10GBASE-LR 10GBASE-LW SFF-8431 SFF-8472 GR-468 MIL-STD-883E EN55022 21CFR - Datasheet Archive

 

10G Bi-directional SFP+ Transceiver Features Simplex LC Connector, Bi-directional Single 3.3V Supply 10km Minimum Reach

 

SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Features Simplex LC Connector, Bi-directional Single 3.3V Supply 10km Minimum Reach Commercial Temperature Available 1330nm DFB Laser transmitter, 1270nm receiver Compliant with IEEE 802.3-2005 10GBASE-LR 10GBASE-LR and 10GBASE-LW 10GBASE-LW SFP+ MSA SFF-8431 SFF-8431 Compliant Digital Diagnostic SFF-8472 SFF-8472 Compliant Telcordia GR-468 GR-468 Compliant Color Coded Bail Latch Tube: Green RoHS Compliant Regulatory Compliance Table 1 ­ Regulatory Compliance Feature Standard Electrostatic Discharge (ESD) to MIL-STD-883E MIL-STD-883E the Electrical Pins Method 3015.7 Electrostatic Discharge (ESD) at the Faceplate Electromagnetic Interference (EMI) Laser Eye Safety RoHS Compliance IEC 61000-4-2 Performance Class 1 (>1000 V) Compatible with Standards FCC Part 15 Class B EN55022 EN55022 Class B (CISPR 22B) Compatible with Standards VCCI Class B FDA 21CFR 21CFR 1040.10 and 1040.11 Compatible with Class 1 Laser EN60950 EN60950, EN (IEC) 60825-1,2 Product 2002/95/EC 2002/95/EC Compatible with Standards -1- DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Absolute Maximum Ratings Table 2 ­ Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Unit Ts -40 - +85 ºC Supply Voltage Vcc -0.5 - 4.0 V Operating Relative Humidity RH - - 85 % Symbol Min. Typical Max. Unit Supply Voltage Vcc 3.14 3.3 3.46 V Supply Current Icc - - 300 mA Pvcc - - 1 W IIN-RUSH - - 30 mA 1 Power Supply Noise Rejection PSR 66/99 - - mVp-p 2 Operating Temperature (Case) Topr -5 - 70 ºC DR 9.953 - 11.09 Gb/s Storage Temperature Notes Recommended Operating Conditions Table 3 ­ Recommended Operating Conditions Parameter Maximum Power Dissipation Inrush Current Data Rate Notes 3 Note 1: Max. duration 500ms Note 2: 66 mVp-p:10Hz-1MHz, 2% p-p, 3.3V power supply. 99 mVp-p: 1-10MHz, 3% p-p, 3.3V power supply. Note 3: Supports 10GE at 9.953, 10.3125 and 11.09 Gb/s, 10GFC 10GFC at 10.51 Gb/s. PRBS231-1 PRBS231-1. -2- DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Optical and Electrical Characteristics Table 4 ­ Transmitter Specifications (Optical) Parameter Symbol Min. Typical Max. Unit Optical Power Pop -8.2 - 0.5 dBm Optical Crosstalk XT - - -30 dB Average Launch Power Tx_Off Poff - - -30 dBm Extinction Ratio ER 3.5 - - dB Eye Mask Notes Compliant with IEEE 802.3 Mean Wavelength 1320 1330 1340 nm SMSR 30 - - dB RIN12OMA RIN12OMA RIN - - -128 dB/Hz Optical Modulation Amplitude OMA -5.2 - - dBm Launch Power in OMA minus TDP OMA-TDP -6.2 - - dBm Transmitter and Dispersion Penalty TDP - - 3.2 dB Optical Return Loss Tolerance - - - 12 dB Transmitter Reflectance - - - -12 dB Side Mode Suppress Ratio Table 5 ­ Receiver Specifications (Optical) Parameter Symbol Min. Typical Max. Unit Notes Average Receiver Power - -14.4 - 0.5 dBm 4 Receiver Sensitivity in OMA - - - 0.055(-12.6) mW(dBm) 5 Stressed Receiver Sensitivity in OMA - - - 0.093(-10.3) mW(dBm) 1260 - 1280 nm Pin, damage - - 4 dBm Receiver Total Jitter TJ - - 0.70 UI Receiver Deterministic Jitter DJ - - 0.42 UI Vertical Eye Closure Penalty - 2.2 - - dBm RX_r - - -12 dB LOS Assert - -30 - - dBm LOS De-Assert - - - -14.4 dBm LOS Hysteresis - 0.5 - - dB Wavelength Damage Threshold For Receiver Receiver Reflectance Note 4: Average Receiver Power (Min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant. Note 5: Measured with a PRBS231-1 PRBS231-1 test pattern @10.3125Gbps, BER10-12 BER10-12 -3- DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Table 6 ­ Electrical Specifications and Timing Parameter Symbol Min. Typical Max. Unit Rin 90 100 110 PECL Differential Data Input Swing Vin, p-p 400 - 1600 mV PECL Differential Data Output Swing Vout, p-p 300 600 900 mV Rout 80 100 120 VOL 0.0 - 0.4 V Input Differential Impedance Output Differential Impedance TX_Fault, RX_LOS Host_Vcc VOH -0.5 - Host_Vcc +0.3 V VIL -0.3 VIH 2.0 VIL -0.3 VIH 2.0 Tx Disable Negate Time t_on - - 2 ms Tx Disable Assert Time t_off - - 10 µs t_2w_start_up - - 300 ms Time to Initialize t_start_up - - 300 ms Tx Fault Assert Time t_fault_on - - 1 ms TX_Fault Reset 10 - - µs RX_LOS Assert delay t_loss_on - - 100 µs RX_LOS Negate delay t_loss_off - - 100 µs TX_Disable RS0, RS1 Time to Initialize 2-Wire Interface Tx Fault Reset - Notes 0.8 V VccT+0.3 V - 0.8 VccT+0.3 Diagnostics Table 7 ­ Diagnostics Parameter Range Accuracy Unit Calibration Temperature -5 to 70 ±3 ºC External Voltage 0 to Vcc 0.1 V External Bias Current 0 to 120 5 mA External Tx Power -8.2 to 0.5 ±3 dBm External Rx Power -14.4 to 0.5 ±3 dBm External -4- Formula Tc(C) = Tslope*Tad(16 bit signed twos complement value) + Toffset V(Volts) = Vslope*Vad (16 bit unsigned integer) + Voffset I(mA) = Islope * Iad(16 bit unsigned integer) + Ioffset Tx_PWR(µW) = Tx_PWRslope*Tx_PWRad (16 bit unsigned integer)+Tx_PWRoffset Rx_PWR(µW) = A0+A1*x+A2*x^2+A3*x^3+A4*x^4 DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Table 8 ­ EEPROM Serial ID (A0h) Name of Field Description of Field Address Hex Type of transceiver 0 03 Extended identifier of type of transceiver 1 04 Code for connector type 2 07 3 20 4 00 5 00 Code for electronic compatibility or optical 6 00 compatibility 7 00 8 00 9 00 10 00 Code for high speed serial encoding algorithm (64B/66B 64B/66B) 11 06 Nominal signalling rate, units of 100MBd. 12 67 Type of rate select functionality 13 00 Link length supported for single mode fiber, units of km 14 0A Length (SMF) Link length supported for single mode fiber, units of 100 m 15 64 Length (50µm) Link length supported for 50 um OM2 fiber, units of 10 m 16 00 Length (62.5µm) Link length supported for 62.5 um OM1 fiber, units of 10 m 17 00 Length (Copper) Link length supported for copper, units of meters 18 00 Link length supported for 50 um OM3 fiber, units of 10 m 19 00 SFP vendor name (ASCII) 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 53 4F 55 52 43 45 50 48 4F 54 4F 4E 49 43 53 20 Identifier Ext. Identifier Connector Transceiver Encoding BR.Nominal Rate Identifier Length (SMF,km) Length (OM3) Vendor Name -5- ASCII S O U R C E P H O T O N I C S [Space] DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Table 8 ­ EEPROM Serial ID (A0h) Name of Field Description of Field 37 00 38 1F 39 22 53 S 41 50 P 42 50 P 43 4C L 44 4F O 45 Source Photonics Inc. 00 40 Vendor OUI SFP vendor IEEE company ID for Hex 36 Unallocated Address ASCII 52 R 46 45 E SPPLORXEBXCDFA 48 42 B 58 X 43 C 51 44 D 52 46 F 53 41 A 54 20 [Space] 55 20 [Space] 56 41 A Revision level for part number provide by 57 20 [Space] vendor (ASCII) 58 20 [Space] 59 Wavelength 47 50 Vendor Rev. X 49 Vendor PN 58 Part number in ASCII, e.g. 20 [Space] 60 05 61 32 62 00 63 xx Indicates which optional transceiver signals 64 00 are implemented 65 1A Laser wavelength, 1330nm Unallocated CC_BASE Options Check code for Base ID Fields (addresses 0 to 62) -6- DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Table 8 ­ EEPROM Serial ID (A0h) Name of Field Description of Field Address Hex BR, max Upper bit rate margin, unit of % 66 00 BR, min Lower bit rate margin, unit of % 67 00 Vendor SN Serial number 68-83 xx Date Code Vendor's manufacturing date code 84-91 xx 92 68 93 F0 94 03 95 xx 96-127 xx Diagnostic Monitoring Type Enhanced Options SFF-8472 SFF-8472 Compliance CC_EXT Vendor Specific Indicates which type of diagnostic monitoring is implemented in the transceiver Indicates which optional enhanced features are implemented in the transceiver Indicates which revision of SFF-8472 