PSMDA05C-4 PSMDA24C-4 RS-232 RS-423 EN61000-4 PSMDA12C-4 PSMDA15C-4 EIA-481

PSMDA05C-4 thru PSMDA24C-4 . . . engineered solutions for the transient environmentTM BIDIRECTIONAL MONOLITHIC TVS DIODE ARRA Y

05083 PSMDA05C-4 PSMDA05C-4 thru PSMDA24C-4 PSMDA24C-4 . . . engineered solutions for the transient environmentTM BIDIRECTIONAL MONOLITHIC TVS DIODE ARRA Y APPLICA TIONS RS-232 RS-232, RS-423 RS-423 Data Lines Cellular Phones Audio/Video Inputs Portable Electronics Wireless Network Systems IEC COMPA TIBILITY (EN61000-4 EN61000-4) SO-8 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns 61000-4-5 (Surge): 24A, 8/20µs Level 2(Line-Gnd) & Level 3(Line-Line) FEA TURES 500 Watts Peak Pulse Power Per Line (tp = 8/20µs) Bidirectional Monolthic Design Available in 4 Voltage Types Ranging from 5V to 24V Protects Up to Four (4) Lines ESD Protection > 40 kilovolts MECHANICAL CHARACTERISTICS Molded JEDEC SO-8 Weight 15 milligrams (Approximate) Flammability Rating UL 94V-0 12mm Tape and Reel Per EIA Standard 481 Device Marking: Marking Code & Logo Pin 1 Indicated By Dot on Top of Package CIRCUIT DIAGRAM 1 2 7 3 6 4 05083. R1 5/02 8 5 1 www.protekdevices.com PSMDA05C-4 PSMDA05C-4 thru PSMDA24C-4 PSMDA24C-4 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PSMDA05C-4 PSMDA05C-4 PSMDA12C-4 PSMDA12C-4 PSMDA15C-4 PSMDA15C-4 PSMDA24C-4 PSMDA24C-4 DEVICE MARKING TEB TED TEF TEH RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM PART NUMBER (See Note 1) @ 1mA V(BR) @ IP = 1A VC 5.0 12.0 15.0 24.0 6.0 13.3 16.7 26.7 9.8 19.0 24.0 43.0 MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE @8/20µs @VWM ID 0V @ 1 MHz C 19V @30A 29V @ 20A 32V @ 18A 45V @ 13A 100 1 1 1 350 150 120 100 Note 1: Test individual pins 8 or 5 to pins 1, 2, 3, or 4. Pins 6 and 7 are open. 05083.R1 5/02 2 www.protekdevices.com PSMDA05C-4 PSMDA05C-4 thru PSMDA24C-4 PSMDA24C-4 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 500W, 8/20µs Waveform 1,000 100 10 0.01 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t 20 IPP/2 0 0 5 10 15 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs 80 % Of Rated Power 20 60 40 20 Average Power 0 0 05083.R1 5/02 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com PSMDA05C-4 PSMDA05C-4 thru PSMDA24C-4 PSMDA24C-4 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-8 -A- 8 5 -B- 0.010" (0.25 MM) P M B M 4 PL 1 PACKAGE DIMENSIONS 4 DIM D G C R X 45º 0º - 10º -TJ K 0.010" (0.25 MM) M T B S F A S 8 PL MOUNTING PAD 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 5.00 0.189 0.196 4.00 0.150 0.157 1.75 0.054 0.068 0.49 0.014 0.019 1.250 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.25 0.004 0.008 6.20 0.229 0.244 0.50 0.010 0.019 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions "A" and "B" are Datum. 3. Dimensions "A" and "B" do not include mold protrusion. 4. Maximum mold protrusion is 0.015" (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 0.050" ± 0.005" 0.030" ± 0.005" 0.160" ± 0.005" A B C D F G J K P R MILLIMETERS MIN MAX 0.245" MIN 0.045" ± 0.005" 06009 Rev 1 -11/01 TAPE & REEL PACKAGING: Surface mount product is taped and reeled in accordance with EIA-481 EIA-481, reel quantites and sizes are as follows: 7 Inch Reel - 1,000 pieces per reel; 13 Inch Reel - 2,500 pieces per reel ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05083.R1 5/02 4 www.protekdevices.com