POSITRONIC INDUSTRIES Founded 1966, Positronic Industries vertica
|
|
|
Top Searches for this datasheet
Catalog C-004 Rev.
POSITRONIC INDUSTRIES
Founded 1966, Positronic Industries vertically integrated manufacturer high quality interconnect products. Positronic earned worldwide reputation service oriented, quick-reaction, quality connector supplier. committed maintaining this reputation continuous implementation Complete Capability concept.
Complete Capability
Design Development Designs connectors modifies existing connectors meet industry requirements Continuously conducts marketing studies identify industry needs products Ongoing interest unique connector designs Tooling Tooling support manufacturing areas within company Provides tooling, punch press dies, molds, jigs fixtures used Positronic factory locations worldwide Machining Automatic screw machines produce finely crafted contacts hardware connector bodies Trained technicians operate machines from Tornos, Bechler Brown Sharpe Molding Molds plastic connector components such insulators, hoods, angle brackets more Overmold capability available Plating Applies gold other metal finishes connector components required thickness Plating conforms military specifications Quality Assurance Quality assurance system certified 9001 Maintains aggressive program Able test IEC, EIA, MIL-DTL-24308, MIL-DTL-28748, MIL-C-39029 MIL-C-85049 requirements Finished Stock Inventory Each main factory location maintains large inventory connector components accessories Same shipments available many standard connector products Stocking agreements available qualified customers Worldwide Sales Service Responsive attitude toward customer needs Fully trained sales staff located worldwide
Molding Machining
Finished Stock Inventory
Products described within this catalog protected more following patents: #4,721,472 #4,900,261 #5,255,580 #5,329,697 #6,260,268 Patented Canada, 1992 Other Patents Pending
Unless specified otherwise, dimensional tolerances are: ±0.001 inches [0.03 male contact mating diameters. ±0.003 inches [0.08 contact termination diameters. ±0.005 inches [0.13 other diameters. ±0.015 inches [0.38 other dimensions.
Positronic Industries believes data contained herein reliable. Since technical information given free charge, User employs such information discretion risk. Positronic Industries assumes responsibility results obtained damages incurred from such information whole part.
Positronic Industries' FEDERAL SUPPLY CODE [Cage Code] MANUFACTURERS 28198
CONNECTOR DESCRIPTIONS
Positronic Industries, Inc. www.connectpositronic.com
Combo-D Sub-D
COMBINATION CONTACT SUB-D CONNECTORS SERIES CONNECTORS
Series (Industrial quality, 807-2, Performance Level Two) Series (Military quality DESC 85039). Fixed signal contacts size ampere nominal rating. Size power contacts through ampere nominal rating. Size shielded high voltage contacts. Solder printed board mount contact terminations available both size size contacts. Twenty connector variants, through 46W4.
SIZE REMOVABLE CONTACTS
Power, shielded high voltage. Crimp solder terminations. Functional CBD, Series connector bodies.
SERIES CONNECTORS
Series. Size crimp removable signal contacts size crimp removable power shielded contacts. Thermocouple contact options available. connector variants, shell size through Military Industrial quality connectors conforming MIL-DTL-24308, DESC 85039 807-3, Performance Levels where applicable.
COMBINATION CONTACT DUAL PORT CONNECTORS
CBDP Series. Offers fifteen different combinations power signal contact stacked assemblies. Size signal contacts, ampere nominal rating, size power contacts, ampere maximum rating printed board mounting. ampere rating with solder crimp contacts.
CBD/CBM SERIES SIZE CONTACTS SERIES CBDP SERIES DESC CROSS REF.
TABLE CONTENTS
Positronic Industries, Inc. www.connectpositronic.com
Combo-D Sub-D
Series Contact Variants Technical Characteristics Standard Shell Assembly Solder Connector Straight Printed Board Mount Connector Compliant Press-Fit Connector, Suggested Printed Board Hole Sizes Temperature Rise Curve. Compliant Termination Press-Fit Connector Installation Tools Straight Printed Board Mount Power Contacts Printed Board Mount Power Contacts. Printed Board Mount Connector Metric System Printed Board Mount Connector Shell Size Printed Board Mount Connector Straight Printed Contact Hole Pattern with 0.078 [1.98] 0.094 [2.39] 0.125 [3.18] Power Contacts Printed Board Contact Hole Pattern with 0.125 [3.18] Power Contacts Straight Printed Board Mount Shielded Contacts Printed Board Mount Shielded Contacts. Straight Printed Board Mount Connector with Shielded Contacts Printed Board Mount Connector with Shielded Contacts. Straight Printed Board Mount Contact Hole Pattern with FDS4201D MDS4201D Shielded Contacts. Printed Board Mount Contact Hole Pattern with FRT4201D MRT4201D Shielded Contacts Ordering Information.
Size Contact Stabilization Feature Solder Power Contacts Crimp Power Contacts Reels Automatic Feed Pneumatic Crimp Tools Shielded Contacts Technical Characteristics. Shielded Contacts. Soldering Crimping Information Combination Series Coaxial Contacts High Voltage Contacts Technical Characteristics
30-31
Series Contact Variants Technical Characteristics Standard Shell Assembly Signal Crimp Removable Contacts Closed Crimp Barrel Reels Automatic Feed Pneumatic Crimp Tools Signal Crimp Removable Contacts- Thermocouple Contacts Crimping Information Series Crimp Signal Contacts Crimping Installation Tools. Ordering Information.
36-37
Combo-Dual Port Technical Characteristics Contact Variants Printed Board Mount Connector Printed Board Mount Contact Hole Pattern Ordering Information
39-41
DESC Part Number Cross Reference
DESC CROSS REF.
CBDP SERIES
SERIES
SIZE CONTACTS
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
Size Fixed Signal Contacts Size Removable Power, Shielded High Voltage Contacts Military/Industrial Quality Connectors
U.L. Recognized File #E49351 Recognized File #LR54219
D.E.S.C. 85039 Telecommunication U.L. File #E140980
Combo-D Series connectors permit mixed contact combinations power, shielded, high voltage signal contacts within same connector body. Twenty connector variants offered standard shell sizes. performance levels Combo-D Series connectors offered. Series connectors professional quality connectors recommended sheltered, noncorrosive indoor outdoor environments having normal ventilation, without temperature humidity controls. Series connectors military quality connectors recommended sheltered, mildly corrosive environments having wide range temperature, pressure humidity changes. These connectors will meet applicable performance dimensional requirements 807-2, Performance Level Two, D.E.S.C. 85039. Combo-D Series connectors utilize precision machined signal contacts. Connector variants available with contact terminations solder straight printed board mount terminations featuring choice inch metric printed board footprints. Power, shielded high voltage contacts removable, having solder straight printed board mount terminations. Power shielded contacts available with crimp terminations. level shielding requirements, ferrite inductors attached both signal power contacts connectors having contact terminations which straight angled printed board mounting applications. Additional details obtained from factory Applications Engineering Department. female power contacts feature Large Surface Area (L.S.A.) closed entry contact design which provides maximum mating surfaces between male female contacts reduced contact resistance during operation. wide assortment printed board mounting hardware, cable support hoods, locking systems available from stock. blind mating system available applications requiring connector coupling recessed areas mobile power coupling systems.
SERIES CONTACT VARIANTS
FACE VIEW MALE REAR VIEW FEMALE
SHELL SIZE
SHELL SIZE
3WK3*
11W1
SHELL SIZE
13W3
17W2
21W1
SHELL SIZE
13W6
17W5
21WA4
25W3
27W2
SHELL SIZE
24W7
36W4
43W2
47W1
SHELL SIZE
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
46W4
*3WK3: variant contains male contacts female contact variant contains female contacts male contact
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
COMBO-D SERIES TECHNICAL CHARACTERISTICS
MATERIALS FINISHES:
Insulator: Signal Contacts: Glass filled polyester MIL-M-24519 94V-0, blue color, composite. Male contacts-precision machined brass alloy. Female contacts-precision machined high tensile phosphor bronze. Gold flash over nickel plate gold 0.000050 [1.27µ] over nickel plate. Other finishes available upon request. Machined high conductivity copper alloy both male female contacts. Gold flash over nickel. Other finishes available upon request. Male contacts-precision machined brass. Female contacts-precision machined high tensile phosphor bronze. Power Contacts, Removable, Crimp Solder Termination:
MECHANICAL CHARACTERISTICS:
Signal Contacts, Fixed: Size contacts, male contact-0.040 inch [1.02mm] diameter. Series open entry design female contacts. Series closed entry design female contacts. Signal-9 lbs. [40N]. Power, shielded high voltage-22 [98N].
Signal Contact Plating:
Contact Retention Insulator:
Resistance Solder Iron Heat: 500°F [260°C] seconds duration 512-6. Signal Contact Terminations: Solder contacts 0.042 inch [1.06mm] minimum hole diameter [0.5 mm2] wire maximum. Straight Printed Board Mount 0.028 inch [0.71mm] diameter. Printed Board Mount 0.028 inch [0.71 diameter. Size contact, male contact 0.142 inch [3.61mm] diameter. Female contact features Large Surface Area (L.S.A.) closed entry contact design utilizing BeCu mechanical retention member. Male female contacts have terminations wire sizes AWG. Size contact, male contact 0.142 inch [3.61mm] diameter. Printed board terminations with 0.078 inch [1.98mm], 0.093 inch [2.36mm] 0.125 inch [3.18mm] diameters. table maximum cable sizes contact termination dimensions. Straight terminations 0.041 inch [1.04mm] minimum hole diameter. Male shells dimpled EMI/ESD ground paths. Trapezoidally shaped shells polarized jackscrews. Jackscrews riveted fasteners with 0.120 inch [3.05mm] diameter hole, threaded riveted fasteners with 4-40 threads nylon inserts. Rapid installation push-on fasteners threaded posts. Jackscrews. Series, operations, Series, 1,000 operations 512-5.
Power Contacts: Power Contact Plating: Shielded High Voltage Contacts:
Shielded High Voltage Signal contact-gold flash over nickel. Contact Plating: Other finishes available upon request. Shells: Steel brass with plate; zinc plate with dichromate seal, stainless steel passivated. Other materials finishes available upon request. Nylon plastic, brass with plate; zinc plate with dichromate seal. Phosphor bronze beryllium copper with plate. Steel with zinc plate dichromate seal, clear zinc plate. Composite plastic, 94V-0, brass steel with zinc plate dichromate seal.
Mounting Spacers Brackets: Push-On Fasteners: Jackscrew Systems: Hoods:
Power Contacts, Printed Board Mount:
Shielded Contacts, Removable: High Voltage Contacts: Shells: Polarization: Mounting Angle Brackets:
ELECTRICAL CHARACTERISTICS:
SIGNAL CONTACTS
Contact Current Rating: amperes nominal. Initial Contact Resistance: 0.008 ohms maximum. Proof Voltage: 1000 r.m.s.
POWER CONTACTS
Contact Current Rating: amperes nominal. Initial Contact Resistance: 0.0005 ohms max. 512-2, Test Proof Voltage: 1000 r.m.s. Mounting Printed Board: Locking Systems: Mechanical Operations, Signal Contacts:
SHIELDED CONTACTS
Initial Contact Resistance: 0.008 ohms maximum. Nominal Impedance: ohms. Insertion Loss: -0.46 -1.5 VSWR: 1.15 average 1.56 average Above values measured using frequency domain techniques. Proof Voltage: 1000 r.m.s. HIGH VOLTAGE CONTACTS Flash over Voltage: 3600 r.m.s. Proof Voltage: 2700 r.m.s. Initial Contact Resistance: 0.008 ohms maximum. CONNECTOR Insulator Resistance: Clearance Creepage Distance: Working Voltage: ohms. 0.039 inch [1.0mm] minimum. r.m.s.
CLIMATIC CHARACTERISTICS:
Temperature Range: Damp Heat, Steady State: -55°C +125°C. days.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
CBD3W3M00000
CBD5W5M00000
STANDARD SHELL ASSEMBLY
Typ.
0.050±0.010 [1.27±0.25]
0.036±0.008 [0.91±0.20]
0.220 [5.59] Max.
Mounting hole, places
OPTIONAL SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY WITH UNIVERSAL FLOAT MOUNTS
0.120±0.010 [3.05±0.25]
Mounting hole, places stainless steel shell option) [3.91] Mounting hole, places option)
0.032 [0.81] Total diametral float
-0.000 -0.00 Mounting hole, places
SHELL SIZES
SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE
±0.015 [0.38]
1.213 [30.81] 1.213 [30.81] 1.541 [39.14] 1.541 [39.14] 2.088 [53.04] 2.088 [53.04] 2.729 [69.32] 2.729 [69.32] 2.635 [66.93] 2.635 [66.93] 2.729 [69.32] 2.729 [69.32]
±0.005 [0.13]
±0.005 [0.13]
0.666 [16.92]
±0.005 [0.13]
0.984 [24.99] 0.984 [24.99] 1.312 [33.32] 1.312 [33.32] 1.852 [47.04] 1.852 [47.04] 2.500 [63.50] 2.500 [63.50] 2.406 [61.11] 2.406 [61.11] 2.500 [63.50] 2.500 [63.50]
±0.005 [0.13]
±0.005 [0.13]
0.329 [8.36]
±0.015 [0.38]
0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.605 [15.37] 0.605 [15.37] 0.668 [16.97] 0.668 [16.97]
±0.010 [0.25]
0.759 [19.28] 0.759 [19.28] 1.083 [27.51] 1.083 [27.51] 1.625 [41.28] 1.625 [41.28] 2.272 [57.71] 2.272 [57.71] 2.178 [55.32] 2.178 [55.32] 2.302 [58.47] 2.302 [58.47]
±0.010 [0.25]
0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.534 [13.56] 0.534 [13.56] 0.596 [15.14] 0.596 [15.14]
±0.005 [0.13]
0.233 [5.92] 0.243 [6.17] 0.233 [5.92] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17]
±0.010 [0.25]
0.422 [10.72] 0.429 [10.90] 0.422 [10.72] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90]
0.643 [16.33] 0.994 [25.25] 0.971 [24.66] 1.534 [38.96] 1.511 [38.38] 2.182 [55.42] 2.159 [54.84] 2.079 [52.81] 2.064 [52.43] 2.212 [56.18] 2.189 [55.60]
0.311 [7.90] 0.329 [8.36] 0.311 [7.90] 0.329 [8.36] 0.311 [7.90] 0.329 [8.36] 0.311 [7.90] 0.441 [11.20] 0.423 [10.74] 0.503 [12.78] 0.485 [12.32]
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
SOLDER CONNECTOR
CODE
max. [0.5 mm2]
Fixed female jackscrews
Fixed female jackscrew
Fixed male jackscrew
0.125 [3.18]
0.345 [8.76]
solder contacts, specify code step ordering information.
