetic compatibility (EMC) Definition Radio suppression (according 550011) Class Limit class
Fulfills NAMUR recommendation voltage directive Comply with 73/23/EEC Pressure equipment directive (PED) Instruments with maximum working pressure 25MPa, 250bar, 3625psi 41MPa, 410bar, 5945psi comply with 97/23/EEC Category module Humidity Relative humidity: Condensing, icing: Vibration resistance Accelerations frequency 1000Hz (according 60068-2-26) Shock resistance (according 60068-2-27) Acceleration: Duration: 11ms 100% annual average admissible
dust-laden atmospheres transmitter dust sand tight protected against immersion effects defined EN60529 (1989) request) NEMA C0920. Hazardous atmospheres Transmitters type protection "Intrinsically safe according directions (ATEX) Transmitter with 20mA output signal HART communication Marking (DIN 014): T50°C resp. T95°C Supply signal circuit type protection Intrinsic Safety IIB/IIC resp. IIB/IIC connection supply units with maximum values: T50°C resp. resp. T95°C resp. Temperature class resp. T95°C: 200mA 0.8W with (-40 +85)°C (-40 +185)°F 1.0W with (-40 +70)°C (-40 +158)°F Temperature class resp. T50°C: 0.7W with (-40 +40)°C (-40 +104)°F effective internal capacitance, 10nF effective internal inductance, negligible. Fieldbus transmitters (PROFIBUS FOUNDATION Fieldbus) Marking (DIN 014): T50°C resp. T95°C Supply signal circuit type protection Intrinsic Safety IIB/IIC resp. IIB/IIC connection FISCO supply units with rectangular trapezoidal characteristics with maximum values: respectively T4/T6 17.5V 360mA 2.52W respectively T4/T6 17.5V 380mA 5.32W resp. connection supply unit barrier with linear characteristics with maximum values: respectively T4/T6 250mA 1.2W
Fieldbus transmitters (PROFIBUS PA/FOUNDATION Fieldbus) Intrinsically Safe Class III; Division Groups Class Zone Group Non-incendive Class III, Division Groups Transmitter with 20mA output signal HART communication Fieldbus transmitters (PROFIBUS PA/FOUNDATION Fieldbus) Explosion-Proof: Class Division Groups Class II/III, Division Groups Degree protection NEMA Type (indoor outdoor) Canadian Standard (CSA) Transmitter with 20mA output signal HART communication Fieldbus transmitters (PROFIBUS PA/FOUNDATION Fieldbus) Explosion-Proof: Class Division Groups Class Division Groups Class Degree protection NEMA Type (indoor outdoor) Overfill protection non-inflammable inflammable toxic liquids 265DS part overfill protection vessels water polluting flammable liquids. Flammable liquids: only when combined with intrinsic safety code Total pressure MPa, bar, Process temperature limits: +85°C (-40 +185°F) Approval: Z-65.11-271
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Electrical Characteristics Options
HART digital communication 20mA output
Power Supply transmitter operates from 10.5 45VDC with load protected against reverse polarity connection (additional load allows operations over 45VDC). Minimum power supply 14VDC with backlit indicator. other intrinsically safe approval power supply must exceed 30VDC. Ripple Maximum permissible voltage ripple power supply during communication: 7Vpp 100Hz 1Vpp 200Hz 0.2Vpp 300Hz Load limitations 20mA HART total loop resistance R(k) Supply voltage min. operating voltage (VDC) 22.5 minimum required HART communication.
