16COM/40SEG CONTROLLER/DRIVER GENERAL DESCRIPTION SPLC780B, dot-m
|
|
|
Top Searches for this datasheet
SPLC780B
16COM/40SEG CONTROLLER/DRIVER
GENERAL DESCRIPTION SPLC780B, dot-matrix controller driver from SUNPLUS, unique design displaying alpha-numeric, Japanese-Kana characters symbols. SPLC780B provides types interfaces
MPU: 4-bit 8-bit interfaces. transferring speed 8-bit twice faster than 4-bit. single SPLC780B able display 8-character lines. extended. cascading with SPLC100 SPLC063, display capability
CMOS technology ensures power saves most efficient
performance keeps highest rank.
FEATURES Character generator ROM: 10880 bits Character font dots: characters Character font dots: characters Character generator RAM: bits Character font dots: characters Character font dots: characters 4-bit 8-bit interfaces Direct driver LCD: COMs SEGs Duty factor (selected program): duty: line dots 1/11 duty: line dots 1/16 duty: lines dots line Built-in power automatic reset circuit Built-in oscillator circuit (with external resistor) Support external clock operation Power Consumption Package form: bare chip available
BLOCK DIAGRAM
OSC1 OSC2 CL1,CL2 40-bit Shift Register
Timing Generation Circuit Parallel Serial Data Conversion Circuit Busy Flag Character Generator Character Generator Buffer Instruction Register Instruction Decorder Display Data Bytes 16-bit Shift Register Cursor Blink Control Circuit
DB0-DB3 DB4-DB7 Power Supply Drive (V1-V5) Data Register
Latch Circuit
Segments Commons Driver
COM1COM16
SEG1SEG40
Address Counter
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
FUNCTION DESCRIPTION OSCILLATOR SPLC780B oscillator supports only internal oscillator operation, also external clock operation.
CONTROL DISPLAY INSTRUCTIONS Control display instructions described details follows: Clear Display Code
clears entire display sets Display Data Address Address Counter.
Return Home Code
care sets Display Data Address Address Counter display returns original position. cursor blink goes most-left side display line lines displayed). contents Display Data change.
Entry Mode During writing reading data, defines cursor moving direction shifts display. Code
Increment, Decrement. display shift, display does shift. I/D=1 I/D=0 shifts display left shifts display right
Display On/Off Control Code
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
Display Display Cursor Cursor
character font
character font
line
Cursor
Blinks Blinks
11th line
Cursor Display Shift Without changing data, moves cursor shifts display.
Code
Blink display alternately
Address Counter
Description Shift cursor left Shift cursor right Shift display left. Cursor follows display shift Shift display right. Cursor follows display shift
Function
Code
care sets interface data length. Data transferred with 8-bit length (DB0 DB7). Data transferred with 4-bit length (DB4 DB7). requires times accomplish data transferring. sets number display line. One-line display. Two-line display. sets character font. dots character font. dots character font.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
Display Lines Character Font dots dots dots Duty Factor
cannot display lines with dots character font.
Character Generator Address
Code
sets Character Generator Address (aaaaaa)2 Address Counter. Character Generator data read written after this setting.
Display Data Address
Code
sets Display Data Address (aaaaaaa)2 Address Counter. Display data read written after this setting. one-line display (aaaaaaa)2: (00)16 (4F)16. two-line display (aaaaaaa)2: (00)16 (27)16 first line, (aaaaaaa)2: (40)16 (67)16 second line.
Read Busy Flag Address
Code
When indicates system busy will accept instruction until busy same time, content Address Counter (aaaaaaa)2 read.
