Phase Noise VCXO (96MHz 200MHz) VCXO output 96MHz 200MHz range ph

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Phase Noise VCXO (96MHz 200MHz) VCXO output 96MHz 200MHz range ph

Datasheet Thumbnail

Top Searches for this datasheet

PLL502-04
Phase Noise VCXO (96MHz 200MHz)
VCXO output 96MHz 200MHz range phase noise. CMOS output. 25MHz crystal input. Integrated variable capacitors. Selectable High Drive (30mA) Standard Drive (10mA) output. Wide pull range (+/- ppm). jitter (RMS): period. 3.3V operation. Available 8-Pin SOIC.
CONFIGURATION
XOUT VCON
Note: denotes internal pull
OUTPUT RANGE
MULTIPLIER FREQUENCY RANGE 200MHz OUTPUT BUFFER CMOS
PLL502-04
DESCRIPTION
PLL502-04 cost, high performance phase noise VCXO 200MHz range. very jitter (4ps period jitter 155.52MHz) makes this chip ideal applications requiring voltage controlled frequency sources CMOS. Input crystal range from 25MHz (fundamental resonant mode).
BLOCK DIAGRAM
Divider
Reference Divider
Phase Comparator
Charge Pump
Loop Filter
XOUT
XTAL VARICAP
VCON
47745 Fremont Blvd., Fremont, California 94538 (510) 492-0990 (510) 492-0991 www.phaselink.com 09/17/04 Page
PLL502-04
Phase Noise VCXO (96MHz 200MHz)
DESCRIPTIONS
Name
XOUT VCON
Number
Type
connected. Voltage Control input. Ground. Output clock. +3.3V power supply.
Description
Crystal output. Crystal Specifications page
Output enable input. Disables (tri-state) output when low. Internal pull-up enables output default connected low. Crystal input. Crystal Specifications page
ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings PARAMETERS
Supply Voltage Input Voltage, Output Voltage, Storage Temperature Ambient Operating Temperature* Junction Temperature Lead Temperature (soldering, 10s) Protection, Human Body Model
SYMBOL
MIN.
-0.5 -0.5
MAX.
+0.5 +0.5
UNITS
Exposure device under conditions beyond limits specified Maximum Ratings extended periods cause permanent damage device affect product reliability. These conditions represent stress rating only, functional operations device these other conditions above operational limits noted this specification implied. Note: Operating Temperature guaranteed design parts (COMMERCIAL INDUSTRIAL), tested COMMERCIAL grade only.
Electrical Specifications PARAMETERS
Supply Current, Dynamic, with Loaded Outputs Operating Voltage Output drive current (High Drive) Output drive current (Standard Drive) Short Circuit Current VCXO Control Voltage
SYMBOL
VCON
CONDITIONS
25MHz Output load 10pF -0.4V, =3.3V 0.4V, 3.3V -0.4V, =3.3V 0.4V, 3.3V
MIN.
TYP.
MAX.
3.63
UNITS
2.97
47745 Fremont Blvd., Fremont, California 94538 (510) 492-0990 (510) 492-0991 www.phaselink.com 09/17/04 Page
PLL502-04
Phase Noise VCXO (96MHz 200MHz)
Electrical Specifications PARAMETERS
Input Crystal Frequency Output Clock Rise/Fall Time (Standard Drive) Output Clock Rise/Fall Time (High Drive) Output Clock Duty Cycle
SYMBOL
CONDITIONS
0.3V 3.0V with load 0.3V 3.0V with load Measured
MIN.
TYP.
MAX.
UNITS
Voltage Control Crystal Oscillator PARAMETERS
VCXO Stabilization Time VCXO Tuning Range output pullability VCXO Tuning Characteristic Pull range linearity VCON input impedance VCON modulation
SYMBOL
VCXOSTB
CONDITIONS
From power valid 25MHz; XTAL VCON 3.3V VCON=1.65V, ±1.65V
MIN.
TYP.
MAX.
UNITS
ppm/V
±200 2000
VCON 3.3V, -3dB
Note: Parameters denoted with asterisk represent nominal characterization data production tested specific limits.
Jitter Phase Noise Specification PARAMETERS
Period Jitter sigma 1000 samples) Phase Phase Phase Phase Phase Noise Noise Noise Noise Noise relative relative relative relative relative carrier carrier carrier carrier carrier
CONDITIONS
155MHz with capacitive decoupling between GND. 155.52MHz @100Hz offset 155.52MHz @1kHz offset 155.52MHz @10kHz offset 155.52MHz @100kHz offset 155.52MHz @1MHz offset
MIN.
TYP.
-120 -128 -122 -120
MAX.
UNITS
dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz
Crystal Specifications PARAMETERS
Crystal Resonator Frequency Crystal Loading Capacitance Rating C0/C1
SYMBOL
(xtal)
MIN.
TYP.
MAX.
UNITS
Note: Crystal Loading rating: 9.5pF loading crystal sees from VCXO chip VCON 1.65V. assumed that crystal will nominal frequency this load. crystal requires more load nominal frequency, additional load must added externally. This however reduce pull range.
47745 Fremont Blvd., Fremont, California 94538 (510) 492-0990 (510) 492-0991 www.phaselink.com 09/17/04 Page
PLL502-04
Phase Noise VCXO (96MHz 200MHz)
PACKAGE INFORMATION
SOIC
Symbol Min. Max. 1.47 1.73 0.10 0.25 0.33 0.51 0.19 0.25 4.80 4.95 3.80 4.00 5.80 6.20 0.38 1.27 1.27
ORDERING INFORMATION
part ordering, please contact Sales Department:
47745 Fremont Blvd., Fremont, 94538, Tel: (510) 492-0990 Fax: (510) 492-0991
PART NUMBER
order number this device combination following: Device number, Package type Operating temperature range
PLL502-04
PART NUMBER Optional High Drive TEMPERATURE C=COMMERCIAL I=INDUSTRAL PACKAGE TYPE S=SOIC
Order Number PLL502-04SC PLL502-04SC PLL502-04HSC PLL502-04HSC
Marking P502-04SC P502-04SC P502-04HSC P502-04HSC
Package Option 8-Pin 8-Pin 8-Pin 8-Pin SOIC SOIC SOIC SOIC (Tube) (Tape Reel) (Tube) (Tape Reel)
PhaseLink Corporation, reserves right make changes products specifications, both time without notice. information furnished Phaselink believed accurate reliable. However, PhaseLink makes guarantee warranty concerning accuracy said information shall responsible loss damage whatever nature resulting from reliance upon this product. LIFE SUPPORT POLICY: PhaseLink's products authorized critical components life support devices systems without express written approval President PhaseLink Corporation.
47745 Fremont Blvd., Fremont, California 94538 (510) 492-0990 (510) 492-0991 www.phaselink.com 09/17/04 Page

Phase Noise VCXO (96MHz 200MHz) VCXO output 96MHz 200MHz range ph

Top Searches for this datasheet

Other recent searches