Optional indicators
Integral display 2-line, 6-character 19-segment alphanumeric display with additional chart display, optionally with back illumination. User-specific display: percentage output current output current free process variable Diagnostic message, alarms, measuring range infringements changes configuration also displayed. Optional surge protection voltage 1.2µs rise time 50µs delay time half value current rise time 20µs delay time half value Output signal Two-wire 20mA, user-selectable linear square root output, power 5/2, freely programmable with reference points output. HART® communication provides digital process variable engineering units) superimposed 20mA signal, with protocol based Bell standard. Output current limits NAMUR standard) Overload condition Lower limit: Upper limit: Alarm current Min. alarm current: configurable from 3.5mA 4mA, standard setting: 3.6mA Max. alarm current: configurable from 20mA 22.5mA, standard setting: 21mA Standard setting: max. alarm current 3.8mA (configurable down 3.5mA) 20.5mA (configurable 22.5mA)
2600T Pressure Transmitters Model 265DS
SS/265DS_3
PROFIBUS output
Device type Pressure transmitter compliant Profile Class ident. number 04C2 HEX. Power supply transmitter operates from 10.2 32VDC with polarity. approval power supply must exceed 17.5VDC. Intrinsic safety installation according FISCO model. Current consumption operating (quiescent): 11.7mA fault current limiting: Output signal Physical layer compliance 1158-2/EN 61158-2 with transmission Manchester modulation, 31.25kbit/sec. Output interface PROFIBUS communication according Profibus DP50170 Part 19245 part 1-3. Output update time 40ms Function blocks Analog Input, Transducer, Physical Integral display 2-line, 6-character 19-segment alphanumeric display with additional chart display, optionally with back illumination. User-specific display: percentage output (analog input function block) Diagnostic message, alarms, measuring range infringements changes configuration also displayed. Transmitter failure mode Permanent self-diagnostic; possible errors indicated diagnostic parameters status process values. 17.3mA max.
FOUNDATION Fieldbus output
Power supply transmitter operates from 10.2 32VDC polarity independent. approval power supply must exceed 24VDC (entity certification) 17.5VDC (FISCO certification), according FF-816. Current consumption operating (quiescent): fault current limiting: Output signal Physical layer compliance 1158-2/EN 61158-2 with transmission Manchester modulation, 31.25kbit/sec. Function blocks/execution period standard Analog Input blocks/25ms (each) Additional blocks custom Pressure with calibration Transducer block enhanced Resource block Number link objects Number VCRs Output interface FOUNDATION fieldbus digital communication protocol standard compliant specification 1.5; registration progress. Integral display 2-line, 6-character 19-segment alphanumeric display with additional chart display, optionally with back illumination. User-specific display: percentage output (analog input) Diagnostic message, alarms, measuring range infringements changes configuration also displayed. Transmitter failure mode Permanent self-diagnostic; possible errors indicated diagnostic parameters status process values. 11.7mA 17.3mA max.
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Performance specifications
Stated reference condition 60770 ambient temperature 20°C (68°F), relative humidity 65%, atmospheric pressure 1013hPa (1013mbar), mounting position with vertical diaphragm zero based range transmitter with isolating diaphragms Hastelloy silicone fill HART digital trim values equal 4-20mA span points, linear mode. Unless otherwise specified, errors quoted span. Some performance data (based URL) affected actual turndown (TD) ratio between Upper Range Limit (URL) calibrated span. RECOMMENDED SELECT TRANSMITTER SENSOR CODE PROVIDING TURNDOWN VALUE LOWEST POSSIBLE OPTIMIZE PERFORMANCE CHARACTERISTICS. Dynamic performance (according 61298-1 definition) Standard configuration instruments with turndown 30:1 linear output characteristics. Dead time: sensors sensor sensor 30ms 150ms 400ms 1000ms Time constant (63.2% total step change):
Operating influences
Ambient temperature (for turndown 15:1) (36°F) change between limits -20°C +65°C +150°F) differential pressure sensor ±(0.03% 0.05% span) 120K (216°F) change between limits -40°C +80°C (-40°F +176°F) Thermal change absolute pressure sensor. zero sensors 40kPa, 400mbar, 160inH2O (absolute sensor 41MPa, 410bar, 5945psi) sensor span sensors 0.3kPa, 3bar, 43.5psi (absolute sensor 41MPa, 410bar, 5945psi) sensor 4.5kPa, 45mbar, 18inH2O (absolute sensor 0.6MPa, 6bar, 87psi) 0.6kPa, 6mbar, 2.4inH2O (absolute sensor 0.6MPa, 6bar, 87psi)
Accuracy rating
calibrated span, including combined effects terminal based linearity, hysteresis repeatability. fieldbus versions SPAN refer Analog Input Function Block outscale range differential pressure sensor ±0.04% from 10:1 ±(0.04 0.005 Span -0.05)% greater than 10:1
Static pressure (zero errors calibrated line pressure)
Measuring range Sensor 2bar: 0.05% 2bar: 0.05% URL/bar 2bar: 0.05% span 2bar: 0.05% span/bar Sensors 100bar: 0.05% 100bar: 0.05%URL/100bar 100bar: 0.05% span 100bar: 0.05%span/100bar Sensor 100bar: 0.1% 100bar: 0.1% URL/100bar 100bar: 0.1% span 100bar: 0.1% span/100bar
zero
span
absolute pressure sensor 80kPa, 800mbar, 321inH2O 1.2kPa, 12mbar, 4.8inH2O (for sensor code using 0.6kPa, 6bar, 87psi absolute sensor).