Write Data Character Generator Display Data
Code
writes data (dddddddd)2 character generator display data RAM.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
Read Data from Character Generator Display Data
Code
reads data (dddddddd)2 from character generator display data RAM.
read data correctly, following: address Character Generator Display Data shift cursor instruction. (ii) Send Read instruction.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
Instruction Table Instruction Clear Display Instruction Code Description Write "20H" DDRAM DDRAM address "00H" from Return Home DDRAM address "00H" from return cursor original position shifted. changed. Entry Mode Display Control Cursor Display Shift Assign cursor moving direction enable shift entire display display(D), cursor(C), blinking cursor(B) on/off control bit. cursor moving display shift control bit, direction, without changing DDRAM data. Function interface data length (DL: 8-bit/4-bit), numbers display line 2-line/1line) and, display font type (F:5x10 dots/5x8 dots) CGRAM Address DDRAM Address Read Flag Address Counter Write Data Read Data from Busy CGRAM address address counter. DDRAM address counter Whether during internal operation known reading contents address counter also read. Write data into internal (DDRAM/CGRAM). Read data from internal (DDRAM/CGRAM).
"-": don't care
Execution time (fosc=270KHz) 1.52ms
1.52ms
contents DDRAM
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
8-Bit operation 8-digit 1-line display (using internal reset)
Instruction
Power SPLC780B starts initializing Function DB6DB5DB4DB3DB2 DB1DB0
Display
Operation
Power reset display 8-bit operation select 1-line display line character font
Display control
Display Cursor appear Increase address will shift cursor right when writing display shift Write cursor incremented shifted right Write cursor incremented shifted right
Entry mode
Write data
Write data
Write data WELCOME_ Write cursor incremented shifted right mode display shift when writing Write "(space) cursor incremented shifted right Write cursor incremented shifted right
Entry mode WELCOME_
Write data ELCOME
Write data LCOME
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
Instruction
Write data
Display
COMPAMY_
Operation
Write cursor incremented shifted right Only shift cursor's position left Only shift cursor's position left Write display moves left Shift display cursor's position right Shift display cursor's position right Write space cursor incremented shifted right
Cursor display shift COMPAMY
Cursor display shift COMPAMY
Write data OMPANY
Cursor display shift COMPANY
Cursor display shift COMPANY_
Write data OMPANY
Return home WELCOME
Both display cursor return original position address
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
4-Bit operation 8-digit 1-line display (using internal reset)
Instruction
Power SPLC780B starts initializing Function
Display
Operation
Power reset display
4-bit operation
Function 4-bit operation select 1-line display line character font
Display control Increase address will shift cursor right when writing display shift
Display Cursor appears
Entry mode
Write data Write cursor incremented shifted right
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
8-Bit operation 8-digit 2-line display (using internal reset)
Instruction
Power SPLC780B starts initializing Function DB6DB5DB4DB3DB2 DB1DB0
Display
Operation
Power reset display 8-bit operation select 2-line display line character font
Display control
Display Cursor appear Increase address will shift cursor right when writing display shift Write cursor incremented shifted right
Entry mode
Write data
Write data WELCOME WELCOME Write cursor incremented shifted right sets RAM's address cursor moved beginning position line Write cursor incremented shifted right
WELCOME_
address
Write data
Write data WELCOME PART_ WELCOME PART_ ELCOME PARTY_ Write cursor incremented shifted right When writing sets mode display shift Write cursor incremented shifted right
Entry mode
Write data
Return home WELCOME PARTY
Both display cursor return original position address
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
RESET FUNCTION power SPLC780B starts internal auto-reset circuit executes initial instructions. initial procedures shown follows:
8-Bit Interface Power
Wait time after 4.5V
Wait time 40ms After 2.7V
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
checked after following instructions Function Interface bits length Specify number display lines character font number display lines character font cannot changed afterwards Display Display clear Initialization Ends Entry mode
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
4-Bit Interface Power
Wait time after 4.5V
Wait time 40ms After 2.7V
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
checked after following instructions Function interface bits length) Interface bits length Function Interface bits length Specify number display lines character font number display lines character font cannot changed afterwards Display Display clear
Initialization Ends
Entry mode
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
DISPLAY DATA RAM) 80-bit normally used storing display data. Those used display data used general data RAM. address configured Address Counter. relationships between Display Data Address position depicted follows.
1-line display display characters
Display position Display data address
Example 1-line display display characters
Display position Display data address
When display shift operation performed display data RAM's address moves Left shift Right shift
TIMING GENERATION CIRCUIT timing generating circuit able generate timing signals internal circuits. order prevent internal timing interface, access timing access timing generated independently.