Fixed male female polarized jackscrews available. Specify code step ordering information.
Typical part number: CBD7W2M200T60
Typical part number: CBD7W2M200T0
STRAIGHT PRINTED BOARD MOUNT CONNECTOR
CODE
Fixed female jackscrews
CODE NUMBER
Swaged spacer with push-on fastener, phosphor bronze. 0.010 Min. [0.25]
-0.078 [1.98] 0.093 [2.36] 0.125 [3.18]
0.170 [4.32]
0.250 [6.35] 0.028 [0.71]
Typical part number: CBD17W2F35S60T2X
straight printed board mount contacts, specify code step ordering information.
CBD17W2F200E0 with FS4008D contacts.
CBD17W2M55B30T20
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
RATED CURRENT (AMPS)
CBD/CBM SERIES
Combo-D Sub-D
COMPLIANT PRESS-FIT CONNECTOR
CODE
Fixed female jackscrews Swaged spacer with 4-40 threads
0.265 [6.73] 0.225 [5.72] max. thread length mounting spacer 0.225 [5.72] 0.045 [1.14] Screw, 4-40 customer supplied
TYPICAL PART NUMBER: CBD17W2M93S0T20
SUGGESTED PRINTED BOARD HOLE SIZES
DRILLED HOLE 0.0010 [25µ] MINIMUM COPPER PLATE THICKNESS DRILLED HOLE 0.0010 [25µ] MINIMUM COPPER PLATE THICKNESS
0.0005 [13µ] MINIMUM SOLDER THICKNESS
[1.000+0.090-0.060] FINISHED HOLE
0.0005 [13µ] MINIMUM SOLDER THICKNESS
[13.02+0.05] FINISHED HOLE
Size contacts
Suggest 0.120 [3.05] hole mounting holes.
Size contacts
Note: other plating compositions, i.e. ENIG, (Electroless Nickel, Immersion Gold), consult Technical Sales.
TEMPERATURE RISE CURVE
TEMPERATURE RISE
Curve developed using CBD8W8M00000 CBD8W8F93S000 connectors MC4008D contacts (10.0mm2) size wire. contacts under load.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
COMPLIANT TERMINATION PRESS-FIT CONNECTOR INSTALLATION TOOLS
inch shaft Arbor Press.
Replaceable Seating Pins Single Contact Insertion Tool
Single Contact Removal Tool Arbor Press
Female Connector Seating Tool (Male shown)
Positronic recommended tools Series Connectors Contacts
CONTACT VARIANT
3WK3 11W1 13W3 17W2 21W1 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 46W4
CONNECTOR SEATING MALE
9512-1-0-41 9512-2-0-41
SINGLE CONTACT INSERTION MALE FEMALE
FEMALE
9512-18-0-41 9512-19-0-41
SINGLE CONTACT REMOVAL
CONTACT TECHNICAL SALES 9512-2-0-41 9512-2-0-41 9512-3-0-41 9512-3-0-41 9512-3-0-41 9512-3-0-41 9512-3-0-41 9512-4-0-41 9512-4-0-41 9512-4-0-41 9512-4-0-41 9512-4-0-41 9512-4-0-41 9512-5-0-41 9512-5-0-41 9512-5-0-41 9512-5-0-41 9512-16-0-41 9512-20-0-41 9512-21-0-41 9512-22-0-41 9512-23-0-41 9512-24-0-41 9512-25-0-41 9512-26-0-41 9512-27-0-41 9512-28-0-41 9512-29-0-41 9512-30-0-41 9512-31-0-41 9512-32-0-41 9512-33-0-41 9512-34-0-41 9512-35-0-41 9512-36-0-41 9512-37-0-41 capacity inch throat Size Female 855-347-18-41 SIZE CONTACTS REPAIRABLE SIZE CONTACTS REPAIRABLE SIZE CONTACTS REPAIRABLE 9512-103-0-0 SIZE CONTACTS ONLY 9512-104-0-0 SIZE CONTACTS ONLY 9512-105-0-0 SIZE CONTACTS ONLY
Arbor press connector seating tools-9530-1-0 Replacement pins connector seating tools.
Size Male 855-347-19-41 DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
STRAIGHT PRINTED BOARD MOUNTED POWER CONTACTS
Straight printed board mount power contacts mounted connector when ordered.
FEMALE CLOSED ENTRY, L.S.A.
0.142 [3.61]
MALE
0.170 [4.32]
0.626 [15.90]
0.634 [16.10]
PART NUMBER
FDS4314D FDS4312D FDS4310D
0.078 [1.98] 0.094 [2.39] 0.125 [3.18]
CURRENT RATING
Amps. Amps. Amps.
PART NUMBER
MDS4314D MDS4312D MDS4310D
Note:
0.078 [1.98] 0.094 [2.39] 0.125 [3.18]
CURRENT RATING
Amps. Amps. Amps.
Material High conductivity copper alloy. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available adding suffix part number.
Female power contacts feature Large Surface Area (L.S.A.) closed entry contact design which provides maximum mating surfaces between male female contacts reduced contact resistance during operation.
PRINTED BOARD MOUNT POWER CONTACTS
printed board mount power contacts mounted connector when ordered.
0.142 [3.61]
FEMALE
CLOSED ENTRY, L.S.A.
MALE
PART CURRENT NUMBER
FRT4314D FRT4414D FRT4714D FRT4814D FRT4310D FRT4410D Amps Amps Amps Amps Amps Amps
REF.
0.580 [14.73] 0.692 [17.58] 0.661 [16.79] 0.773 [19.63] 1.051 [26.70] 1.051 [26.70]
0.078 [1.98] 0.078 [1.98] 0.078 [1.98] 0.078 [1.98] 0.125 [3.18] 0.125 [3.18]
0.339 [8.61] 0.451 [11.46] 0.420 [10.67] 0.520 [13.21] 0.810 [20.57] 0.810 [20.57]
SHELL SIZE
BEND CODE
PART CURRENT NUMBER
MRT4314D MRT4414D MRT4714D MRT4814D MRT4310D MRT4410D Amps Amps Amps Amps Amps Amps
REF.
0.580 [14.73] 0.692 [17.58] 0.661 [16.79] 0.773 [19.63] 1.051 [26.70] 1.051 [26.70]
0.078 [1.98] 0.078 [1.98] 0.078 [1.98] 0.078 [1.98] 0.125 [3.18] 0.125 [3.18]
0.339 [8.61] 0.451 [11.46] 0.420 [10.67] 0.520 [13.21] 0.810 [20.57] 0.810 [20.57]
SHELL SIZE
BEND CODE
Material High conductivity copper alloy. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available adding suffix part number.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Note:
Female power contacts feature Large Surface Area (L.S.A.) closed entry contact design which provides maximum mating surfaces between male female contacts reduced contact resistance during operation.
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
0.220 [5.59] Max.
PRINTED BOARD MOUNT CONNECTOR WITH 0.125 [3.18] POWER CONTACTS
CODE 0.283 [7.19] CONTACT EXTENSION
amps nominal) CBD***R7*** 0.283 [7.19] CONTACT EXTENSION SHELL SIZE
SHELL SIZE
1.204 [30.58] 1.532 [38.91] 2.072 [52.63] 2.720 [69.09] 2.626 [66.70]
0.984 [24.99] 1.312 [33.32] 1.852 [47.04] 2.500 [63.50] 2.406 [61.11]
0.339 [8.61] 0.339 [8.61] 0.339 [8.61] 0.339 [8.61] 0.395 [10.03]
0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.112 [2.84] Typ. 0.112 [2.84] Typ. 0.810 [20.57]
Fixed female jackscrews
±0.008
SHELL SIZE SHELL SIZE SHELL SIZE SHELL SIZE
Specify code step ordering information.
0.810 [20.57] 0.112 [2.84] Typ. Numbering shown rear view male face view female.
Typical part number: CBD17W2M57R7NT20
Push-on fastener, 0.170 [4.32] beryllium copper. Nominal
0.125 [3.18] 0.028 [0.71]
Typical part number: CBD36W4F57R7NT2X
0.220 [5.59] Max.
PRINTED BOARD MOUNT CONNECTOR WITH 0.078 [1.98] POWER CONTACTS
CODE 0.283 [7.19] CONTACT EXTENSION
amps nominal) CBD***R7*** 0.283 [7.19] CONTACT EXTENSION SHELL SIZE
1.204 [30.58] 1.532 [38.91] 2.072 [52.63] 2.720 [69.09] 2.626 [66.70]
0.984 [24.99] 1.312 [33.32] 1.852 [47.04] 2.500 [63.50] 2.406 [61.11]
0.339 [8.61] 0.339 [8.61] 0.339 [8.61] 0.339 [8.61] 0.395 [10.03]
0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.112 [2.84] Typ. 0.112 [2.84] Typ.
Fixed female jackscrews
±0.008
SHELL SIZE SHELL SIZE SHELL SIZE SHELL SIZE SHELL SIZE
0.451 [11.46]
Specify code step ordering information.
0.339 [8.61] 0.112 [2.84] Typ.
Numbering shown rear view male face view female.
Typical part number: CBD17W2M55R7NT20
Push-on fastener, beryllium copper. 0.170 [4.32] Nominal
0.078 [1.98] 0.028 [0.71]
Typical part number: CBD36W4F55R7NT2X
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
0.125 [3.18] Typ. 0.220 [5.59] Max.
METRIC SYSTEM PRINTED BOARD MOUNT CONNECTOR WITH 0.078 [1.98] POWER CONTACTS
CODE 0.370 [9.40] CONTACT EXTENSION
amps nominal) CBD***R7*** 0.370 [9.40] CONTACT EXTENSION SHELL SIZE
SHELL SIZE ±0.008
1.204 [30.58] 1.532 [38.91] 2.072 [52.63] 2.720 [69.09] 2.626 [66.70]
0.984 [24.99] 1.312 [33.32] 1.852 [47.04] 2.500 [63.50] 2.406 [61.11]
0.420 [10.67] 0.420 [10.67] 0.420 [10.67] 0.420 [10.67] 0.470 [11.94]
0.370 [9.40] 0.370 [9.40] 0.370 [9.40] 0.370 [9.40] 0.370 [9.40] 0.520 [13.21]
Fixed female jackscrews
SHELL SIZE SHELL SIZE SHELL SIZE SHELL SIZE
0.100 [2.54] Typ. 0.100 [2.54] Typ. Specify code step ordering information. 0.420 [10.67] 0.100 [2.54] Typ. Numbering shown rear view male face view female.
Typical part number: CBD17W2M75R70T20
0.125 [3.18] Typ. 0.220 [5.59] Max.
0.170 [4.32] Nominal 0.024 [0.61]
0.078 [1.98]
Typical part number: CBD36W4M75R70T20
METRIC SYSTEM PRINTED BOARD MOUNT CONNECTOR WITH 0.125 [3.18] POWER CONTACTS
CODE 0.370 [9.40] CONTACT EXTENSION
amps nominal) CBD***R7*** 0.370 [9.40] CONTACT EXTENSION SHELL SIZE
1.204 [30.58] 1.532 [38.91] 2.072 [52.63] 2.720 [69.09] 2.626 [66.70]
0.984 [24.99] 1.312 [33.32] 1.852 [47.04] 2.500 [63.50] 2.406 [61.11]
0.420 [10.67] 0.420 [10.67] 0.420 [10.67] 0.420 [10.67] 0.470 [11.94]
0.370 [9.40] 0.370 [9.40] 0.370 [9.40] 0.370 [9.40] 0.370 [9.40] 0.810 [20.57]
Fixed female jackscrews
SHELL SIZE ±0.008 SHELL SIZE SHELL SIZE SHELL SIZE SHELL SIZE
0.100 [2.54] Typ. Numbering shown rear view male face view female. 0.100 [2.54] Typ. 0.100 [2.54] Typ.
Specify code step ordering information.
0.810 [20.57]
Typical part number: CBD17W2M77R70T20
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
0.170 [4.32] Nominal 0.024 [0.61]
0.125 [3.18]
Typical part number: CBD36W4M77R70T20
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
SHELL SIZE PRINTED BOARD MOUNT CONNECTOR WITH 0.078 [1.98] POWER CONTACTS
CODE 0.283 [7.19] CONTACT EXTENSION
CONNECTOR VARIANT 46W4 amps nominal)
Fixed female jackscrews
0.451[11.46]
Shell size connector
±0.008 2.500 [63.50]
0.507[12.88] 0.283[7.19]-Specify code step ordering information 0.112[2.84] Typ.
2.720 [69.09]
Numbering shown rear view male face view female
Typical part number: CBD46W4M55R7NT20
0.170[4.32] Nominal
Push-on fastener, beryllium copper
0.078[1.98] 0.028[0.71]
SHELL SIZE PRINTED BOARD MOUNT CONNECTOR WITH 0.125 [3.18] POWER CONTACTS
CODE 0.283 [7.19] CONTACT EXTENSION
CONNECTOR VARIANT 46W4 amps nominal)
Fixed female jackscrews
0.451[11.46]
Shell size connector
±0.008 2.500 [63.50]
0.810 [20.57] 0.283[7.19]-Specify code step ordering information 0.112[2.84] Typ.
2.720 [69.09]
Numbering shown rear view male face view female
Typical part number: CBD46W4M57R7NT20
0.170[4.32] Nominal
Push-on fastener, beryllium copper
0.125[3.18] 0.028[0.71]
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN WITH 0.078 [1.98] 0.094 [2.39] 0.125 [3.18] POWER CONTACTS
Hole identification shown male connector, mirror image female connector. Mount connector with mating face positioned follow direction arrow.
0.218 [5.54] TYP. 0.162 [4.11] TYP. 0.270 [6.86] TYP. 0.270 [6.86] TYP. 0.054 [1.37] TYP. 0.108 [2.74] TYP. 0.162 [4.11] TYP.
0.492 [12.50] TYP.
0.656 [16.66] TYP.
0.108 [2.74] TYP. 0.656 [16.66] TYP.
0.268 [6.81] TYP. 0.034 [0.86]
3W3/3WK3
0.108 [2.74] TYP. 0.216 [5.49] 0.162 [4.11]
0.216 [5.49] TYP. 0.656 [16.66] TYP.
11W1
0.108 [2.74] TYP. 0.054 [1.37] TYP.
0.570 [14.48] TYP. 0.926 [23.52] TYP.
