ZVG67W 500PCS SDSA4588 - Datasheet Archive

 

ZVG67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP www.SunLED.com Features GSINGLE COLOR. GSUITABLE FOR ALL SMT ASSEMBLY AND

 

Part Number: ZVG67W ZVG67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP www.SunLED.com Features GSINGLE COLOR. GSUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. GAVAILABLE ON TAPE AND REEL. GIDEAL FOR BACKLIGHTING. GPACKAGE : 500PCS 500PCS / REEL. GMOISTURE SENSITIVITY LEVEL : LEVEL 4. GRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) ) VG (InGaAlP) Operating Characteristics (TA=25°C) ) Unit VG (InGaAlP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.1 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V 150 mA Reverse Current (Max.) (VR=5V) IR 10 uA PT 105 mW P 574 nm TA -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) Tstg -40 ~ +85 Wavelength of Dominant Emission (Typ.) (IF=20mA) D 570 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Reverse Voltage VR 5 V Forward Current IF 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Operating Temperature Storage Temperature Part Number Emitting Color Emitting Material °C Lens-color Luminous Intensity (IF=20mA) mcd min. ZVG67W ZVG67W Green Published Date : MAY 24, 2006 InGaAlP Water Clear Drawing No : SDSA4588 SDSA4588 69 Viewing Angle 2 1/2 574 90° typ. 36 Wavelength nm P V2 Checked : B.L.LIU P.1/3 Part Number: ZVG67W ZVG67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP www.SunLED.com VG Published Date : MAY 24, 2006 Drawing No : SDSA4588 SDSA4588 V2 Checked : B.L.LIU P.2/3 Part Number: ZVG67W ZVG67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAY 24, 2006 Drawing No : SDSA4588 SDSA4588 V2 Checked : B.L.LIU P.3/3