SFBD-155E2J1R GR-468 TS-1000 100BASE-BX/ TR-NWT-000253 IEC-61754-4 MIL-STD-883E

Small Form Factor Bi-Directional Transceiver Module for Fast Ethernet, ATM, SONET OC-3/SDH STM-1 FEATURES RoHS compliant 2x5 Pin

SFBD-155E2J1R SFBD-155E2J1R Small Form Factor Bi-Directional Transceiver Module for Fast Ethernet, ATM, SONET OC-3/SDH STM-1 FEATURES RoHS compliant 2x5 Pin SFF Package with SC Receptacle Single Mode Fiber, Bi-Directional Transmission with 1310nm Transmitter and 1550nm Receiver Link Distance up to 15km Single +3.3V power supply and PECL logic interface Wave Solderable and Aqueous Washable Bellcore GR-468 GR-468 compliant Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2 Description Application DELTA's SFF Bi-Directional transceiver is designed for point-to-point Bi-Directional Optical TTC TS-1000 TS-1000 ITU-T G.985 Network transmission. The module consists 1310nm FP laser, InGaAs PIN, Preamplifier and WDM filter in a high-integrated optical sub-assembly, and it receives up to 155Mbps of continuous data at 1550nm, and transmits 155Mbps of continuous data at 1310nm. The module is contained in a 2x5 SFF industry standard package with a SC receptacle IEEE 802.3ah 100BASE-BX/ 100BASE-BX/ Fast Ethernet SONET OC-3/SDH STM-1/ ATM Network FTTx Broadband Access System Performance connector, and support LVTTL transmitter disable input, LVPECL electrical signal Interface and receiver signal detect output. SFBD-E2J1R data link up to 15km in 9/125um single mode fiber. 1 DELTA ELECTRONICS, INC. Revision: S1 09/12/2006 www.deltaww.com SFBD-155E2J1R SFBD-155E2J1R 1. Absolute Maximum Ratings Parameter Storage Temperature Operating Ambient Temperature Storage Ambient Humidity Power Supply Voltage Signal Input Voltage Optical Input Power (Peak) Lead Soldering Temperature Lead Soldering Time Symbol Ts Ta HA VCC Min. -40 -10 5 -0.5 -0.3 Typ. Max. 85 80 95 5 Vcc+0.3 0 260 10 Unit ºC ºC % V V dBm ºC sec Min. 0 5 3.135 Typ. Max. 70 85 3.465 230 100 155.52 15 Unit ºC % V mA mVp-p Mbps km Max. -8 -5 Unit dBm dBm dB nm nm ns ns dB dB/Hz TSOLD tSOLD Note 2. Recommended Operating Conditions Parameter Ambient Operating Temperature Ambient Humidity Power Supply Voltage Power Supply Current Power Supply Noise Rejection Data Rate Transmission Distance Symbol TA HA VCC ICC 3.3 10 Note Without air flow Non-condensing 100Hz to 1MHz 3. Optical Specification of Transmitter Parameter Average Launched Power Launched power (Peak.) Extinction Ratio Center Wavelength Spectrum Width (RMS) Optical Rise/Fall Time Total Jitter Optical Return Loss Tolerance Relative Intensity Noise Output Eye Mask Symbol PO Min. -14 Typ. -11 ER 8.5 C 1260 1310 1360 6 tr/tf 1.3 tJ 1 ORLT 14 RIN -116 Compliant with Bellcore TR-NWT-000253 TR-NWT-000253 and ITU recommendation G.957 FP Laser Note (2) Note (3) Note (4) Note (1). Launched power (avg.) is power coupled into a single mode fiber. Note (2). These are unfiltered 20-80% values. Note (3). Measure at 223-1 NRZ PRBS pattern. 1.20 Note (4). Eye Mask definition 1.00 Amplitude Note Note (1) Mean level of logical "1" 0.80 0.50 0.20 0.00 Mean level of logical "0" -0.20 0.00 0.15 0.35 0.65 0.85 1.00 Time Optical Pulse Mask with Bessel Filter Specified in ITU-T G.957 2 DELTA ELECTRONICS, INC. Revision: S1 09/12/2006 www.deltaww.com SFBD-155E2J1R SFBD-155E2J1R 4. Optical Specification of Receiver Parameter Input Optical Wavelength Receiver Sensitivity Input Saturation Power (Overload) Signal Detect -Assert Power Signal Detect -Deassert Power Signal Detect Hysteresis Optical Receiver Reflectance Output Data Rise/Fall time S/X Endurance Optical Isolation Symbol IN PIN PSAT PA PD PA-PD Min. 1480 -3 -44 0.5 Typ. Max. 1600 -30 -30 2.5 6 -14 1.5 10 tr/tf 25 -10 Unit nm dBm dBm dBm dBm dB dB ns dB dB Note PIN-PD Note (1) Note (2) Note (3) Note (4) Note (5) Note (6) 23 Note (1). Measured with 1520nm, ER=10dB; BER =