SS-219 MCB0603GTE300 MCB0603GTE400 MCB0603GTE600 MCB0603GTE750 MCB0603GTE800 - Datasheet Archive

 

SS-219 R4 Multi Layer Ferrite Chip Beads Type MCB CERTIFIED 1. General s Designed to reduce noise at high frequencies s Standard

 

SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 1 SS-219 SS-219 R4 Multi Layer Ferrite Chip Beads Type MCB CERTIFIED 1. General s Designed to reduce noise at high frequencies s Standard EIA Packages: 0603, 0805, 1206, 1806, 1812 s Nickel barrier with solder overcoat for excellent solderability s Magnetically shielded 2. 2.1 Dimensions Table 1 Dimensions - inches (mm) W H Part Solder 0.014±0.006 (0.36±0.15) 0.079±0.008 (2.00±0.20) 0.049±0.008 (1.25±0.20) 0.035±0.008 (0.90±0.20) 0.020±0.010 (0.51±0.25) 0.126±0.008 (3.20±0.20) 0.063±0.008 (1.60±0.20) 0.043±0.008 (1.10±0.20) 0.020±0.010 (0.51±0.25) 1806 P 0.031±0.006 (0.80±0.15) 0.177±0.010 (4.50±0.25) 0.063±0.010 (1.60±0.25) 0.063±0.010 (1.60±0.25) 0.020±0.010 (0.51±0.25) 1812 Terminations (metalization bands) 0.031±0.006 (0.80±0.15) 1206 H 0.063±0.006 (1.60±0.15) 0805 L L 0603 W 0.177±0.012 (4.50±0.30) 0.059±0.008 (1.50±0.20) 0.126±0.008 (3.20±0.20) 0.020±0.012 (0.50±0.30) P Nickel Silver Metalization Electrodes 3. Ordering and Specifying Information* MCB 0603 G TE 500 J Type Size Material Packaging Impedance Tolerance 0603 0805 1206 1806 1812 Permability Code: F G TE: 7" Embossed Plastic 2 Significant Figure TED: 13" Embossed + 1 Multiplier Plastic Example: 500 = 50 None: Bulk * Please note: KSE's part numbers do not contain any spaces or hyphens. Bolivar Drive s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 s Fax 814-362-8883 J:±5% K:±10% M:±20% P:±25% PAGE 1 OF 8 s www.koaspeer.com SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 2 SS-219 SS-219 R4 4. Standard Applications Impedance @ 100MHz MCB0603GTE300 MCB0603GTE300* MCB0603GTE400 MCB0603GTE400* MCB0603GTE600 MCB0603GTE600* MCB0603GTE750 MCB0603GTE750* MCB0603GTE800 MCB0603GTE800* MCB0603GTE900 MCB0603GTE900* MCB0603GTE101 MCB0603GTE101* MCB0603GTE121 MCB0603GTE121* MCB0603GTE141 MCB0603GTE141* MCB0603GTE151 MCB0603GTE151* MCB0603GTE181 MCB0603GTE181* MCB0603GTE221 MCB0603GTE221* MCB0603GTE301 MCB0603GTE301* MCB0603GTE421 MCB0603GTE421* MCB0603GTE601 MCB0603GTE601* MCB0603GTE102 MCB0603GTE102* MCB0603STE601 MCB0603STE601* MCB0805FTE050 MCB0805FTE050* MCB0805FTE070 MCB0805FTE070* MCB0805FTE100 MCB0805FTE100* MCB0805FTE110 MCB0805FTE110* MCB0805FTE170 MCB0805FTE170* MCB0805FTE300 MCB0805FTE300* MCB0805FTE400 MCB0805FTE400* MCB0805FTE500 MCB0805FTE500* MCB0805FTE600 MCB0805FTE600* MCB0805FTE750 MCB0805FTE750* MCB0805FTE800 MCB0805FTE800* MCB0805GTE900 MCB0805GTE900* Allowable DC Current (mA) 30 40 60 75 80 90 100 120 140 150 180 220 300 420 600 1,000 600 5 7 10 11 17 30 40 50 60 75 80 90 Ordering Code Maximum DC Resistance 0.1 0.1 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.35 0.4 0.5 0.6 0.65 0.07 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 400 400 300 300 300 250 250 250 250 250 250 250 230 210 200 190 200 600 600 600 600 600 600 600 600 600 400 400 400 Operating Temperature -55°C to 125°C TE: Embossed Plastic * Add Tolerance Character (J, K, M, P) Bolivar Drive s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 PAGE 2 OF 8 s Fax 814-362-8883 s www.koaspeer.com SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 3 SS-219 SS-219 R4 4. Standard Applications (continued) Impedance @ 100MHz Maximum DC Resistance Allowable DC Current (mA) MCB0805GTE101 MCB0805GTE101* MCB0805GTE121 MCB0805GTE121* MCB0805GTE151 MCB0805GTE151* MCB0805GTE181 MCB0805GTE181* MCB0805GTE201 MCB0805GTE201* MCB0805GTE301 MCB0805GTE301* MCB0805GTE401 MCB0805GTE401* MCB0805GTE421 MCB0805GTE421* MCB0805GTE601 MCB0805GTE601* MCB0805GTE751 MCB0805GTE751* MCB0805GTE102 MCB0805GTE102* MCB1206FTE190 MCB1206FTE190* MCB1206FTE260 MCB1206FTE260* MCB1206FTE300 MCB1206FTE300* MCB1206FTE310 MCB1206FTE310* MCB1206FTE500 MCB1206FTE500* MCB1206FTE600 MCB1206FTE600* MCB1206FTE700 