0.109 [2.77] TYP. 0.109 [2.77] TYP. 0.218 [5.54] TYP.
0.306 [7.77] 0.570 [14.48] TYP. 0.926 [23.52] TYP.
0.306 [7.77] 0.570 [14.48] TYP. 0.926 [23.52] TYP.
13W3
0.650 [16.51] 0.250 [6.35] TYP. 0.150 [3.81]
0.054 [1.37] TYP. 0.544 [13.82] TYP. 0.926 [23.52] TYP.
0.163 [4.14] TYP. 0.926 [23.52] TYP.
21W1
0.275 [6.99] TYP. 0.343 [8.71] 0.109 [2.77] TYP. 0.893 [22.68] TYP. 0.618 [15.70] TYP. 0.109 [2.77] TYP.
0.600 [15.24] 0.900 [22.86] TYP. 1.250 [31.75] TYP.
17W2
0.707 [17.96] 0.109 [2.77] TYP. 0.652 [16.56]
0.092 [2.34] 0.265 [6.73] TYP. 1.250 [31.75] TYP.
0.055 [1.40] TYP. 0.618 [15.70] 1.250 [31.75] TYP.
0.055 [1.40] TYP. 1.250 [31.75] TYP.
13W6
17W5
21WA4
0.893 [22.68] TYP. 0.109 [2.77] TYP.
0.893 [22.68] TYP. 0.109 [2.77] TYP. 0.270 [6.86] TYP.
0.055 [1.40] TYP. 0.618 [15.70] 1.250 [31.75] TYP.
0.055 [1.40] TYP. 1.250 [31.75] TYP.
0.109 [2.77] TYP. 1.203 [30.56] TYP.
25W3
0.810 [20.57] TYP. 0.055 [1.40] TYP. 0.109 [2.77] TYP.
27W2
24W7
0.810 [20.57] 0.540 [13.72] 0.109 [2.77] TYP.
CODE
0.112 [2.84] 0.056 [1.42] 0.100 [2.54] 0.050 [1.27]
0.112 [2.84] 0.056 [1.42] 0.112 [2.84] 0.056 [1.42]
36W4
0.100 [2.54] 0.050 [1.27] 0.100 [2.54]
0.900 [22.86] TYP. 0.650 [16.51] TYP.
0.270 [6.86] 0.540 [13.72] 1.203 [30.56] TYP.
0.055 [1.40] TYP. 1.203 [30.56] TYP.
43W2
0.810 [20.57] 0.109 [2.77] TYP. PLACES
0.060 [1.52] TYP. TYP. 0.120 [3.05] TYP. PLACES 1.250 [31.75] TYP.
0.055 [1.40] TYP. 1.203 [30.56] TYP.
47W1
46W4
0.050 [1.27]
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Suggest Suggest Suggest Suggest Suggest
0.045 0.098 0.114 0.145 0.123
[1.14] hole signal contact termination positions. [2.49] hole 0.078 [1.98] power contact termination positions. [2.90] hole 0.094 [2.39] power contact termination positions. [3.68] hole 0.125 [3.18] power contact termination positions. ±0.003 [3.12] hole mounting connector with push-on fasteners.
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
PRINTED BOARD CONTACT HOLE PATTERN WITH 0.125 [3.18] POWER CONTACTS
Hole identification shown male connector, mirror image female connector. Mount connector with mating face positioned follow direction arrow.
0.218 [5.54] TYP. 0.162 [4.11] TYP. 0.270 [6.86] TYP. 0.270 [6.86] TYP. 0.054 [1.37] TYP. 0.108 [2.74] PLACES. 0.162 [4.11] TYP.
0.492 [12.50] TYP.
0.656 [16.66] TYP.
0.268 [6.81] TYP. PLACES 0.034 [0.86]
3W3/3WK3
0.108 [2.74] TYP. PLACES 0.216 [5.49] 0.162 [4.11]
0.108 [2.74] TYP. PLACES 0.656 [16.66] TYP.
0.216 [5.49] TYP. 0.656 [16.66] TYP.
0.108 [2.74] TYP. PLACES 0.054 [1.37] TYP.
11W1
0.570 [14.48] TYP. 0.926 [23.52] TYP.
0.109 [2.77] TYP. PLACES 0.109 [2.77] TYP. PLACES 0.218 [5.54] TYP.
0.306 [7.77] 0.570 [14.48] TYP. 0.926 [23.52] TYP.
0.306 [7.77] 0.570 [14.48] TYP. 0.926 [23.52] TYP. 0.650 [16.51]
13W3
0.250 [6.35] TYP. PLACES 0.150 [3.81]
0.054 [1.37] TYP. 0.544 [13.82] TYP. 0.926 [23.52] TYP.
0.163 [4.14] TYP. 0.926 [23.52] TYP.
0.600 [15.24] 0.900 [22.86] TYP. 1.250 [31.75] TYP.
21W1
0.893 [22.68] TYP. 0.618 [15.70] TYP. 0.109 [2.77] TYP. PLACES
17W2
0.707 [17.96] 0.109 [2.77] TYP. PLACES 0.652 [16.56] 0.275 [6.99] TYP. PLACES 0.343 [8.71] 0.109 [2.77] TYP. PLACES
0.092 [2.34] 0.265 [6.73] TYP. PLACES 1.250 [31.75] TYP.
0.055 [1.40] TYP. 0.618 [15.70] 1.250 [31.75] TYP.
0.055 [1.40] TYP. 1.250 [31.75] TYP.
13W6
0.893 [22.68] TYP. 0.109 [2.77] TYP. PLACES
17W5
0.893 [22.68] TYP. 0.109 [2.77] TYP. PLACES
21WA4
0.270 [6.86] TYP. PLACES
0.055 [1.40] TYP. 0.618 [15.70] 1.250 [31.75] TYP.
0.055 [1.40] TYP. 1.250 [31.75] TYP.
0.109 [2.77] TYP. PLACES 1.203 [30.56] TYP.
25W3 CODE
0.810 [20.57] TYP. 0.055 [1.40] TYP.
27W2
0.810 [20.57] 0.540 [13.72] 0.109 [2.77] TYP. PLACES
24W7
0.471 [11.96] 0.415 [10.54] 0.359 [9.12] 0.112 [2.84] 0.056 [1.42]
0.390 [9.91] 0.340 [8.64] 0.290 [7.37] 0.100 [2.54] 0.050 [1.27]
0.109 [2.77] TYP. PLACES
0.270 [6.86] 0.540 [13.72] 1.203 [30.56] TYP.
0.055 [1.40] TYP. 1.203 [30.56] TYP.
36W4
0.900 [22.86] TYP. 0.650 [16.51] TYP.
43W2
0.810 [20.57] 0.109 [2.77] TYP. PLACES
0.060 [1.52] TYP.
TYP.
0.055 [1.40] TYP. 1.203 [30.56] TYP.
0.120 [3.05] TYP. PLACES 1.250 [31.75] TYP.
Suggest 0.045 [1.14] hole signal contact termination positions. 46W4 Suggest 0.145 [3.68] hole power contact termination positions. Suggest 0.123±0.003 [3.12] hole mounting connector with push-on fasteners.
47W1
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
STRAIGHT PRINTED BOARD MOUNTED SHIELDED CONTACTS
Straight printed board mount shielded contacts mounted connector when ordered.
0.156 [3.96] 0.200 [5.08]
0.040 [1.02]
0.156 [3.96] 0.200 [5.08] 0.152 [3.86]
Suggest 0.045 [1.14] hole 0.200 [5.08]
0.037 [0.94] Across points
FEMALE
0.481 [12.22]
MALE
0.181 [4.60]
PART
FDS4201D
0.025 [0.64]
PART
MDS4201D
0.489 [12.42]
0.025 [0.64]
0.181 [4.60]
0.100 [2.54]
FDS4201D MDS4201D Contact hole pattern
Material Copper alloy with PTFE teflon insulator. Plating: Signal contact 0.000030 [0.75µ] gold over nickel Contact body -Gold flash over nickel. Signal contact 0.000050 [1.27µ] gold over nickel Contact body 0.000030 [0.75µ] gold over nickel available adding suffix part number. *Technical characteristics listed page
PRINTED BOARD MOUNT SHIELDED CONTACTS
printed board mount shielded contacts mounted connector when ordered.
0.162 [4.11] Suggest 0.045 [1.14] hole 0.037 [0.94] Across points 0.200 [5.08]
0.162 [4.11] 0.040 [1.02] 0.152 [3.86]
FEMALE
0.827 [21.01]
MALE
0.470 [11.94]
PART
FRT4201D 0.100 [2.54]
0.240 [6.10]
0.259 [6.58]
PART
MRT4201D
0.829 [21.06]
0.240 [6.10]
0.253 [6.43]
0.470 [11.94]
FRT4201D MRT4201D Contact hole pattern
Material Copper alloy with PTFE teflon insulator. Plating: Signal contact 0.000030 [0.75µ] gold over nickel Contact body -Gold flash over nickel. Signal contact 0.000050 [1.27µ] gold over nickel Contact body 0.000030 [0.75µ] gold over nickel available adding suffix part number.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
*Technical characteristics listed page
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
STRAIGHT PRINTED BOARD MOUNT CONNECTOR WITH SHIELDED CONTACTS
CODE CONNECTOR WITH FDS4201D MDS4201D CONTACTS
Fixed female jackscrews
0.250 [6.35]
0.170 [4.32]
0.028 [0.71]
Push-on fastener, phosphor bronze 0.156 [3.96] 0.025 [0.64] 0.028 [0.71] Numbering shown rear view male face view female.
0.037 [0.94] Across points
Typical part number: CBD17W2M65S60T20
PRINTED BOARD MOUNT CONNECTOR WITH SHIELDED CONTACTS
CODE CONNECTOR WITH FRT4201D MRT4201D CONTACTS
CBD**85**** 0.283 [7.19] CONTACT EXTENSION SHELL SIZE
SHELL SIZE Fixed female jackscrews ±0.008 SHELL SIZE SHELL SIZE SHELL SIZE SHELL SIZE
1.204 [30.58] 1.532 [38.91] 2.072 [52.63] 2.720 [69.09] 2.626 [66.70]
0.984 [24.99] 1.312 [33.32] 1.852 [47.04] 2.500 [63.50] 2.406 [61.11]
0.339 [8.61] 0.339 [8.61] 0.339 [8.61] 0.339 [8.61] 0.395 [10.03]
0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.283 [7.19] 0.545 [13.84]
Numbering shown rear view male face view female. 0.156 [3.96] 0.170 [4.32] Nominal specify code step ordering information 0.028 [0.71] place, 0.037 [0.94] Across points places 0.470 [11.94] 0.112 [2.84] Typ. specify code step ordering information
0.112 [2.84] Typ. 0.470 [11.94] Push-on fastener, beryllium copper 0.028 [0.71]
Typical part number: CBD17W2M85R7NT20
Typical part number: CBD36W4M85R7NT20
Note: Shell size connectors supplied inverted when ordered with printed board mount shielded contacts.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
STRAIGHT PRINTED BOARD MOUNT CONTACT HOLE PATTERN WITH FDS4201D MDS4201D SHIELDED CONTACTS
Hole identification shown male connector, mirror image female connector.
0.218 [5.54] Typ. 0.162 [4.11] Typ. 0.200 [5.08] 0.100 [2.54] 0.056 [1.42] 0.492 [12.50] Typ. 0.108 [2.74] Typ. 0.270 [6.86] Typ. 0.112 [2.84] 0.100 [2.54] 0.054 [1.37] Typ.
0.200 [5.08] 0.200 [5.08]
0.112 [2.84]
0.200 [5.08]
0.108 [2.74] Typ. 0.162 0.112 [2.84] [4.11] Typ. 0.056 [1.42] 0.216 [5.49] Typ. 0.656 [16.66] Typ.
0.656 [16.66] Typ.
0.100 [2.54]
3W3/3WK3
0.056 [1.42] 0.100 0.270 [6.86] Typ. [2.54] 0.656 [16.66] Typ.
0.108 [2.74] Typ. 0.112 [2.84] 0.054 [1.37] Typ. 0.108 [2.74] Typ. 0.200 [5.08]
11W1
0.109 [2.77] Typ. 0.054 [1.37] Typ. 0.112 [2.84] 0.056 [1.42] 0.544 [13.82] Typ. 0.926 [23.52] Typ.
0.268 [6.81] Typ. 0.034 [0.86] 0.200 [5.08] 0.100 [2.54] 0.570 Typ. 0.100 [14.48] [2.54] 0.926 [23.52] Typ.
0.216 [5.49] 0.162 [4.11] 0.200 [5.08]
0.272 [6.91] Typ. 0.218 [5.54] Typ. 0.200 [5.08] 0.100 [2.54] 0.056 [1.42] 0.100 0.163 [4.14] [2.54] 0.926 [23.52] Typ.
0.056 [1.42] 0.306 [7.77] 0.570 [14.48] Typ. 0.926 [23.52] Typ.
0.109 [2.77] Typ. 0.112 [2.84] 0.200 [5.08] 0.650 [16.51] 0.150 [3.81]
0.100 [2.54] 0.306 [7.77] 0.570 [14.48] Typ. 0.926 [23.52] Typ.
17W2
13W3
0.200 [5.08] 0.707 [17.96] 0.652 [16.56] 0.109 [2.77] Typ.
0.250 [6.35] Typ.
0.112 [2.84]
0.100 [2.54] 0.600 [15.24] 0.900 [22.86] Typ. 1.250 [31.75] Typ.
21W1
0.056 [1.42] 0.092 [2.34] 0.265 [6.73] Typ. 1.250 [31.75] Typ.
0.275 [6.99] Typ. 0.112 [2.84] 0.109 [2.77] Typ. 0.055 [1.40] Typ.
13W6
0.109 [2.77] Typ. 0.055 [1.40] Typ.
0.343 [8.71] 0.200 [5.08] 0.109 [2.77] Typ.
0.200 [5.08]
0.112 [2.84]
0.100 [2.54]
17W5
0.056 [1.42] 0.055 [1.40] Typ. 0.618 [15.70] 1.250 [31.75] Typ.
Typ. 0.100 0.618 [15.70] [2.54] 0.893 [22.68] Typ. 1.250 [31.75] Typ.
21WA4
0.200 [5.08] 0.100 [2.54]
25W3
0.109 [2.77] Typ. 0.055 [1.40] Typ.
0.618 [15.70] 0.056 [1.42] 0.893 [22.68] Typ. 1.205 [31.75] Typ.
0.810 [20.57] Typ. 0.224 [5.69]
0.200 [5.08]
0.109 [2.77] Typ. 0.055 [1.40] Typ.
