PT100/3 - Datasheet Archive

 

· for 2 and 3 wire sensors MCZ PT100/3 CLP 0.100 °C / 0.120 °C / 0.150 °C / 0.200 °C / 0.300 °C

 

RTD Thermocouple Conditioners · for 2 and 3 wire sensors MCZ PT100/3 PT100/3 CLP 0.100 °C / 0.120 °C / 0.150 °C / 0.200 °C / 0.300 °C -50.+150 °C / -40.100 °C The temperature module converts measurement values from a PT 100 into analogue measurement signals. The module supplies the sensor with power. The module is distinguished by its accuracy and linearity. Block diagram Ordering data for TS 35 Type MCZ PT100/3 PT100/3 MCZ PT100/3 PT100/3 MCZ PT100/3 PT100/3 MCZ PT100/3 PT100/3 MCZ PT100/3 PT100/3 MCZ PT100/3 PT100/3 MCZ PT100/3 PT100/3 CLP CLP CLP CLP CLP CLP CLP 0.100 °C 0.120 °C 0.150 °C 0.200 °C 0.300 °C -50.+150 °C -40.100 °C PT 100 (according to IEC 751) 3-wire / 2-wire* each 50 max. 0.006 °C/ 0.8 mA Output Load Supply voltage Residual ripple of supply voltage Set time Accuracy Linearity Temperature coefficient 4.20 mA* 750 at 24 V max: 30V / min: 9 V+20mA x RL max: 1.5 V at 100 Hz 10 ms Type. 0.2 % max. 0.5 % v. FSR