DRIVER CIRCUIT Total commons segments signal drivers valid driver circuit. When program
specifies character fonts line numbers, corresponding common signals output drive-waveforms others still output unselected waveforms.
CHARACTER GENERATOR ROM) Using 8-bit character code, character generator generates dots dots character patterns. also generate 192's dots character patterns 64's dots character patterns.
CHARACTER GENERATOR RAM) Users easily change character patterns character generator through program. written dots, 8-character patterns dots 4-character patterns.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
following diagram shows SPLC780B character patterns: Correspondence between Character Codes Character Patterns
Lower 4-bit Character Code (Hexadecimal)
Higher 4-bit Character Code (Hexadecimal)
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
relationships between Character Generator Addresses, Character Generator Data (character patterns), Character Codes depicted follows: character patterns
Character Code Data Address Character Patterns Data Character Pattern Example Cursor Position Character Pattern Example
Note means that bit0~2 character code correspond bit3~5 address These areas used display used general data
When bit4-7 character code character patterns selected Selected selected care
example (1), character code b7-b4 display That means character code (00) 16,and (08) display character. bits character code character pattern line position. line cursor position display formed logical with cursor.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
character patterns
Character Code Data Address Character Patterns Data Cursor Position Character Pattern Example
Note means that bit1~2 character code correspond bit4~5 address These areas used display used general data
When bit4-7 character code character patterns selected Selected selected care
example (1), character code b7-b4 display That means character codes (00) (01) (08) 16,and (09) display character. bits character code character pattern line position. 11th line cursor position display formed logical with cursor.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CURSOR BLINK CONTROL CIRCUIT This circuit generates cursor blink cursor blink control circuit. cursor blink appears digit Display Data Address defined Address Counter. When Address Counter (07) cursor position shown belows:
1-line display digit
Display position Display data address Hexadecimal
cursor position 2-line display digit line line cursor position Display position Display data address Hexadecimal
INTERFACING There types data operations: 4-bit 8-bit operations. Using 4-bit MPU, interfacing 4-bit data transferred 4-busline (DB4 DB7). Thus, lines used. Using 4-bit
interface 8-bit data requires times transferring. First, higher 4-bit data transferred 4-busline (for 8-bit operation, DB4). Secondly, lower 4-bit data transferred 4-busline (for 8-bit operation,
DB0). 8-bit MPU, 8-bit data transferred 8-buslines (DB0 DB7).
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
SUPPLY VOLTAGE DRIVE Different voltages supplied SPLC780B pins obtaining drive-waveform. relationships between bias, duty factor supply voltages shown belows:
Duty Factor Supply Voltage Bias
VLCD
power connections (1/4 Bias, Bias) shown belows:
Bias (1/8,1/11 Duty) Bias (1/16 Duty) VLCD
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
bypass-capacitor improves display quality.
VDD( Bias (1/8,1/11 Duty) Bias (1/16 Duty) VDD(
bias voltage must have following relations:
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
relationship between frame frequency oscillator frequency (Assume oscillation frequency 250KHz, clock cycle time
Duty clocks
COM1 V2(V3) frame frame 12800 12.8 Frame frequency 78.1 (Hz) 12.8 (ms)
Duty clocks
COM1 V2(V3) frame frame 17600 17.6 56.8 (Hz) Frame frequency 17.6 (ms)
Duty clocks
COM1 frame frame 12800 12.8 78.1 (Hz) Frame frequency 12.8 (ms)
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
REGISTER (Instruction Register) (Data Register) SPLC780B contains 8-bit registers: Instruction Register (IR) Data Register (DR). Using combinations selects below: write(Display clear, etc.) Read busy flag (DB7) Address Counter (DB0 DB6) write Display data Character generator RAM) read (Display data Character generator Operation
written MPU, cannot read MPU.