MCB1206FTE700* MCB1206FTE800 MCB1206FTE800* MCB1206FTE900 MCB1206FTE900* MCB1206FTE101 MCB1206FTE101* MCB1206FTE121 MCB1206FTE121* MCB1206FTE201 MCB1206FTE201* MCB1206FTE301 MCB1206FTE301* MCB1206FTE601 MCB1206FTE601* MCB1206GTE102 MCB1206GTE102* MCB1206GTE152 MCB1206GTE152* MCB1806FTE800 MCB1806FTE800* 100 120 150 180 200 300 400 420 600 750 1,000 19 26 30 31 50 60 70 80 90 100 120 200 300 600 1,000 1,500 80 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.1 0.1 0.1 0.1 0.1 0.1 0.15 0.2 0.2 0.2 0.2 0.3 0.4 0.5 0.7 0.9 0.1 400 200 200 200 200 200 200 200 200 200 200 600 600 600 600 600 600 200 400 400 400 300 300 300 200 150 100 600 MCB1812GTE700 MCB1812GTE700* 70 0.1 500 Ordering Code Operating Temperature -55°C to 125°C TE: Embossed Plastic * Add Tolerance Character (J, K, M, P) Bolivar Drive s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 PAGE 3 OF 8 s Fax 814-362-8883 s www.koaspeer.com SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 4 SS-219 SS-219 R4 5. Characteristics Item Requirement Conditions Operating Temperature -55°C ~ +125°C Storage Temperature 40°C @ 70% Humidity Sealed plastic bags with desiccant shall be used to reduce the potential of oxidation on the terminations during storage. Resistance to Solder Heat Change in Impedance: Relative to value before test ±20%. Appearance: There shall be no cracking Solder Coverage: More than 75% of the terminal electrode shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Preheat: 150°C ±10°C Preheat Time: 60 sec Solder Temp: 260°C ±5°C Dip Time: 10 ±1 sec Solderability Solder Coverage: More than 95% of the termination shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Solder Temp: 245°C ±5°C Dip Time: 5 ±0.5 sec Leach Resistance Appearance: There shall be no visible signs of physical or mechanical damage (i.e. no cracks) Terminations: Termination must not be leached away for more than 5%. The bead shall be subjected to the following 5 steps for the period of time shown below. The 5 steps constitute one (1) rotation. 4 rotations shall be carried out. 1) Flux: 5-10 sec 2) After Flux: Air dry for 15 sec 3) Solder Temp: 230°C ±5°C 4) Dip Time: 5 ±0.5 sec 5) Cool: Air cool for 60 seconds Insulation Resistance Insulation Resistance: Min 1G ohms Solvent Resistance Change in Impedance: Relative to value before test ±10%. Terminal Strength (hanging test) Appearance: The terminal electrode shall not break off, nor shall there be damage to the body. Type 0603 0805 1206 1806 W(kgf) 0.5 1.0 1.5 1.5 Time 30 sec ±2 sec 30 sec ±2 sec 30 sec ±2 sec 30 sec ±2 sec Terminal Strength (push test) Appearance: There shall be no evidence of mechanical degradations to terminals or body. Type 0603 0805 1206 1806 W(kgf) 1.4 1.8 2.3 2.3 Time 60 sec 60 sec 60 sec 60 sec Cleaning by: Washer: Ultrasonic washer (100W) Solvent: Isopropyl alcohol Time: 3 minutes PAGE 4 OF 8 Bolivar Drive s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 s Fax 814-362-8883 s www.koaspeer.com SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 5 SS-219 SS-219 R4 5. Characteristics (continued) Item Requirement Conditions Bending Strength Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test ±10% Board: 90x40x1.6mm Bend: 1mm Time: 5 sec Mechanical Shock Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test ±10% Force: 50G Time: 11 msec There shall be 3 shocks in each of 6 directions (18 shocks total). Vibration Impedance: Relative to initial value ±10% Only endurance conditioning by sweeping shall be made. The entire frequency range from 10-2,000Hz and return to 10Hz in 20 minutes (this shall constitute one cycle). Amplitude: 1.5mm The test shall have a 15G peak and shall be applied for a period of 4 hours (12 cycles) in each of 3 mutually perpendicular directions (a total of 36 cycles within a total of 12 hours). Thermal Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value ±20%. DCR: The DCR shall not exceed initial specified value. Testing of the parts will be