Supply voltage Within voltage/load specified limits total effect less than 0.001% volt. Load Within load/voltage specified limits total effect negligible. Radio frequency interference Total effect less than 0.05% span from 1000MHz field strengths 10V/m when tested with unshielded conduit, with without meter. Common mode interference effect from 250Vrms 50Hz, 50VDC Mounting position Rotations plane diaphragm have negligible effect. tilt from vertical causes zero shift 0.35kPa (3.5 mbar, 1.4inH2O) which corrected with zero adjustment. span effect. Stability ±0.10% over thirty-six-month period Vibration effect ±0.10% (according 61298-3)
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Physical Specification
(Refer ordering information sheets variant availability related specific model versions code)
Optional extras
Mounting brackets vertical horizontal 60mm. (2in) pipes wall mounting. Integral display plug-in rotatable indicator. Supplemental customer AISI fastened transmitter with stainless steel wire customer's data maximum characters spaces. Surge protection available with ATEX-EEx PROFIBUS FOUNDATION Fieldbus with Intrinsic Safety FM-Intrinsically Safe. Cleaning procedure oxygen service Hydrogen preparation Test Certificates (test, design, calibration, material traceability) manual language
Materials
Process isolating diaphragms AISI Hastelloy C276TM; Monel 400TM; Tantalum. Process flanges, adapters, plugs drain/vent valves AISI Hastelloy C276TM; Monel 400TM, Kynar (PVDF) Sensor fill fluid Silicone oil; inert fill (Carbon Fluoride). Mounting bracket AISI Gaskets VitonTM; Perbunan (NBR); EPDM; PTFE (for sensors coated Viton(for sensor Sensor housing AISI Bolts nuts Stainless steel bolts nuts Class A4-70 3506, compliance with NACE MR0175 Class Electronic housing covers Barrel version Low-copper content aluminium alloy with baked epoxy finish; AISI version Low-copper content aluminium alloy with baked epoxy finish. Covers O-ring VitonTM. Local zero span adjustments Glass filled polycarbonate plastic (removable). Tagging AISI 316ss plastic data plate attached electronics housing.
Process connections
flanges: 1/4in process axis selectable with 7/16in-20 fixing threads 19213 connection with fixing threads working pressure 16MPa, 160bar 2320psi fixing threads greater working pressure 41MPa, 410bar, 6000psi adapters: 1/2in process axis centre distance: 54mm (2.13in flange; 51,54 57mm (2.01, 2.13 2.24in) adapters fittings.
Electrical connections
M20x1.5 threaded conduit entries, direct housing. Communication connector: HART: straight angle Harting connector plug. PROFIBUS FOUNDATION Fieldbus M12x1 (without mating female plug) Terminal block HART version: four terminals signal/external meter wiring 2.5mm2 (14AWG) four connection points test communication purposes. Fieldbus versions: terminals signal (bus connection) wiring 2.5mm2 (14AWG). Grounding Internal external 4mm2 (12AWG) ground termination points provided.
Calibration
Standard: maximum span, zero based range, ambient temperature pressure; Optional: specified range ambient conditions.
Mounting position
Transmitter mounted position. Electronics housing rotated 360°. positive stop prevents over travel.
Mass (without options)
3.5kg approx (8lb); 1.5kg (3.4lb) AISI housing. 650g (1.5lb) packing.
Packing
Carton 27cm approx 11in).
