TLP114A 11-4C2 UL1577 E67349 030619EBC

TENTATIVE TOSHIBA Photocoupler GaAAs Ired + Photo-IC TLP114A(IGM) Transistor Invertor Inverter For Air Conditioner Line Receiver

TLP114A TLP114A(IGM) TENTATIVE TOSHIBA Photocoupler GaAAs Ired + Photo-IC TLP114A TLP114A(IGM) Transistor Invertor Inverter For Air Conditioner Line Receiver Ipm Interfaces Unit in mm The TOSHIBA mini flat coupler TLP114A TLP114A is a small outline coupler, suitable for surface mount assembly. TLP114A TLP114A consists of a high output power GaAAs light emitting diode, optically coupled to a high speed detector of one chip photo diode-transistor. TLP114A TLP114A(IGM) has no internal base connection, and a faraday shield integrated on the photodetector chip provides an effective common mode noise transient immunity. TLP114A TLP114A(IGM) guarantees minimum and maximum of propagation delay time, switching time dispersion, and high common mode transient immunity. There for TLP114A TLP114A(IGM) is suitable for isolation interface between IPM(intelligent power module) and control IC circuits in motor control application. TOSHIBA Weight: 0.09g 11-4C2 11-4C2 Isolation voltage: 3750Vrms(min.) Common mode transient immunity Pin Configuration(top view) : ±10kV/µs(min.) @VCM=1500V 6 1 Switching time: tpHL, tpLH=0.1µs(min.) =0.8µs(max.) 5 @IF=10mA, VCC=15V, 3 RL=20k, Ta=25°C Switching time dispersion: 0.7µs(max.) (|tpLH-tpHL|) 4 SHIELD 1 : Anode 3 : Cathode 4 : Emitter (GND) 5 : Collector (Output) 6 : VCC TTL compatible UL recognized: UL1577 UL1577, file no.E67349 E67349 Schematic IF ICC VCC 1 IO VF 3 1 6 VO 5 GND Shield 4 2004-12-28 TLP114A TLP114A(IGM) Maximum Ratings(Ta = 25°C) Characteristic Symbol Rating Unit (Note 1) IF 20 mA Pulse forward current (Note 2) IFP 40 mA Peak transient forward current (Note 3) IFPT 1 A Reverse voltage VR 5 V Output current IO 8 mA Peak output current IOP 16 mA Output voltage VO -0.5~20 V Supply voltage VCC -0.5~30 V PO 100 mW Operating temperature range Topr -55~100 °C Storage temperature range Tstg -55~125 °C Lead soldering temperature(10s) Tsol 260 °C BVS 3750 Vrms Detector LED Forward current Output power dissipation (Note 4) Isolation voltage(AC, 1min., R.H.60%, Ta=25°C) (Note 5) (Note 1): Derate 0.36mA above 70°C. (Note 2): 50% duty cycle, 1ms pulse width. Derate 0.72mA / °C above 70°C. (Note 3): Pulse width PW 1µs, 300pps. (Note 4): Derate 1.8mW / °C above 70°C. (Note 5): Device considerd a two terminal device: pins1, 3 shorted together and pins4, 5, 6 shorted together. 2 2004-12-28 TLP114A TLP114A(IGM) Electrical Characteristics(Ta = 25°C) Characteristic Test Condition Min. Typ. Max. Unit VF IF=16mA 1.22 1.42 1.72 V VF / Ta IF=16mA -2 mV / °C IR VR=3V 10 µA CT VF=0, f=1MHz 30 pF IOH(1) IF=0mA, VCC=VO=5.5V 3 500 nA IOH(2) IF=0mA, VCC=30V VO=20V 5 IOH IF=0mA, VCC=30V VO=20V, Ta=70°C 50 ICCH IF=0mA, VCC=30V 0.01 1 µA Supply voltage VCC ICC=0.01mA 30 V Output voltage LED Forward voltage Symbol VO IO=0.5mA 20 V Min. Typ. Max. Unit IF=10mA, VCC=4.5V VO=0.4V 25 35 75 IF=16mA, VCC=4.5V VO=0.4V, Ta=-25~100°C 15 IF=10mA, VCC=4.5V IO=2.4mA 0.4 V Min. Typ. Max. Unit 0.8 pF Forward voltage temperature coefficient Reverse current Capacitance between terminal Detector High level output current High level supply current µA Coupled Electrical Characteristics(Ta = 25°C) Characteristic Current transfer ratio Low level output voltage Symbol IO / IF VOL Test Condition % Isolation Characteristics(Ta = 25°C) Characteristic Symbol Capacitance input to output CS Isolation resistance RS Test Condition V=0, f=1MHz R.H.60%, VS=500V BVS 10 (Note 5) AC, 1 minute Isolation voltage (Note 5) 5×10 14 10 3750 AC, 1 second, in oil 10000 DC, 1 minute, in oil 10000 3 Vrms Vdc 2004-12-28 TLP114A TLP114A(IGM) Switching Characteristics(Ta = 25°C, VCC = 15V) Characteristic Test Cir- Cuit Symbol 1 Switching time dispersion between on and off |tpLH-tpHL| Common mode transient immunity at logic high output CMH (Note 6) Common mode transient immunity at logic low output 2 CML (Note 6) 0.45 0.8 0.1 0.45 0.9 IF=0 10mA, RL=20k Ta=-25~100°C 0.1 0.45 1.0 0.15 0.7 IF=10 0mA, RL=20k Ta=0~85°C (L H) 0.1 0.25 0.8 IF=10 0mA, RL=20k Ta=-25~100°C Propagation delay time Max. IF=10 0mA, RL=20k tpLH Typ. IF=0 10mA, RL=20k Ta=0~85°C (H L) Min. IF=0 10mA, RL=20k tpHL Propagation delay time Test Condition Unit 0.25 0.9 IF=0mA VCM=1500Vp-p RL=20k 10000 15000 V / µs IF=10mA VCM=1500Vp-p RL=20k -10000 -15000 V / µs µs µs (Note 6): CML is the maximum rate of fall of the common mode voltage that can be sustained with the output voltage in the logic low state (VO