ZFBBA07C 550PCS SDSA5326 - Datasheet Archive

 

ZFBBA07C SURFACE MOUNT DISPLAY www.SunLED.com PRELIMINARY SPEC Features 0.3 INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT

 

Part Number: ZFBBA07C ZFBBA07C SURFACE MOUNT DISPLAY www.SunLED.com PRELIMINARY SPEC Features 0.3 INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS 550PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.The gap between the reflector and PCB shall not exceed 0.25mm. VF 3.05 V Forward Voltage (Max.) (IF=10mA) VF 4.0 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) P 468 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) D 470 nm °C Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) 21 nm V Capacitance (VF=0V, f=1MHz) C 100 pF BBA (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 120 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Electrostatic Discharge Threshold (HBM) Part Number Emitting Color 1000 Emitting Material mW Luminous Intensity (IF=10mA) ucd min. ZFBBA07C ZFBBA07C Blue Published Date : MAR 03,2008 InGaN Unit Forward Voltage (Typ.) (IF=10mA) 4. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) BBA (InGaN) Description 468 Common Cathode, Rt. Hand Decimal typ. 1200 Wavelength nm P 5990 Drawing No : SDSA5326 SDSA5326 V3 Checked : Shin Chi P.1/4 Part Number: ZFBBA07C ZFBBA07C SURFACE MOUNT DISPLAY www.SunLED.com BBA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 03,2008 Drawing No : SDSA5326 SDSA5326 V3 Checked : Shin Chi P.2/4 Part Number: ZFBBA07C ZFBBA07C SURFACE MOUNT DISPLAY www.SunLED.com Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : MAR 03,2008 Drawing No : SDSA5326 SDSA5326 V3 Checked : Shin Chi P.3/4 Part Number: SURFACE MOUNT DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 03,2008 ZFBBA07C ZFBBA07C Drawing No : SDSA5326 SDSA5326 ZFBBA07C ZFBBA07C V3 Checked : Shin Chi P.4/4