TD62007P/F TD62007P TD62007F TD62007P/TD62007F DIP-16 DIP16-P-300-2 000707EBA

TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62007P,TD62007F 7CH DARLINGTON SINK DRIVER The TD62007P/TD62007F

TD62007P/F TD62007P/F TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62007P TD62007P,TD62007F TD62007F 7CH DARLINGTON SINK DRIVER The TD62007P/TD62007F TD62007P/TD62007F Series are high-voltage, high-current darlington drivers comprised of seven NPN darlington pairs. All units feature integral clamp diodes for switching inductive loads and protective diodes against a negative input voltage. The TD62007P TD62007P and TD62007F TD62007F are suitable for interfaces from minus and plus dual supply voltage system to plus single supply voltage system. Applications include relay, hammer, lamp and display (LED) drivers. Please observe the thermal condition for using. FEATURES Output current (single output) : 150 mA (Max) High sustaining voltage output : 22 V (Min) Output clamp diodes Protective diodes against a negative input voltage Inputs base resistor : RIN = 20 k Inputs compatible with 9~15 V PMOS, CMOS. Package type-P : DIP-16 DIP-16 pin Package type-F : SOP-16 pin Weight DIP16-P-300-2 DIP16-P-300-2.54A : 1.11 g (Typ.) SOP16-P-225-1.27 : 0.16 g (Typ.) PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER) Note: 1 The input and output parasitic diodes cannot be used as clamp diodes. 2001-07-16 TD62007P/F TD62007P/F MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC SYMBOL RATING UNIT VCE (SUS) -0.5~22 V Output Current IOUT 150 mA / ch Input Voltage VIN -37~22 V Clamp Diode Reverse Voltage VR 22 V Clamp Diode Forward Current IF 150 mA Output Sustaining Voltage P Power Dissipation F P Operating Temperature 1.0 0.625 (Note) W Topr -30~75 °C Tstg F Storage Temperature Note: PD -55~150 °C On Glass Epoxy PCB (30 × 30 × 1.6 mm Cu 50%) RECOMMENDED OPERATING CONDITIONS (Ta = -30~75°C) CHARACTERISTIC SYMBOL Output Sustaining Voltage CONDITION MIN TYP. MAX UNIT 0 20 V 1 Circuit 0 120 Tpw = 25 ms, Duty = 10%, 7 Circuits 0 100 VCE (SUS) Output Current IOUT Input Voltage VIN -35 20 V Clamp Diode Reverse Voltage VR 20 V Clamp Diode Forward Current IF 120 mA 0.44 0.325 MIN TYP. MAX UNIT P Power Dissipation Note: F PD Ta = 85°C (Note) mA W On Glass Epoxy PCB (30 × 30 × 1.6 mm Cu 50%) ELECTRICAL CHARACTERISTICS (Ta = 25°C) Collector-Emitter Saturation Voltage DC Current Transfer Ratio Input Current Input Voltage TEST CIR- CUIT 1 Ta = 75°C, VOUT = 20 V VIN = 1.0 V 100 µA VCE (sat) 2 VIN = 7.5 V, IOUT = 120 mA 1.6 V hFE Output Leakage Current SYMBOL ICEX CHARACTERISTIC 3 VCE = 2.0 V, IOUT = 120 mA 800 VIN = 7.5 V 0.7 mA VIN = -35 V -10 µA IOUT = 120 mA 7.5 1 "H" Level IIN (ON) "L" Level IIN (OFF) "H" Level VIN (ON) "L" Level VIN (OFF) 4 5 TEST CONDITION V Clamp Diode Reverse Current IR 6 VR = 20 V 30 µA Clamp Diode Forward Voltage VF 7 IF = 120 mA 1.6 V Turn-On Delay tON 0.1 tOFF VOUT = 20 V, RL = 167 CL = 15 pF Turn-OFF Delay 8 0.4 2 µs 2001-07-16 TD62007P/F TD62007P/F TEST CIRCUIT 1. ICEX 2. VCE (sat) 3. hFE 4. IIN (ON), IIN (OFF) 5. VIN (ON), VIN (OFF) 6. IR 7. VF 8. tON, tOFF Note 1: Pulse Width 50 µs, Duty Cycle 10% Output Impedance 50 , tr 5ns, tf 10ns Note 2: CL includes probe and jig capacitance. PRECAUTIONS for USING This IC does not include built-in protection circuits for excess current or overvoltage. If this IC is subjected to excess current or overvoltage, it may be destroyed. Hence, the utmost care must be taken when systems which incorporate this IC are designed. Utmost care is necessary in the design of the output line, COMMON and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 3 2001-07-16 TD62007P/F TD62007P/F 4 2001-07-16 TD62007P/F TD62007P/F PACKAGE DIMENSIONS DIP16-P-300-2 DIP16-P-300-2.54A Unit : mm Weight: 1.11 g (Typ.) 5 2001-07-16 TD62007P/F TD62007P/F PACKAGE DIMENSIONS SOP16-P-225-1.27 Unit : mm Weight: 0.16 g (Typ.) 6 2001-07-16 TD62007P/F TD62007P/F RESTRICTIONS ON PRODUCT USE 000707EBA 000707EBA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 7 2001-07-16