BUSY FLAG (BF) When busy flag output DB7. busy flag SPLC780B busy state does accept instruction until busy flag
ADDRESS COUNTER (AC) Address Counter assigns addresses Display Data Character Generator RAM. When instruction address written address information sent from After writing to/reading
from Display Data Character Generator RAM, automatically incremented decremented one). contents output when
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
PORT CONFIGURATION
Input port Input port PMOS PMOS
PMOS
NMOS
NMOS
Output port PMOS
NMOS
Input Output port DB0-DB7 PMOS Enable
PMOS
NMOS
Data
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
DESCRIPTION Mnemonic OSC1, OSC2 Type Power input Ground Both OSC1 OSC2 connected resistor internal oscillator circuit. external clock operation, clock input OSC1. Supply voltage driving. start signal reading writing data. signal selecting read write actions. Read, Write. signal selecting registers. Data Register (for read write) Instruction Register (for write), Busy flag Address Counter (for read). 4-bit data High 4-bit data Clock latch serial data Clock shift serial data Switch signal convert waveform Sends character pattern data corresponding each common signal serially. SEG1 SEG40 SEG1 SEG16 Selection, Non-selection. Description
Segment signals LCD. Common signals LCD.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
ABSOLUTE MAXIMUM RATINGS Characteristics Operating Voltage Driver Supply Voltage Input Voltage Range Operating Temperature Storage Temperature Symbol VLCD TSTO Ratings -0.3V +7.0V 0.3V -0.3V 0.3V +125
Note: Stresses beyond those given Absolute Maximum Rating table cause operational errors damage device. normal operational conditions AC/DC Electrical Characteristics.
CHARACTERISTICS Characteristics Operating Current Input High Voltage Input Voltage Input High Voltage Input Voltage Input High Current Input Current Output High Voltage (TTL) Output Voltage (TTL) Output High Voltage (CMOS) Output Voltage (CMOS) Driver Resistance (COM) Driver Resistance (SEG) Voltage Symbol
4.5V) Limit Unit Min. Typ. Max. 0.55 0.2VDD Pins:(E, R/W, DB7) OSC1 Pins: (RS, R/W, DB7) 3.0V 0.1mA Pins: 0.1mA Pins: Pins: CL1, CL2, Pins: CL1, CL2, VLCD External clock (Note) 0.7VDD -0.3 0.7VDD -0.2 -1.0 -5.0 0.75VDD Test Condition
VIH1 VIL1 VIH2 VIL2 VOH1
VOL1
0.2VDD
VOH2
0.8VDD
VOL2
0.2VDD
RCOM
Pins: COM1 COM16 VLCD
RSEG VLCD
11.0
Pins: SEG1 SEG40 VDD-V5, bias bias
Note: FOSC 250KHz, "L", R/W, open, outputs loads.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTERISTICS INTERNAL CLOCK OPERATION Limit Characteristics Symbol Min. Frequency FOSC1 Typ. Max. Unit Test Condition 4.5V)
EXTERNAL CLOCK OPERATION Limit Characteristics External Frequency Duty Cycle Rise/Fall Time Symbol Min. FOSC2 Typ. Max. Unit Test Condition
WRITE MODE (Writing data from SPLC780B) Limit Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Setup Time Data Hold Time Symbol Min. tSP1 tHD1 tSP2 tHD2 1000 Typ. Max. Pins: R/W, Pins: R/W, Pins: Pins: Unit Test Condition
READ MODE (Reading data from SPLC780B MPU) Limit Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Output Delay Time Data hold time Symbol Min. tSP1 tHD1 tHD2 1000 Typ. Max. Pins: R/W,E Pins: R/W,E Pins: Unit Test Condition
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTERISTICS Characteristics Operating Current Input High Voltage Input Voltage Input High Voltage Input Voltage Input High Current Input Current Output High Voltage (TTL) Output Voltage (TTL) Output High Voltage (CMOS) Output Voltage (CMOS) Driver Resistance (COM) Driver Resistance (SEG) Voltage Symbol Min. VIH1 VIL1 VIH2 VIL2 VOH1 -0.3 VDD-1 -0.2 -2.0 Typ. 0.55 Max. -100 Pins:(E, R/W, DB7) OSC1 OSC1 Pins: (RS, R/W, DB7) 5.0V 0.1mA Pins: 0.1mA Pins: Pins: CL1, CL2, Pins: CL1, CL2, RCOM VLCD External clock (Note) 5.5V) Limit Unit Test Condition
VOL1
VOH2
0.9VDD
VOL2
0.1VDD
Pins: COM1 COM16 VLCD
RSEG VLCD
11.0
