6202B RS-232 PM6202B RS232 PM6202B-CZ4 PM6202B-CW4 PM6202B-CW5

Version 1.07 Release Date:2009.12.9 PenMount 6202B Control Board Data Sheet RoHS compliance PenMount 6202B Control Board

Page 1 of 3 Version 1.07 Release Date:2009.12.9 PenMount 6202B 6202B Control Board Data Sheet RoHS compliance PenMount 6202B 6202B Control Board integrated features and functions for 4- and 5- wire resistive touch screens; both USB and RS-232 RS-232 interface with auto-detection; complemented by the superbly developed PenMount drivers with auto installation driver capability. PenMount 6202B 6202B Control Board using PenMount 6000 controller that has been designed for those who may like and all-in-one solution with A/D converter built-in to make the total printed circuit board denser. PM6202B PM6202B was designed-in with two kinds of connector. One is connected with touch screen directly for 4-wire or 5-wire selective. Another is supported to both of RS232 RS232 and USB interface. Specifications: Touch Screen For 4- or 5-wire analog resistive touch screens Interface USB Full speed 12MHz bps RS232 RS232 9600 baud rate non-PnP mode Touch Screen Controller PenMount 6000 controller IC Resolution 2048x2048 Dimension holes (L)70.0mm x (W)20.0mm x (H)10.3mm (max), two 3.0 screw Connector ZIF connector or Wafer connector on board for touch screen Diagnostic LED on board Cursor accuracy < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) Resistance range 30 ~ 1.3K ohm Operating Voltage +5V DC Power Consumption Standby Mode : 13.8 mA ; Active Mode : 21.8 mA ( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm ) Note. Actual current will be different by touch panel's resistance. Electro Static Discharge Air Discharge 15KV , Contact Discharge 8KV (ESD) Storage Temperature Operating Temperature -40 ~ 85 -20 ~ 70 Driver Software: RS232 RS232 interfaceDOS, Windows 2000/ XP/ XPE/ 2003/ Vista/ 7, WinCE 4.2/ 5.0/ 6.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3/ 6.4 USB interfaceWindows 2000/ XP/ XPE/ 2003/ Vista/ 7, WinCE 4.2/ 5.0/ 6.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3/ 6.4 (Inbox support) Website: http://www.penmount.com E-mail: penmount@seed.net.tw Page 2 of 3 Version 1.07 Release Date:2009.12.9 PenMount 6202B 6202B Control Board Data Sheet Mechanical Drawing: PM6202B-CZ4 PM6202B-CZ4 PM6202B-CW4 PM6202B-CW4 Website: http://www.penmount.com E-mail: penmount@seed.net.tw Page 3 of 3 Version 1.07 Release Date:2009.12.9 PenMount 6202B 6202B Control Board Data Sheet PM6202B-CW5 PM6202B-CW5 Connector and Jumper definition: CON2: For USB and RS-232 RS-232 Interface: J1 / J3 / CON4 / CON5: Connect to 4- and 5-wire Touch Screen: J1 / CON5 (5-wire) J3 (4-wire) CON4 (4-wire) PIN 1 UL (Y) Top Top PIN 2 UR (H) Left Left PIN 3 Sense (S) Bottom Bottom PIN 4 LL (L) Right Right PIN 5 LR (X) N/A N/A The available 6202 control board - PM6202B-CW5 PM6202B-CW5 : 5-wire, Wafer Connector pitch 2.54mm ; RS232 RS232 & USB COMBO Interface PM6202B-CW4 PM6202B-CW4 : 4-wire, Wafer Connector pitch 2.54mm ; RS232 RS232 & USB COMBO Interface PM6202B-CZ4 PM6202B-CZ4 : 4-wire, ZIF Connector pitch 1.0mm (Dual side) ; RS232 RS232 & USB COMBO Interface Website: http://www.penmount.com E-mail: penmount@seed.net.tw