JOG-00741 OF3610B-C2 PRBS223 OF3610B OF3610B-C2-AFFC OF3610B-C2-AF - Datasheet Archive
001 OKI Electronics Components OF3610B-C2 Rev. 8 [1. 2006] 622Mbps APD-preamplifier coaxial module with a single mode fiber 1.
JOG-00741 JOG-00741 001 OKI Electronics Components OF3610B-C2 OF3610B-C2 Rev. 8 [1. 2006] 622Mbps APD-preamplifier coaxial module with a single mode fiber 1. DESCRIPTION OF3610B-C2 OF3610B-C2 is an optical receiver module for digital transmission systems up to 622Mbps. It uses an InGaAs avalanche photodiode with a low noise preamplifier. Package style is a hermetically sealed coaxial package with a single mode fiber pigtail. 2. FEATURES Data rate up to 622Mbps High responsivity InGaAs-APD : 8.5A/W Wide dynamic range Typical sensitivity : -40.5dBm Low noise Small coaxial package 3. APPLICATION Long-haul transmission systems up to 622Mbps 4. OPTICAL AND ELECTRICAL CHARACTERISTICS Parameter Wavelength APD Breakdown Voltage Temperature Coefficient of VBR* APD Responsivity Responsivity (Wavelength=1310nm , Tc =25°C , Vcc=3.3V, unless otherwise specified) Symbol Test Conditions Min. Typ. Max. Unit - 1250 -1620 nm VBR ID=10µA 40 60 80 V RAPD R Bandwidth BW Sensitivity Prmin Overload Prmax - 0.10 0.15 0.25 %/°C =1.55µm,VB=35to78V,M=10 =1.31µm,VB=35to78V,M=10 RL=100, M=10, Differential f3dB, RL=100, M=10 622.08Mbps, NRZ, BER=10-10, PRBS223 PRBS2231, M=Mopt. 622.08Mbps, NRZ, BER=10-10, PRBS223 PRBS2231, 8.0 7.5 8.5 8.5 - A/W 42 50 - kV/W 430 470 - MHz - -40.5 -38.5 dBm -7 -5 - dBm - 21 30 3.0 - 3.3 - 3.6 -27 mA V dB M=3 Supply Current ICC Recommended TIA Supply Voltage VCC Optical Return Loss Pin = 0mW ORL - *) Temperature Coefficient of Breakdown Voltage. = VB(25C+TC) - VB(25C) VB(25C)TC 100 (% / C) 1/5 001 JOG-00741 JOG-00741 Rev.8 OKI Electronics Components OF3610B-C2 OF3610B-C2 5. ABSOLUTE MAXIMUM RATING (Tc = 25 °C, unless otherwise specified) Parameter Symbol Rating Unit VB Vcc IF IR Tc Tstg 0 to VBR 6.0 4 1(cw) -40 to +85 -40 to +85 V V mA mA °C °C APD Bias Voltage TIA Supply Voltage APD Forward Current APD Reverse Current Operating Temperature Storage Temperature 6. CONNECTOR AND FIBER SPECIFICATIONS Parameter Type Mode Field Diameter Cladding Diameter Jacket Diameter Length Standard Connector Specifications SM 10 125 900 1 (Min.) FC/PC or SC/PC Unit -µm µm µm m - 7. ORDERING INFORMATION OF3610B OF3610B - C2 - _ _ _ _ Flange Connector AF: Angled FC SF: Straight SC LC NF:No Flange MU ex.) OF3610B-C2-AFFC OF3610B-C2-AFFC OF3610B-C2 OF3610B-C2 with an angled flange and FC connector. 8. OUTLINE DRAWING All dimensions in millimeters PACKAGE NO. OF3610B-C2-AF OF3610B-C2-AF_ 2/5 001 JOG-00741 JOG-00741 Rev.8 OKI Electronics Components OF3610B-C2 OF3610B-C2 PACKAGE NO. OF3610B-C2-SF OF3610B-C2-SF_ PACKAGE NO. OF3610B-C2-NF OF3610B-C2-NF_ Pin Connection 1 VCC 2 VAPD 3 VOUT+ 4 VOUT 5 GND(case) 2. VAPD 1. VCC APD 4. VOUT 3. VOUT+ Pre-Amp 5. GND(case) 3/5 001 JOG-00741 JOG-00741 Rev.8 OKI Electronics Components OF3610B-C2 OF3610B-C2 SAFETY INFORMATION ON THIS PRODUCT The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled, ingested or swallowed. GaAs Do not destory or burn the product. Product Do not crush or chemically dissolve the product. Do not put the product in the mouth. Observe related laws and company regulations when discarding this product. The product should be excluded from general industrial waste or household garbage. Caution A glass-fiber is attached on the product. Handle with care. Optical Fiber When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments. Caution 4/5 001 JOG-00741 JOG-00741 Rev.8 OKI Electronics Components OF3610B-C2 OF3610B-C2 Notice 1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. 2. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. 3. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. 4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. 5. Neither indemnity against nor license of a third party's industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. 6. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. 7. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. 8. No part of the contents contained herein may be reprinted or reproduced without our prior permission. Sales Support JAPAN/ASIA Oki Electric Industry Co., Ltd. 550-1, Higashiasakawa-cho, Hachioji-shi, Tokyo 193-8550 Phone: +81-426-62-6647 INTERNET: http://www.oki.com AMERICA Oki Optical Components 785 North Mary Avenue, Sunnyvale, CA 94086 Phone: +1-408-737-6379 Fax: +1-408-737-6579 INTERNET: http://www.okioptical.com EUROPE Oki Electric Europe GmbH D-41460 D-41460 Neuss, Germany Phone: +49-2131-15960 Fax: +49-2131-103539 INTERNET: http://www.okisemi.com/eu/ Copyright 2006 Oki Electric Industry Co., Ltd 5/5