0.112 [2.84]
0.270 [6.86] Typ. 0.112 [2.84]
0.100 [2.54]
0.056 [1.42] 0.893 [22.68] Typ. 1.250 [31.75] Typ.
0.056 [1.42] 0.109 [2.77] Typ. 1.203 [30.56] Typ.
27W2
0.810 [20.57] 0.224 [5.69] 0.540 [13.72] 0.810 [20.57] 0.055 [1.40] Typ.
24W7
0.200 [5.08] 0.100 [2.54]
0.112 0.270 [6.86] [2.84] 0.540 [13.72] 1.203 [30.56] Typ.
36W4
0.200 [5.08] 0.100 [2.54] 0.120 [3.05] Typ. 0.060 [1.52] Typ.
0.100 [2.54] Typ.
0.112 [2.84]
0.056 0.055 [1.42] [1.40] Typ. 0.109 [2.77] Typ. 1.203 [30.56] Typ.
0.112 [2.84] 0.224 [5.69]
0.109 0.056 [2.77] Typ. [1.42] 1.203 [30.56] Typ.
0.650 [16.51] Typ.
0.050 [1.27]
47W1
0.900 [22.86] Typ. 1.250 [31.75] Typ.
43W2
46W4
Suggest 0.045 [1.14] hole signal contact termination position. Suggest 0.123±0.003 [3.12] hole mounting connector with push-on fasteners.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
PRINTED BOARD MOUNT CONTACT HOLE PATTERN WITH FRT4201D MRT4201D SHIELDED CONTACTS
Hole identification shown male connector, mirror image female connector. Mount connector with mating face positioned follow direction arrow.
0.218 [5.54] Typ. 0.162 [4.11] Typ. 0.200 [5.08] 0.100 [2.54] 0.131 [3.33] 0.100 0.056 [1.42] [2.54] 0.492 [12.50] Typ. 0.131 [3.33] 0.100 [2.54] 0.656 [16.66] Typ. 0.131 [3.33] 3W3/3WK3 0.056 [1.42] 0.270 [6.86] Typ. 0.656 [16.66] Typ. 0.100 [2.54] 0.056 [1.42] 0.216 [5.49] Typ. 0.656 [16.66] Typ. 0.112 [2.84] 0.270 [6.86] Typ. 0.200 [5.08] 0.054 [1.37] Typ. 0.108 [2.74] Typ. 0.112 [2.84] 0.108 [2.74] Typ. 0.112 [2.84]
0.200 [5.08]
0.200 [5.08] 0.162 [4.11] Typ.
0.268 [6.81] Typ. 0.034 [0.86] 0.200 [5.08] 0.131 [3.33]
0.216 [5.49] 0.162 [4.11] 0.108 [2.74] Typ. 0.108 [2.74] Typ. 0.112 [2.84] 0.054 [1.37] Typ.
0.131 [3.33] 0.200 [5.08] 0.131 [3.33]
11W1
0.109 [2.77] Typ. 0.112 [2.84]
0.054 [1.37] Typ.
0.100 [2.54] 0.570 [14.48] Typ. 0.926 [23.52] Typ.
0.056 [1.42] 0.306 [7.77] 0.570 [14.48] Typ. 0.926 [23.52] Typ.
0.109 [2.77] Typ. 0.218 [5.54] Typ. 0.200 [5.08] 0.100 [2.54] 0.131 [3.33] 0.100 [2.54] 0.200 [5.08] 0.112 [2.84]
0.100 [2.54] 0.306 [7.77] 0.570 [14.48] Typ. 0.926 [23.52] Typ.
0.056 [1.42] 0.544 [13.82] Typ. 0.926 [23.52] Typ.
13W3
0.250 [6.35] Typ. 0.200 [5.08] 0.707 [17.96] 0.652 [16.56]
17W2
0.109 [2.77] Typ. 0.112 [2.84]
0.650 [16.51] 0.150 [3.81]
0.056 [1.42] 0.163 [4.14] Typ. 0.926 [23.52] Typ.
0.131 [3.33]
0.600 [15.24] 0.900 [22.86] Typ. 1.250 [31.75] Typ.
0.100 [2.54] 0.131 [3.33]
21W1
0.343 [8.71] 0.109 [2.77] Typ. 0.200 [5.08] 0.100 [2.54] 0.131 [3.33] 0.056 [1.42] 0.055 [1.40] Typ. 0.618 [15.70] 1.250 [31.75] Typ. 0.275 [6.99] Typ. 0.112 [2.84]
0.056 [1.42] 0.092 [2.34] 0.265 [6.73] Typ. 1.250 [31.75] Typ.
13W6
0.100 [2.54] 0.200 [5.08] 0.109 [2.77] Typ. 0.055 [1.40] Typ. 0.112 [2.84]
0.109 [2.77] Typ. 0.055 [1.40] Typ.
0.131 [3.33] 0.618 [15.70] Typ. 0.893 [22.68] Typ. 1.250 [31.75] Typ.
0.056 [1.42] 0.618 [15.70] 0.893 [22.68] Typ. 1.250 [31.75] Typ.
17W5
0.109 [2.77] Typ. 0.055 [1.40] Typ. 0.200 [5.08] 0.100 [2.54] 0.131 [3.33] 0.893 [22.68] Typ. 0.056 [1.42] 0.112 [2.84] 0.374 [9.50]
21WA4
0.109 [2.77] Typ. 0.200 [5.08] 0.100 [2.54]
25W3
0.109 [2.77] Typ. 0.055 [1.40] Typ. 0.374 [9.50]
1.250 [31.75] Typ.
27W2
0.075 0.270 [1.91] [6.86] Typ. 1.203 [30.56] Typ.
0.270 [6.86] 0.540 [13.72] 0.810 [20.57] Typ. 1.203 [30.56] Typ.
24W7
0.109 [2.77] Typ. 0.100 [2.54] 0.055 [1.40] Typ. 0.112 [2.84] 0.112 [2.84] 0.109 [2.77] Typ. 0.055 [1.40] Typ.
36W4
0.100 [2.54] 0.112 [2.84] 0.112 [2.84]
0.200 [5.08] 0.075 [1.91]
0.540 [13.72] 0.810 [20.57] 1.203 [30.56] Typ.
0.150 [3.81] 0.200 [5.08] 0.075 [1.91]
0.810 [20.57] 1.203 [30.56] Typ.
0.150 [3.81]
47W1
43W2
Suggest 0.045 [1.14] hole signal contact termination positions. Suggest 0.123±0.003 [3.12] hole mounting connector with push-on fasteners.
Note: Shell size connectors supplied inverted when ordered with printed board mount shielded contacts.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBD/CBM SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Sub-D
ORDERING INFORMATION CODE NUMBERING SYSTEM
Specify Complete Connector Following Steps Through Insert When Step Used
STEP
17W2
STEP Basic Series
Industrial Quality with Open Entry Signal Contacts Military Conformance with "Closed Entry" Signal Contacts plated 0.000050 [1.27µ] gold over nickel plate
**STEP Special Options
759.0 Blind Mate Pilot 759.1 Blind Mate Panel Signal contacts plated 0.000030 [0.75µ] gold over nickel.
STEP Shell Options STEP Combo-D Series Connector Variants
Shell Size Shell Size 3W3, 3WK3, 7W2, 11W1 Shell Size 5W5, 9W4, 13W3, 17W2, 21W1 Shell Size 8W8, 13W6, 17W5, 21WA4, 25W3, 27W2 Shell Size 24W7, 36W4, 43W2, 47W1 Shell Size 46W4 Zinc Plated with Dichromate Seal Stainless Steel Plated Plated Dimpled-male connector only
*STEP Locking Polarizing Systems
None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male Female Polarized Jackscrews.
STEP Connector Gender
Male Female
*STEP Hoods Push-On Fasteners
None Hood, Side Opening, robust extended height, plastic composite, with rotating male jackscrews, shell sizes through Hood, Opening, Metal, shell sizes through Hood, EMI/RFI, Metal, shell sizes through Push-on Fastener, Mounting Brackets
STEP Type Contacts
Connector ordered without size power shielded high voltage removable contacts. pages contact part numbers. Available 3W3, 3W3K, 8W8. Solder, Signal Contacts only. Solder, Straight Printed Board Mount with Signal Contacts, 0.170 [4.32] Tail Length. Solder, Straight Printed Board Mount with Signal 0.078 [1.98] Power Contacts, 0.170 [4.32] Tail Length. Solder, Straight Printed Board Mount with Signal 0.094 [2.39] Power Contacts, 0.170 [4.32] Tail Length. Solder, Straight Printed Board Mount with Signal 0.125 [3.18] Power Contacts, 0.170 [4.32] Tail Length. Solder, Printed Board Mount with Signal Contacts only, 0.283 [7.19] Signal Contact Extension. Solder, Printed Board Mount with Signal 0.078 [1.98] Power Contacts, 0.283 [7.19] Signal Contact Extension. Solder, Printed Board Mount with Signal 0.125 [3.18] Power Contacts, 0.283 [7.19] Signal Contact Extension. Solder, Straight Printed Board Mount with Signal Shielded Contacts MDS/FDS 4201D footprint, 0.170 [4.32] Signal Contact Tail Length. Solder, Metric System Printed Board Mount with Signal Contacts only, 0.370 [9.40] Signal Contact Extension. Solder, Metric System Printed Board Mount with Signal 0.078 [1.98] Power Contacts, 0.370 [9.40] Signal Contact Extension. Solder, Metric System Printed Board Mount with Signal 0.125 [3.18] Power Contacts, 0.370 [9.40] Signal Contact Extension. Solder, Printed Board Mount with Signal Shielded Contacts MRT/FRT 4201D footprint, 0.283 [7.19] Signal Contact Extension. Size Omega type compliant Size Bi-Spring type compliant, termination length 0.225 [5.72]
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
*STEP Mounting Style
Mounting Hole, 0.120 [3.05] Mounting Hole, 0.154 [3.91] Bracket, Mounting, Metal with Cross Bracket, Mounting, Plastic with Cross Float Mounts, Universal Threaded Post, Brass, 0.250 [6.35] Length Threaded Post, Nylon, 0.250 [6.35] Length Bracket, Mounting, Metal, Swaged Connector with 4-40 Thread Fixed Female Jackscrews with Cross Bracket, Mounting, Metal, Swaged Connector with 0.120 [3.05] Mounting Hole with Cross Bracket, Mounting, Metal, Swaged Connector with 4-40 Threads with Cross Bracket, Mounting, Metal, Swaged Connector with 4-40 Locknut with Cross Swaged Spacer, 4-40 Threads, 0.250 [6.35] Length, Spacer length changes .0265 [6.73] when used conjunction with Code contacts Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length Swaged Locknut, 4-40 Threads Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.250 [6.35] Length
*For additional information accessories listed steps Accessory Catalog. **When using hood with variants, extended height hood. Accessories Catalog extended hood options. ***Not available shell size 46W4.
Combo-D Sub-D
SIZE REMOVABLE CONTACTS, POWER, SHIELDED HIGH VOLTAGE
CBD, CBM, SERIES
Positronic Industries, Inc. www.connectpositronic.com
SIZE CONTACT STABILIZATION FEATURE
minimizes float Size Contact positions
CONTACT
CONTACT
STABILIZER
size male contacts removed toward rear after utilizing front release tooling. Space must provided between contact connector molding tooling slide over mating portion contact. This fact allows contact float.
some applications this float creates problems alignment during mating. Many make contact variants offer integral stabilizing feature minimize problems created float size contacts. alternate tool used remove contact necessary. Tool number 4311-0-1-0.
stablization feature currently available following male contact variants:
CBD/CBM3W3M
CBD/CBM8W8M
CBD/CBM3W3M
CBD/CBM8W8M
-1570.4 part number. Example: CBD3W3M00000-1570.4
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SIZE CONTACTS
INSULATOR
INSULATOR
SIZE REMOVABLE CONTACTS, POWER, SHIELDED HIGH VOLTAGE
Positronic Industries, Inc. www.connectpositronic.com CBD, CBM, SERIES
Combo-D Sub-D
REMOVABLE SOLDER POWER CONTACTS
Solder power contacts supplied kitted with connector ordered separately.
*FEMALE
CLOSED ENTRY, L.S.A.
0.142 [3.61] 0.402 [10.21]
MALE
SIZE CONTACTS
PART NUMBER
FS4008D FS4012D FS4016D
CURRENT RATING
Amps Amps Amps
WIRE SIZE
REF.
0.858 [21.79] 0.858 [21.79] 0.858 [21.79]
0.219 [5.56] 0.143 [3.63] 0.100 [2.54]
0.188 [4.78] 0.112 [2.84] 0.069 [1.75]
PART NUMBER
MS4008D MS4012D MS4016D
CURRENT RATING
Amps Amps Amps
WIRE SIZE
REF.
0.868 [22.05] 0.868 [22.05] 0.868 [22.05]
0.219 [5.56] 0.143 [3.63] 0.100 [2.54]
0.188 [4.78] 0.112 [2.84] 0.069 [1.75]
Material High conductivity copper alloy. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available adding suffix part number. *Note: Female contacts feature Large Surface Area (L.S.A.) closed entry contact design which provides maximum mating surfaces between male female contact reduced contact resistance during operation.
9509-0-0-0 Power Contact Hand Crimp Tool with *C4010D, *C4012D *C4016D Contacts 9504-19-0-0 Power Contact Hand Crimp Tool with *C4008D Contacts [tool shown] 4311-0-0-0 Power Contact Removal Tool
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
SIZE REMOVABLE CONTACTS, POWER, SHIELDED HIGH VOLTAGE
CBD, CBM, SERIES
Positronic Industries, Inc. www.connectpositronic.com
REMOVABLE CRIMP POWER CONTACTS
Crimp power contacts supplied kitted with connector ordered separately.
*FEMALE CLOSED ENTRY, L.S.A.
MALE
0.354 [8.99]
0.354 [8.99]
PART NUMBER
FC4008D FC4010D FC4012D FC4016D
CURRENT RATING
Amps Amps Amps Amps
WIRE SIZE
0.858 [21.79] 0.858 [21.79] 0.858 [21.79] 0.858 [21.79]
0.181 [4.60] 0.122 [3.10] 0.101 [2.57] 0.067 [1.70]
MAX.
0.640 [16.26] 0.640 [16.26] 0.640 [16.26] 0.640 [16.26]
PART NUMBER
MC4008D MC4010D MC4012D MC4016D
CURRENT RATING
Amps Amps Amps Amps
WIRE SIZE
0.882 [22.40] 0.882 [22.40] 0.882 [22.40] 0.882 [22.40]
0.181 [4.60] 0.122 [3.10] 0.101 [2.57] 0.067 [1.70]
MAX.
