NEW DATABASE - 350 MILLION DATASHEETS FROM 8500 MANUFACTURERS
NEW DATABASE - 350 MILLION DATASHEETS FROM 8500 MANUFACTURERS
ZBG46W-9 1000PCS SDSA0512 - Datasheet Archive
www.SunLED.com ZBG46W-9 SUBMINIATURE SOLID STATE LAMP Features SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. Z-BEND LEAD. LONG
Part Number: www.SunLED.com ZBG46W-9 ZBG46W-9 SUBMINIATURE SOLID STATE LAMP Features SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. Z-BEND LEAD. LONG LIFE-SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS 1000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) ) BG (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Power Dissipation PT 105 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Operating Characteristics (TA=25°C) ) BG (InGaN) Unit Part Number Emitting Color 1000 Emitting Material V 3.5 V Forward Voltage (Max.) (IF=20mA) VF 4.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) p 520 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) D 525 nm 38 nm Capacitance (VF=0V, f=1MHz) Electrostatic Discharge Threshold (HBM) °C VF Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Storage Temperature Forward Voltage (Typ.) (IF=20mA) C 45 pF Luminous Intensity (IF=20mA) mcd Lens-color min. ZBG46W-9 ZBG46W-9 Green Published Date : MAY 23,2006 InGaN Water Clear Drawing No : SDSA0512 SDSA0512 795 Viewing Angle 2 1/2 520 20° typ. 380 Wavelength nm P V5 Checked : B.L.LIU P.1/3 Part Number: www.SunLED.com ZBG46W-9 ZBG46W-9 SUBMINIATURE SOLID STATE LAMP BG Published Date : MAY 23,2006 Drawing No : SDSA0512 SDSA0512 V5 Checked : B.L.LIU P.2/3 Part Number: www.SunLED.com ZBG46W-9 ZBG46W-9 SUBMINIATURE SOLID STATE LAMP Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAY 23,2006 Drawing No : SDSA0512 SDSA0512 V5 Checked : B.L.LIU P.3/3