Pins: SEG1 SEG40 VDD-V5, bias bias
Note: FOSC 250KHz, "L", R/W, open, outputs loads.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTERISTICS INTERNAL CLOCK OPERATION Limit Characteristics Symbol Min. Frequency FOSC1 Typ. Max. Unit Test Condition 5.5V)
EXTERNAL CLOCK OPERATION Limit Characteristics External Frequency Duty Cycle Rise/Fall Time Symbol Min. FOSC2 Typ. Max. Unit Test Condition
WRITE MODE (Writing Data from SPLC780B) Limit Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Setup Time Data Hold Time Symbol Min. tSP1 tHD1 tSP2 tHD2 Typ. Max. Pins: R/W, Pins: R/W, Pins: Pins: Unit Test Condition
READ MODE (Reading Data from SPLC780B MPU) Limit Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Output Delay Time Data hold time Symbol Min. tSP1 tHD1 tHD2 Typ. Max. Pins: R/W,E Pins: R/W,E Pins: Unit Test Condition
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
INTERFACE MODE WITH DRIVER (SPLC100A1) Limit Characteristics Clock pulse width high Clock pulse width Clock setup time Data setup time Data hold time delay time Symbol Min. tPWH tPWL tCSP tDSP -1000 Typ. Max. 1000 Pins: CL1, Pins: CL1, Pins: CL1, Pins: Pins: Pins: Unit Test Condition
WRITE MODE TIMING DIAGRAM (Writing Data from SPLC780B)
VIH1 VIL1 tSP1 VIL1 VIH1 VIL1 VIH1 VIL1 VIH1 VIL1 tSP2 tHD2 VIH1 VIL1 tHD1 VIL1 VIH1 VIL1 tHD1 VIL1
Valid Data
READ MODE TIMING DIAGRAM (Reading Data from SPLC780B MPU)
VIH1 VIL1 tSP1 VIH1 VIH1 VIL1 VIH1 VIL1 VIH1 VIL1 tHD2 Valid Data VIH1 VIL1 VIH1 VIL1 tHD1 VIH1
tHD1 VIL1
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
INTERFACE MODE WITH SPLC100A1 TIMING DIAGRAM
0.9VDD
tPWH tCSP
0.9VDD
tPWH
0.9VDD 0.1VDD 0.1VDD
tCSP
0.9VDD 0.1VDD
tPWL
0.9VDD 0.1VDD
tDSP
0.1VDD
APPLICATION NOTES R-OSCILLATOR
oscillation resistor used only internal oscillaotr operation mode.
OSC1 OSC2
when when
Since oscillation frequency varies depending OSC1 OSC2 capacitance, wiring length these pins should minimized.
Fosc
Fosc
Rosc Kohms
Rosc Kohms
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
INTERFACE
Interface 8-bit 6805
6805
COM1 COM16 SPLC780B
PANEL COMMONS
SEG1 SEG40
SEGMENTS
Interface 8-bit IORQ SEG1 SEG40 SEGMENTS
COM1 COM16 SPLC780B
PANEL COMMONS
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
SPLC780B APPLICATION CIRCUIT
MATRIX PANEL
COM16 (COM8) COM1
SEG40 SEG1
Y1-Y40 SHL1 SHL2
SPLC100A1
SPLC100A1
SPLC100A1
Y1-Y40 SHL1 SHL2 V1V2 V3V4V5V6
Y1-Y40 SHL1 SHL2 V1V2 V3V4V5V6
V1V2V3 V4V5 SPLC780B
Suggested values
0.47
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
APPLICATIONS
SPLC780B COM1 Panel COM8 SEG1 characters line
SEG40 Example dots characters line Bias Duty SPLC780B COM1 Panel characters line COM11 SEG1
SEG40 Example dots characters line Bias Duty SPLC780B COM1 Panel COM8 COM9 COM16 SEG1 characters lines
SEG40
Example dots characters lines Bias Duty
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
SPLC780B COM1 COM8 SEG1 SEG40 COM9 COM16 Example dots characters line Bias Duty
SPLC780B
SEG1 SEG20 COM1 Panel COM8 characters lines
SEG21 SEG40 Example dots characters lines Bias Duty
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTER GENERATOR (SPLC780B-03)
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTER GENERATOR (SPLC780B-08)
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTER GENERATOR (SPLC780B-11)
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTER GENERATOR (SPLC780B-12)
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
CHARACTER GENERATOR (SPLC780B-13)
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
ASSIGNMENT LOCATIONS ASSIGNMENT
Chip Size: 3810 3220 Size: This substrate should connected
Ordering Information Product Number SPLC780B-nnnnV-C
Note1: Code number (nnnnV) assigned customer. Note2: Code number (nnnn 0000 9999); version
Package Type Chip form
NOTE: SUNPLUS TECHNOLOGY CO., reserves right make changes time without notice order improve design performance supply best possible product.
