TSOP18 TSOP1830 TSOP1836 TSOP1838 TSOP1856 TSOP1833 TSOP1837 TSOP1840 TSIP5201 - Datasheet Archive

 

Photo Modules for PCM Remote Control Systems Available types for different carrier frequencies Type TSOP1830 TSOP1836 TSOP1838

 

TSOP18 TSOP18. Photo Modules for PCM Remote Control Systems Available types for different carrier frequencies Type TSOP1830 TSOP1830 TSOP1836 TSOP1836 TSOP1838 TSOP1838 TSOP1856 TSOP1856 f0 30 kHz 36 kHz 38 kHz 56 kHz Type TSOP1833 TSOP1833 TSOP1837 TSOP1837 TSOP1840 TSOP1840 f0 33 kHz 36.7 kHz 40 kHz Description The TSOP18 TSOP18. ­ series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses. 96 12582 Features D D D D D Improved shielding against electric field Photo detector and preamplifier in one package disturbance Output active low D 3­6 Volt supply voltage, low power consumption D TTL and CMOS compatibility D Intelligent AGC Internal filter for PCM frequency Advanced immunity against ambient light Block Diagram 3 Control Circuit Input 100 kW 1 PIN AGC Band Pass VS OUT Demodulator 2 GND 96 12226 TELEFUNKEN Semiconductors Rev. A1, 29-Aug-96 1 (7) TSOP18 TSOP18. Absolute Maximum Ratings Tamb = 25_C Parameter Test Conditions Supply Voltage Supply Current Output Voltage Output Current Junction Temperature Storage Temperature Range Operating Temperature Range Power Consumption Soldering Temperature Symbol VS IS VO IO Tj Tstg Tamb Ptot Tsd (Pin 3) (Pin 3) (Pin 1) (Pin 1) x (Tamb 85 °C) t 10 s, 1 mm from case x Value ­0.3.6.0 5 ­0.3.6.0 5 100 ­25.+85 ­25.+85 50 260 Unit V mA V mA °C °C °C mW °C Typ 1.2 1.6 30 Max 1.8 Unit mA mA m 250 mV Basic Characteristics Tamb = 25_C Parameter Supply Current ( pp y (Pin 3) ) Transmission Distance Output Voltage Low (Pin 1) Irradiance (30 ­ 40 kHz) Irradiance (56 kHz) Irradiance Directivity Test Conditions VS = 5 V, Ev = 0 VS = 5 V, Ev = 40 klx, sunlight Ev = 0, test signal see fig.8, IR diode TSIP5201 TSIP5201, IF = 300 mA IOSL = 0.5 mA,Ee = 0.7 mW/m2, f = fo Pulse width tolerance: tpi ­ 5/fo < tpo < tpi + 5/fo, test signal (see fig.8) Pulse width tolerance: tpi ­ 5/fo < tpo < tpi + 5/fo, test signal (see fig.8) Symbol ISD ISH d Min 0.9 VOSL Ee min 0.5 mW/m2 Ee min Angle of half transmission distance 0.4 0.5 0.7 mW/m2 Ee max 1/2 W/m2 deg 30 ±45 Application Circuit 330 W *) 3 TSOP18 TSOP18. TSUS 5. TSIP 5. 1 4.7 mF *) +5 V *) >10 kW optional mC 2 GND 96 12212 2 (7) *) only necessary to suppress power supply disturbances *) tolerated supply voltage range : 3 V