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Configuration
Transmitter with HART communication
Standard configuration Transmitters factory calibrated customer's specified range. Calibrated range number stamped type plate. calibration range data specified, transmitter will supplied configured follows: Zero Upper Range Limit (URL) Output Linear Damping 0.125s Transmitter failure mode 21mA above configurable parameters, including Lower range-value Upper range-value which must same unit measure, easily changed using HART hand-held communicator running configuration software SMART VISION with Dfor 2600T. transmitter database customized with specified flange type material, o-ring filling liquid.
Transmitter with FOUNDATION Fieldbus communication
Transmitters factory calibrated customer's specified range. Calibrated range number stamped type plate. calibration range data specified, transmitter will supplied configured follows: Measure Profile Pressure Engineering Unit mbar/bar Output scale Lower Range Limit (LRL) Output scale 100% Upper Range Limit (URL) Output Linear Hi-Hi Limit Upper Range Limit (URL) Limit Upper Range Limit (URL) Limit Lower Range Limit (LRL) Low-Low Limit Lower Range Limit (LRL) Limits hysteresis 0.5% output scale filter 0.125s Address necessary above configurable parameters, including lower range value upper range value which must same unit measure, changed FOUNDATION Fieldbus compatible configurator. transmitter database customized with specified flange type material, o-ring filling liquid.
Transmitter with PROFIBUS communication
Transmitters factory calibrated customer's specified range. Calibrated range number stamped type plate. calibration range data specified, transmitter will supplied configured follows: Measure Profile Pressure Engineering Unit mbar/bar Output scale Lower Range Limit (LRL) Output scale 100% Upper Range Limit (URL) Output Linear Hi-Hi Limit Upper Range Limit (URL) Limit Upper Range Limit (URL) Limit Lower Range Limit (LRL) Low-Low Limit Lower Range Limit (LRL) Limits hysteresis 0.5% output scale filter 0.125s. Address above configurable parameters, including Lower range-value Upper range-value which must same unit measure, easily changed running configuration software SMART VISION with Dfor 2600T. transmitter database customized with specified flange type material, o-ring filling liquid.
Hastelloy Cabot Corporation trademark Monel International Nickel trademark Viton Dupont Nemour trademark
Wetted parts transmitter.
2600T Pressure Transmitters Model 265DS
SS/265DS_3
MOUNTING DIMENSIONS (not construction unless certified) dimensions (in)
Transmitter with barrel housing
(4.49) (0.35) (2.28)
(0.91) with indicator (0.79) Clearance cover removal
(2.76)
Space must available rotate key-board cover
Terminal side Additional plate Housing rotation stop screw Transducer plate
(1.02)
41.3 (1.63)
Process connection
(7.32)
(4.25)
Drain/vent valve (side position)
Threads fixing screws (see process connection data)
(2.13) (3.78) (2.80)
(1.18)
(3.54)
Electrical connection (with gland)
Housing cover
Captive screw keys unit cover
Plate with keys legend
(3.27)
(4.61)
Identification plate
(2.40)
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Transmitter with housing
Transducer plate
(3.78) (2.13)
(2.76)
(3.27) (4.617
Process connection 41.3 (1.63) Terminal side Electrical connection (with plug)
(1.06) (1.89) (0.79) (5.47)
Threads fixing screws (see process connection data) Identification plate
Space must available rotate key-board cover Additional plate
(1.69)
Electrical connection (with gland) Housing cover
Housing rotation stop screw
(2.40)
Captive screw keys unit cover Plate with keys legend
(3.54)
(0.79) (4.21) (5.43) (6.61) (0.91)
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Possible mounting with bracket
(0.43)
(0.4)
60(2.36)
135.5 (5.33) (2.83)
(2.83)
57(2.24)
56(2.20)
(4.33) (8.43)
Vertical pipe mounting
Horizontal pipe mounting
Vertical pipe mounting transmitter above mounting bracket
(5.35)
(2.83)
Horizontal pipe mounting transmitter above mounting bracket
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Electrical connections
Standard Terminal block fieldbus connector versions
Earthing/potential Output signal/ Test sockets 4.20mA equalizing terminal power supply (not function with fieldbus transmitters)
7/8" connector
Cable entry
Screw terminals 0.5.2.5mm2 wires
connector
(male) IDENTIFICATION FOUNDATION PROFIBUS Fieldbus FFPA+ GROUND SHIELD GROUND SHIELD Mating female plug SUPPLIED
Harting connector
Harting identification (view onto socket)
2600T Pressure Transmitters Model 265DS
SS/265DS_3
BASIC ORDERING INFORMATION model 265DS Differential Pressure Transmitter
Select character characters from each category specify complete catalog number. Refer additional ordering information code specify more codes each transmitter additional options required.