0.640 [16.26] 0.640 [16.26] 0.640 [16.26] 0.640 [16.26]
Material High conductivity copper alloy. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available adding suffix part number. *Note: Female contacts feature Large Surface Area (L.S.A.) closed entry contact design which provides maximum mating surfaces between male female contact reduced contact resistance during operation.
REELS AUTOMATIC FEED PNEUMATIC CRIMP TOOLS
Contacts supplied plastic carriers, packaged reels holding 1,000 contacts with automatic feed pneumatic crimp tools, catalog part number 9555-0-2. same type carrier used both male female contacts. male female crimp contacts ordered reels adding letter after contact part number, such MC4008DR male contact FC4008DR female contact.
Enlarged section plastic contact carriers
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SIZE CONTACTS
0.142 [3.61]
SIZE REMOVABLE CONTACTS, POWER, SHIELDED HIGH VOLTAGE
Positronic Industries, Inc. www.connectpositronic.com CBD, CBM, SERIES
Combo-D Sub-D
SIZE CONTACTS SHIELDED CONTACTS TECHNICAL CHARACTERISTICS
MATERIALS FINISHES:
Insulating Material: Inner Contacts: [Dielectric] PTFE, Teflon Brass Phosphor bronze, 0.000030 inch [0.8 microns] gold over nickel 0.000050 [1.27µ] gold over nickel. Brass Phosphor bronze, gold flash over nickel.
MECHANICAL CHARACTERISTICS:
Removable Contacts: Durability: Vibration: Shock: Rear insertion, front release. cycles minimum. from 30g-11
Contact Body:
CLIMATIC CHARACTERISTICS: ELECTRICAL CHARACTERISTICS:
Initial Contact Resistance: 0.008 ohms maximum. Nominal Impedance: ohms. -0.46 Insertion Loss: -1.5 VSWR: 1.15 average 1.56 average Proof Voltage: 1000 r.m.s.
Above values measured using frequency domain techniques.
Temperature Range:
-55°C +125°C.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
SIZE REMOVABLE CONTACTS, POWER, SHIELDED HIGH VOLTAGE
CBD, CBM, SERIES
Positronic Industries, Inc. www.connectpositronic.com
REMOVABLE SHIELDED CONTACTS
Shielded contacts supplied kitted with connector ordered separately.
STRAIGHT SOLDER/CRIMP CONTACTS
FEMALE CONTACT
0.040 [1.02]
0.152 [3.86]
MALE CONTACT
STRAIGHT SOLDER/SOLDER CONTACTS
FEMALE CONTACT
0.040 [1.02]
0.152 [3.86]
MALE CONTACT
STRAIGHT CRIMP/CRIMP CONTACTS
FEMALE CONTACT
0.040 [1.02]
0.152 [3.86]
MALE CONTACT
TYPE CONTACT
SOLDER/CRIMP SOLDER/CRIMP SOLDER/CRIMP SOLDER/CRIMP SOLDER/SOLDER SOLDER/SOLDER SOLDER/SOLDER SOLDER/SOLDER CRIMP/CRIMP CRIMP/CRIMP CRIMP/CRIMP CRIMP/CRIMP
PART NUMBER MALE
MC4101D MC4102D MC4103D MC4104D MS4101D MS4102D MS4103D MS4104D MCC4101D MCC4102D MCC4103D MCC4104D
FEMALE
FC4101D FC4102D FC4103D FC4104D FS4101D FS4102D FS4103D FS4104D FCC4101D FCC4102D FCC4103D FCC4104D
0.929 [23.60] 0.929 [23.60] 1.037 [26.34] 1.037 [26.34] 0.929 [23.60] 0.929 [23.60] 1.037 [26.34] 1.037 [26.34] 0.929 [23.60] 0.929 [23.60] 1.037 [26.34] 1.037 [26.34]
0.040 [1.02] 0.067 [1.70] 0.108 [2.74] 0.120 [3.05] 0.040 [1.02] 0.067 [1.70] 0.108 [2.74] 0.120 [3.05] 0.040 [1.02] 0.067 [1.70] 0.108 [2.74] 0.120 [3.05]
MAX.
0.739 [18.77] 0.739 [18.77] 0.847 [21.51] 0.847 [21.51] 0.739 [18.77] 0.739 [18.77] 0.847 [21.51] 0.847 [21.51] 0.739 [18.77] 0.739 [18.77] 0.847 [21.51] 0.847 [21.51]
CABLE NUMBER
Material- Copper alloy with PTFE teflon insulator. Plating: Signal contact 0.000030 [0.75µ] gold over nickel Contact body -Gold flash over nickel. Signal contact 0.000050 [1.27µ] gold over nickel Contact body 0.000030 [0.75µ] gold over nickel available adding suffix part number. Two-step crimping action signal shielding conductors. page crimp tool crimping information.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SIZE CONTACTS
SIZE REMOVABLE CONTACTS, POWER, SHIELDED HIGH VOLTAGE
Positronic Industries, Inc. www.connectpositronic.com CBD, CBM, SERIES
Combo-D Sub-D
SOLDERING CRIMPING INFORMATION COMBINATION SERIES COAXIAL CONTACTS
STEP STRIP WIRE INDICATED LENGTH
SIZE CONTACTS
Insulation Braid Dielectric Center conductor
Shielded Contact Hand Crimp Tool
Chart below Crimp Tool Part Numbers.
PART NUMBER TAKE CARE -Damage remove strands. -Untwist overtwist strands. -Leave insulation particles strands. -Damage insulation.
C4101D S4101D C4102D S4102D C4103D
CABLE NUMBER
0.281 [7.14] 0.281 [7.14] 0.375 [9.53] 0.375 [9.53] 0.281 [7.14] 0.281 [7.14] 0.375 [9.53] 0.375 [9.53]
0.250 [6.35] 0.250 [6.35] 0.312 [7.92] 0.312 [7.92] 0.250 [6.35] 0.250 [6.35] 0.312 [7.92] 0.312 [7.92]
0.078 [1.98] 0.078 [1.98] 0.078 [1.98] 0.078 [1.98] 0.120 [3.05] 0.120 [3.05] 0.120 [3.05] 0.120 [3.05]
CRIMP TOOL
9504-0-0-0 NONE 9504-0-0-0 NONE 9504-0-0-0 NONE 9504-0-0-0 NONE 9504-14-0-0
STEP SOLDER WIRE CONTACT
-Trim cable. center conductor. -Slide ferrule over jacket. Insert dielectric center conductor into barrel. Solder center conductor into contact. -Butt ferrule against shoulder. Solder cable barrel through hole ferrule. Solder into body.
S4103D C4104D S4104D CC4101D
CC4102D
9504-13-0-0
STEP SOLDER/CRIMP WIRE CONTACT
-Trim cable. center conductor. -Slide ferrule over jacket. Insert dielectric center conductor into barrel. Solder center conductor into contact. -Butt ferrule against shoulder. Crimp ferrule over braid. Solder into body.
CC4103D
9504-15-0-0
CC4104D
9504-15-0-0
Contact gender designated male contacts female contacts.
Ferrule Ferrule
STEP CRIMP WIRE CONTACT
-Trim cable. -Slide ferrule over jacket. Insert dielectric center conductor into barrel. Crimp center conductor into contact. -Butt ferrule against shoulder. Crimp ferrule over braid.
Solder
Solder crimp
Jacket Barrel
Jacket Barrel
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
SIZE REMOVABLE CONTACTS, POWER, SHIELDED HIGH VOLTAGE
CBD, CBM, SERIES
Positronic Industries, Inc. www.connectpositronic.com
REMOVABLE HIGH VOLTAGE CONTACTS
High voltage contacts supplied with connectors must ordered separately.
STRAIGHT SOLDER WIRE TERMINATION
Max. 0.734 [18.64] Ref. 0.734 [18.64] Ref. Max.
MS4820D 0.485 [12.32] 0.142 [3.61]
FS4820D 0.040 [1.02]
MALE
FEMALE
SOLDER WIRE TERMINATION
Max. 0.697 [17.70] Ref. Max. 0.697 [17.70] Ref.
MS4920D 0.448 [11.38] 0.142 [3.61]
FS4920D 0.040 [1.02]
MALE
FEMALE
TECHNICAL CHARACTERISTICS
MATERIALS FINISHES:
Insulators: Contacts: Plating: Teflon, PTFE. Male contacts, brass. Female contacts, phosphor bronze. 0.000030 [0.75µ] gold over nickel, 0.000050 [1.27µ] gold over nickel available adding suffix part number.
MECHANICAL CHARACTERISTICS:
Size Removable Contacts: Durability: Vibration: Shock: Rear insertion, front release. cycles minimum. from 30g-11ms.
ELECTRICAL CHARACTERISTICS:
HIGH VOLTAGE CONTACTS Flash Over Voltage: 3600 r.m.s. Proof Voltage: 2700 r.m.s. Initial Contact Resistance: 0.008 ohms maximum.
CLIMATIC CHARACTERISTICS:
Temperature Range: -55°C +125°C.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SIZE CONTACTS
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Combo-D Sub-D
Size Signal Thermocouple Contacts, Crimp Removable Military/Industrial Quality Connectors D.E.S.C. 85039
U.L. Recognized File #E49351 Recognized File #LR54219
807-3 Telecommunication U.L. File #E140980 Series connectors military/industrial quality rectangular connectors designed sheltered, mildly corrosive environments having wide range temperature, pressure humidity changes. Series connectors offer mixed crimpremovable contact combinations power, shielded, high voltage signal contacts within same connector body. Refer size removable contacts power, shielded, high voltage section, page through technical characteristics. connector variants offered standard shell sizes. wide assortment cable support hoods locking systems available from stock. Series connectors also offer Blind Mating connector system applications requiring connector couplings recessed areas mobile power coupling systems. Series connectors utilize precision machined contacts they meet applicable performance dimensional requirements 807-3, D.E.S.C. 85039 MIL-DTL-24308.
SERIES
*CBC SERIES CONTACT VARIANTS
FACE VIEW MALE REAR VIEW FEMALE
SHELL SIZE
SHELL SIZE
Note: Additional contact variants tooled customer request. 27W2 variant currently available female only.
11W1
SHELL SIZE
13W3
17W2
21W1
SHELL SIZE
21WA4
25W3
27W2
SHELL SIZE
24W7
36W4
43W2
47W1
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Positronic Industries, Inc. www.connectpositronic.com
SERIES TECHNICAL CHARACTERISTICS
MATERIALS FINISHES:
Insulator: Signal Contacts: Glass filled polyester MIL-M-24519, 94V-0, blue color. Male contacts precision machined brass alloy. Female contacts precision machined high tensile copper alloy with stainless steel shroud open entry Robi-D design. page Gold flash over nickel plate gold 0.000050 [1.27µ] over nickel plate. Other finishes available upon request. Precision machined copper alloy male contacts female contacts. Retainers beryllium copper. Gold flash over nickel. Other finishes available upon request. Crimp Contact Terminations: Power Contacts, Removable, Crimp Solder Termination:
MECHANICAL CHARACTERISTICS:
Signal Contacts, Crimp Removable: Size contacts male 0.040 inch [1.02mm] diameter; Female closed entry design with stainless steel shroud open entry Robi-D design. lbs. [40N]. Power, shielded high voltage lbs. [98N] Closed barrel crimp, wire sizes [1.0mm2] through [0.05 mm2] Size contact, male contact 0.142 inch [3.61mm] diameter. Male female contacts have terminations wire sizes 8,12 AWG. table maximum cable sizes contact termination dimensions, page Straight terminations 0.041 inch [1.04mm] minimum hole diameter. Male shells dimpled EMI/ESD ground paths. Trapezoidally shaped shells polarized jackscrews. Jackscrews. Series, operations, open entry contact, 1000 operations, closed entry contact with 0.000050 [1.27µ] gold plating. 512-5.
Contact Retention Insulator:
Thermocouple Contacts: Signal Contact Plating:
Power, Shielded High Voltage Contacts:
Power Contact Plating:
Shells:
Steel brass with plate; zinc with dichromate seal, stainless steel passivated. Other materials finishes available upon request. Nylon plastic, brass with plate; zinc with dichromate seal. Steel with zinc dichromate seal, clear zinc plate. Composite plastic UL94V-0, brass steel with zinc plate dichromate seal.
Polarization: Locking Systems: Mechanical Operations, Signal Contacts:
Mounting Spacers Brackets: Jackscrew Systems: Hoods:
CLIMATIC CHARACTERISTICS:
Temperature Range: Damp Heat, Steady State: -55°C +125°C. days.
ELECTRICAL CHARACTERISTICS:
SIGNAL CONTACTS
Contact Current Rating: amperes nominal. Initial Contact Resistance: 0.008 ohms maximum. Proof Voltage: 1000 r.m.s.
POWER CONTACTS
Contact Current Rating: amperes nominal. Initial Contact Resistance: 0.0005 ohms max. 512-2, test Proof Voltage: 1000 r.m.s.
SHIELDED CONTACTS
Initial Contact Resistance: 0.008 ohms maximum. Nominal Impedance: ohms. Insertion Loss: -0.46 -1.5 VSWR: 1.15 average 1.56 average Above values measured using frequency domain techniques. Proof Voltage: 1000 r.m.s. HIGH VOLTAGE CONTACTS Flash over Voltage: 3600 r.m.s. Proof Voltage: 2700 r.m.s. Initial Contact Resistance: 0.008 ohms maximum. CONNECTOR Insulator Resistance: ohms. Clearance Creepage Distance: 0.039 inch [1.0mm] minimum. Working Voltage: r.m.s.
CBC11W1M10Z00 WITH MS4012D CONTACT
CBC11W1F100T20 WITH FS4012D CONTACT
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SERIES
Shielded High Voltage Contact Plating: Signal contact plating, gold 0.000030 inch [0.75 microns] over nickel. Shielded body plating, gold flash over nickel. Other finishes available upon request.
Shielded Contacts, Removable: High Voltage Contacts: Shells:
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Combo-D Sub-D
CBC7W2F00000
CBC17W2M00000
STANDARD SHELL ASSEMBLY
TYPICAL CONNECTOR VIEW
0.375 [9.53] Max. 0.220 [5.59] Max. 0.036±0.008 [0.91±0.020]
page Optional Shell Assemblies
SERIES
0.050±0.010 [1.27±0.025]
0.220 [5.59] Max. 0.375 [9.53] Max.