made at 0 hours, 250 hours and 500 hours. Before testing the parts shall be allowed to cool to room temperature for 24 hours. Load Humidity Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value ±15% Step 1-start 2-hold 3-transfer 4-hold 5-transfer Temperature -40°C ±2°C -40°C ±2°C - +105°C ±2°C - Time - 30 min ±5 min 0.5 min max. 30 min ±5 min 0.5 min max. Steps 1 thru 5 constitute one complete cycle and the test shall consist of a total of 500 cycles. Temperature: 85°C ±2°C Relative Humidity: 85% Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Life Test Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value ±15% Temperature: 85°C ±2°C Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. PAGE 5 OF 8 Bolivar Drive s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 s Fax 814-362-8883 s www.koaspeer.com SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 6 SS-219 SS-219 R4 6. Packaging Specifications KOA's multilayer components are provided on tape-and-reel for use in pick-and-place machines or in bulk for special applications. Both tape-and-reel and bulk products are sealed in plastic bags with desiccant. The reel size can be 7 inch or 13 inch, depending on customers' preference. 7. Dimensions - inches (mm) Tape Ao Bo Do P2 Po t Ko E 0603 0.043±0.002 0.075±0.002 0.043±0.002 (1608) (1.9±0.1) (1.1±0.1) (1.1±0.1) 0805 0.063±0.002 0.093±0.002 0.046±0.002 (2012) (1.6±0.1) (2.4±0.1) (1.2±0.1) F W Bo 1206 0.071±0.002 0.138±0.002 0.048±0.002 (3216) (1.8±0.1) (3.5±0.1) (1.2±0.1) 1806 0.065±0.004 0.204±0.004 0.065±0.004 (4516) (5.2±0.1) (1.7±0.1) (1.7±0.1) D1 Ao P1 Ko 1812 0.142±0.004 0.193±0.004 0.075±0.002 (4532) (3.6±0.1) (4.9±0.1) (1.9±0.1) Tape E F W P1 Po P2 Do D1 0603 (1608) 0805 0.069±0.004 0.138±0.002 0.318±0.002 0.157±0.004 0.157±0.004 0.079±0.002 0.059±0.004 0.039 min. (2012) (1.75±0.10) (3.50±.005) (8.1±0.1) (4.0±0.1) (4.0±0.1) (2.00±0.05) (1.5+0.1/-0.0) (1.0 min.) 1206 (3216) t 0.009±0.001 (0.23±0.02) 1806 0.069±0.004 0.217±0.002 .472+0.012/-0.004 0.157±0.004 0.157±0.004 0.079±0.002 0.059±0.004 0.059±0.010 0.009±0.001 (4516) (1.75±0.10) (5.5±0.05) (12.00+0.30/-0.10) (4.0±0.10) (4.0±0.10) (2.00±0.05) (1.5+0.1/-0.0) (1.5+0.25/-0.0) (0.23±0.02) 1812 0.039±0.004 0.217±0.002 0.472±0.008 0.315±0.004 0.157±0.004 (4532) (1.75±0.10) (5.5±0.05) (12.00±0.20) (8.0±0.10) (4.0±0.10) n/a 0.059±0.004 (1.5+0.1/-0.0) n/a 0.010±0.002 (0.25±0.05) 8. Chip Quantities Per Reel Chip Size Parts on 7 inch (178mm) Reel Parts on 13 inch (330mm) Reel 0603 (1608) 4,000 12,000 0805 (2012) 3,000 10,000 1206 (3216) 3,000 10,000 1806 (4516) 2,000 N/A 1812 (4532) 1,000 N/A PAGE 6 OF 8 Bolivar Drive s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 s Fax 814-362-8883 s www.koaspeer.com SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 7 SS-219 SS-219 R4 9. Recommended PC Board Land Patterns - mm (inches) Chip Size L G H 0603 (1608) 2.6 (0.102) 0.6 (0.023) 0.8 (0.031) 0805 (2012) 3.0 (0.118) 1.0 (0.039) 1.0 (0.039) 1206 (3216) 4.4 (0.173) 2.2 (0.087) 1.4 (0.055) G 1806 (4516) 5.7 (0.224) 2.7 (0.106) 1.4 (0.055) L 1812 (4532) 5.8 (0.228) 2.4 (0.094) 3.6 (0.142) H 10. Recommended Temperature Profiles for Soldering Recommended Temperature Profile for Wave Soldering Preheat 100 Seconds Max. Soldering 10 Seconds Max. Recommended Temperature Profile for Reflow Soldering Natural Cooling Preheat 100 Seconds Max. 250°C Soldering 10 Seconds Max. Natural Cooling 250°C 200°C 150°C 150°C 20 Seconds Max. 60 Seconds Max. 60 Seconds Max. PAGE 7 OF 8 Bolivar Drive s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 s Fax 814-362-8883 s www.koaspeer.com SS-219 SS-219 R4 (Printer's) 3/21/0 1:11 PM Page 8 SS-219 SS-219 R4 PAGE 8 OF 8 Bolivar Drive AHA 03/00 s P.O. Box 547 s Bradford, PA 16701 s USA s 814-362-5536 s Fax 814-362-8883 s www.koaspeer.com Notice: The information contained in this Tech Note is believed to be accurate and up-to-date. KOA Speer Electronics reserves this right to change these specifications without notice.