BASE MODEL characters Differential Pressure Transmitter BASE ACCURACY 0.04% SENSOR Span limits character 0.05 1kPa 10mbar 60mbar 40kPa 400mbar 250kPa 2500mbar 2000kPa 20bar 10000kPa 100bar Static pressure value character 0.6MPa 1MPa 16MPa 25MPa 41MPa AISI Hastelloy C276Monel 400Monel 400gold plated Tantalum AISI Hastelloy C276Monel 400Monel 400gold plated Tantalum AISI (Horizontal connection) AISI (Horizontal connection) AISI (Horizontal connection) Hastelloy C276(Horizontal connection) Hastelloy C276(Horizontal connection) Hastelloy C276(Horizontal connection) Monel 400(Horizontal connection) Monel 400(Horizontal connection) Monel 400(Horizontal connection) Kynar (PVDF) (Horizontal connection) MWP=1MPa,10bar Bolts/Gasket (wetted parts) 10th character Stainless steel (NACE) Stainless steel (NACE) Stainless steel (NACE) Stainless steel Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) AISI (Barrel version) AISI (Barrel version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Output/Additional options 12th character HART digital communication 20mA HART digital communication 20mA PROFIBUS PROFIBUS FOUNDATION Fieldbus FOUNDATION Fieldbus additional options Options requested ordered "Additional ordering code") additional options Options requested ordered "Additional ordering code") additional options Options requested ordered "Additional ordering code") (Notes (Note (Notes (Note (Notes (Note VitonPTFE (MWP MPa) EPDM Perbunan
4inH2O 24inH2O 160inH2O 1000inH2O 290psi 14.5 1450psi 87psi 145psi 2320psi 3625psi 5945psi Silicone Silicone Silicone Silicone Silicone Inert fluid Inert fluid Inert fluid Inert fluid Inert fluid
(Note (Note (Note (Note (Note NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE
6bar 10bar 160bar 250bar 410bar
Diaphragm material Fill fluid (wetted parts) character
(Note (Note (Note (Note (Note
Process flanges/adapters material connection (wetted parts) character /4in NPT-f direct (7/16in U.S. drilling) /4in NPT-f direct (DIN 19213) /2in NPT-f through adapter (7/16in U.S. drilling) /4in NPT-f direct (7/16in U.S. drilling) /4in NPT-f direct (DIN 19213) /2in NPT-f through adapter (7/16in U.S. drilling) /4in NPT-f direct (7/16in U.S. drilling) /4in NPT-f direct (DIN 19213) /2in NPT-f through adapter (7/16in U.S. drilling) /4in NPT-f direct (7/16in U.S. drilling) (Note
NACE NACE NACE
Housing material electrical connection 11th character /2in Harting connector Fieldbus connector /2in (CM20) Harting connector Fieldbus connector (Not available CSA) (Note (Not available ATEX EExd, CSA) (Note (Not available ATEX EExd, CSA) (Not available CSA) (Not available CSA) (Note (Not available ATEX EExd, CSA) (Note (Not available ATEX EExd, CSA)
2600T Pressure Transmitters Model 265DS
SS/265DS_3
ADDITIONAL ORDERING INFORMATION model 265DS
more 2-digit code(s) after basic ordering information select required options
Drain/vent valve (material position) (wetted parts) AISI process axis (Note AISI flange side (Note AISI flange side bottom (Note Hastelloy C276on process axis (Note Hastelloy C276on flange side (Note Hastelloy C276on flange side bottom (Note Monel 400on process axis Note Monel 400on flange side Note Monel 400on flange side bottom Note Electrical certification ATEX Group Category Intrinsic Safety ATEX Group Category Flameproof ATEX Group Category Type protection energy limited Factory Mutual (FM) Intrinsically Safe Factory Mutual (FM) Explosion Proof (only with 1/2in electrical connection stainless steel Canadian Standard Association Intrinsically Safe (pending) Canadian Standard Association Explosion Proof Integral Digital integral display Backlit digital integral display Mounting bracket (shape material) pipe mounting AISI wall mounting