SIL30 EN60950 IEC60950 UL94V-0 MIL-HDBK-217F SIL30-12SADJ-V SIL30-12SADJ-H

Single output DC/DC CONVERTERS 30A Non-Isolated DC/DC Converters 1 NEW Product · Wide trim range (2.5V to 5.0V) ·

SIL30 SIL30 Series Single output DC/DC CONVERTERS 30A Non-Isolated DC/DC Converters 1 NEW Product · Wide trim range (2.5V to 5.0V) · Horizontal and vertical models available · High power density design means reduced board space requirement · Remote sense · Power good output signal (open collector) · Operating ambient temperature up to +80ºC with suitable derating and forced air cooling · Remote ON/OFF (active high) · Over-temperature protection · Over-current and short-circuit protection · Optional current share The SIL30 SIL30 Series is a new high density open-frame non-isolated converter for space sensitive applications. The converter has a wide input range (10.2 to 13.8Vdc) and offers a wide 2.5 to 5V output voltage range with a 30A load. The series offers remote ON/OFF, over-temperature protection and over-current protection as standard. Its current share facility supports parallel operation of multiple SIL30 SIL30 units and the remote sense feature enables the SIL30 SIL30 compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 EN60950 and UL/cUL60950 the SIL30 SIL30 reduces compliance costs and time to market. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability INPUT SPECIFICATIONS Contd. (See Note 1) 2.5V to 5.0V Output setpoint accuracy Using 1.0% trim resistors ±2.5% Turn ON threshold Turn OFF threshold 9.0V 8.3V Line regulation Low line to high line ±0.2% max. GENERAL SPECIFICATIONS Load regulation Full load to min. load ±1.0% max. Efficiency Min/max load 0A/30A Overshoot At turn-on 4.0% max. Undershoot At turn-off (See Note 2) 50mV pk-pk 15mV rms Transient response (See Note 3) Deviation Current share Full load 91% Fixed 300kHz Approvals and standards (See Note 7) TÜV Product Service IEC60950 IEC60950, UL/cUL60950 100mV max. Ripple and noise 5Hz to 20MHz Switching frequency Material flammability 75mV 150µs recovery to within regulation band UL94V-0 UL94V-0 Weight MTBF Representative model: ±10% 28.3g (1oz) MIL-HDBK-217F MIL-HDBK-217F 129,390 hours 12V model @ 40ºC 100% load, ground benign Bellcore 332 3,994,753 hours ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range Nominal 12V 10.2 to 13.8VDC Input current No load Remote OFF 230mA 30mA Input current (max.) (See Note 4) 13.8A max. @ Io max. and Vin = 10.8V Input reflected ripple (See Note 2) Thermal performance (See Note 8) Operating ambient, temperature Non-operating 0°C to +80°C -40°C to +125°C Altitude derating (above sea level) 3,000m (9,843 ft) 10,000m (32,808 ft) 20% 50% 150mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 5) Logic high >2.4VDC