SFF-8472 the transceiver complies with Check code for Extended ID Fields (addresses 64 to 94) Vendor Specific EEPROM -7- ASCII DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Table 9 ­ Pin Definitions Pin Symbol Name/Description 1 VeeT 2 TX_FAULT 3 TX_DISABLE 4 SDL 2-Wire Serial Interface Data Line (MOD-DEF2) 5 SCL 2-Wire Serial Interface Clock (MOD-DEF1) 6 MOD_ABS 7 RS0 8 RX_LOS 9 RS1 Rate Select 1 ­ Not in use 10 VeeR Module Receiver Ground 11 VeeR Module Receiver Ground 12 RXD- Receiver Inverted Data Output 13 RXD+ Receiver Non-Inverted Data Output 14 VeeR Module Receiver Ground 15 VCCR Module Receiver 3.3V Supply 16 VCCT Module Transmitter 3.3V Supply 17 VeeT Module Transmitter Ground 18 TXD+ Transmitter Non-Inverted Data Input 19 TXD- Transmitter Inverted Data Input 20 VeeT Module Transmitter Ground Module Transmitter Ground Module Transmitter Fault Transmitter Disable; Turns off transmitter laser output Module Absent, connected to VeeT or VeeR in the module Rate Select 0 ­ Not in use Receiver Loss of Signal Indication (in FC designated as RX_LOS, in SONET designated as LOS, and in Ethernet designated as NOT Signal Detect) Note 1. The module ground pins, VeeR and VeeT, shall be isolated from the module case. 2. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10K 7K-10K ohms to a Host_Vcc on the host board 3. Shall be pulled up with 4.7K-10K 7K-10K ohms to VccT in the module 4. This pin is an open collector/drain input pin and shall be pulled up with 4.7K-10K 7K-10K ohms to VccT in the module. -8- DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver SFP+ Module PCB Pinout Recommended Host Board Power Supply Circuit -9- DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Recommended Interface Circuit - 10 - DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Mechanical Diagram Units in mm - 11 - DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Order Information Table 10 ­ Order Information Part No. SPPL-OR-XE-BX-CDFA Part Numbering Definition: SPPL - OR - XE - BX - Temperature Diagnostic RoHS Revision SPPL = SFP+, Simplex LC Wavelength OR = Tx 1330nm/Rx 1270nm Data Rate XE = 10GbE Standard BX = 10km Reach Operating Temperature C = Commercial Temperature (-5 to 70 ) D = Digital Diagnostic (SFF-8472 SFF-8472) RoHS F = RoHS Compliant A = Design Revision - 12 - DS-5231 DS-5231 Rev 0.1 2009-04-22 SPPL-OR-XE-BX-CDFA 10G Bi-directional SFP+ Transceiver Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Source Photonics' sole and absolute discretion. Source Photonics warrants performance of its products to current specifications only in accordance with the company's standard one-year warranty; however, specifications designated as "preliminary" are given to describe components only, and Source Photonics expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of Sale for further warranty information. Source Photonics assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Source Photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Source Photonics customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Source Photonics for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. Customer agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Source Photonics to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. Contact U.S.A. Headquarters 20550 Nordhoff Street Chatsworth, CA 91311 USA Tel: +1-818-773-9044 Fax: +1-818-773-0261 sales@sourcephotonics.com China Building #2&5, West Export Processing Zone No. 8 Kexin Road, Hi-Tech Zone Chengdu, 611731, China Tel: +86-28-8795-8788 Fax: +86-28-8795-8789 sales@sourcephotonics.com.cn Taiwan 9F, No 81, Shui Lee Rd. Hsinchu, 300, Taiwan R.O.C. Tel: +886-3-5169222 Fax: +886-3-5169213 sales@sourcephotonics.com.tw © Copyright Source Photonics, Inc. 2007~2008 All rights reserved - 13 - DS-5231 DS-5231 Rev 0.1 2009-04-22