SPB-2820LWG SPB-2820BLWG 10GBASE-BX SFF-8472 10GBASE AT24C01A/02/04 - Datasheet Archive

 

SPB-2820LWG 1

 

Optoway SPB-2820LWG SPB-2820LWG 1 * SPB-2820LWG SPB-2820LWG / SPB-2820BLWG SPB-2820BLWG (RoHS Compliant) 1270 nm TX / 1330 nm RX , 10.3 Gbps Digital Diagnostic 1-Fiber SM LC SFP+ Transceiver * FEATURES DESCRIPTION l l l l l l l l l l l l l l l The SPB-2820LWG SPB-2820LWG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-BX 10GBASE-BX by using 1270 nm transmitter and 1330 nm receiver. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C series bus specified in the SFP MSA SFF-8472 SFF-8472. The transmitter section uses a multiple quantum well 1270 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1330 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. 1-Fiber Bi-Directional SFP Optical Transceiver Up to 10.3 Gbps Bi-directional Data Links Compliant with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-BX 10GBASE-BX SFF-8472 SFF-8472 Digital Diagnostic Function Simplex LC Connector 1270 nm DFB LD Transmitter 1330 nm Receiver Distance Up to 20 km AC/AC Coupling according to MSA Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operating: SPB-2820LWG SPB-2820LWG -10 to 85oC Operating: SPB-2820BLWG SPB-2820BLWG Class 1 Laser International Safety Standard IEC 60825 Compliant APPLICATIONS l 10G Ethernet Links LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. SPB-2820LWG SPB-2820LWG SPB-2820BLWG SPB-2820BLWG Bit Rate (Gb/s) 10.3 10.3 10GBASE 10GBASE Distance TX (km) (nm) BX 20 1270 DFB BX 20 1270 DFB RX (nm) 1330 1330 Package LC SFP+ with DMI LC SFP+ with DMI Temp (oC) 0 to 70 -10 to 85 RoHS Compliant Yes Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Symbol Tstg Topr Relative Humidity Power Supply Voltage Input Voltage RH Vcc - Min -40 0 -10 0 0 GND Max 85 70 85 85 3.6 Vcc Units o C o C Output Current Iout 0 30 mA Min 3.13 Typ 3.3 270 Max 3.47 320 70 85 % V V Notes SPB-2820LWG SPB-2820LWG SPB-2820BLWG SPB-2820BLWG Non condensing Recommended Operating Conditions Parameter Power Supply Voltage Power Supply Current Operating Case Temperature Data Rate Symbol Vcc ICC (TX+RX) Topr 0 -10 10.3125 Units / Notes V mA o C / SPB-2820LWG SPB-2820LWG o C / SPB-2820BLWG SPB-2820BLWG Gb/s * OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0 Optoway SPB-2820LWG SPB-2820LWG 2 * Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg c SMSR RIN Min -2 1260 Typ 1270 Max 2 1280 1 30 -128 -30 Units dBm nm nm dB dB/Hz dBm Notes 1 -20 dB width 1. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity at 10.3 Gb/s Receiver Overload LOS - Deasserted LOS - Asserted Wavelength of Operation Symbol Min Typ P MAX LOSD LOSA c 0.5 -30 1320 - Max -14 -18 -1340 Units dBm dBm dBm dBm nm Max Notes 2, Average Power Units Transition: low to high Transition: high to low 3 2. Measured with average power; BER < 10-12 and PRBS 2 31-1. 3. At least 30 dB optical isolation for the wavelength 1260 to 1280 nm. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 10.3125 100 150 350 2.0 GND 2.4 GND 700 Gb/s mVpp Gb/s mVpp Vcc+0.3 0.8 Vcc 0.5 V V V V 1000 10.3125 100 600 Notes Internally AC coupled Internally AC coupled * OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0 Optoway SPB-2820LWG SPB-2820LWG 3 * CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic "1" Output = Laser Fault. Logic "0" Output = Normal Operation Logic "1" Input (or no connection) = Laser off, Logic "0" = Laser on. Modulation Definition 2 ­ Two wires serial ID Interface Modulation Definition 1 ­ Two wires serial ID Interface Modulation Definition 0 ­ Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power ­ 3.3V±5% 16 17 VCCT VEET Transmitter Power ­ 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 AT24C01A/02/04 family of components. * OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0 Optoway SPB-2820LWG SPB-2820LWG 4 * RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 K TD + LD D river 18 TD + Z=50 100 TD - 19 TD Z=50 Vcc T 4 .7 H 16 Vcc 3.3V 0.1F 22 F 0.1F SerDes IC 0.1F Vcc R 15 0.1F RD - 22 F 4 .7 H 12 Protocol IC RD Z=50 100 POST Amp RD + 13 RD + Z=50 depending on SE D S RE 10 K LOS Vee R 8 RS1 30K 9 RS0 7 30K MOD_ABS EEPROM SCL SDA LOSS OF SINGAL ( 10,11,14) TX Rate Select RX Rate Select 6 MODU LE DETECT 5 SCL 4 SDA 10 K SFP+ module 10 K 10 K Vcc 3.3V PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. * OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0 Optoway SPB-2820LWG SPB-2820LWG 5 * REVISION HISTORY Version 1.0 2.0 Subject Initial datasheet Change wavelength to 1270 nm and 1330 nm to have less dispersion penalty. Release Date 2008/7/1 2009/1/1 * OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0