PC8240FS PC8240 PC107 128MB PCX8240 BP123

PC8240 Integrated PowerPCTM Processor Fact Sheet The PC8240 Integrated PowerPCTM processor fits applications where cost, space,

PC8240FS PC8240FS - Rev.1 01/11 PC8240 PC8240 Integrated PowerPCTM Processor Fact Sheet The PC8240 PC8240 Integrated PowerPCTM processor fits applications where cost, space, power consumption and performance are critical requirements. This device provides a high level of integration, reducing chip count from five discrete chips to one, thereby significantly reducing system component cost. High integration results is a simplified board design, less power consumption and faster time -to-market solution. This general purpose integrated processor targets systems using PCI interfaces in networking infrastructures, telecommunications, and other embedded markets. It can be used for control processing in applications such as routers, switches, network storage applications and image display systems. PC8240 PC8240 Main Features n n n n n n n n 100-200 MHz PowerPC 603e TM core 32-bit PCI interface operating up to 66 MHz Memory controller offering SDRAM support up to 100 MHz operation General Purpose I/O and ROM interface support Two-channel DMA controller that supports chaining Messaging unit with I2 O messaging support capability Industry-standard I2 C interface Programmable Interrupts Controller (EPIC) with multiple timers and counters 603e Core 603e Core Data Path ECC Controller Control I2O DMA Data Memory Interface Central Central Control Control Unit Unit Addr Fast/EDO DRAM, SDRAM, ROM, FLASH SDRAM_SYNC_IN I2C DLL SDRAM Clocks CPU Clocks PLL PCI_SYNC_IN EPIC PCI Interface Timers Address Translator 32-bit PCI Interface PCI Arbiter 5 Req/Gnt Pairs Fanout Buffers OSC_IN PCI Bus Clocks PC8240 PC8240 Technical Specifications n n n n n n PowerPC 603e core - High-performance, superscalar processor core - Floating-point unit (selectable), integer, load/store, system register and branch processing unit - 16KB instruction cache and 16KB data cache - Lockable portion of L1 cache - Dynamic power management - JTAG/COP for in-circuit hardware debugging PCI Interface - Compliant with PCI specification, revision 2.1 - 32-bit PCI interface operates up to 66 MHz - PCI 5.0V tolerant - Support for accesses to all PCI address spaces - Store gathering of processor-to-PCI writes and PCI-to-memory writes - Selectable big or little endian operation - PCI interface can be configured as host or agent, allowing multiple PC107 PC107 chips on same PCI bus - Arbiter supports up to 5 other PCI devices - Parity support (selectable) Memory Interface - High bandwidth (32/64-bit) data bus up to 100 MHz - Programmable timing supporting either DRAM (FPM, EDO) or SDRAM - Support 1 to 8 banks - 4MB, 16MB, 64MB, and 128MB 128MB DRAMs or SDRAMs - 1GB of RAM space, 16MB of ROM space - 8-bit, 32-bit, or 64-bit ROM - PortX: 8-, 32-, or 64-bit general-purpose I/O port uses ROM controller interface with address strobe - Supports parity, read-modify-write, or error correcting code (ECC) Other Embedded Features - Two-Channel integrated DMA controller - I2 O Message Unit and I2 C controller - Embedded Programmable Interrupt Controller (EPIC) - Integrated PCI bus and SDRAM clock generation - Programmable PCI and memory bus drivers Packaging - 352 TBGA package Screening - TBGA upscreening based upon ATMEL-Grenoble standards - Full military temperature range (Tj = -55°C, + 125°C) - Industrial temperature range (Tj = -40°C, +110°C) PC8240 PC8240 M TP U 200 Type (PCX8240 PCX8240 if prototype) (C) Revision level Temperature range : Tc Max internal processor speed M: -55, +125°C V: -40, +110°C 200: 200 MHz 250: 250 MHz (tbc) Package: TP: TBGA Screening level: U: Upscreening For additional information: contact your local ATMEL-Grenoble representative or visit our web site at http://www.atmel-grenoble.com You may also contact the PowerPC technical hotline at std.hotline@atmel-grenoble.com The PowerPC and PowerPC603e names and the PowerPC logotype are trademarks of International Business Machines Corporation, used under license therefrom. Specifications and information herein are subject to change wi thout notice. BP123 BP123 - 38521 