PSD03 PSD36C EN61000-4 PSD03C PSD05 PSD05C PSD08 PSD08C PSD12 PSD12C PSD15 - Datasheet Archive

 

PSD03 thru PSD36C Only One Name Means ProT ek'TionTM ST ANDARD CAPACIT ANCE TVS ARRA Y APPLICA TIONS Laptop Computers Cellular

 

05118 PSD03 PSD03 thru PSD36C PSD36C Only One Name Means ProT ek'TionTM ST ANDARD CAPACIT ANCE TVS ARRA Y APPLICA TIONS Laptop Computers Cellular Phones Digital Cameras Personnal Digital Assistant (PDA) IEC COMPA TIBILITY (EN61000-4 EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Ground) & Level 3(Line-Line) SOD-323 FEA TURES Unidirectional: 500 Watts Peak Pulse Power per Line (tp = 8/20µs) BidirectionalL 400 Watts Peak Pulse Power per Line (tp = 8/20µs) Unidirectional & Bidirectional Configurations Replacement for MLV (0805) Protects One Power or I/O Port ESD Protection > 40 kilovolts Low Clamping Voltage Available in Multiple Voltage Types Ranging from 3V to 36V MECHANICAL CHARACTERISTICS Molded JEDEC SOD-323 Weight 10 milligrams (Approximate) Flammability Rating UL 94V-0 8mm Tape and Reel Per EIA Standard 481 Device Marking: Marking Code & Polarity Band (Unidirectional Only) PIN CONFIGURA TIONS UNIDIRECTIONAL 1 1 2 05118.R5 10/03 BIDIRECTIONAL 2 1 www.protekdevices.com PSD03 PSD03 thru PSD36C PSD36C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Undirectional: Peak Pulse Power (tp = 8/20µs) - See Fig. 1 PPP 500 Watts Bidirectional: Peak Pulse Power (tp = 8/20µs) - See Fig. 1 PPP 400 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PSD03 PSD03 PSD03C PSD03C PSD05 PSD05 PSD05C PSD05C PSD08 PSD08 PSD08C PSD08C PSD12 PSD12 PSD12C PSD12C PSD15 PSD15 PSD15C PSD15C PSD18 PSD18 PSD18C PSD18C PSD24 PSD24 PSD24C PSD24C PSD36 PSD36 PSD36C PSD36C DEVICE MARKING A G B H C J D K E L G N F M R T RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM VOLTS PART NUMBER (See Notes 1-2) @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 18.0 18.0 24.0 24.0 36.0 36.0 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 20.0 20.0 26.7 26.7 40.0 40.0 6.5 7.0 9.8 9.8 13.4 13.4 19.0 19.0 24.0 24.0 29.0 29.0 43.0 43.0 60.0 60.0 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @8/20µs VC @ IPP @VWM ID µA @0V, 1 MHz CJ pF 10.9V @ 43.0A 10.9V @ 39.0A 13.5V @ 42.0A 14.5V @ 28.0A 16.9V @ 34.0A 18.5V @ 17.0A 25.9V @ 21.0A 29.5V @ 14.0A 30.0V @ 17.0A 33.0V @ 12.0A 40.0V @ 9.0A 40.0V @ 9.0A 49.0V @ 12.0A 46.2V @ 9.0A 75.0V @ 5.0A 75.0V @ 5.0A 125 125 10 10 10 10 1 1 1 1 1 1 1 1 1 1 500 200 350 175 250 150 150 50 100 40 90 40 88 40 75 35 Note 1: Part numbers with an additional "C" suffix are bidirectional devices, i.e., PSD05C PSD05C. Note 2: For Bidirectional Devices Only: Electrical characteristics apply in both directions. 05118.R5 10/03 2 www.protekdevices.com PSD03 PSD03 thru PSD36C PSD36C GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 10,000 500W, 8/20µs Waveform 1,000 400W, 8/20µs Waveform 100 10 0.01 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 0 FIGURE 3 POWER DERATING CURVE 100 5 10 15 t - Time - µs 20 25 30 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PSD03 PSD03 35 Peak Pulse Power 8/20µs 5 Volts per Division 80 % Of Rated Power FIGURE 2 PULSE WAVE FORM 60 40 20 25 15 5 Average Power -5 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 ESD Test Pulse: 25 kilovolt, 1/30ns (waveform) FIGURE 5 TYPICAL REVERSE VOLTAGE VS CAPACITANCE FOR PSD05 PSD05 400 C - Capacitance - pF 300 200 100 0 0 05118.R5 10/03 1 2 3 4 VR - Reverse Voltage - Volts 3 5 6 www.protekdevices.com PSD03 PSD03 thru PSD36C PSD36C PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOD-323 PACKAGE C A B E PACKAGE DIMENSIONS DIM D H F A B C D E F H MILLIMETERS MIN MAX INCHES MIN MAX 1.60 1.15 2.39 0.92 0.25 0.10 - 0.063 0.045 0.094 0.036 0.010 0.004 - 1.90 1.45 2.70 1.10 0.40 0.20 0.10 0.075 0.057 0.106 0.043 0.016 0.008 0.004 NOTES MOUNTING PAD 1. Controlling Dimensions in Millimeters. 2. Dimensions are exclusive of mold flash and metal burrs. 0.118" (3.00mm) TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481 EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PSD05C-T7 PSD05C-T7. 0.031" (0.80mm) 0.031" (0.80mm) Outline & Dimensions: Rev 1 - 11/01, 06010 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05118.R5 10/03 4 www.protekdevices.com