Mounting hole, places
SHELL SIZES
SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE SHELL SIZE MALE SHELL SIZE FEMALE
±0.015 [0.38]
1.213 [30.81] 1.213 [30.81] 1.541 [39.14] 1.541 [39.14] 2.088 [53.04] 2.088 [53.04] 2.729 [69.32] 2.729 [69.32] 2.635 [66.93] 2.635 [66.93] 2.729 [69.32] 2.729 [69.32]
±0.005 [0.13]
±0.005 [0.13]
0.666 [16.92]
±0.005 [0.13]
0.984 [24.99] 0.984 [24.99] 1.312 [33.32] 1.312 [33.32] 1.852 [47.04] 1.852 [47.04] 2.500 [63.50] 2.500 [63.50] 2.406 [61.11] 2.406 [61.11] 2.500 [63.50] 2.500 [63.50]
±0.005 [0.13]
±0.005 [0.13]
0.329 [8.36]
±0.015 [0.38]
0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.494 [12.55] 0.605 [15.37] 0.605 [15.37] 0.668 [16.97] 0.668 [16.97]
±0.010 [0.25]
0.759 [19.28] 0.759 [19.28] 1.083 [27.51] 1.083 [27.51] 1.625 [41.28] 1.625 [41.28] 2.272 [57.71] 2.272 [57.71] 2.178 [55.32] 2.178 [55.32] 2.302 [58.47] 2.302 [58.47]
±0.010 [0.25]
0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.422 [10.72] 0.534 [13.56] 0.534 [13.56] 0.596 [15.14] 0.596 [15.14]
±0.005 [0.13]
0.233 [5.92] 0.243 [6.17] 0.233 [5.92] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17] 0.230 [5.84] 0.243 [6.17]
±0.010 [0.25]
0.422 [10.72] 0.429 [10.90] 0.422 [10.72] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90] 0.426 [10.82] 0.429 [10.90]
0.643 [16.33] 0.994 [25.25] 0.971 [24.66] 1.534 [38.96] 1.511 [38.38] 2.182 [55.42] 2.159 [54.84] 2.079 [52.81] 2.064 [52.43] 2.212 [56.18] 2.189 [55.60]
0.311 [7.90] 0.329 [8.36] 0.311 [7.90] 0.329 [8.36] 0.311 [7.90] 0.329 [8.36] 0.311 [7.90] 0.441 [11.20] 0.423 [10.74] 0.503 [12.78] 0.485 [12.32]
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Positronic Industries, Inc. www.connectpositronic.com
SIGNAL CRIMP REMOVABLE CONTACTS
CLOSED CRIMP BARREL
Crimp contacts supplied kitted with connector ordered separately.
FEMALE CONTACT "CLOSED ENTRY" DESIGN
*Color Code [1.02] Stainless Steel Shroud
MALE CONTACT
*Color Code
0.170 [4.32]
0.170 [4.32]
Material Leaded nickel copper. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available adding suffix part number. *Color Code ORANGE/BLUE/GRAY military specification contacts. PART NUMBER
FC6020D FC6026D *M39029/63-368
Material Brass. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available adding suffix part number. *Color Code ORANGE/BLUE/WHITE military specification contacts.
0.066 [1.68] 0.066 [1.68] 0.066 [1.68]
[0.5/0.3/0.25] [0.12/0.08/0.05] [0.5/0.3/0.25]
0.538 [13.67] 0.538 [13.67] 0.538 [13.67]
0.045 [1.14] 0.027 [0.69] 0.045 [1.14]
MC6020D MC6026D *M39029/64-369
[0.5/0.3/0.25] [0.12/0.08/0.05] [0.5/0.3/0.25]
0.550 [13.97] 0.550 [13.97] 0.550 [13.97]
0.045 [1.14] 0.027 [0.69] 0.045 [1.14]
0.066 [1.68] 0.066 [1.68] 0.066 [1.68]
page crimp tool information.
FEMALE CONTACT "Robi-D Open Entry" DESIGN
20/22/24 [0.5/0.3/0.25 mm2]
PART NUMBER
0.170 [4.32]
FC6520D
WIRE SIZE AWG/[mm2]
[0.5/0.3/0.25]
0.538 [13.67]
0.045 [1.14]
0.066 [1.68]
Material Phosphor bronze. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available suffix part number.
REELS AUTOMATIC FEED PNEUMATIC CRIMP TOOLS
Contacts supplied plastic carriers, packaged reels holding 2,000 contacts with automatic feed pneumatic crimp tools, catalog part number 9550-1-0. same type carrier used both male female contacts. male female crimp contacts ordered reels adding letter after contact part number, such MC6020DR male contact FC6026DR female contact. Enlarged section plastic contact carriers
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SERIES
WIRE SIZE AWG/[mm2]
PART NUMBER
WIRE SIZE AWG/[mm2]
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Combo-D Sub-D
SIGNAL CRIMP REMOVABLE CONTACTS
[1.0mm2] max.
FEMALE CONTACT "CLOSED ENTRY" DESIGN
0.916 [23.26] [2.18]
MALE CONTACT
0.927 [23.55]
[2.18]
[1.40]
0.170 [4.32]
Stainless Steel Shroud
[1.02]
0.170 [4.32]
[1.40]
Part Number: FC6018D
Material Phosphor bronze. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available suffix part number.
Part Number: MC6018D
Material Brass. Plating Gold flash over nickel. 0.000030 [0.75µ] gold over nickel available adding suffix part number. 0.000050 [1.27µ] gold over nickel available suffix part number.
crimping information, page
SERIES
crimping information, page
THERMOCOUPLE CONTACTS
MALE CONTACT
0.550 [13.97] [1.68] *Color Code [1.02]
FEMALE CONTACT
0.538 [13.67] *Color Code [1.14]
[1.14]
0.170 [4.32]
0.170 [4.32]
[1.68]
TYPE
MATERIAL Chromel® Alumel®(-) Copper Constantan Chromel® Constantan
MALE PART NUMBER MC6020DCH MC6020DAL MC6020DCU MC6020DCO MC6020DCH MC6020DCO
FEMALE PART NUMBER FC6020DCH FC6020DAL FC6020DCU FC6020DCO FC6020DCH FC6020DCO
COLOR CODE White Green Yellow White Yellow
WIRE SIZE [mm2] [0.5 0.25] [0.5 0.25] [0.5 0.25] [0.5 0.25] [0.5 0.25] [0.5 0.25]
Dimensionally equivalent M39029/64-369 Dimensionally equivalent M39029/63-368
Chromel Alumel registered trademarks Hoskins Manufacturing Company.
more information availability Type thermocouple contacts, information about thermocouple contacts with solder termination, please contact Technical Sales.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Positronic Industries, Inc. www.connectpositronic.com
CRIMPING INFORMATION SERIES CRIMP SIGNAL CONTACTS
INDICATED POSITRONIC TOOLS BEST RESULTS
Step Strip wire indicated length
Insulation ±0.020 0.160 [4.06]
Take care Stranded wire
Damage remove strands Untwist overtwist strands Leave insulation particles strands Damage insulation
Correctly stripped wire
Strands damaged removed stripping tool
Strands overtwisted
Insulation incorrectly
Particles insulation stripped part wire
Strands untwisted
Wire insulation damaged
Examples stripping faults Step Crimp wire contact
hand crimp tool: Place contact into crimping tool Insert wire into contact Center contact slowly closing crimping tool until crimp indenters make contact with crimp barrel Complete cycle crimping tool smooth motion Remove crimped contact
automatic feed pneumatic crimp tool: Insert wire into contact, positioned crimp tool plastic carrier Depress activating devise crimping tool start crimping cycle Remove crimped contact
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Combo-D Sub-D
CRIMPING INFORMATION SERIES CRIMP SIGNAL CONTACTS
Step Inspect crimp
tools: Strands visible through inspection hole Strands visible beyond insulation support Crimped contact meet recommended conductor tensile force shown chart Check peeled gold bent contact
Crimp meet recommended tensile strength
Correctly crimped contact
Wire insulation, Typ.
Cross section correctly crimped contact
Stripped wires compressed improved conduction Strands visible beyond insulation support Strands visible through inspection hole
crimp indents
SERIES
Positronic Recommended Conductor Tensile Strength WIRE SIZE AWG/[mm2]
18AWG [1.0mm2] 20AWG [0.5mm2] 22AWG [0.3mm2] 24AWG [0.25mm2] 26AWG [0.12mm2] 28AWG [0.08mm2] 30AWG [0.05mm2] Stripped part wire long Stripped part wire short
Crimp indents close inspection hole
Crimp indents incorrectly located
AXIAL LOAD POUNDS/[N]
lbs. [125 lbs. lbs. lbs. lbs. lbs. lbs. [6.7
Examples crimping faults
POSITRONIC RECOMMENDED TOOLS SIGNAL CONTACTS more information crimp tools accessories page. POSITIONERS FC6018D, MC6018D
9502-11-0-0
CRIMP TOOLS
POSITIONERS FC6020D, FC6026D, MC6020D, MC6026D, M39029/63-368, M39029/64-369
9502-5-0-0
9507-0-0-0 HAND CRIMP TOOL 9550-1-0 AUTOMATIC FEED PNEUMATIC STRIP CRIMP TOOL
Conductor tensile strength values derived using silver-tin plated copper wires. Values change depending upon what type wire used.
Supplied reels
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Positronic Industries, Inc. www.connectpositronic.com
AUTOMATIC FEED, STRIP CRIMP TOOLS, PNEUMATICALLY ACTUATED
Part 9550-1-0 This fast cycling automatic feed strip crimp tool produces indent crimp wire sizes [1.0mm2] through [0.03mm2]. Series contacts must ordered reels. order, specify part number 9550-1-0. Foot control valve supplied standard accessory.
MINIATURE STEP ADJUSTABLE TOOL (M22520/2-01)
Part 9507-0-0-0 This miniature step adjustable hand crimping tool produces indent crimp configuration will crimp wire sizes [1.0mm2] through [0.03mm2]. crimp wire size [1.0mm2], order contact positioner 9502-11-0-0. crimp wire size [0.5mm2] through [0.05mm2] order contact positioner 9502-5-0-0. Each positioner equipped with data plate which gives correct crimp-depth setting each wire size, must used with 9507-0-0-0 tool frame best results when crimping Series contacts.
INSERTION/REMOVAL TOOL (M81969/1-02)
Part 4711-2-0-0 Part 9555-0-2 This fast cycling automatic feed strip crimp tool produces indent crimp wire sizes [10.0mm2] through [4.0mm2]. Contacts must ordered reels. order, specify part number 9555-0-2. Foot control valve supplied standard accessory. this tool used insert contacts into Series connectors. other used extract contacts. This accomplished sliding extraction down wire into connector until bottoms against contact. slight rotation while pushing will release contacts, which then extracted simultaneously pulling wire.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
SERIES
INDUSTRIAL MILITARY QUALITY SUBMINIATURE-D CONNECTORS
Positronic Industries, Inc. www.connectpositronic.com MILITARY SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP REMOVABLE CONTACT SERIES
Combo-D Sub-D
ORDERING INFORMATION CODE NUMBERING SYSTEM
Specify Complete Connector Following Steps Through Insert When Step Used
STEP
STEP Basic Series
Series.
*STEP Special Options
Consult Sales Department 759.0 Blind Mate Pilot 759.1 Blind Mate Panel
STEP Connector Variants
Shell Size Shell Size 7W2, 11W1 Shell Size 9W4, 13W3, 17W2, 21W1 Shell Size 21WA4, 25W3, 27W2***
STEP Shell Options
Zinc Plated with Dichromate Seal Stainless Steel Plated Plated Dimpled-male connector only
*STEP Locking Polarizing Systems
None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male Female Polarized Jackscrews.
SERIES
Shell Size 24W7, 36W4, 43W2, 47W1
STEP Connector Gender
Male Female
STEP Type Contacts
Connector ordered without contacts. Order Signal, Power, Shielded High Voltage contacts separately. pages contact part numbers. Kitted contacts supplied sealed bags. Signal contacts, AWG-24 [0.5mm2-0.25mm2]. Signal contacts, AWG-24 [0.5mm2-0.25mm2] with MC/FC 4012D Power Contact. Signal contacts, AWG-24 [0.5mm2-0.25mm2] with MC/FC 4016D power contact. Signal contacts, AWG-24 [0.5mm2-0.25mm2] with MCC/FCC 4101D shielded contacts. Signal contacts, AWG-24 [0.5mm2-0.25mm2] with MCC/FCC 4102D shielded contacts.
*STEP Hoods
None Hood, Opening, Metal, shell sizes through Hood, EMI/RFI, Metal, shell sizes through Hood, Side Opening, robust extended height, plastic composite, with rotating jackscrews, shell sizes through
additional information accessories listed steps Accessory Catalog. When using hood with variants, extended height hood. Accessories Catalog extended hood options. Connector variant 27W2 currently available female only
*STEP Mounting Style
Mounting Hole, 0.120 [3.05] Mounting Hole, 0.154 [3.91] Float Mounts, Universal Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length Swaged Locknut, 4-40 Threads
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
PROFESSIONAL QUALITY PRINTED BOARD MOUNT COMBINATION POWER SIGNAL CONTACT DUAL PORT VERTICALLY STACKED CONNECTOR ASSEMBLY
SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
Power Signal Contacts
U.L. Recognized File #E49351 Recognized File #LR54219 Telecommunication U.L. File #14095
Combo-Dual Port connector series offers several combinations power signal contacts within same connector assembly. Fifteen different combinations power signal contact stacked assemblies available within four standard shell sizes. connector assembly partially populated with either signal power contacts installed connector bodies customer selected contact positions. stacked connectors spaced apart dimensional spacings. special order, printed board mount ampere contacts replaced with size power, shielded high voltage contacts
having crimp solder terminations. Signal contacts remain dual port configuration. Mounting angle brackets ordered riveted connector specifying options. Locking systems available utilizing 4-40 threaded jackscrew systems, polarized non-polarized, with quick-release vibration lock system either front rear panel mounted connectors. Combo-Dual Port Series connectors comply with dimensional requirements 807-2 DESC 85039.
