TLP114A UL1577 E67349 11-4C2 I06VCC 5X1010 000707I - Datasheet Archive

 

TLP114A(IGM) TENTATIVE TOSHIBA PHOTOCOUPLER GaAMs IRED + PHOTO-IC TLP1 1 4A(I G M) TRANSISTOR INVERTOR INVERTER FOR AIR

 

TOSHIBA TLP114A TLP114A(IGM) TENTATIVE TOSHIBA PHOTOCOUPLER GaAMs IRED + PHOTO-IC TLP1 1 4A(I G M) TRANSISTOR INVERTOR INVERTER FOR AIR CONDITIONER LINE RECEIVER IPM INTERFACES The TOSHIBA MINI FLAT COUPLER TLP114A TLP114A is a small outline coupler, suitable for surface mount assembly. TLP114A TLP114A consists of a high output power GaA£As light emitting diode, optically coupled to a high speed detector of one chip photodiode-transistor. TLP114A TLP114A(IGM) has no internal base connection, and a Faraday shield integrated on the photodetector chip provides an effective common mode noise transient immunity. TLP114A TLP114A(IGM) guarantees minimum and maximum of propagation delay time, switching time dispersion, and high common mode transient immunity. Therefor TLP114A TLP114A(IGM) is suitable for isolation interface between IPM (Intelligent Power Module) and control IC circuits in motor control application. Isolation Voltage : 3750Vrms (Min.) Common Mode Transient Immunity : ±10kV/^s (Min.) Switching Time Switching Time Dispersion (ItpLH-tpHLl) TTL Compatible UL Recognized @VCM = 1500V tpHL> tpLH =0.1^s (Min.) = 0.8/^s (Max.) @ Ijp = 10mA, Vec = 15V, RL = 20kH, Ta = 25°C 0.1/us (Max.) UL1577 UL1577, File No.E67349 E67349 Unit in mm 6 5 4 111 â- t o y H 1 3 3.6 ±0.2 1^27 2.54 .0.4 7.0 ±0.4 JA ,0.5min. TOSHIBA 11-4C2 11-4C2 Weight : 0.09g PIN CONFIGURATION (Top view) ANODE CATHODE EMITTER (GND) COLLECTOR (OUTPUT) 6: VCC SCHEMATIC IF lQC VF 3 I06VCC I06VCC J-^-oGND SHIELD 4 1 2001-06-01 TOSHIBA TLP114A TLP114A(IGM) MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC SYMBOL RATING UNIT Forward Current (Note 1) IF 20 mA Q Pulse Forward Current (Note 2) Ifp 40 mA H J Peak Transient Forward Current (Note 3) IFPT 1 A Reverse Voltage Vr 5 V ^ Output Current Io 8 mA o Peak Output Current lop 16 mA o a> Output Voltage Vo -0.5-20 V a> Supply Voltage Vcc -0.5-30 V H Output Power Dissipation (Note 4) Po 100 mW Operating Temperature Range Topr -55-100 °C Storage Temperature Range Tstg -55-125 °C Lead Soldering Temperature (10s) Tsol 260 °C Isolation Voltage (AC, lmin., R.H.^60%, Ta = 25°C) (Note 5) BVS 3750 Vrms (Note 1) : Derate 0.36mA above 70°C. (Note 2) : 50% duty cycle, 1ms pulse width. Derate 0.72mA/°C above 70°C. (Note 3) : Pulse width PW^l/^s, 300pps. (Note 4) : Derate 1.8mW/°C above 70°C. (Note 5) : Device considerd a two terminal device : pins 1, 3 shorted together and pins 4, 5, 6 shorted together. 2 2001-06-01 TOSHIBA TLP114A TLP114A(IGM) ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Forward Voltage VF IF = 16mA 1.22 1.42 1.72 V LED Forward Voltage Temperature Coefficient ¿Vf/¿Ta IF = 16mA - -2 - mV/°C Reverse Current IR VR = 5V - - 10 /uA Capacitance between Terminal CT VF = 0, f = 1MHz - 30 - pF lOH (1) iF=omA, vCc=vo=5.5V - 3 500 nA h High Level Output Current :OH (2) If = 0mA, VCC = 30V Vq = 20 V - - 5 fxA o o a> :OH If = 0mA, VCC = 30V Vo = 20V, Ta = 70°C - - 50 -tj a> Q High Level Supply Current Ã�CCH If = 0mA, Vcc = 30V - 0.01 1 fxA Supply Voltage vcc ICC = 0.01mA 30 - - V Output Voltage v0 IO = 0.5mA 20 - - V COUPLED ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Current Transfer Ratio io /IF If = 10mA, Vcc = 4.5V VO = 0.4V 25 35 75 Of If = 16mA, Vcc = 4.5V VO = 0.4V, Ta= - 25~100°C 15 - - 70 Low Level Output Voltage vol If = 10mA, Vcc-4.5V Iq = 2.4mA - - 0.4 V ISOLATION CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION MIX. TYP. MAX. UNIT Capacitance Input to Output es V = 0, f= 1MHz (Note 5) - 0.8 - pF Isolation Resistance Rs R.H.^60%, Vg = 500V (Note 5) 5X1010 5X1010 IO14 - n AC, 1 minute 3750 - - Vrms Isolation Voltage BVS AC, 1 second, in oil - 10000 - Vdc DC, 1 minute, in oil - 10000 - 3 2001-06-01 TOSHIBA TLP114A TLP114A(IGM) SWITCHING CHARACTERISTICS (Ta = 25°C, VCC = 15V) CHARACTERISTIC SYMBOL TEST CIRCUIT TEST CONDITION MIN. TYP. MAX. UN'IT Propagation Delay Time (H-L) Propagation Delay Time (L-H) tpHL tpLH 1 IF = 0^ 10mA, RL = 20kil 0.1 0.45 0.8 jus IF = 0^ 10mA, RL = 20kil Ta = 0~85°C 0.1 0.45 0.9 IF = 0^ 10mA, RL = 20kil Ta= - 25~100°C 0.1 0.45 1.0 Switching Time Dispersion between ON and OFF |tpLH-tpHL| IF = 10^0mA, RL = 20kil - 0.15 0.7 jus IF = 10^0mA, RL = 20kil Ta = 0~85°C - 0.25 0.8 IF = 10^0mA, RL = 20kil Ta= - 25~100°C - 0.25 0.9 Common Mode Transient Immunity at Logic High Output (Note 6) cmh 2 IF = 0mA VCM = 1500Vp.p RL = 20kH 1 ()()()() 15000 - V / jus Common Mode Transient Immunity at Logic Low Output (Note 6) cml IF = 10mA VCM = 1500Vp_p RL = 20kH -10000 -15000 - V / jus (Note 6) : CMl is the maximum rate of fall of the common mode voltage that can be sustained with the output voltage in the logic low state (Vo