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
LOCATIONS Name OSC1 OSC2 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1711 -1722 -1574 -1428 -1281 -1135 -987 -836 -690 -542 -396 -162 1264 1090 -153 -300 -447 -594 -740 -888 -1034 -1180 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1417 Name COM10 COM11 COM12 COM13 COM14 COM15 COM16 SEG40 SEG39 SEG38 SEG37 SEG36 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 1012 1159 1305 1453 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1719 1696 1550 1404 1256 1110 -1417 -1417 -1417 -1417 -1417 -1417 -1417 -1426 -1279 -1132 -986 -838 -692 -546 -398 -252 -105 1069 1417 1417 1417 1417 1417 1417 1417
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
Name SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 -211 -357 1417 1417 1417 1417 1417 1417 1417 1417 Name SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 -504 -651 -798 -944 -1092 -1238 -1384 -1711 1417 1417 1417 1417 1417 1417 1417 1437
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
PACKAGE CONFIGURATION View
SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 SEG36 SEG37 SEG38
SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG09 SEG08 SEG07 SEG06 SEG05 SEG04 SEG03 SEG02 SEG01 OSC1
SEG39 SEG40
COM16 COM15 COM14 COM13 COM12 COM11 COM10 COM9 COM8 COM7 COM6 COM5 COM4 COM3 COM2 COM1
SPLC780B-XX
OSC2
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
PACKAGE INFORMATION Outline Dimensions Unit: inch/mm
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
SPLC780B
DISCLAIMER information appearing this publication believed accurate. Integrated circuits sold Sunplus Technology covered warranty patent indemnification provisions stipulated terms sale only. SUNPLUS makes warranty, express, statutory implied
description regarding information this publication regarding freedom described chip(s) from patent infringement. FURTHER, SUNPLUS MAKES WARRANTY MERCHANTABILITY FITNESS PURPOSE. SUNPLUS reserves right halt production alter specifications prices Accordingly, reader cautioned verify that data sheets other Products described herein intended
time without notice.
information this publication current before placing orders. normal commercial applications.
Applications involving unusual environmental reliability
requirements, e.g. military equipment medical life support equipment, specifically recommended without additional processing SUNPLUS such applications. illustrated this document reference purposes only. Please note that application circuits
Sunplus Technology Co., Ltd.
Rev.:
2000.10.25
Other recent searches
TPS5120 - TPS5120 TPS5120 Datasheet
ST750A - ST750A ST750A Datasheet
PUB4119 - PUB4119 PUB4119 Datasheet
PUB4419 - PUB4419 PUB4419 Datasheet
PUB4219 - PUB4219 PUB4219 Datasheet
PUB4519 - PUB4519 PUB4519 Datasheet
KSK-1A85-2025 - KSK-1A85-2025 KSK-1A85-2025 Datasheet
G244B - G244B G244B Datasheet
CD4538BC - CD4538BC CD4538BC Datasheet
BTRS-9620G - BTRS-9620G BTRS-9620G Datasheet
BTRS-9620-SPG - BTRS-9620-SPG BTRS-9620-SPG Datasheet
2SK2628FS - 2SK2628FS 2SK2628FS Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