COMBO-DUAL PORT TECHNICAL CHARACTERISTICS
MATERIALS FINISHES:
Polyester, glass filled MIL-M-24519, 94V-0, blue color. Signal Contacts: Male contacts-precision machined copper alloy. Female contacts-precision machined high tensile phosphor bronze. Signal Contact Plating: Gold flash over nickel plate. Other finishes available upon request. Power Contacts: Male contacts-precision machined copper alloy. Female contacts-precision machined high tensile copper alloy. Power Contact Plating: Gold flash over nickel. Other finishes available upon request. Shells: Steel brass with plate zinc plate with dichromate seal. Other materials finishes available upon request. Mounting Spacers Steel brass with plate zinc with Brackets: dichromate seal. Cross Bar: Nylon, 94V-0, black color. Push-On Fasteners: Beryllium copper, plated. Jackscrew Systems: Steel with clear zinc plate zinc plate with dichromate seal. Vibration Lock Systems: Lock tabs, steel with nickel plate. Insulator:
MECHANICAL CHARACTERISTICS:
Signal Contacts: Size male contacts-0.040 inch [1.0mm] diameter. Female contactrugged open entry design. lbs. [40N] Printed board mount with terminations supported alignment bar. Termination diameter 0.028 inch [0.71mm]. Size male contact-0.142 inch [3.61mm] diameter. Female contactopen entry closed entry options. lbs. [92N] Printed board mount with terminations 0.078 inch [1.98mm] diameter. Size removable solder contacts with wire hole diameters 0.188 inch [4.78mm], 0.112 inch [2.84mm] 0.069 inch [1.75mm]. Male connector shells dimpled EMI/ESD ground paths. Trapezoidally shaped shells polarized jackscrews. Riveted fasteners with 0.120 inch [3.05mm] diameter clearance hole, with 4-40 threads 4-40 threads with nylon lock insert. Rapid installation push-on fasteners. Jackscrews vibration locking system either front rear panel mounted connectors. operations minimum 512-5. -55°C +125°C. days.
Contact Retention Insulator: Contact Terminations:
Power Contacts:
Shells: Polarization: Mounting Bracket Riveted Connector:
ELECTRICAL CHARACTERISTICS:
Signal Contacts:
Initial Contact Resistance: Power Contacts: amperes nominal. 0.008 ohms maximum. ampere nominal board mount. ampere nominal removable contacts with solder crimp terminations. 0.0005 ohms max. 512-2, test 1000 r.m.s. ohms. 0.039 inch [1.0mm] r.m.s.
Mounting Printed Board: Locking Systems:
Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance Creepage Distance (minimum): Working Voltage:
Mechanical Operations: Temperature Range: Damp Heat, Steady State:
CLIMATIC CHARACTERISTICS:
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBDP SERIES
Contact Retention Insulator: Contact Terminations:
PROFESSIONAL QUALITY PRINTED BOARD MOUNT COMBINATION POWER SIGNAL CONTACT DUAL PORT VERTICALLY STACKED CONNECTOR ASSEMBLY
Positronic Industries, Inc. www.connectpositronic.com SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Combo-D Sub-D
CONTACT VARIANTS
FACE VIEW MALE REAR VIEW FEMALE
SHELL SIZE
SHELL SIZE
3WK3*
11W1
SHELL SIZE
13W3
17W2
21W1
SHELL SIZE
13W6
17W5
21WA4
25W3
27W2
*3WK3: variant contains male contacts female contact variant contains female contacts male contact
PRINTED BOARD MOUNT CONNECTOR
CONNECTOR UNIT, 0.283 [7.19] CONTACT EXTENSION
AMPERE MAXIMUM RATED POWER CONTACTS
±0.008 0.036 [0.91] 0.220 [5.59] MAX.
4-40 THDS. TYP. 0.247 [6.27]
Note: ampere 0.125 [3.18] power contacts ordered special request limited number CBDP variants. Contact factory details.
CBDP SERIES
0.170 [4.32] ±0.003 0.028 TYP. [0.71] ±0.010 0.270 [6.86]
0.494 [12.55] ±0.003 0.078 TYP. [1.98]
0.283 [7.19] TYP. 0.112 [2.84] TYP.
0.112 [2.84] TYP.
0.150 [3.81] TYP.
0.745 [18.92] ±0.010 0.580 [14.73]
TYPICAL PART NUMBER: CBDPB7W2MN8T2/7W2MN8T6X
CONNECTOR VARIANT
SHELL SIZE
1.213 [30.81] 1.541 [39.14] 2.088 [53.04] 2.729 [69.32]
0.984 [24.99] 1.312 [33.32] 1.852 [47.04] 2.500 [63.50]
CONNECTOR DESIGNATION
CBDPB CBDPC
0.750 [19.05] 0.900 [22.86]
1.244 [31.60] 1.394 [35.41]
SHELL SIZE 0.256 [6.50] 0.406 [10.31] SHELL SIZE SHELL SIZE
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Note: Printed board power contacts (size replaced with size removable power, shielded high voltage contact having solder crimp terminations.
Combo-D Sub-D
PROFESSIONAL QUALITY PRINTED BOARD MOUNT COMBINATION POWER SIGNAL CONTACT DUAL PORT VERTICALLY STACKED CONNECTOR ASSEMBLY
SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
PRINTED BOARD CONTACT HOLE PATTERN
Hole identification shown female connector over male connector. Mount connector with mating face positioned follow direction arrow.
0.112 [2.84] 0.035 [0.89] 0.310 [7.87] 0.013 [0.33] 0.162 [4.11] 0.218 [5.54] 0.492 [12.50] 0.056 [1.42] 0.310 [7.87]
0.262 [6.65] 0.069 [1.75] 0.310 [7.87] 0.270 [6.86] 0.656 [16.66] 0.013 [0.33] 0.656 [16.66] 0.035 [0.89]
0.112 [2.84] 0.056 [1.42]
0.054 [1.37] 0.108 [2.74] 0.270 [6.86]
5W1/5W1
0.112 [2.84] 0.035 [0.89] 0.310 [7.87] 0.013 [0.33] 0.656 [16.66] 0.108 [2.74] 0.162 [4.11] 0.216 [5.49] 0.056 [1.42]
3W3/3W3 3WK3/3WK3
7W2/7W2
0.262 [6.65] 0.069 [1.75] 0.310 [7.87] 0.034 [0.86] 0.268 [6.81] 0.570 [14.48] 0.926 [23.52]
11W1/11W1
0.112 [2.84] 0.035 [0.89] 0.310 [7.87] 0.013 [0.33] 0.108 [2.74] 0.162 [4.11] 0.306 [7.77] 0.570 [14.48] 0.926 [23.52] 0.056 [1.42] 0.310 [7.87] 0.013 [0.33] 0.035 [0.89]
5W5/5W5
0.112 [2.84] 0.056 [1.42]
0.054 [1.37] 0.108 [2.74] 0.306 [7.77] 0.570 [14.48] 0.926 [23.52]
9W4/9W4
0.112 [2.84] 0.035 [0.89] 0.310 [7.87] 0.013 [0.33] 0.054 [1.37] 0.109 [2.77] 0.544 [13.82] 0.926 [23.52] 0.056 [1.42] 0.310 [7.87] 0.013 [0.33] 0.035 [0.89]
13W3/13W3
0.112 [2.84] 0.056 [1.42]
0.109 [2.77] 0.163 [4.14] 0.218 [5.54] 0.926 [23.52]
17W2/17W2
21W1/21W1
Suggest 0.045 [1.14] hole signal contact termination positions. Suggest 0.098 [2.49] hole 0.078 [1.98] power contact termination positions. Suggest 0.123 ±0.003 [3.12] hole mounting connector with push-on fasteners. Mounting holes must move 0.020 [0.51] ±0.010 opposite direction arrow unriveted mounting bracket with connectors. DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBDP SERIES
PROFESSIONAL QUALITY PRINTED BOARD MOUNT COMBINATION POWER SIGNAL CONTACT DUAL PORT VERTICALLY STACKED CONNECTOR ASSEMBLY
Positronic Industries, Inc. www.connectpositronic.com SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Combo-D Sub-D
PRINTED BOARD CONTACT HOLE PATTERN
Hole identification shown female connector over male connector. Mount connector with mating face positioned follow direction arrow.
0.112 [2.84] 0.262 [6.65] 0.310 [7.87] 0.150 [3.81] 0.069 [1.75] 0.250 [6.35] TYP. 0.650 [16.51] 0.900 [22.86] 1.250 [31.75] 0.600 [15.24] 0.265 [6.73] 1.250 [31.75] 0.310 [7.87] 0.013 [0.33] 0.109 [2.77] 0.652 [16.56] 0.707 [17.96] 0.092 [2.34] 0.035 [0.89] 0.056 [1.42]
8W8/8W8
13W6/13W6
0.112 [2.84] 0.035 [0.89] 0.310 [7.87] 0.013 [0.33] 0.055 [1.40] 0.109 [2.77] 0.618 [15.70] 1.250 [31.75] 0.275 [6.99] 0.343 [8.71] 0.056 [1.42] 0.310 [7.87] 0.013 [0.33] 0.893 [22.68] 1.250 [31.75] 0.035 [0.89]
0.112 [2.84] 0.056 [1.42]
0.055 [1.40] 0.109 [2.77] 0.618 [15.70]
17W5/17W5
21WA4/21WA4
0.112 [2.84] 0.035 [0.89] 0.310 [7.87] 0.013 [0.33] 0.893 [22.68] 1.250 [31.75] 0.055 [1.40] 0.109 [2.77] 0.618 [15.70] 0.056 [1.42] 0.310 [7.87] 0.013 [0.33] 0.893 [22.68] 1.250 [31.75] 0.035 [0.89]
0.112 [2.84] 0.056 [1.42]
CBDP SERIES
0.055 [1.40] 0.109 [2.77]
27W2/27W2
25W3/25W3
Suggest 0.045 [1.14] hole signal contact termination positions. Suggest 0.098 [2.49] hole 0.078 [1.98] power contact termination positions. Suggest 0.123 ±0.003 [3.12] hole mounting connector with push-on fasteners. Mounting holes must move 0.020 [0.51] ±0.010 opposite direction arrow unriveted mounting bracket with connectors.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
PROFESSIONAL QUALITY PRINTED BOARD MOUNT COMBINATION POWER SIGNAL CONTACT DUAL PORT VERTICALLY STACKED CONNECTOR ASSEMBLY
SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries, Inc. www.connectpositronic.com
ORDERING INFORMATION CODE NUMBERING SYSTEM
Specify Complete Connector Following Steps Through Insert When Step Used
STEP
CBDPB
Upper Connector
STEP Basic Series
CBDPB Series CBDPC Series
Options same Upper Connector Steps
Lower Connector
STEP Special Options
Consult Sales Department
STEP CBDP Series Connector Variants
Shell Size Shell Size 3W3, 3WK3, 7W2, 11W1 Shell Size 5W5, 9W4, 13W3, 17W2, 21W1 Shell Size 8W8, 13W6, 17W5, 21WA4, 25W3, 27W2
Note: Size removable power contacts with solder crimp terminations with power ratings amperes ordered lieu board mounted power contact. Removable size shielded high voltage contacts also ordered separately lieu power contact. pages through contact part numbers.