AISI Surge Surge/Transient Protector (Note Operating manual German Labels language German stainless steel (not available with Electronic Housing code German English plastic (not suitable Factory Mutual Explosion Proof) Additional plate stainless steel Preparation procedure Oxygen service cleaning (only available with inert fill Viton gasket Pmax=12MPa/120bar/1740psi; Tmax=60° C/140° Hydrogen service preparation Certificates Inspection certificate 10204-3.1.B calibration Inspection certificate 10204-3.1.B cleanliness stage according 25410 Inspection certificate 10204-3.1.B helium leakage test sensor module Inspection certificate 10204-3.1.B pressure test Certificate compliance with order 10204-2.1 instrument design Germanischer Lloyd approval Overfill protection Material traceability Certificate compliance with order 10204-2.1 process wetted parts Inspection certificate 10204-3.1.B process wetted parts (small parts with certificate compliance 10204) Test report 10204-2.2 pressure bearing process wetted parts Connector Fieldbus (without mating female plug) Fieldbus M12x1 (without mating female plug) Harting straight entry Harting angle entry (Notes (Notes (Notes (Notes NACE NACE NACE NACE NACE NACE NACE NACE NACE
label)
(Note
2600T Pressure Transmitters Model 265DS
Note Note Note Note Note Note Note Note Note available with sensor code available with sensor code MUST USED KYNAR FLANGE ONLY CODE Suitable oxygen service Select type additional ordering code available with Electronic Housing code available with Electronic Housing code available with Process flanges/adapters code available with Process flanges/adapters code
SS/265DS_3
Note available with Process flanges/adapters code Note available with ATEX-EEx (code PROFIBUS FOUNDATION Fieldbus (code with Intrinsic Safety (code FM-Intrinsically Safe (code EA). Note available with sensor code Note available with Electronic housing code Note available with Electronic housing code
Hastelloy Cabot Corporation trademark Monel International Nickel trademark Viton Dupont Nemour trademark
Standard delivery items (can differently specified additional ordering code)
Adapters supplied loose Plug axis drain/vent valves) General purpose design) meter/display, mounting bracket, surge protection English manual labels (stainless steel nameplate Barrel housing code plastic nameplate housing code Configuration with deg. units test, inspection material traceability certificates
SELECTION SUITABLE WETTED PARTS FILLING FLUID COMPATIBILITY WITH PROCESS MEDIA CUSTOMER'S RESPONSIBILITY, OTHERWISE NOTIFIED BEFORE MANUFACTURING.
2600T Pressure Transmitters Model 265DS
SS/265DS_3
Sales Customer Support expertise over countries worldwide www.abb.com/instrumentation
Company's policy continuous product improvement right reserved modify information contained herein without notice. Printed Italy (01.04) 2004
Howard Road, Neots Cambridgeshire, PE19 Tel: +44(0)1480 475321 Fax: +44(0)1480 217948
Inc. County Line Road Warminster, 18974 Tel: 6000 Fax: 7183
Automation Products GmbH Schillerstrasse D-32425 Minden Germany Tel: Fax:
SS/265DS_3
Other recent searches
SPI100N03S2L-03 - SPI100N03S2L-03 SPI100N03S2L-03 Datasheet
SPP100N03S2L-03 - SPP100N03S2L-03 SPP100N03S2L-03 Datasheet
SPB100N03S2L-03 - SPB100N03S2L-03 SPB100N03S2L-03 Datasheet
SiS540 - SiS540 SiS540 Datasheet
SiS630 - SiS630 SiS630 Datasheet
SF11L - SF11L SF11L Datasheet
SF16L - SF16L SF16L Datasheet
JM-DTY5031-15 - JM-DTY5031-15 JM-DTY5031-15 Datasheet
HM62V8512B - HM62V8512B HM62V8512B Datasheet
AP2311GN - AP2311GN AP2311GN Datasheet
AOU438 - AOU438 AOU438 Datasheet
AOU438L - AOU438L AOU438L Datasheet
ACS30MS - ACS30MS ACS30MS Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