Saint- Egrève Cedex - France - Tel: +33 (0)4 76 58 30 00 - Fax: +33 (0)4 76 58 34 80 PC8240FS PC8240FS - Rev.1 01/11 PC8240 PC8240 Integrated PowerPCTM Processor Fact Sheet The PC8240 PC8240 Integrated PowerPCTM processor fits applications where cost, space, power consumption and performance are critical requirements. This device provides a high level of integration, reducing chip count from five discrete chips to one, thereby significantly reducing system component cost. High integration results is a simplified board design, less power consumption and faster time -to-market solution. This general purpose integrated processor targets systems using PCI interfaces in networking infrastructures, telecommunications, and other embedded markets. It can be used for control processing in applications such as routers, switches, network storage applications and image display systems. PC8240 PC8240 Main Features n n n n n n n n 100-200 MHz PowerPC 603e TM core 32-bit PCI interface operating up to 66 MHz Memory controller offering SDRAM support up to 100 MHz operation General Purpose I/O and ROM interface support Two-channel DMA controller that supports chaining Messaging unit with I2 O messaging support capability Industry-standard I2 C interface Programmable Interrupts Controller (EPIC) with multiple timers and counters 603e Core 603e Core Data Path ECC Controller Control I2O DMA Data Memory Interface Central Central Control Control Unit Unit Addr Fast/EDO DRAM, SDRAM, ROM, FLASH SDRAM_SYNC_IN I2C DLL SDRAM Clocks CPU Clocks PLL PCI_SYNC_IN EPIC PCI Interface Timers Address Translator 32-bit PCI Interface PCI Arbiter 5 Req/Gnt Pairs Fanout Buffers OSC_IN PCI Bus Clocks PC8240 PC8240 Technical Specifications n n n n n n PowerPC 603e core - High-performance, superscalar processor core - Floating-point unit (selectable), integer, load/store, system register and branch processing unit - 16KB instruction cache and 16KB data cache - Lockable portion of L1 cache - Dynamic power management - JTAG/COP for in-circuit hardware debugging PCI Interface - Compliant with PCI specification, revision 2.1 - 32-bit PCI interface operates up to 66 MHz - PCI 5.0V tolerant - Support for accesses to all PCI address spaces - Store gathering of processor-to-PCI writes and PCI-to-memory writes - Selectable big or little endian operation - PCI interface can be configured as host or agent, allowing multiple PC107 PC107 chips on same PCI bus - Arbiter supports up to 5 other PCI devices - Parity support (selectable) Memory Interface - High bandwidth (32/64-bit) data bus up to 100 MHz - Programmable timing supporting either DRAM (FPM, EDO) or SDRAM - Support 1 to 8 banks - 4MB, 16MB, 64MB, and 128MB 128MB DRAMs or SDRAMs - 1GB of RAM space, 16MB of ROM space - 8-bit, 32-bit, or 64-bit ROM - PortX: 8-, 32-, or 64-bit general-purpose I/O port uses ROM controller interface with address strobe - Supports parity, read-modify-write, or error correcting code (ECC) Other Embedded Features - Two-Channel integrated DMA controller - I2 O Message Unit and I2 C controller - Embedded Programmable Interrupt Controller (EPIC) - Integrated PCI bus and SDRAM clock generation - Programmable PCI and memory bus drivers Packaging - 352 TBGA package Screening - TBGA upscreening based upon ATMEL-Grenoble standards - Full military temperature range (Tj = -55°C, + 125°C) - Industrial temperature range (Tj = -40°C, +110°C) PC8240 PC8240 M TP U 200 Type (PCX8240 PCX8240 if prototype) (C) Revision level Temperature range : Tc Max internal processor speed M: -55, +125°C V: -40, +110°C 200: 200 MHz 250: 250 MHz (tbc) Package: TP: TBGA Screening level: U: Upscreening For additional information: contact your local ATMEL-Grenoble representative or visit our web site at http://www.atmel-grenoble.com You may also contact the PowerPC technical hotline at std.hotline@atmel-grenoble.com The PowerPC and PowerPC603e names and the PowerPC logotype are trademarks of International Business Machines Corporation, used under license therefrom. Specifications and information herein are subject to change wi thout notice. BP123 BP123 - 38521 Saint- Egrève Cedex - France - Tel: +33 (0)4 76 58 30 00 - Fax: +33 (0)4 76 58 34 80