STEP Shell Options
Zinc Plated with Dichromate Seal Plated Plated Dimpled male connector only
STEP Connector Gender
Male Female
STEP Locking, Polarizing, Mounting Push-on Fastener Systems
None Bracket, Mounting, Metal, Swaged Connector with 4-40 Thread, Fixed Female Jackscrews Cross Bracket, Mounting, Metal, Swaged Connector with 0.120 [3.05] Mounting Hole with Cross Bracket, Mounting, Metal, Swaged Connector with 4-40 Threads with Cross Bracket, Mounting, Metal, Swaged Connector with 4-40 Locknut with Cross Bracket, Mounting, Metal, Swaged Connector with 4-40 Thread, Fixed Female Jackscrews with Cross Push-On Fastener Bracket, Mounting, Metal, Swaged Connector with 4-40 Threads with Cross Push-on Fastener Bracket, Mounting, Metal, Swaged Connector with 4-40 Threads with Cross Push-on Fastener Bracket, Mounting, Metal, Swaged Connector with 4-40 Locknut with Cross Push-on Fastener Fixed Female Jackscrews Fixed Female Jackscrews Fixed Male Female Polarized Jackscrews
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
CBDP SERIES
DESC CROSS REFERENCE
Positronic Industries, Inc. www.connectpositronic.com
Combo-D Sub-D
Removable contacts were tested shock vibration using connectors holding fixture. Tests were performed connector specifications. DESC PART NUMBER 85040DAEPT 85040DAEST 85040DAEPR 85040DAESR 85040GAEPT 85040GAEST 85040GAEPR 85040GAESR 85040GBEPT 85040GBEST 85040GBEPR 85040GBESR 85040NAEPT 85040NAEST 85040NAEPR 85040NAESR 85040MAEPT 85040MAEST 85040MAEPR 85040MAESR 85041DAEPT 85041DAEST 85041DAEPR 85041DAESR 85041GAEPT 85041GAEST 85041GAEPR 85041GAESR 85041GBEPT 85041GBEST 85041GBEPR 85041GBESR REFERENCE NUMBER* CBC7W2M1F000-50-799.2 CBC7W2F1F000-50-799.2 CBC7W2M10000-50-799.0 CBC7W2F10000-50-799.0 CBC7W2M1F00C-50 CBC7W2F1F00C-50 CBC7W2M1000C-50 CBC7W2F1000C-50 CBM7W2M2F00C-50 CBM7W2F2F00C-50 CBM7W2M2000C-50 CBM7W2F2000C-50 CBC7W2M1F000-50-403.0 CBC7W2F1F000-50-403.0 CBC7W2M10000-50-403.0 CBC7W2F10000-50-403.0 CBC7W2M1F000-50-403.4 CBC7W2F1F000-50-403.4 CBC7W2M10000-50-403.3 CBC7W2F10000-50-403.3 CBC11W1M1F000-50-799.2 CBC11W1F1F000-50-799.2 CBC11W1M10000-50-799.0 CBC11W1F10000-50-799.0 CBC11W1M1F00C-50 CBC11W1F1F00C-50 CBC11W1M1000C-50 CBC11W1F1000C-50 CBM11W1M2F00C-50 CBM11W1F2F00C-50 CBM11W1M2000C-50 CBM11W1F2000C-50 DESC PART NUMBER 85041NAEPT 85041NAEST 85041NAEPR 85041NAESR 85041MAEPT 85041MAEST 85041MAEPR 85041MAESR 85043GULPT 85043GULST 85043GULPR 85043GULSR 85044DAEPT 85044DAEST 85044DAEPR 85044DAESR 85044GAEPT 85044GAEST 85044GAEPR 85044GAESR 85044GBEPT 85044GBEST 85044GBEPR 85044GBESR 85044NAEPT 85044NAEST 85044NAEPR 85044NAESR 85044MAEPT 85044MAEST 85044MAEPR 85044MAESR REFERENCE NUMBER* CBC11W1M1F000-50-403.0 CBC11W1F1F000-50-403.0 CBC11W1M10000-50-403.0 CBC11W1F10000-50-403.0 CBC11W1M1F000-50-403.4 CBC11W1F1F000-50-403.4 CBC11W1M10000-50-403.3 CBC11W1F10000-50-403.3 CBM5W5M0F00C CBM5W5F0F00C CBM5W5M0000C CBM5W5F0000C CBC17W2M1F000-50-799.2 CBC17W2F1F000-50-799.2 CBC17W2M10000-50-799.0 CBC17W2F10000-50-799.0 CBC17W2M1F00C-50 CBC17W2F1F00C-50 CBC17W2M1000C-50 CBC17W2F1000C-50 CBM17W2M2F00C-50 CBM17W2F2F00C-50 CBM17W2M2000C-50 CBM17W2F2000C-50 CBC17W2M1F000-50-403.0 CBC17W2F1F000-50-403.0 CBC17W2M10000-50-403.0 CBC17W2F10000-50-403.0 CBC17W2M1F000-50-403.4 CBC17W2F1F000-50-403.4 CBC17W2M10000-50-403.3 CBC17W2F10000-50-403.3 DESC PART NUMBER 85045DAEPT 85045DAEST 85045DAEPR 85045DAESR 85045GAEPT 85045GAEST 85045GAEPR 85045GAESR 85045GBEPT 85045GBEST 85045GBEPR 85045GBESR 85045NAEPT 85045NAEST 85045NAEPR 85045NAESR 85045MAEPT 85045MAEST 85045MAEPR 85045MAESR 85047GULPT 85047GULST 85047GULPR 85047GULSR 85048GBEPT 85048GBEST 85048GBEPR 85048GBESR 85049 85050 85051 85052 REFERENCE NUMBER* CBC13W3M1F000-50-799.2 CBC13W3F1F000-50-799.2 CBC13W3M10000-50-799.0 CBC13W3F10000-50-799.0 CBC13W3M1F00C-50 CBC13W3F1F00C-50 CBC13W3M1000C-50 CBC13W3F1000C-50 CBM13W3M2F00C-50 CBM13W3F2F00C-50 CBM13W3M2000C-50 CBM13W3F2000C-50 CBC13W3M1F000-50-403.0 CBC13W3F1F000-50-403.0 CBC13W3M10000-50-403.0 CBC13W3F10000-50-403.0 CBC13W3M1F000-50-403.4 CBC13W3F1F000-50-403.4 CBC13W3M10000-50-403.3 CBC13W3F10000-50-403.3 CBM8W8M0F00C CBM8W8F0F00C CBM8W8M0000C CBM8W8F0000C CBM21WA4M2F00C-50 CBM21WA4F2F00C-50 CBM21WA4M2000C-50 CBM21WA4F2000C-50 OFFERED OFFERED OFFERED OFFERED
DESC CROSS REF.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
Combo-D Sub-D
DESC CROSS REFERENCE
Positronic Industries, Inc. www.connectpositronic.com
Removable contacts were tested shock vibration using connectors holding fixture. Tests were performed connector specifications. DESC PART NUMBER 85053 85054GBEPT 85054GBEST 85054GBEPR 85054GBESR 89046-001 89047-001 89048-001 89049-001 89050-001 89051-001 89052-001 89053-001 89054-001 89055-001 89056-001 89057-001 89058-A 89058-B 89058-C 89058-D 89059-A 89059-B 89059-C 89059-D 89060-A 89060-B 89060-C 89060-D 89061-A 89061-B 89061-C REFERENCE NUMBER* OFFERED CBM24W7M2F00C-50 CBM24W7F2F00C-50 CBM24W7M2000C-50 CBM24W7F2000C-50 MS4016D-50 FS4016D-50 OFFERED OFFERED MS4008D-50 FS4008D-50 OFFERED OFFERED MS4820-50 FS4820-50 FS4920-50 MS4920-50 MC4101M MC4102M MC4103M MC4104M FC4101M FC4102M FC4103M FC4104M MC4201M MC4202M MC4203M MC4204M FC4201M FC4202M FC4203M DESC PART NUMBER 89061-D 89074DAEPT 89074DAEST 89074DAEPR 89074DAESR 89074GAEPT 89074GAEST 89074GAEPR 89074GAESR 89074GBEPT 89074GBEST 89074GBEPR 89074GBESR 89074NAEPT 89074NAEST 89074NAEPR 89074NAESR 89074MAEPT 89074MAEST 89074MAEPR 89074MAESR 89075GULPT 89075GULST 89075GULPR 89075GULSR 89076GBEPT 89076GBEST 89076GBEPR 89076GBESR 89077GBEPT 89077GBEST 89077GBEPR REFERENCE NUMBER* FC4204M CBC5W1M1F000-50-799.2 CBC5W1F1F000-50-799.2 CBC5W1M10000-50-799.0 CBC5W1F10000-50-799.0 CBC5W1M1F00C-50 CBC5W1F1F00C-50 CBC5W1M1000C-50 CBC5W1F1000C-50 CBM5W1M2F00C-50 CBM5W1F2F00C-50 CBM5W1M2000C-50 CBM5W1F2000C-50 CBC5W1M1F000-50-403.0 CBC5W1F1F000-50-403.0 CBC5W1M10000-50-403.0 CBC5W1F10000-50-403.0 CBC5W1M1F000-50-403.4 CBC5W1F1F000-50-403.4 CBC5W1M10000-50-403.3 CBC5W1F10000-50-403.3 CBM3W3M0F00C CBM3W3F0F00C CBM3W3M0000C CBM3W3F0000C CBM9W4M2F00C-50 CBM9W4F2F00C-50 CBM9W4M2000C-50 CBM9W4F2000C-50 CBM21W1M2F00C-50 CBM21W1F2F00C-50 CBM21W1M2000C-50 DESC PART NUMBER 89077GBESR 89078GBEPT 89078GBEST 89078GBEPR 89078GBESR 89079GBEPT 89079GBEST 89079GBEPR 89079GBESR 89080DAEPT 89080DAEST 89080DAEPR 89080DAESR 89080GAEPT 89080GAEST 89080GAEPR 89080GAESR 89080GBEPT 89080GBEST 89080GBEPR 89080GBESR 89080NAEPT 89080NAEST 89080NAEPR 89080NAESR 89080MAEPT 89080MAEST 89080MAEPR 89080MAESR 89081GBEPT 89081GBEST 89081GBEPR REFERENCE NUMBER* CBM21W1F2000C-50 CBM13W6M2F00C-50 CBM13W6F2F00C-50 CBM13W6M2000C-50 CBM13W6F2000C-50 CBM17W5M2F00C-50 CBM17W5F2F00C-50 CBM17W5M2000C-50 CBM17W5F2000C-50 CBC25W3M1F000-50-799.2 CBC25W3F1F000-50-799.2 CBC25W3M10000-50-799.0 CBC25W3F10000-50-799.0 CBC25W3M1F00C-50 CBC25W3F1F00C-50 CBC25W3M1000C-50 CBC25W3F1000C-50 CBM25W3M2F00C-50 CBM25W3F2F00C-50 CBM25W3M2000C-50 CBM25W3F2000C-50 CBC25W3M1F000-50-403.0 CBC25W3F1F000-50-403.0 CBC25W3M10000-50-403.0 CBC25W3F10000-50-403.0 CBC25W3M1F000-50-403.4 CBC25W3F1F000-50-403.4
CBC25W3F10000-50-403.3 CBM27W2M2F00C-50 CBM27W2F2F00C-50 CBM27W2M2000C-50
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
DESC CROSS REF.
CBC25W3M10000-50-403.3
DESC CROSS REFERENCE
Positronic Industries, Inc. www.connectpositronic.com
Combo-D Sub-D
Removable contacts were tested shock vibration using connectors holding fixture. Tests were performed connector specifications. DESC PART NUMBER 89081GBESR 89082GBEPT 89082GBEST 89082GBEPR 89082GBESR 89083DAEPT 89083DAEST 89083DAEPR 89083DAESR 89083GAEPT 89083GAEST 89083GAEPR 89083GAESR 89083GBEPT 89083GBEST 89083GBEPR 89083GBESR 89083NAEPT 89083NAEST 89083NAEPR 89083NAESR 89083MAEPT 89083MAEST 89083MAEPR 89083MAESR REFERENCE NUMBER* CBM27W2F2000C-50 CBM36W4M2F00C-50 CBM36W4F2F00C-50 CBM36W4M2000C-50 CBM36W4F2000C-50 CBC43W2M1F000-50-799.2 CBC43W2F1F000-50-799.2 CBC43W2M10000-50-799.0 CBC43W2F10000-50-799.0 CBC43W2M1F00C-50 CBC43W2F1F00C-50 CBC43W2M1000C-50 CBC43W2F1000C-50 CBM43W2M2F00C-50 CBM43W2F2F00C-50 CBM43W2M2000C-50 CBM43W2F2000C-50 CBC43W2M1F000-50-403.0 CBC43W2F1F000-50-403.0 CBC43W2M10000-50-403.0 CBC43W2F10000-50-403.0 CBC43W2M1F000-50-403.4 CBC43W2F1F000-50-403.4 CBC43W2M10000-50-403.3 CBC43W2F10000-50-403.3 DESC PART NUMBER REFERENCE NUMBER* DESC PART NUMBER REFERENCE NUMBER*
DESC CROSS REF.
DIMENSIONS INCHES [MILLIMETERS]. DIMENSIONS SUBJECT CHANGE.
POSITRONIC INDUSTRIES
Positronic Products
Power
Contact Sizes: Current Ratings: amperes Terminations: Crimp, wire solder, straight solder, right angle solder, straight press-fit right angle press-fit Configurations: Multiple variants variety package sizes Compliance: PICMG 2.11, PICMG 3.0, VITA Contact Sizes: Current Ratings: amperes nominal Terminations: Crimp, wire solder, straight solder, right angle solder straight press-fit Configurations: Multiple variants both standard high densities Qualifications: MIL-DTL-24308, Goddard Space Flight 311P, MILC-39029, IP65, IP67
D-Subminiature
FEATURES: swap capability AC/DC operation single connector Signal contacts hardware management Blind mating Sequential mating Large Surface Area Contact Mating System Wide variety accessories Customer specified contact arrangements
FEATURES: Three performance levels available: professional quality, military quality space-flight quality provide multiple performance cost choices Options include thermocouple contacts, filtered, environmentally sealed dual port package including mixed density Broad selection accessories
Rectangular
Contact Sizes: Current Ratings: amperes Terminations: Crimp, wire solder, straight solder right angle solder Configurations: Multiple variants both standard high densities Qualifications: MIL-DTL-28748, MIL-C-39029, CCITT V.35 Contact Sizes: Current Ratings: amperes nominal Terminations: Crimp, wire solder, straight solder right angle solder Configurations: Multiple variants package sizes Qualifications: Environmental protection IP67
Circular
FEATURES: performance levels available: industrial quality military quality provide performance cost choices Large Surface Area Contact Mating System wide variety accessories Broad selection contact variants package sizes
FEATURES: Non-corrodible lightweight composite construction EMI/RFI shielded versions Thermocouple contacts Environmentally sealed versions Rear insertion/ front release removable contacts level sequential mating Overmolding available full assemblies
Cable
Positronic connector products supplied part cable assemblies whose technical characteristics would reflect those connectors being used within assembly. Contact Sizes: Current Ratings: amperes nominal Terminations: Feed through standard; flying leads board mount available upon request Configurations: D-Subminiature Circular Configurations above Qualifications: Space-D32
Hermetic
FEATURES: Shorten supply chain reduce additional costs delays "cablizing" Overmolding available Shielded environmentally sealed versions available Power cables access boxes which meet J2496 specification
FEATURES: Intended electrical feedthrough high vacuum applications Leakage rate: 10-9 mbar.l/s Signal, power, coax high voltage versions available Connectors mounted flange assembly customer specification
more information, visit www.connectpositronic.com call your nearest Positronic sales office given back this catalog.
NORTH AMERICAN HEADQUARTERS
UNITED STATES, Springfield, Missouri
Factory Sales Engineering Offices (800) 641-4054 (800) 641-4054 (800) 872-7674 (800) 327-8272
PUERTO RICO, Ponce Factory
Factory Sales Engineering Offices
MEXICO
Factory Sales Engineering Offices
CANADA
Factory Sales Engineering Offices
PACIFIC BASIN HEADQUARTERS
SINGAPORE
Factory Sales Engineering Offices 65-6842-1419
ASIA, Direct Sales Offices
Taiwan Sales Office Japan Sales Office India Sales Office 8862-2937-8775 813-5661-3047 91-98220-11175
ASIA-PACIFIC, Technical Agents
Technical Agents China: Shenzhen, Shanghai, Chengdu, Beijing; Korea, Malaysia: Penang; Australia, Zealand, Philippines, Hong Kong, Thailand, Lanka, Pakistan, Cambodia
EUROPEAN HEADQUARTERS
FRANCE, Auch Factory
Factory Sales Engineering Offices (0)5 (0)1 (0)4 (0)2 (0)2351
EUROPE, Direct Sales Offices
Northern France Sales Office Southern France Sales Office Italy Sales Office Germany Sales Office
EUROPE, Technical Agents
Technical Agents Austria, Benelux, Denmark, Finland, Greece, Ireland, Scotland, Slovenia, Spain, Sweden, Switzerland United Kingdom
MIDEAST, Technical Agents
Technical Agents Israel Turkey
POSITRONIC INDUSTRIES, INC.
Campbell 8247 Springfield, 65801 (417) 866-2322 (417) 866-4115 Toll Free (800) 641-4054 info@connectpositronic.com
POSITRONIC INDUSTRIES, S.A.S.
Zone Industrielle d'Engachies Route d'Engachies France 32020 Auch Cedex Telephone (0)5 (0)5 contact@connectpositronic.com
POSITRONIC ASIA LTD.
3014A Road #07-01 Singapore 408703 Telephone (656) 1419 (656) 1421 singapore@connectpositronic.com
Other recent searches
uPD16661A - uPD16661A uPD16661A Datasheet
TS8388B - TS8388B TS8388B Datasheet
TS83102G0 - TS83102G0 TS83102G0 Datasheet
NUF8410MN - NUF8410MN NUF8410MN Datasheet
M32000D4AFP - M32000D4AFP M32000D4AFP Datasheet
DAC7741 - DAC7741 DAC7741 Datasheet
B45196H3227+40 - B45196H3227+40 B45196H3227+40 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
