NEW DATABASE - 350 MILLION DATASHEETS FROM 8500 MANUFACTURERS
NEW DATABASE - 350 MILLION DATASHEETS FROM 8500 MANUFACTURERS
SUY101C SDSA4775 - Datasheet Archive
Part Number: www.SunLED.com 1.9x3.1mm RECTANGULAR SOLID LAMP Features HLOW POWER CONSUMPTION. HRELIABLE AND RUGGED. HEXCELLENT
SUY101C SUY101C Part Number: www.SunLED.com 1.9x3.1mm RECTANGULAR SOLID LAMP Features HLOW POWER CONSUMPTION. HRELIABLE AND RUGGED. HEXCELLENT UNIFORMITY OF LIGHT OUTPUT. HSUITABLE FOR LEVEL INDICATOR. HLONG LIFE-SOLID STATE RELIABILITY. HRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) ) UY (GaAsP/GaP) Unit Operating Characteristics (TA=25°C) ) UY (GaAsP/GaP) Unit Forward Voltage (Typ.) (IF=10mA) Reverse Voltage VR 5 V Forward Current IF 30 mA VF 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Forward Current (Peak) 1/10Duty Cycle 0.1ms Pulse Width iFS 140 mA Reverse Current (Max.) (VR=5V) IR 10 uA Power Dissipation PT 105 mW Operating Temperature TA -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=10mA) P 590 nm Tstg -40 ~ +85 Wavelength of Dominant Emission (Typ.) (IF=10mA) D 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Storage Temperature °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=10mA) mcd Wavelength nm P min. SUY101C SUY101C Yellow Published Date : MAY 15, 2006 GaAsP/GaP Yellow Transparent Drawing No : SDSA4775 SDSA4775 8 590 90° typ. 1.8 Viewing Angle 2 1/2 V3 Checked : B.L.LIU P.1/3 Part Number: www.SunLED.com SUY101C SUY101C 1.9x3.1mm RECTANGULAR SOLID LAMP UY Published Date : MAY 15, 2006 Drawing No : SDSA4775 SDSA4775 V3 Checked : B.L.LIU P.2/3 Part Number: www.SunLED.com SUY101C SUY101C 1.9x3.1mm RECTANGULAR SOLID LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAY 15, 2006 Drawing No : SDSA4775 SDSA4775 V3 Checked : B.L.LIU P.3/3