ZBG77W 1000PCS/REEL SDSA4519 - Datasheet Archive

 

ZBG77W 4.5x2mm SMD CHIP LED LAMP www.SunLED.com Features 4.5x2mm SMT LED,0.5mm THICKNESS LOW POWER CONSUMPTION. IDEAL FOR

 

Part Number: ZBG77W ZBG77W 4.5x2mm SMD CHIP LED LAMP www.SunLED.com Features 4.5x2mm SMT LED,0.5mm THICKNESS LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1000PCS/REEL 1000PCS/REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) ) BG (InGaN) Unit Operating Characteristics ) (TA=25°C) BG (InGaN) Unit Forward Voltage (Typ.) (IF=20mA) Reverse Voltage VR 5 Forward Current IF 30 mA VF 3.5 V Forward Voltage (Max.) (IF=20mA) V VF 4.5 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Reverse Current (Max.) (VR=5V) IR 10 uA Power Dissipation PT 105 mW Operating Temperature TA -40 ~ +85 P 520 nm Tstg -40 ~ +85 °C Wavelength of Peak Emission (Typ.) (IF=20mA) V Wavelength of Dominant Emission (Typ.) (IF=20mA) D 525 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) 38 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF Storage Temperature Electrostatic Discharge Threshold (HBM) Part Number Emitting Color 1000 Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. ZBG77W ZBG77W Green Published Date : MAY 22,2006 InGaN Water Clear Drawing No : SDSA4519 SDSA4519 745 Viewing Angle 2 1/2 520 20° typ. 380 Wavelength nm P V2 Checked : B.L.LIU P.1/3 Part Number: ZBG77W ZBG77W 4.5x2mm SMD CHIP LED LAMP www.SunLED.com BG Published Date : MAY 22,2006 Drawing No : SDSA4519 SDSA4519 V2 Checked : B.L.LIU P.2/3 Part Number: ZBG77W ZBG77W 4.5x2mm SMD CHIP LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAY 22,2006 Drawing No : SDSA4519 SDSA4519 V2 Checked : B.L.LIU P.3/3