Download

PDF Abstract Text:

FT-200A Series ­ Mechanically Activated, Wide Angle Pump Switch

Listed 83N2

FT-200A Series - Mechanically Activated, Wide Angle Pump Switch
Listed 83N2
File No. LR54245
Photo not available at this time.
Operational Description
point level detection - liquids
This mechanically activated, wide angle, 20 amp rated pump switch provides automatic control of grinder and high head sewage pumps in grinder and lift station applications, as well as septic tank effluent pump (STEP) systems. The pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications. It is available for pump down applications only. Normally Open Model (pump down) The adjustable pumping range is 9 to 24 in. for this pump switch.
FT-200A Series
Mechanically Activated, Wide Angle Pump Switch
Specifications
Maximum pump running current of 20 amps Heavy duty contacts mounted on high conductivity copper substrates Controls pumps up to 1 1 / 2 HP at 125 VAC and 3 HP at 250 VAC Second set of nonconductive contacts enhance switch activation For direct wiring in 125 VAC or 250 VAC applications (piggy back plug model not available)
Adjustable pumping range of 9 to 24 in. (23 to 61 cm) Includes standard mounting clamp and boxed packaging UL listed for use in nonpotable water and sewage CSA certified Three year limited warranty
Option
Includes standard cable length of 20 ft. (6 m) longer lengths are available
Cable: Flexible 12 gauge, 2 conductor (UL, CSA) SJOW, water resistant (CPE) Float: 3.05 in. dia. x 3.56 in. long (7.75 cm x 9.04 cm), high impact, corrosion resistant, PVC housing for use in sewage and nonpotable water up to 120°F (50°C) ELECTRICAL 125 VAC 50 / 60 Hz Single Phase Maximum Pump Running Current: 20 A Maximum Pump Starting Current: 120 A Recommended Pump HP: 1 1 / 2 HP or less 250 VAC 50 / 60 Hz Single Phase Maximum Pump Running Current: 20 A Maximum Pump Starting Current: 120 A Recommended Pump HP: 3 HP or less Note: This switch must be used with pumps that provide integral thermal overload protection. Certain pump applications may require the use of an external capacitor start kit.
Scientific Technologies Inc. Automation Products Group .. Providing tailored solutions for measurement applications.
To Assist Your Selection Process
See the level and flow control engineering form located at www.automationsensors.com / 6259 (or fax back #6259).
FT-200A-1
Tel: 1 / 888 / 525-7300 · Fax: 1 / 435 / 753-7490 www.stiautomationproducts.com · E-mail: sales@stiautomationproducts.com
FT-200A Series - Mechanically Activated, Wide Angle Pump Switch
Ordering Information
FT-200 -
point level detection - liquids
Explosion or Fire Hazard Warning
Do not use this product with flammable liquids. Do not install in hazardous locations as defined by National Electrical Code, ANSI / NFPA 70.
For the Latest Information
Try Our Fax Back System at 1 / 916 / 431-6544 On the Internet: www.stiautomationproducts.com E-mail: sales@stiautomationproducts.com Scientific Technologies Inc. Automation Products Group .. Providing tailored solutions for measurement applications.
FT-200A-2
Tel: 1 / 888 / 525-7300 · Fax: 1 / 435 / 753-7490 www.stiautomationproducts.com · E-mail: sales@stiautomationproducts.com